PDA

View Full Version : [Mining] [RS3] Varrock Miner



Renzanity
05-13-2015, 01:09 PM
***[RS3] Mining Trainer***
http://i.imgur.com/Dzl8xFT.pngVarrock Minerhttp://i.imgur.com/xiG5BIb.png

Version: 1.72
Status: Working


Features:
-100% COLOR
-Progress Report (Debug and Paint)
-Rafiki Player Form
-SPS Mapping
-Antiban
-Mines Copper & Tin, Copper, Tin, Clay or Iron
-XP counter
-Ore Counter (Using DTM)
-Failsafes
-Breaks
-Option to power mine or to bank
-Option to bank using presets or quick deposit
-Option of what preset to use when banking using presets
-Gem counter
-Changeable antiban percentage
-Changeable quick key to use for dropping ores

Features to be added:
-Leave suggestions below

What it basically does:
-Mines for ore at both the Varrock West or East Mining area
-Banks or drops and repeats

Requirements:
-Varrock Lodestone must be unlocked
-(Preferrably) With a rune pickaxe on your toolbelt, so your pickaxe changes as your mining lvl goes up along the way.

Instructions:

1. Be sure that your client is properly setup. Click me (https://villavu.com/forum/showthread.php?t=107365)

2. Have your players setup in the Rafiki Player Manager.

http://i.imgur.com/HnutHzO.png

3. Start anywhere!

4. If you want to use presets as a way to deposit your ore, save your preset as an empty backpack.

5. If power mining, place the ore you're mining on your actionbar with your specified quick key

6. Wear lightweight clothing. (Long runs from bank to mine and vice versa)

7. Place your XP tracker on the upper right corner of your chatbox like so:

http://i.imgur.com/KBHLnFs.png



Progress Reports:


Progress Report by Garden of Sinners's powermining

/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 03h 39m 17s |
| No. of breaks taken: 2 |
| No. of iron mined: 2,124 pcs |
| No. of iron/hr: 581 pcs |
| Total XP Gained: 84,099 xp |
| Total XP/hr: 23,010 xp |
\=======================================/

1.71
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 08h 40m 55s |
| No. of breaks taken: 0 |
| No. of iron mined: 4,643 pcs |
| No. of iron/hr: 535 pcs |
| Total XP Gained: 162,638 xp |
| Total XP/hr: 18,732 xp |
\=======================================/

1.71
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 10h 03m 06s |
| No. of breaks taken: 0 |
| No. of iron mined: 5,396 pcs |
| No. of iron/hr: 537 pcs |
| Total XP Gained: 197,202 xp |
| Total XP/hr: 19,619 xp |
\=======================================/


Progress Report by rkroxpunk


v1.62
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 04h 36m 00s |
| No. of breaks taken: 1 |
| No. of iron mined: 1,741 pcs |
| No. of iron/hr: 378 pcs |
| Total XP Gained: 58,615 xp |
| Total XP/hr: 12,742 xp |
| Sapphire collected: 4 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 1 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 547,183 gp |
| Estimated Profit/hr: 118,950 gp |
\=======================================/


Varrock Miner v1.4 testing proggy



1.4
/============================================\
|================ Varrock Miner =============|
|============================================|
| Time Ran: 03h 08m 53s |
| No. of breaks taken: 0 |
| No. of iron mined: 1591 pcs |
| No. of iron/hr: 505 pcs |
| Total XP Gained: 55685 xp |
| Total XP/hr: 17688 xp |
| Sapphire collected: 5 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 500967 gp |
| Estimated Profit/hr: 159131 gp |
\============================================/


Varrock Miner v1.2 testing proggy (mining at the west mine)


v1.2
/============================================\
|================ Varrock Miner =============|
|============================================|
| Time Ran: 08h 14m 28s |
| No. of breaks taken: 1 |
| No. of clay mined: 5408 pcs |
| No. of clay/hr: 656 pcs |
| Total XP Gained: 26650 xp |
| Total XP/hr: 3234 xp |
| Sapphire collected: 6 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 1 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 1588922 gp |
| Estimated Profit/hr: 192800 gp |
\============================================/


Varrock Miner v1.2 testing proggy (mining at the east mine)


v1.2
/============================================\
|================ Varrock Miner =============|
|============================================|
| Time Ran: 07h 13m 17s |
| No. of breaks taken: 1 |
| No. of iron mined: 3831 pcs |
| No. of iron/hr: 531 pcs |
| Total XP Gained: 130270 xp |
| Total XP/hr: 18039 xp |
| Sapphire collected: 3 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 1216502 gp |
| Estimated Profit/hr: 168457 gp |
\============================================/


Varrock Miner v1.0 testing proggy


v1.0
/============================================\
|================ Varrock Miner =============|
|============================================|
| Time Ran: 04h 33m 32s |
| No. of breaks taken: 2 |
| No. of iron mined: 2265 pcs |
| No. of iron/hr: 497 pcs |
| Total XP Gained: 79275 xp |
| Total XP/hr: 17389 xp |
| Sapphire collected: 1 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 1 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 738996 gp |
| Estimated Profit/hr: 162096 gp |
\============================================/


A v2.6.2 proggy


v2.6.2
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 11h 25m 01s |
| No. of breaks taken: 3 |
| No. of clay mined: 7417 pcs |
| No. of clay/hr: 650 pcs |
| Total XP Gained: 86975 xp |
| Total XP/hr: 7618 xp |
| Sapphire collected: 10 pcs |
| Emerald collected: 3 pcs |
| Ruby collected: 1 pcs |
| Total Profit: 1082016 gp |
| Estimated Profit/hr: 94772 gp |
\==================================/


A v2.5 proggy


v2.5
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 02h 19m 15s |
| No. of breaks taken: 0 |
| No. of iron mined: 1145 pcs |
| No. of iron/hr: 493 pcs |
| Total XP Gained: 38255 xp |
| Total XP/hr: 16483 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 253234 gp |
| Estimated Profit/hr: 109110 gp |
\==================================/


A v2.4 proggy


v2.4
/===================================\
|========Varrock West Miner=========|
|===================================|
| Time Ran: 07h 41m 24s |
| No. of breaks taken: 3 |
| No. of iron mined: 3663 pcs |
| No. of iron/hr: 476 pcs |
| Total XP Gained: 126245 xp |
| Total XP/hr: 16416 xp |
| Sapphire collected: 2 pcs |
| Emerald collected: 3 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 807753 gp |
| Estimated Profit/hr: 105037 gp |
\===================================/


A v2.3 proggy


v2.3
/=====================================\
|=========Varrock West Miner==========|
|=====================================|
| Time Ran: 18h 18m 37s |
| No. of breaks taken: 7 |
| No. of Clay mined: 12214 pcs |
| No. of Clay/hr: 667 pcs |
| Total XP Gained: 61018 xp |
| Total XP/hr: 3332 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 7 pcs |
| Ruby collected: 3 pcs |
| Total Profit: 2141708 gp |
| Estimated Profit/hr: 116967 gp |
\=====================================/




v1.0
/======================================\
|=======Varrock West Iron Miner========|
|======================================|
| Time Ran: 58m 47s |
| No. of breaks taken: 0 |
| No. of iron mined: 476 pcs |
| No. of iron/hr: 486 pcs |
| Total XP Gained: 16030 xp |
| Total XP/hr: 16360 xp |
| Total Profit: 99960 gp |
| Estimated Profit/hr: 102016 gp |
\======================================/



Sample:
http://i.imgur.com/WEExn2p.png
http://i.imgur.com/rENKFMt.png
http://i.imgur.com/mrTRhR1.png
http://i.imgur.com/8bcxBkT.png
http://i.imgur.com/mf5vr4V.png
http://i.imgur.com/sgeg3up.png
http://i.imgur.com/O2Z4A77.png
http://i.imgur.com/PpG5EjH.png
http://i.imgur.com/WNbJQwe.png
http://i.imgur.com/Vj09CpN.png
http://i.imgur.com/ZrSq1Ih.png
http://i.imgur.com/9rp01bb.png



Changelog:

Varrock Miner v1.72 release
-Changed the mining procedure to detecting if your player is still animating
-Added an auto client reload for when the script's been running for approximately 8hrs already
-Added a function to close the popup when you reach lvl10 (From The Mayor's VEB Miner)

Varrock Miner v1.71 release
-Fixed the part where the script mines for copper and tin but doesn't count them correctly

Varrock Miner v1.7 release
-Rewritten thescript to shorten some parts of the it

Varrock Miner v1.66 release
-Quick fix on the copper and tin mining lines

Varrock Miner v1.65 release
-Fixed the power miner (fixed item dropping)

Varrock Miner v1.64 release
-You can now specify what Quick Key to use to drop your ore
-Changed the SPS map for it was too small
-Changed the findObj function to be able to click on offsets and not just the middle of the ATPA
-Some minor fixes on some procedures

Varrock Miner v1.63 release
-Edited the findObj function to click random offsets from the middle of the ATPA

Varrock Miner v1.6 release
-Updated the DTMs
-Updated the Varrock West mine paths

Varrock Miner v1.5 release
-Updated the DTMs (hopefully that fixes the power mining issue)
-Now banks by randomly clicking the bank booth or the banker
-Updated progress report

Varrock Miner v1.4 release
-Revised the Updater again (please download the new one)
-Changed the banking procedure (removed the booleans 'preNum' and 'deopOption')
-Now makes a folder for all the files for this script and downloads the files there
-Edited the DTMs for the gems (It works now I think?)
-Reduced the minibreak wait time to randomRange(5seconds, 15seconds)
-Added mouseMovingObject on the antiban. (See the SRL include for more info)
-Changed the code for mining Tin and Copper at the same time

Varrock Miner v1.3 is now open for testing
-Added an auto updater on the script itself to automatically download a new version when you run the script. (Be sure to check for a new script frequently for I edit the script every so often)
-Auto downloads the SPS map and paint images and placing them on their respective folders
-Edited the toMine(); procedure
-When mining for Tin and Copper, it randomly mines the stones instead of mining them 14x14
-Edited the Areas for polygons
-Fixed the progress report procedure
-Uploaded a new Varrock Miner Updater file (download it again if you have downloaded the old ones)

Varrock Miner v1.2 is now open for testing
-You can now choose how to deposit your ores (Using a preset or just plain quickdeposit)
-You can choose what preset to use when depositing ores

Varrock Miner v1.0 is now open for testing!
-You can now mine on either Varrock West or East mining areas
-You can now mine for Copper
-You can also mine for both Tin & Copper
P.S. Don't forget to grab the new SPS Map for this.




