View Full Version : [SRL 4] QuickPowerMiner
codenman
03-16-2008, 01:56 PM
whats an SRL Stats Password can someone tell me and whats a a srl stats username if u can tell me plz pm me it would help alot :)
n3ss3s
03-16-2008, 01:59 PM
You can get an SRL Stats account here (http://www.stats.srl-forums.com/?action=register).
Preston8
03-16-2008, 03:29 PM
Off these progress report it seems AWSOME:spot:
mohsin12331
03-16-2008, 04:33 PM
hi there timoth.
not being a leecher or anything but there is something wrong with ur script..overall it's awesome but a lil prob. so here i go. i fill in the forms..done..it logs in..done..and it mines a full inventory..doe and then drops it. but after droppping it goes into stats and tries to drop them too and then it just stops...ne help?
screwujagex
03-17-2008, 01:57 AM
hi, im new to this scar and srl stuff, so ive been looking around for some scirpts to try and learn from.
Whenever i hit run, it logs me in, waits a few seconds, then logs me out. i dont get any errors. whats wrong?
thanks
IluvSCAR
03-17-2008, 01:59 AM
hey, whats the difference if you use 'Signed Applet' or 'Unsigned' ?
IluvSCAR
03-17-2008, 02:23 AM
Im getting a Runtime Error : Out Of Range in line 46 of script ......blah blah blah
Ive spent 15 minutes searching the site for reasons but can't find anything that fits my error. Anyone care to help me out?
IluvSCAR
03-17-2008, 03:04 AM
I got it to start, but it just went to stats and started right clicking and goin down the list....hmm
Benson
03-17-2008, 03:11 AM
iluvscar im in the same boat , finding good scripts to elarn by...howe did you fix the runtime?
IluvSCAR
03-17-2008, 03:22 AM
i fixed the runtime by changing this :
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
To this:
HowManyPlayers := 6;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
But now it doesnt click on any rocks...It just goes to the stats interface, and acts like its trying to drop entire inventory. I tried changing this part around a little bit:
Players[0].Booleans[1]:= True; // True if new rocks. False if old.
Players[0].Booleans[2]:= False; // Pick equipped?
such as changing the 'true' and 'false' areas but it said some stuff about not finding pick color.... So I dont know.
coo too
03-17-2008, 06:20 PM
hey, whats the difference if you use 'Signed Applet' or 'Unsigned' ?
Im getting a Runtime Error : Out Of Range in line 46 of script ......blah blah blah
Ive spent 15 minutes searching the site for reasons but can't find anything that fits my error. Anyone care to help me out?
I got it to start, but it just went to stats and started right clicking and goin down the list....hmm
i fixed the runtime by changing this :
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
To this:
HowManyPlayers := 6;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
But now it doesnt click on any rocks...It just goes to the stats interface, and acts like its trying to drop entire inventory. I tried changing this part around a little bit:
Players[0].Booleans[1]:= True; // True if new rocks. False if old.
Players[0].Booleans[2]:= False; // Pick equipped?
such as changing the 'true' and 'false' areas but it said some stuff about not finding pick color.... So I dont know.
Remember the http://www.srl-forums.com/forum/images/satellite/buttons/edit.gif button is your friend. Do not double or triple post. People will be more likely to help you if you don't keep on nagging people and making so many posts in a row. And in answer to your question about unsigned and signed, a signed client creates a random.dat file and a jagex_cache_32 (I think) but a unsigned client won't.
IluvSCAR
03-17-2008, 11:51 PM
Ahh I see,
and thanks for the tip mate!
kollmann
03-17-2008, 11:59 PM
It still signs on.
Waits.
Then signs off.
Is it something to do with the script? Or am I still doing something wrong with setting it up?
The error says:
Getting NEW pickcolors, failed
Getting NEW pickcolors, failed
Getting NEW pickcolors, failed
Getting NEW pickcolors, failed
Getting NEW pickcolors, failed
Couldnt get pickcolors
Couldnt get pickcolors, Equip or have in inventory.
aaron4371
03-18-2008, 06:18 AM
hmmm it seems to only mine one ore then stop working my guy will just sit there
kollmann
03-18-2008, 09:11 PM
Yes!! I got it to work finally! I'm so happy since this is the first script that I got to work!
I don't know how to post a proggie so if someone could tell me?
But something happens everytime where it will log off. The longest I have gotten it to run is 55 minutes.
Benson
03-19-2008, 12:04 AM
i have also just gotten it to work :D my first script that worked. i have a short proggie..not logn casue my armies not ready yet. im hoping to elarn from this script :D
----------------------------------------
Time Running: 7 Minutes and 54 Seconds
Ores Mined: 54
Loads: 2
Ores/hr: 409
Responded: 0 Times
Broken Picks: 0
Gasses found: 19
~~~~~~~~~~~~~~~~~~~~~~~~~
kolleman (if tahts how you spell it :P) the proggie will apear after every load in the debug box (box at the bottom of the scar window) it'll tell ya how many loads how many ores/hour and sutff like that jsut highlight it and crt+c and crt+v it into the forums.
aaron4371
03-19-2008, 06:53 AM
this is a great power miner altho my pc will lag when my char moves causeing some minor issues over all great power miner
Kreks
03-19-2008, 07:48 AM
Do you drag this crosshair to your Runescape window?
penguII
03-19-2008, 10:08 AM
I works pretty good. But 2 Problems here:
It Clicks my Statistics and tries to drop everything there.
2. After a while i get the error: [Runtime Error] : Exception: Canvas does not allow drawing in line 126 in script C:\Program Files\SCAR 3.14\includes\SRL\SRL\Skill\Mining.scar.
----------------------------------------
Time Running: 24 Minutes and 4 Seconds
Ores Mined: 135
Loads: 5
Ores/hr: 336
Responded: 0 Times
Broken Picks: 0
Gasses found: 9
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kingmonkeyd
03-20-2008, 07:12 AM
Well, this is the first time I'm posting here. Although I became a member some time ago, this is the first time I've actually gotten everything to work smoothly. Anyway, thanks for the great script.
----------------------------------------
Time Running: 42 Minutes and 56 Seconds
Ores Mined: 448
Loads: 16
Ores/hr: 626
Responded: 0 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lilboy543
03-21-2008, 12:31 AM
I get the outofrange error line 46 when i run it. line 46 is the begining of the player[1] declare line.
Anyway to solve this?
mlcrkl
03-22-2008, 03:32 AM
OMG timothegreat wats up remember me on xbox? lol presidental clan
Preston8
03-22-2008, 05:14 AM
do you guys think i should try it? i need a reccomendation;)
Preston8
03-22-2008, 05:31 AM
Seems really good from proggies
Flamez
03-23-2008, 03:57 AM
Works for me, got me from 58-60
Timothegreat