Please report any bug you find or suggestions as a post below.:norris:

Richard
05-13-2015, 02:50 PM
Haven't got Simba downloaded, so can't really test it and comment. But I noticed that you ask for the iron price as an input, but you could probably quite easily read it from the GE API that Jagex provides, to save you time, this (http://services.runescape.com/m=itemdb_rs/api/catalogue/detail.json?item=440) is the JSON page for iron ore. Not sure if we have any useful libraries from interpreting JSON data, but you could quite easily find the price by using some simple string methods.

Renzanity
05-13-2015, 03:11 PM
Haven't got Simba downloaded, so can't really test it and comment. But I noticed that you ask for the iron price as an input, but you could probably quite easily read it from the GE API that Jagex provides, to save you time, this (http://services.runescape.com/m=itemdb_rs/api/catalogue/detail.json?item=440) is the JSON page for iron ore. Not sure if we have any useful libraries from interpreting JSON data, but you could quite easily find the price by using some simple string methods.

Hello,

Thanks for the suggestion!

Will implement it on the script right now. I didn't know where to declare grandExchange.getPrice()(which uses the IDs from JSON), but thanks to Taric(thank you), I now know how.

Have a good one!

Renzanity
05-13-2015, 04:10 PM
v1.1 release
-Now automatically grabs the price of iron.
-Updated the SPS path.

Renzanity
05-14-2015, 06:22 AM
v2.0 release
-Can now mine 'Tin', 'Clay' and 'Iron'
-Added an option to power mine or not
--Added an option to drop the gems or not
-Added gem counter
-Turned the antiBan into a minibreak
-New paint proggy

Please post any bug you find, I don't have enough time to test it out because I'll be busy with RL stuff these next few days.

Have a good one and enjoy!

Renzanity
05-14-2015, 09:49 AM
v2.1 release
-Altered the break procedure
-Fixed a parentheses problem on the Run Time timer
-Fixed the problem with locating tin ore rocks

Renzanity
05-15-2015, 03:18 AM
v2.2 release
-Altered the power miner; Now drops the gems automatically, regardless of setting the drop gems function active or not. As to get rid of the gem counter bug
-Altered the logIn() procedure
-Changed the path coordinates for running to the mining area

Renzanity
05-16-2015, 02:51 AM
v2.3 release
-Fixed the breaking issues
-Now shows what you are mining on the debug progress report
-Now lets you specify the percentage of the antiban being initiated on the playerform
-Shortened the minibreak from (30secs to 2mins) to (10secs to 30secs) to maximize your mining exp/hr

Renzanity
05-17-2015, 06:01 AM
v2.3 testing's done!


v2.3
/=====================================\
|=========Varrock West Miner==========|
|=====================================|
| Time Ran: 18h 18m 37s |
| No. of breaks taken: 7 |
| No. of Clay mined: 12214 pcs |
| No. of Clay/hr: 667 pcs |
| Total XP Gained: 61018 xp |
| Total XP/hr: 3332 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 7 pcs |
| Ruby collected: 3 pcs |
| Total Profit: 2141708 gp |
| Estimated Profit/hr: 116967 gp |
\=====================================/


Gonna add a little more stuff on the script and v2.4 will be the last update.

lisapvm24
05-19-2015, 04:22 AM
I can vouch that this worked whilst mining clay. Thank-you.

Renzanity
05-19-2015, 06:24 AM
v2.4 release
-Added more failsafes
-Removed the drop gem function
-Updated the colors for each ore



v2.4
/===================================\
|========Varrock West Miner=========|
|===================================|
| Time Ran: 10h 42m 31s |
| No. of breaks taken: 5 |
| No. of iron mined: 5055 pcs |
| No. of iron/hr: 472 pcs |
| Total XP Gained: 174965 xp |
| Total XP/hr: 16338 xp |
| Sapphire collected: 6 pcs |
| Emerald collected: 6 pcs |
| Ruby collected: 1 pcs |
| Total Profit: 1121959 gp |
| Estimated Profit/hr: 104770 gp |
\===================================/

Renzanity
05-20-2015, 01:04 PM
v2.5 release
-Changed the SPS map
-Added a very nifty snippet by The Mayor, it's called SPS.isInPolygon(). You can find out more about it, here (https://villavu.com/forum/showthread.php?t=110898). I used it as a failsafe for when your character suddenly feels like strolling off the radar. If it does wander off the map, this failsafe's going to trigger and use the Varrock Lodestone to bring you back. If your backpack's full, you will be walked to the bank; if not, you'll be walked back to the mining area.

P.S.
It's still a little buggy because the map's too big to cover a good enough area, so if you have any suggestions let me know.

EDIT:
v2.5 proggy


v2.5
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 03h 48m 22s |
| No. of breaks taken: 1 |
| No. of iron mined: 1844 pcs |
| No. of iron/hr: 484 pcs |
| Total XP Gained: 62720 xp |
| Total XP/hr: 16478 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 408348 gp |
| Estimated Profit/hr: 107280 gp |
\==================================/

The Mayor
05-20-2015, 02:11 PM
v2.5 release
-Changed the SPS map
-Added a very nifty snippet by The Mayor, it's called SPS.isInPolygon(). You can find out more about it, here (https://villavu.com/forum/showthread.php?t=110898). I used it as a failsafe for when your character suddenly feels like strolling off the radar. If it does wander off the map, this failsafe's going to trigger and use the Varrock Lodestone to bring you back. If your backpack's full, you will be walked to the bank; if not, you'll be walked back to the mining area.

P.S.
It's still a little buggy because the map's too big to cover a good enough area, so if you have any suggestions let me know.

TBH, that should probably included with SPS.

Renzanity
05-20-2015, 02:48 PM
TBH, that should probably included with SPS.

Will it be pushed to the SPS include? This is a really neat addition for SPS IMO. I wonder why it's not included in the tutorials by now.

Renzanity
05-20-2015, 03:17 PM
To the person who downloaded v2.5, please grab the new SPS map again, I forgot to change the link on the instructions tab(my bad).:p

rickhunley
05-20-2015, 09:10 PM
Thanks for updates. Is there a way for the script to wait two seconds after successfully getting ore, to then click on the next available ore? There seems to be a long wait time sometimes between identifying rocks. Is this for antiban purposes? One more request :P Is there a way to add variation to the breaks and session times? Just that if I'm seen to be logging out every 20 minutes, I guess that will raise flags ha. Okay thanks man and keep it up.

rickhunley
05-21-2015, 01:02 AM
http://i.imgur.com/1RI2dbs.png

Three hour proggy using VPS and level three miner @ beginning.

Renzanity
05-21-2015, 02:07 AM
Thanks for updates. Is there a way for the script to wait two seconds after successfully getting ore, to then click on the next available ore? There seems to be a long wait time sometimes between identifying rocks. Is this for antiban purposes? One more request :P Is there a way to add variation to the breaks and session times? Just that if I'm seen to be logging out every 20 minutes, I guess that will raise flags ha. Okay thanks man and keep it up.

Hello rick,

Thanks for trying the script out and raising some of your concerns, I'm sure we can figure something out.

For your first concern, if you are mining somewhere crowded, it will be a difficult for your miner. (i.e You're mining lvl's 15 and you want to mine Iron, but there are other bots that are mining iron..I suggest that you mine some tin until you reach about lvl 41 and above so you can compete for ores.)

And as for the wait time, if the debug says "Initiating Minibreak.." then yes, it's the antiban being triggered. If not, please provide a screenshot or a more detailed explanation of what's actually happening.

For your last concern, you can change your breaks anytime. The script provides that kind of feature. But if your concern's about "Does it take a break EXACTLY how much time I put it?" Then my answer's no, if you chose to take a break after 20mins there will be deductions or additions to that exact amount of time as seen in this line in the script:

if (BreakTimer.getTime() >= ((breakT + randomRange(-5, 6)) * 60000)) then
takeBreak(); {*There is a 5min deduction or addition to the amount of time you provided before it does take a break*}


I hope that clears up your worries. If not, tell me.:)

http://i.imgur.com/1RI2dbs.png

Thanks for the proggy. Forgot to put the XP tracker on the upper right hand side of your chatbox huh?:P

Have a good one.

rickhunley
05-21-2015, 02:34 AM
Hello rick,

Thanks for trying the script out and raising some of your concerns, I'm sure we can figure something out.

For your first concern, if you are mining somewhere crowded, it will be a difficult for your miner. (i.e You're mining lvl's 15 and you want to mine Iron, but there are other bots that are mining iron..I suggest that you mine some tin until you reach about lvl 41 and above so you can compete for ores.)

And as for the wait time, if the debug says "Initiating Minibreak.." then yes, it's the antiban being triggered. If not, please provide a screenshot or a more detailed explanation of what's actually happening.

For your last concern, you can change your breaks anytime. The script provides that kind of feature. But if your concern's about "Does it take a break EXACTLY how much time I put it?" Then my answer's no, if you chose to take a break after 20mins there will be deductions or additions to that exact amount of time as seen in this line in the script:

if (BreakTimer.getTime() >= ((breakT + randomRange(-5, 6)) * 60000)) then
takeBreak(); {*There is a 5min deduction or addition to the amount of time you provided before it does take a break*}


I hope that clears up your worries. If not, tell me.:)

http://i.imgur.com/1RI2dbs.png

Thanks for the proggy. Forgot to put the XP tracker on the upper right hand side of your chatbox huh?:P

Have a good one.

That's great thanks. When you get a chance could you please add a fail safe of when your bot accidently clicks subscribe or one of the purchase buttons? Mine did haha, and then it couldn't click 'Continue Game'. Thanks :)

jagaren
05-21-2015, 02:11 PM
I got it to work once, then I get this all the time.

lease wait...now installing Renzanity's VW Miner image assets to your computer...
-- INSTALLATION STATUS: Script Paint exists.
Successfully logged you in..
Error: Invalid floating point operation at line 335 (now its giving me Error: Invalid floating point operation at line 349)
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

Renzanity
05-21-2015, 02:27 PM
I got it to work once, then I get this all the time.

lease wait...now installing Renzanity's VW Miner image assets to your computer...
-- INSTALLATION STATUS: Script Paint exists.
Successfully logged you in..
Error: Invalid floating point operation at line 335
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]
Hello,

Are you sure you got the latest version? Because upon checking the script, line 335 is just var. Can you provide more info about it? Maybe tell me what's on line 335 for you or a screenshot of the line highlighted by SIMBA upon initiation of the error.

Thanks for raising your concern.

jagaren
05-21-2015, 03:04 PM
here's the screenshot

25988

Renzanity
05-21-2015, 03:12 PM
here's the screenshot

25988

Did you try re-downloading the script? It seems to be working fine for me.

jagaren
05-21-2015, 03:14 PM
I did, it's working now but not without resistance. I have to restart it multiple times but on this time that it started working I tried putting it into compatibility mode for windows xp and it worked first try. So I'm not sure if that fixed it or it just randomly started working again.



EDIT: I stopped it and turned it back on and I'm getting the same error again.

jagaren
05-21-2015, 03:23 PM
Do you want me to post my pc specs?


EDIT: I've tried re-downloading the script, reinstalling simba, changing the installation location, turning on compatibility mode for windows XP and run as admin. It seems to only work 10% of the time, I'm getting the same error so I can only assume its something wrong with the script.



Please wait...now installing Renzanity's VW Miner image assets to your computer...
-- INSTALLATION STATUS: Script Paint exists.
Successfully logged you in..
Error: Invalid floating point operation at line 349
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

Renzanity
05-21-2015, 03:50 PM
Do you want me to post my pc specs?

Did you check your RS3 interface if they are in the up and up? 'Click Me' (https://villavu.com/forum/showthread.php?t=107040) or 'Me' (https://villavu.com/forum/showthread.php?t=47714)

jagaren
05-21-2015, 04:37 PM
I went through the video to make sure I did it right and its all correct. I followed the guide on the forums


EDIT:

Also idk if you noticed that I posted the wrong error on my first post. its on a different line.

Please wait...now installing Renzanity's VW Miner image assets to your computer...
-- INSTALLATION STATUS: Script Paint exists.
Successfully logged you in..
Error: Invalid floating point operation at line 349
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

jagaren
05-21-2015, 04:50 PM
I think the problem is the exp/profit per hour numbers, its extremely high when i first start it. http://i.imgur.com/Nn5mYo2.png

jagaren
05-21-2015, 04:51 PM
I think the error has something to do with the exp, gold earned per hour. When I finally get it to launch it starts off with extremely high numbers. 25989

Renzanity
05-21-2015, 05:06 PM
I think the error has something to do with the exp, gold earned per hour. When I finally get it to launch it starts off with extremely high numbers. 25989

Try deleting the pRep(); procedure at line 518, see if that works.

EDIT:
The high numbers doesn't really matter, it will simmer down after a few loads.

jagaren
05-21-2015, 05:55 PM
That seems to have fixed the problems, thankyou for helping :).

I noticed that the exp/profit thing isn't showing up anymore, was that the problem?

Renzanity
05-21-2015, 06:03 PM
That seems to have fixed the problems, thankyou for helping :).

I noticed that the exp/profit thing isn't showing up anymore, was that the problem?

Probably because it's getting a null in the /hr calculations when trying to run at the beginning of the script.

Enjoy and have a good one!

Renzanity
05-21-2015, 06:37 PM
v2.6 release
-Fixed the areaCheck(); glitch
-Removed the pRep(); procedure at the start of the script to avoid future floating point operation errors
-Edited the Instructions tab. You may now start ANYWHERE when running this script. It will detect when you're not on the area and will bring you to the area via Varrock lodestone.

Richard
05-21-2015, 11:03 PM
v2.6 release
-Fixed the areaCheck(); glitch
-Removed the pRep(); procedure at the start of the script to avoid future floating point operation errors
-Edited the Instructions tab. You may now start ANYWHERE when running this script. It will detect when you're not on the area and will bring you to the area via Varrock lodestone.

I expect it's a logic error, trying to divide by zero. ScriptTimer.getTime / 60000 it probably either rounding to an int, or the FP is not high enough, so goes to 0. The only reason it does this at the start is because it's the only time the value is low. I'd advise changing the logic for the calculation. E.g


xppms := (currentXP / ScriptTimer.getTime); //XP per ms at this point
xpph := xpms / 3600000; //convert to hour

This should work at any time except when t = 0, but to prevent the logic error, you can always chuck the calculations in an if statement checking for t = 0.

Usual disclaimer: haven't programmed simba in years

Renzanity
05-22-2015, 01:04 AM
I expect it's a logic error, trying to divide by zero. ScriptTimer.getTime / 60000 it probably either rounding to an int, or the FP is not high enough, so goes to 0. The only reason it does this at the start is because it's the only time the value is low. I'd advise changing the logic for the calculation. E.g


xppms := (currentXP / ScriptTimer.getTime); //XP per ms at this point
xpph := xpms / 3600000; //convert to hour

This should work at any time except when t = 0, but to prevent the logic error, you can always chuck the calculations in an if statement checking for t = 0.

Usual disclaimer: haven't programmed simba in years

Hello Richard,

Thanks again for your wonderful input.:D When I woke up, I did some alterations on the declarations for the oresPH and xpPH. Instead of placing them under 'integer', I declared them as 'extended'. I've had a similar problem in my other script, where tls pointed out the logic was calculating to a 0, resulting to the same error as with the one here today.

v2.6.1 release
-Refixed the floating point problem
-Replaced the old SPS paths with new ones
-Removed the experimental world hopping after breaks

jagaren
05-22-2015, 10:54 AM
Hey, I'm sure this isn't the correct place to ask about this but is it possible to run multiple instances of simba? As in different scripts at the same time or the same script but on a different server? If there is a guide I'd love a link to it :).

The Mayor
05-22-2015, 08:03 PM
Will it be pushed to the SPS include? This is a really neat addition for SPS IMO. I wonder why it's not included in the tutorials by now.

Yep https://github.com/SRL/SPS/commit/f32202126aa128c9b195897f87cb5fa620909553

You will need to remove/change name in your script(s) so you don't get a duplicate declaration :)

Renzanity
05-22-2015, 08:29 PM
Yep https://github.com/SRL/SPS/commit/f32202126aa128c9b195897f87cb5fa620909553

You will need to remove/change name in your script(s) so you don't get a duplicate declaration :)

Thank you for the update, sir. :D

Renzanity
05-22-2015, 08:30 PM
v2.6.2 release
-Removed the TSPSArea.isInPolygon function for it has been pushed to the SPS include so duplicate declarations will be avoided

currynoodle
06-17-2015, 08:21 AM
Hi. Not sure if isn't intended, but when set to mine Iron Ore, the character only mines the lone ore on the east side of the mine and omits the 2 more close-knit ores to the west.

Edit: Disregard everything I say, I'm a scrub. Found out that all I needed to do was zoom out.

Edit2: Started at level 20-ish mining

/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 04h 03m 14s |
| No. of breaks taken: 3 |
| No. of clay mined: 1791 pcs |
| No. of clay/hr: 442 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 1 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 244315 gp |
| Estimated Profit/hr: 60264 gp |
\==================================/

currynoodle
06-29-2015, 01:29 PM
Hope this warrants a 2nd post. Been running the script pretty often without problems. Today however, I came back to it stuck at the bank and continuously clicking the purchase bank boosts button, with about maybe 50 tabs of solomon store open on my browser. Not too sure what caused it to happen.

Edit: Wasn't the script's problem. Just had to update the SRL. Script still working beautifully.

TiToxic
07-03-2015, 07:17 PM
Please wait...now installing Renzanity's VW Miner image assets to your computer...
-- INSTALLATION STATUS: Script Paint exists.
Successfully logged you in..
Error: Invalid floating point operation at line 331
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

hello this is the issue i have all the time right now and i don't know how to fix this i've tried looking elsewhere for the same problem but couldn't fix it. This may be just me fcking up thing as i am new to this.

So forget what i just said it worked now but it sais walking to mining area and still i'm at varrock loadstone and not moving so i still don't know what to do ...

flakazoid
07-29-2015, 01:08 AM
Please wait...now installing Renzanity's VW Miner image assets to your computer...
-- INSTALLATION STATUS: Script Paint exists.
Successfully logged you in..
Error: Invalid floating point operation at line 331
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

hello this is the issue i have all the time right now and i don't know how to fix this i've tried looking elsewhere for the same problem but couldn't fix it. This may be just me fcking up thing as i am new to this.

So forget what i just said it worked now but it sais walking to mining area and still i'm at varrock loadstone and not moving so i still don't know what to do ...

The line in question where you get the invalid floating point operation is:

xpPH := round((currentXp * 60) / (ScriptTimer.getTime() / 60000));

Which alludes to an earlier point where the script reads your current xp using chatBox.getXpBar().

Make sure you have the xp tracker open and somewhere in the chatbox.

If this still does not resolve the issue, the script can function perfectly fine without the xp tracking if you just comment out (//) or remove line 331.

Thanks Renzanity for a true work of art:


/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 09h 25m 58s |
| No. of breaks taken: 6 |
| No. of iron mined: 4139 pcs |
| No. of iron/hr: 439 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 2 pcs |
| Total Profit: 843480 gp |
| Estimated Profit/hr: 89419 gp |
\==================================/

TransicK
08-11-2015, 08:21 AM
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 04h 56m 33s |
| No. of breaks taken: 2 |
| No. of iron mined: 2124 pcs |
| No. of iron/hr: 430 pcs |
| Total XP Gained: 74340 xp |
| Total XP/hr: 15040 xp |
| Sapphire collected: 2 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 468600 gp |
| Estimated Profit/hr: 94805 gp |
\==================================/

Script worked very well. No problems. Got 15-60 real fast.

MrCaffeine
10-01-2015, 05:11 PM
Just a quick question, the scipt logins just fine but after it is next to the rock's it just continues to do nothing. The debug in Simba shows nothing important and then after a few seconds the SMART screen just completely closes. What am I doing wrong?

I enabled paint and this is the message I received:

------ TRSLobby.findPlayButton(): result = False
------ TRSLobby.findPlayButton(): result = False
------ TRSLobby.findPlayButton(): result = False
---- Took too long to find login popup or login - respawning SMART
------ TRSLobby.findPlayButton(): result = False
------ Login message: session has now ended

MrCaffeine
10-03-2015, 02:05 AM
Hello. I tried to modify the scipt using reverse and forward Array for pathwalking to a different mine but I am unsure what Path 0 is since it doesn't specify in script so the character continues to walk south from my location. I wish to use it on the other side of Varrock and I have already created DTM's for the new ores but it doesn't seem to find itself so any help from creator or member would be appreciated. Thanks

oscareragon
10-08-2015, 09:06 PM
Nice work here is my proggy 26790

terrorbyte
10-14-2015, 11:38 PM
For some reason the banking system isn't working. It mines perfectly but when it goes to bank it opens the bank tab and just sits there. Does nothing. It doesn't deposit. Is anyone else getting the same problem? Any possible fix?

Roman
10-16-2015, 09:21 PM
Great script! It has been working very well for me so far. I did a 10 hour session to test it out, but forgot to save the proggy :( I will be sure to post one soon!

Thank you very much!

EDIT:

Here are a couple of proggies. The first is just a level 3 mule mining clay with a bronze pick; the profit and experience wasn't bad. I think the account got to ~level 20 mining just from the clay.

26814

This one is the same account mining with a mithril pick for almost eight hours. I didn't get the paint but I did save the text.

/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 07h 45m 51s |
| No. of breaks taken: 6 |
| No. of iron mined: 3575 pcs |
| No. of iron/hr: 460 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 7 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 894711 gp |
| Estimated Profit/hr: 115235 gp |
\==================================/


For some reason with both, the experience script did not run. This is odd since my exp counter is in the chatbox and my setup is identical to the SRL interface setup that should be used.

Anyway, thanks again for a lovely script! It works like a charm! Jagex hasn't bothered me a bit :)

ltacom1s
10-20-2015, 12:43 AM
Seems to be working well, but it looks like the dev is gone? Only problem I have that literally just started right now, is that it will not detect the little iron ore rock to the south. Strange.

Anyway, done a lot more than this, but this is the only report I have;

|==================================|
| Time Ran: 02h 27m 52s |
| No. of breaks taken: 1 |
| No. of iron mined: 1019 pcs |
| No. of iron/hr: 413 pcs |
| Total XP Gained: 34545 xp |
| Total XP/hr: 14017 xp |
| Sapphire collected: 1 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 2 pcs |
| Total Profit: 274282 gp |
| Estimated Profit/hr: 111291 gp |
\==================================/

/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 01h 37s |
| No. of breaks taken: 0 |
| No. of iron mined: 531 pcs |
| No. of iron/hr: 526 pcs |
| Total XP Gained: 16695 xp |
| Total XP/hr: 16524 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 138591 gp |
| Estimated Profit/hr: 137173 gp |
\==================================/

Thanks OP!

moring
11-25-2015, 01:38 AM
it doesn't support bank pins

flakazoid
11-25-2015, 07:31 PM
it doesn't support bank pins

Have a go at it.

http://docs.villavu.com/srl-6/pinscreen.html

moring
11-25-2015, 08:49 PM
Thank you but I've already decided to customize this script or making my own one because this script didn't work well for me.The second reason is to improve the anti ban.
it's on progress.(already made it work just left to improve).

Tenti
12-01-2015, 07:19 PM
Loving this script, using it to mine tin so i can level up, got from 15-30 pretty fast.
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 01h 35m 25s |
| No. of breaks taken: 0 |
| No. of tin mined: 500 pcs |
| No. of tin/hr: 314 pcs |
| Total XP Gained: 8750 xp |
| Total XP/hr: 5502 xp |
| Sapphire collected: 2 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 1 pcs |
| Total Profit: 44771 gp |
| Estimated Profit/hr: 28152 gp |
\==================================/

Tenti
12-01-2015, 10:54 PM
Noticed a slight problem, not sure if its just me or not but even when I change it to
comboBoxDefaults := ['Iron']; in the script like it says to, it only targets tin while mining.

Tenti
12-02-2015, 12:13 PM
Nevermind, it mines iron now, guess it just went weird.

Tenti
12-02-2015, 05:07 PM
Small update now i've started to mine iron:
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 58m 29s |
| No. of breaks taken: 0 |
| No. of iron mined: 418 pcs |
| No. of iron/hr: 429 pcs |
| Total XP Gained: 14648 xp |
| Total XP/hr: 15025 xp |
| Sapphire collected: 1 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 136686 gp |
| Estimated Profit/hr: 140200 gp |
\==================================/

GeezerToad
12-05-2015, 02:44 PM
The script works great for mining. Unfortunately, every time it banks my inventory, it just sits there and doesn't deposit the iron ore. Is there an interface setting that I have not properly enabled for this script to work, or is it a problem with the script itself. Others on this thread have had this issue as well.

EDIT:
I found the solution to the banking error. Because I am currently a non-member pleb, the subscribe button was glitching the banking system. My solution was to take the rectangle symbol of eternal poverty and move it to the VERY bottom right of the screen.

GeezerToad
12-05-2015, 03:27 PM
Move the subscribe button to the very bottom corner of the screen to prevent it from glitching the banking system.

xStratos
12-07-2015, 11:39 PM
Starts RS up, but then nothing and this...

26957

Also if this helps:
"Error: The given DTM Index[0] doesn't exist at line 329
Execution failed."

Old school Botter, just been away from scripts for awhile, so any help would be appreciated!

Citrus
12-08-2015, 12:42 AM
Starts RS up, but then nothing and this...

26957

Also if this helps:
"Error: The given DTM Index[0] doesn't exist at line 329
Execution failed."

Old school Botter, just been away from scripts for awhile, so any help would be appreciated!

Did you read the debug? It says you're missing the map

Cyanempire
12-09-2015, 06:33 AM
When i start the script it does its failsafe procedure (tele to varrock lodestone)
then nothing happens.

looking at the simba window it just spams
"walking to mining area"

Tenti
12-09-2015, 07:44 AM
I left it on for 7 hours but it got stuck on a wall in the bank and wouldn't deposit stuff.
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 04h 05m 34s |
| No. of breaks taken: 0 |
| No. of iron mined: 1787 pcs |
| No. of iron/hr: 437 pcs |
| Total XP Gained: 62545 xp |
| Total XP/hr: 15282 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 4 pcs |
| Ruby collected: 1 pcs |
| Total Profit: 618941 gp |
| Estimated Profit/hr: 151225 gp |
\==================================/

Cyanempire
12-10-2015, 03:08 PM
ERROR: sps.isInPolygon: less than 3 vertice points in TPA

Tenti
12-12-2015, 10:16 PM
Only tried it once so I'm not sure if it was just the client being weird, but the powerminer mode didn't seem to work, it just spammed running to mine location even though it was already there.

GeezerToad
12-14-2015, 03:51 AM
The script is working very well now. Thank you very much!

TealThunder
12-22-2015, 04:59 PM
Worked great, ran for almost 10hrs with no problems

|==================================|
| Time Ran: 09h 45m 41s |
| No. of breaks taken: 6 |
| No. of iron mined: 4366 pcs |
| No. of iron/hr: 447 pcs |
| Total XP Gained: 152583 xp |
| Total XP/hr: 15631 xp |
| Sapphire collected: 5 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 0 pcs |
| Total Profit: 1598835 gp |
| Estimated Profit/hr: 163790 gp |
\==================================/

Scottbah
01-07-2016, 05:20 PM
I love the script, i was getting amazing results. But now it seems when i go to the bank it does not deposit and just sits on the bank tab.

johanolausson
01-09-2016, 02:54 AM
The script gets stuck after teleporting to varrock loadstone, it keeps spamming " Walking to mining area.." Please help

Gliahu
01-09-2016, 03:14 PM
the script gets stuck at the bank, error at line 331, a closer look points that error to the inventory count part

kannibleklown
01-14-2016, 06:15 AM
Been working flawlessly for me thus far, have had it running for 3 or so hours, and not a single mess up. Thanks!

jetship
01-15-2016, 01:01 PM
Hi, I'm having issues I'm getting this error "sps.isInPolygon: less than 3 vectice points TPA" how do I fix this thanks! :)

volcon
03-26-2016, 03:54 PM
im getting an error and i dont really know what im doing. any help is appreciated

Error: Invalid floating point operation at line 331
Execution failed.
The following DTMs were not freed: [0, 1, 2, 3]
The following bitmaps were not freed: [Minimap Mask, 1, SMART Debug Image, Gametab Bitmap[0], Gametab Bitmap[1], Gametab Bitmap[2], Gametab Bitmap[3], Gametab Bitmap[4], Gametab Bitmap[5], Gametab Bitmap[6], Gametab Bitmap[7], Gametab Bitmap[8], Gametab Bitmap[9], Gametab Bitmap[10], Gametab Bitmap[11], Gametab Bitmap[12], Gametab Bitmap[13]]

line 331 is
xpPH := round((currentXp * 60) / (ScriptTimer.getTime() / 60000));



Edit:i fixed the problem. i dont have the exp tracker exactly in the same spot as in the picture

Blade par
03-28-2016, 03:00 PM
-- ERROR: sps.isInPolygon: less than 3 vertice points in TPA
Initiating failsafe..
---- TRSLodestoneScreen.teleportTo(): result = true
-- ERROR: Unable to get players postion, sps isn't setup

Cannot get the powermine function to run

MrDrax
03-30-2016, 01:56 PM
Thanks for the script. I did some reading on the forums and I've learned quite a few. And since coding is something logical, I thought I'd give it a shot to fix the power mining part. I'll post a progress report later. :)

Renzanity
03-30-2016, 05:59 PM
Hi everyone that's been using this script,

I will try working on this script again to keep it up to date. I'll need a lot of time to know what's new so bare with me guys.

Have a good one.

Renzanity
04-11-2016, 08:34 AM
EDIT: v3.0 release
-Rewritten some parts of the code to make the powermine function to work again.

Renzanity
04-11-2016, 03:31 PM
Varrock Miner v1.0 is now open for testing!
-You can now mine on either Varrock West or East mining areas
-You can now mine for Copper
-You can also mine for both Tin & Copper
P.S. Don't forget to grab the new SPS Map for this.

squarenix5
04-12-2016, 11:25 PM
Wow, this script works great! Good job buddy!

Renzanity
04-13-2016, 01:40 AM
EDIT: Varrock Miner v1.2 is now open for testing
-You can now choose how to deposit your ores (Using a preset or just plain quickdeposit)
-You can choose what preset to use when depositing ores

Here is a sample progress report for v1.2



v1.2
/============================================\
|================ Varrock Miner =============|
|============================================|
| Time Ran: 07h 13m 17s |
| No. of breaks taken: 1 |
| No. of iron mined: 3831 pcs |
| No. of iron/hr: 531 pcs |
| Total XP Gained: 130270 xp |
| Total XP/hr: 18039 xp |
| Sapphire collected: 3 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 1216502 gp |
| Estimated Profit/hr: 168457 gp |
\============================================/

http://i.imgur.com/mrTRhR1.png

plinkus
04-13-2016, 02:29 AM
Hi,

I am able to start the script and it will take me to the mine area and start mining. However once I get a full inventory it just sits there and doesn't bank. The progress/xp calculations are not filling out anything, they stay at 0 the whole time. Is there an exact screen layout that I need in order to make it run properly? Or could it be that I don't have "associate.sex" enabled because when I use that extension it gives me an error.

Thanks!

Renzanity
04-13-2016, 02:45 AM
Hi,

I am able to start the script and it will take me to the mine area and start mining. However once I get a full inventory it just sits there and doesn't bank. The progress/xp calculations are not filling out anything, they stay at 0 the whole time. Is there an exact screen layout that I need in order to make it run properly? Or could it be that I don't have "associate.sex" enabled because when I use that extension it gives me an error.

Thanks!

Hi plinkus,

What version are you using? Try to run the updater again. I'm afraid I've been changing things too frequently in the updater for a while now for I am testing things out with it.

If you've done what I have said above and you have the Varrock Miner v1.2, let me know if the same thing occurs.

For the XP calculations, you should follow step# 5 of the instructions and should have your layout as that of the standard Simba/SMART client layout.


5. Place your XP tracker on the upper right corner of your chatbox like so:
http://i.imgur.com/KBHLnFs.png


Have a good one and tell me if any of these helped you. :)

plinkus
04-13-2016, 03:13 AM
Hi plinkus,

What version are you using? Try to run the updater again. I'm afraid I've been changing things too frequently in the updater for a while now for I am testing things out with it.

If you've done what I have said above and you have the Varrock Miner v1.2, let me know if the same thing occurs.

For the XP calculations, you should follow step# 5 of the instructions and should have your layout as that of the standard Simba/SMART client layout.



Have a good one and tell me if any of these helped you. :)

Have a good one and tell me if any of these helped you. :)[/QUOTE]

Thanks for the quick response. I'm using the 3.0 Version from the bottom of your post on the 1st page. I tried to attach a picture showing what I'm seeing but I don't have enough posts to do that. I run to the mine and fill up but then just sit there and continue to try to mine. The red dot seems to hover over my ribbon a lot as well, if that tells you anything. I have my XP counter down in the chatbar as you said. I don't have anything in my action bar. Do I need to?

Renzanity
04-13-2016, 03:25 AM
Thanks for the quick response. I'm using the 3.0 Version from the bottom of your post on the 1st page. I tried to attach a picture showing what I'm seeing but I don't have enough posts to do that. I run to the mine and fill up but then just sit there and continue to try to mine. The red dot seems to hover over my ribbon a lot as well, if that tells you anything. I have my XP counter down in the chatbar as you said. I don't have anything in my action bar. Do I need to?

Hi again,

It's not running to the bank for you? Or does it go to the bank and doesn't bank?

And may I suggest that you try the Varrock Miner v1.2? It can be used to mine on the West or East mining spots in Varrock.

Have a good one. :)

squarenix5
04-13-2016, 08:36 AM
/==================================\
|========Varrock West Miner========|
|==================================|
| Time Ran: 04h 06m 35s |
| No. of breaks taken: 2 |
| No. of iron mined: 1788 pcs |
| No. of iron/hr: 435 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 4 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 568704 gp |
| Estimated Profit/hr: 138379 gp |
\==================================/

plinkus
04-13-2016, 04:02 PM
Hi again,

It's not running to the bank for you? Or does it go to the bank and doesn't bank?

And may I suggest that you try the Varrock Miner v1.2? It can be used to mine on the West or East mining spots in Varrock.

Have a good one. :)

I downloaded the V1.2 now and I just started it. Once again it took me to the East mine, just as I selected. Then it mined a full inventory but continued to try to mine, it would not go to the bank. Is it possible that I'm selecting an incorrect option before the script starts? I chose Bank>Quick Deposit but is there something else I could be doing wrong? Would it help if I had a full debug?

Simba said:
Initiating failsafe..
Walking to the mining area..

And it's been sitting there ever since trying to mine with a full inventory. I took this screenshot after I made it run away from the mine. The red dot is constantly moving over my command ribbon like it's confused. Does my screen layout look ok?

Thanks.27322

Renzanity
04-13-2016, 05:02 PM
I downloaded the V1.2 now and I just started it. Once again it took me to the East mine, just as I selected. Then it mined a full inventory but continued to try to mine, it would not go to the bank. Is it possible that I'm selecting an incorrect option before the script starts? I chose Bank>Quick Deposit but is there something else I could be doing wrong? Would it help if I had a full debug?

Simba said:
Initiating failsafe..
Walking to the mining area..

And it's been sitting there ever since trying to mine with a full inventory. I took this screenshot after I made it run away from the mine. The red dot is constantly moving over my command ribbon like it's confused. Does my screen layout look ok?

Thanks.27322

Hi again plinkus,

That sucks that it won't work for you. Try enabling the debug by checking "Display Debug" before running the script and when the bot starts to act up again stop the script before it starts spamming more of it in the debug. Copy the debug and paste it here so I can see what's happening in the script for you. :)

I hope we can fix this issue soon.

Have a good one. :)

plinkus
04-13-2016, 05:34 PM
Hi again plinkus,

That sucks that it won't work for you. Try enabling the debug by checking "Display Debug" before running the script and when the bot starts to act up again stop the script before it starts spamming more of it in the debug. Copy the debug and paste it here so I can see what's happening in the script for you. :)

I hope we can fix this issue soon.

Have a good one. :)

So here we are. I tried to run it again with debug. I started at the mine with a full inventory of iron. Here's what it says:
-- INSTALLATION STATUS: Script Paint exists.
-- setupSRL()
---- Setting up SRL...
---- attempting to spawn smart, attempt #: 1
---- initSmart():
------ Attempting to pair to a previously spawned client
------ smartPairToExistingClient():
-------- Found 1 free client(s), attempting to pair to one...
---------- smartSetAsTarget(): Succesfully set SMART[10444] as Simba's target
-------- Succesfully paired to a existing client, SMART[10444]
------ smartPairToExistingClient(): result = true
------ Succesfully initialized via pairing to a previously spawned client
---- initSmart()
------ smartSetupDrawing(): Succesfully setup SMART drawing
---- Waiting up to 5 minutes for RS to load...
---- TRSActionBar.__find(): EOC bar height = 75
------ Dynamic interfaces have been set.
---- Client is ready.
---- Setup SRL in 0 Seconds
-- setupSRL(): True
-- sps.init()
---- Path exists (C:\Simba\Includes\SPS\img\runescape_other\VM_SPS_ 00.png)
---- Setup area "VM_SPS_00" in 47ms
-- sps.init()
Loading Varrock East coordinates..
Loading info for Iron..
-- TRSGrandExchange.getPrice(440): 305
-- TRSGrandExchange.getPrice(1623): 922
-- TRSGrandExchange.getPrice(1621): 1577
-- TRSGrandExchange.getPrice(1619): 2746
-- TRSGrandExchange.getPrice(1617): 3713
Successfully logged you in..
---- minimap.mouseOffCompass(): Succesfully moved mouse off of compass
---- TRSMinimap.clickCompass(): Clicked compass
---- TRSGameTab.__initTabs(): Setup gametab properties
-- HINT: findTicket(): Backpack is not open, consider calling tabBackpack.open() first
-- HINT: destroyTicket(): Backpack is not open, consider calling tabBackpack.open() first
-- TRSGameTabs.openTab(2)
---- Opening tab via gametab navigation bar
-- TRSGameTabs.openTab(2): result = False
-- TRSGameTabs.openTab(2)
---- Opening tab via gametab navigation bar

I paused it after this. It continually spits out this:
---- Opening tab via gametab navigation bar
-- TRSGameTabs.openTab(2): result = False
-- TRSGameTabs.openTab(2)
---- Opening tab via gametab navigation bar

I hope this helps.

me_ntal
04-15-2016, 09:47 AM
So here we are. I tried to run it again with debug. I started at the mine with a full inventory of iron. Here's what it says:
-- INSTALLATION STATUS: Script Paint exists.
-- setupSRL()
---- Setting up SRL...
---- attempting to spawn smart, attempt #: 1
---- initSmart():
------ Attempting to pair to a previously spawned client
------ smartPairToExistingClient():
-------- Found 1 free client(s), attempting to pair to one...
---------- smartSetAsTarget(): Succesfully set SMART[10444] as Simba's target
-------- Succesfully paired to a existing client, SMART[10444]
------ smartPairToExistingClient(): result = true
------ Succesfully initialized via pairing to a previously spawned client
---- initSmart()
------ smartSetupDrawing(): Succesfully setup SMART drawing
---- Waiting up to 5 minutes for RS to load...
---- TRSActionBar.__find(): EOC bar height = 75
------ Dynamic interfaces have been set.
---- Client is ready.
---- Setup SRL in 0 Seconds
-- setupSRL(): True
-- sps.init()
---- Path exists (C:\Simba\Includes\SPS\img\runescape_other\VM_SPS_ 00.png)
---- Setup area "VM_SPS_00" in 47ms
-- sps.init()
Loading Varrock East coordinates..
Loading info for Iron..
-- TRSGrandExchange.getPrice(440): 305
-- TRSGrandExchange.getPrice(1623): 922
-- TRSGrandExchange.getPrice(1621): 1577
-- TRSGrandExchange.getPrice(1619): 2746
-- TRSGrandExchange.getPrice(1617): 3713
Successfully logged you in..
---- minimap.mouseOffCompass(): Succesfully moved mouse off of compass
---- TRSMinimap.clickCompass(): Clicked compass
---- TRSGameTab.__initTabs(): Setup gametab properties
-- HINT: findTicket(): Backpack is not open, consider calling tabBackpack.open() first
-- HINT: destroyTicket(): Backpack is not open, consider calling tabBackpack.open() first
-- TRSGameTabs.openTab(2)
---- Opening tab via gametab navigation bar
-- TRSGameTabs.openTab(2): result = False
-- TRSGameTabs.openTab(2)
---- Opening tab via gametab navigation bar

I paused it after this. It continually spits out this:
---- Opening tab via gametab navigation bar
-- TRSGameTabs.openTab(2): result = False
-- TRSGameTabs.openTab(2)
---- Opening tab via gametab navigation bar

I hope this helps.

Take a screenshot of how you have it setup when your logged in

me_ntal
04-15-2016, 11:38 AM
Couple of mods, I have done to the script to improve its reliability

Shorten the bank area window, to avoid trying to use the banker standing behind the South West Door

///////
area[1] := [Point(193, 62), Point(192, 105), Point(262, 105), Point(263, 64), Point(193, 62)]; //Area of the bank
//////

Changed the area of the mine, due to some rare occasions falling short of the mine and trying to source colors while in the forest.

/////
area[2] := [Point(200, 348), Point(172, 346), Point(156, 396), Point(200, 402), Point(244, 350)]; //Area of the mine
/////

I have done some other modifications and managed to get the script up to 12 trips an hour consistently

Its a good script!

Renzanity
04-16-2016, 10:49 AM
Varrock Miner v1.3 is now open for testing
-Added an auto updater on the script itself
-Edited the toMine(); procedure
-When mining for Tin and Copper, it randomly mines the stones instead of mining them 14x14
-Edited the Areas for polygons
-Fixed the progress report procedure
-Uploaded a new Varrock Miner Updater file (download it again if you have downloaded the old ones)

New bug:
-Suddenly doesn't recognize gem DTM, hence power mining for a long time will not be advisable

Renzanity
04-17-2016, 04:23 PM
Varrock Miner v1.4 release
-Revised the Updater again (please download the new one)
-Added a changelog text file in the updater (check the changes there if you wish)

EDIT: If I may ask a moderator to change this thread's title to [RS3] Varrock Miner - Renzanity I would be grateful.

plinkus
04-18-2016, 01:36 PM
Take a screenshot of how you have it setup when your logged in

It's no big deal. I just wanted to test this script and see if I could run one. I have been too busy to get on for the past few days. Maybe if I have a chance this week I'll post a pic. Thanks for the help.

EthosOP
04-24-2016, 06:16 AM
For some reason the bot just keeps clicking the backpack button. Have I done something wrong?

Renzanity
04-24-2016, 06:53 AM
For some reason the bot just keeps clicking the backpack button. Have I done something wrong?

Hi EthosOP,

When does this happen? Can you provide some more details about it? (A screenshot / the debug from when the bug starts happening)

And while you're at it, try running deleting the current script and then run the updater again.

Also, try this:

http://i.imgur.com/YdWdCgg.png

To turn it into this
http://i.imgur.com/6xt9egJ.png


Have a good one. :)

EthosOP
04-24-2016, 07:59 AM
I tried it, the debug came up with.

walking to mining area
you are near the mine or bank

I tried clicking the button but at this point it is just moving up and down. It will not mine. I was at the tin and copper mine, it had no problem walking there but would not mine. I will try deleting and redoing the script in a sec

EthosOP
04-24-2016, 08:06 AM
I ran it again and checked closer this error came up


Checking for Renzanity's Varrock Miner files..
Everything's up to date!
Loading Varrock West coordinates..
Loading info for Tin..
Successfully logged you in..
Warning! You passed a wrong xs to a finder function: -220. That is below 0, thus out of bounds. Setting the value to 0 for now.

Renzanity
04-24-2016, 08:20 AM
I ran it again and checked closer this error came up


Checking for Renzanity's Varrock Miner files..
Everything's up to date!
Loading Varrock West coordinates..
Loading info for Tin..
Successfully logged you in..
Warning! You passed a wrong xs to a finder function: -220. That is below 0, thus out of bounds. Setting the value to 0 for now.

Hello again,

I suggest you enable the debug by clicking it on the playerform before the script starts so that I can see what happens in your end.

rkroxpunk
05-01-2016, 02:01 AM
Hi Renzanity, I've been running this script and keeping a close eye on it. Currently running it at Varrock West mining iron, it's really only able to go for about 30 minutes before it gets lost.
It seems to find its way to the room north of the mine site, mid mining. It seems there a few colours in that room that maybe match iron ore?
If you're still planning on working on this script my advice would be work on the failsafes, it seems to click on ores without a regard for what the hover text is. I haven't actually checked the code yet but for instance when it does end up in that room, it starts clicking on things like it's mining ore despite there not actually being hover text that says 'ore'.
Second thing would be if the bot is lost then it should use the lodestone failsafe you have setup. Maybe setup a timer if the current mining run has taken x amount of time then it assumes it's lost and goes back to the lodestone.
Anyway just a bit of feedback, thanks for the script though I really appreciate the work you put into it!

Renzanity
05-01-2016, 03:17 AM
Hi Renzanity, I've been running this script and keeping a close eye on it. Currently running it at Varrock West mining iron, it's really only able to go for about 30 minutes before it gets lost.
It seems to find its way to the room north of the mine site, mid mining. It seems there a few colours in that room that maybe match iron ore?
If you're still planning on working on this script my advice would be work on the failsafes, it seems to click on ores without a regard for what the hover text is. I haven't actually checked the code yet but for instance when it does end up in that room, it starts clicking on things like it's mining ore despite there not actually being hover text that says 'ore'.
Second thing would be if the bot is lost then it should use the lodestone failsafe you have setup. Maybe setup a timer if the current mining run has taken x amount of time then it assumes it's lost and goes back to the lodestone.
Anyway just a bit of feedback, thanks for the script though I really appreciate the work you put into it!

Hello rkroxpunk,

Thank you for letting me know that this thing happens when running this script. I haven't encountered this event but it's likely to happen since my SPS paths are annoyingly bad and I focused too much on the Varrock East mining area while re-writing this script.

Have a good one. :D

EDIT:
I'll be fixing this now since I'm done re-writing another public script I got.

rkroxpunk
05-01-2016, 07:54 AM
Hello rkroxpunk,

Thank you for letting me know that this thing happens when running this script. I haven't encountered this event but it's likely to happen since my SPS paths are annoyingly bad and I focused too much on the Varrock East mining area while re-writing this script.

Have a good one. :D

EDIT:
I'll be fixing this now since I'm done re-writing another public script I got.

Yeah that's fair enough, I have to say I literally didn't have a single issue when using this on tin + copper at Varrock East with banking but obviously reached 15 mining very quickly and moved over to iron which is only at the West location.

Renzanity
05-01-2016, 08:38 AM
Yeah that's fair enough, I have to say I literally didn't have a single issue when using this on tin + copper at Varrock East with banking but obviously reached 15 mining very quickly and moved over to iron which is only at the West location.

Hello again,

Well, that's good news :D. And by "iron is only at the West location", I think there are Iron rocks in the East location(4 rocks to be precise) but it's always filled with other bots anyhow so I guess you're a bit right about saying there are no Iron rocks in the east location :P.

Anyway, I'm testing out the West location now and this is what I got so far:


1.61
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 05h 03m 31s |
| No. of breaks taken: 3 |
| No. of iron mined: 2,234 pcs |
| No. of iron/hr: 442 pcs |
| Total XP Gained: 78,225 xp |
| Total XP/hr: 15,463 xp |
| Sapphire collected: 4 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 699,676 gp |
| Estimated Profit/hr: 138,306 gp |
\=======================================/



Have a good one. :)

rkroxpunk
05-01-2016, 09:14 AM
Hello again,

Well, that's good news :D. And by "iron is only at the West location", I think there are Iron rocks in the East location(4 rocks to be precise) but it's always filled with other bots anyhow so I guess you're a bit right about saying there are no Iron rocks in the east location :P.

Anyway, I'm testing out the West location now and this is what I got so far:


1.62
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 02h 49m 18s |
| No. of breaks taken: 1 |
| No. of iron mined: 1,235 pcs |
| No. of iron/hr: 438 pcs |
| Total XP Gained: 43,260 xp |
| Total XP/hr: 15,331 xp |
| Sapphire collected: 4 pcs |
| Emerald collected: 2 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 389,986 gp |
| Estimated Profit/hr: 138,204 gp |
\=======================================/



Have a good one. :)

Whoops, legit thought there weren't any at Varrock East. Is that proggy with the latest available version? I have definitely not been able to get it to last any longer than about 30 minutes before it gets stuck in that north room.

Renzanity
05-01-2016, 09:18 AM
Whoops, legit thought there weren't any at Varrock East. Is that proggy with the latest available version? I have definitely not been able to get it to last any longer than about 30 minutes before it gets stuck in that north room.

I forgot to ask, what version are you running? It's actually on version 1.62 now. I've been updating the Pastebin so it automatically downloads the new version for you.

rkroxpunk
05-01-2016, 11:15 AM
I forgot to ask, what version are you running? It's actually on version 1.62 now. I've been updating the Pastebin so it automatically downloads the new version for you.

Ah, I was on 1.5 just ran the updater again and now 1.62 is there. Shall give it a try, thanks!

EDIT: Newest version runs pretty much flawlessly. SCAR crashed because I was stuffing around with things, but managed to grab a screenshot of the proggy
27431

EDIT 2:
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 04h 36m 00s |
| No. of breaks taken: 1 |
| No. of iron mined: 1,741 pcs |
| No. of iron/hr: 378 pcs |
| Total XP Gained: 58,615 xp |
| Total XP/hr: 12,742 xp |
| Sapphire collected: 4 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 1 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 547,183 gp |
| Estimated Profit/hr: 118,950 gp |
\=======================================/

Renzanity
05-02-2016, 01:36 AM
Ah, I was on 1.5 just ran the updater again and now 1.62 is there. Shall give it a try, thanks!

EDIT: Newest version runs pretty much flawlessly. SCAR crashed because I was stuffing around with things, but managed to grab a screenshot of the proggy
27431

EDIT 2:
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 04h 36m 00s |
| No. of breaks taken: 1 |
| No. of iron mined: 1,741 pcs |
| No. of iron/hr: 378 pcs |
| Total XP Gained: 58,615 xp |
| Total XP/hr: 12,742 xp |
| Sapphire collected: 4 pcs |
| Emerald collected: 1 pcs |
| Ruby collected: 1 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 547,183 gp |
| Estimated Profit/hr: 118,950 gp |
\=======================================/

Hello again,

I added your progress report in the list. :) If there's anything more you wish to report, just let me know.

Happy mining. :)

Cat92
05-10-2016, 07:50 AM
1.63
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 16s |
| No. of breaks taken: 0 |
| No. of iron mined: 0 pcs |
| No. of iron/hr: 0 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 0 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 0 gp |
| Estimated Profit/hr: 0 gp |
\=======================================/

Doesn't work
Wanted West but just clicking eastward and then just stoppped

Renzanity
05-10-2016, 11:32 AM
Varrock Miner v1.64 release
-You can now specify what Quick Key to use to drop your ore
-Changed the SPS map for it was too small
-Changed the findObj function to be able to click on offsets and not just the middle of the ATPA
-Some minor fixes on some procedures

Renzanity
05-13-2016, 03:40 PM
Varrock Miner v1.7 release
-Rewrote the script to shorten some parts of it

Garden of Sinners
05-15-2016, 07:12 AM
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 03h 39m 17s |
| No. of breaks taken: 2 |
| No. of iron mined: 2,124 pcs |
| No. of iron/hr: 581 pcs |
| Total XP Gained: 84,099 xp |
| Total XP/hr: 23,010 xp |
\=======================================/

Renzanity
05-15-2016, 08:37 AM
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 03h 39m 17s |
| No. of breaks taken: 2 |
| No. of iron mined: 2,124 pcs |
| No. of iron/hr: 581 pcs |
| Total XP Gained: 84,099 xp |
| Total XP/hr: 23,010 xp |
\=======================================/

Hi Garden of Sinners,

Mind if I ask what version are you using? Did the ore and gem dropping mess up at some point?

Have a good one.

EDIT: I also added your progress report in the OP, thank you for posting.

klamor
05-15-2016, 05:01 PM
getting an access violation error when attempting to run the 1.71 version of the script


Program exception!
Stacktrace:

Exception class: lpException
Message: Runtime error: "Access violation"
$0076365A
Simba Version: 1100

Garden of Sinners
05-15-2016, 05:04 PM
Hi Garden of Sinners,

Mind if I ask what version are you using? Did the ore and gem dropping mess up at some point?

Have a good one.

EDIT: I also added your progress report in the OP, thank you for posting.

I am/was using the Varrock Miner v1.7 release and no the ore and gem dropping worked almost perfectly. However what I did notice when I woke up is that I had a couple of seeds in my inventory from who knows where. I'll probably babysit this script a little bit more tonight, and thanks for the script by the way.

Renzanity
05-15-2016, 06:44 PM
getting an access violation error when attempting to run the 1.71 version of the script

Hello klamor,

I don't know what to say about that, perhaps try deleting the v1.71 script and then try to run the updater again? If that doesn't resolve it, try asking other members about it.


I am/was using the Varrock Miner v1.7 release and no the ore and gem dropping worked almost perfectly. However what I did notice when I woke up is that I had a couple of seeds in my inventory from who knows where. I'll probably babysit this script a little bit more tonight, and thanks for the script by the way.

Hello Garden of Sinners,

I'm glad it works for you. That seed must have been picked up when the bot missed clicking a rock...if not, I'm not sure.

You two have a good one.

klamor
05-15-2016, 08:22 PM
turns out I had two versions of the script in the folder. deleted both and ran the updater script and everything is fine now.

Garden of Sinners
05-16-2016, 05:56 AM
1.71
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 08h 40m 55s |
| No. of breaks taken: 0 |
| No. of iron mined: 4,643 pcs |
| No. of iron/hr: 535 pcs |
| Total XP Gained: 162,638 xp |
| Total XP/hr: 18,732 xp |
\=======================================/

1.71
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 10h 03m 06s |
| No. of breaks taken: 0 |
| No. of iron mined: 5,396 pcs |
| No. of iron/hr: 537 pcs |
| Total XP Gained: 197,202 xp |
| Total XP/hr: 19,619 xp |
\=======================================/
Successfully executed.

klamor
05-20-2016, 02:26 PM
hey renz could you post your exact graphics setup? im having issues where no matter which mining site i set, it always walks south of the site and sits there looking for the mine

Renzanity
05-20-2016, 05:34 PM
hey renz could you post your exact graphics setup? im having issues where no matter which mining site i set, it always walks south of the site and sits there looking for the mine

Hello klamor,

The graphics setup is just the standard RS3 graphics setup.

http://i.imgur.com/UUEdv55.png
http://i.imgur.com/ayTnyO9.png
http://i.imgur.com/6AaqTL4.png
http://i.imgur.com/6d4p9HW.png


Have a good one.

klamor
05-21-2016, 08:18 AM
hmm, i've been using max brightness. let's see if I can get you a decent proggy now

EDIT:srsly can't figure out what's wrong with my setup. it keeps teleporting to the varrock lodestone and can't seem to navigate to either mine or bank

Renzanity
05-21-2016, 08:53 AM
hmm, i've been using max brightness. let's see if I can get you a decent proggy now

EDIT:srsly can't figure out what's wrong with my setup. it keeps teleporting to the varrock lodestone and can't seem to navigate to either mine or bank

Hello again,

Try going to the SPS include and check out the runescape_other folder and delete the VM_SPS_01 file and run the script again. Your SPS map is probably outdated.


http://i.imgur.com/woDmdEK.png

klamor
05-22-2016, 07:22 AM
seems to be working now, will update with proggy in a few hours if everything goes well

EDIT: mined about 600 ores before my client became too laggy and it couldn't find the bankers

Renzanity
05-22-2016, 08:20 AM
seems to be working now, will update with proggy in a few hours if everything goes well

Hello klamor,

I'm glad to know that it's working now. Let me know if there are other bugs so I can look into it.

Have a good one. :)

naruteitor
05-26-2016, 05:01 PM
mine does not login :C and i have the exact same config
Fixed renamber SPS_00.png to SPS_01.png

Renzanity
05-29-2016, 04:42 PM
Varrock Miner v1.72 release
-Changed the mining procedure to detecting if your player is still animating
-Added an auto client reload for when the script's been running for approximately 8hrs already
-Added a function to close the popup when you reach lv10 (From The Mayor's VEB Miner)

akren
06-08-2016, 05:41 PM
Not sure if I set something up wrong, But the script just opens and closes my skills/inventory tab and nothing else, do I need to lock them open?

edtor
06-18-2016, 09:20 AM
Nice job, will post proggry when i wake up in some hrs :)

aradalien
07-04-2016, 09:36 AM
Thanks Renz bot works really nice.

Iwanttolearn
07-26-2016, 01:41 AM
Just got banned using this script. 3 days, only used this script.

Chainblade
08-24-2016, 05:28 PM
How do I use this script?
I click on player management and an another script starts...? Help please...

ChrisKomp
08-27-2016, 11:16 PM
I'm having the same problem as Akren. It just sits there and keeps opening and closing my inventory. My setup is correct as far as I can tell, and I can't figure out how to fix it.

kritis
08-29-2016, 06:55 AM
Have you set the correct settings in runescape for Simba ?
https://villavu.com/forum/showthread.php?t=47714

acow
08-29-2016, 01:09 PM
Have you set the correct settings in runescape for Simba ?
https://villavu.com/forum/showthread.php?t=47714

You should probably quote/@mention whoever you're talking to.
Don't be a Joopi;

Pony
09-04-2016, 05:05 PM
The script banks one time then shuts down, without showing errors, what can I do to fix this?
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 06m 36s |
| No. of breaks taken: 0 |
| No. of tin & copper mined: 27 pcs |
| No. of tin & copper/hr: 245 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
---- TRSTabBackpack.countDTM(): Found no DTM matches
---- TRSTabBackpack.countDTM(): Found no DTM matches
---- TRSTabBackpack.countDTM(): Found no DTM matches
---- TRSTabBackpack.countDTM(): Found no DTM matches
| Sapphire collected: 0 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 0 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 2,646 gp |
| Estimated Profit/hr: 24,048 gp |
| Next Break: 01h 26m 03s |
\=======================================/
-- sps.getPlayerPos(): result = {X = 238, Y = 494}, took 719 ms
-- sps.isInPolygon: result = True
You're near the bank or the mine..
Walking to the bank..
-- sps.getPlayerPos(): result = {X = 238, Y = 490}, took 719 ms
-- sps.getPlayerPos(): result = {X = 218, Y = 454}, took 703 ms
-- sps.getPlayerPos(): result = {X = 198, Y = 386}, took 734 ms
-- sps.getPlayerPos(): result = {X = 190, Y = 318}, took 765 ms
-- sps.getPlayerPos(): result = {X = 190, Y = 306}, took 765 ms
-- sps.getPlayerPos(): result = {X = 198, Y = 290}, took 781 ms
---- Waiting while the player is moving...
-- sps.walkPath(): result = True
-- sps.getPlayerPos(): result = {X = 250, Y = 246}, took 766 ms
-- sps.isInPolygon: result = True
-- isMouseOverText()
---- Current mouse-over text: "Bank Banker"
---- Found "ank" in mouse-over string: "Bank Banker"
-- isMouseOverText(): True
-- Succesfully freed SMART[2508]
-- Freeing gametabs bitmaps...
Successfully executed.

poobear12
09-26-2016, 07:14 PM
Sadly cant get the changing settings part to work.

player form does nothing and changing defaults in scripts nothing either.

Version seems to be stuck on 1.72. Can you add a github link to the latest version pelase? :redface:

norice4u
10-24-2016, 02:23 PM
using 1.72 just loads and doesn't do anything

Checking for Renzanity's Varrock Miner files..
Everything's up to date!
Loaded Varrock West coordinates..
Loaded the info for tin & copper..
and thats about it

nickenab
01-09-2017, 07:54 AM
Hey Renzanity,

Recently got back into RS. So- wanted to get back into scripts again =)
Thanks for all your work! I'm learning to read some scripts and understand them a bit.

Thought I had the proper settings (following the main set up sticky) but had done something wrong. I went into a loop of failsafing, getting stuck, and failsafing. Thank's for your post sharing you graphic set up pages. Looks like it's running smoothly for me here, and I'll edit in a proggy in the morning.

Thanks again!


1.72
/=======================================\
|========== Varrock East Miner =========|
|=======================================|
| Time Ran: 07h 18m 56s |
| No. of breaks taken: 5 |
| No. of iron mined: 2,458 pcs |
| No. of iron/hr: 336 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 5 pcs |
| Emerald collected: 0 pcs |
| Ruby collected: 1 pcs |
| Diamond collected: 0 pcs |
| Total Profit: 780,601 gp |
| Estimated Profit/hr: 106,702 gp |
| Next Break: 01h 31m 14s |
\=======================================/

Ploops
02-03-2017, 09:14 AM
Just got banned for using this script, used it for about 24 hours in the last 3 days. Just wanted to let you know that if you use it as much as I did, you should maybe tone it down a little.

WilletWarrior
02-20-2017, 06:07 AM
Hey so I've run into a bug where the script will just sit at the mines and continuously hover the cursor over the ore rocks and never actually click one, it'll just go back and forth infinitely and never make progress, which confuses me because earlier today the script was working fine. I've tried redownloading the updater and the script multiple times to no avail. Any help?

jdb100
02-24-2017, 12:44 AM
I was having the same problems but it appears that the font change they made on certain characters causes the mouse over text to read Iron as ]ron so all i had to do to fix was to change Iron to ]ron in the loadResources procedure.

chandra93
04-15-2017, 07:27 PM
]ron': ore[0].init('iron', [2042713, 8, [2, [0.13, 1.17, 0.00]]], ['ine ]ron'], 440, 'mggAAAHicY2NgYNjIxMAwD4jXAPFOIN4LxFuA+AgjA8NxIL4A xCeAeB8QbwViO1VpoC4mDCzCgB0w4sAQAAC/EAl2');
I went in and changed this like you said, but it did not fix my issue.

Pythius
04-20-2017, 01:38 AM
Have been running smoothly for me and it's still going. I'm running it with a new account. Thanks, Renzanity.



1.72
/=======================================\
|========== Varrock West Miner =========|
|=======================================|
| Time Ran: 26h 07m 13s |
| No. of breaks taken: 10 |
| No. of clay mined: 15,921 pcs |
| No. of clay/hr: 610 pcs |
| Total XP Gained: 0 xp |
| Total XP/hr: 0 xp |
| Sapphire collected: 19 pcs |
| Emerald collected: 14 pcs |
| Ruby collected: 5 pcs |
| Diamond collected: 1 pcs |
| Total Profit: 4,678,980 gp |
| Estimated Profit/hr: 179,131 gp |
| Next Break: 02h 35m 21s |
\=======================================/

TealThunder
05-03-2017, 03:54 PM
Script makes it to the mine just fine then just mouses over each of the mining spots but never clicks on any, was working well last time I tried it a few months ago

mrpickle
05-13-2017, 03:33 AM
Script makes it to the mine just fine then just mouses over each of the mining spots but never clicks on any, was working well last time I tried it a few months ago
Change line 205 from:
'Iron': ore[0].init('iron', [2042713, 8, [2, [0.13, 1.17, 0.00]]], ['ine Iron'], 440, 'mggAAAHicY2NgYNjIxMAwD4jXAPFOIN4LxFuA+AgjA8NxIL4A xCeAeB8QbwViO1VpoC4mDCzCgB0w4sAQAAC/EAl2');

to:
'Iron': ore[0].init('iron', [2042713, 8, [2, [0.13, 1.17, 0.00]]], ['ine ]ron'], 440, 'mggAAAHicY2NgYNjIxMAwD4jXAPFOIN4LxFuA+AgjA8NxIL4A xCeAeB8QbwViO1VpoC4mDCzCgB0w4sAQAAC/EAl2');

It worked after editing that. :)

gl!

mrpickle
05-13-2017, 01:29 PM
Also, warning, I tested two accounts with this for ~5ish h.
both banned 12h later.

I think this one is being picked up by the Auto detection system.

tom99
08-03-2017, 08:45 AM
Hello i get this error.

Checking for Renzanity's Varrock Miner files..
Everything's up to date!
Error while reading stream: Wrong image format at line 105
Execution failed.
The following bitmaps were not freed: [Minimap Mask]


what am i suppose to do?
I just installed simba and setup rafiki and Extensions. Its suppose to work according to instructions.

GooseG
01-20-2018, 02:15 AM
The script fails to detect when the inventory is full and keeps clicking rocks. Haven't found a way around this yet.

nutta124
07-28-2018, 05:59 PM
whats the ''anti-ban percentage'' in the setting? i dont get it.

Lama
08-04-2018, 11:49 PM
whats the ''anti-ban percentage'' in the setting? i dont get it.

Appears to be a modifier for how often you'd like to run antiban - the setting is a value between 1-100(%), meaning the higher it is, the more often the antiban will run when it's called.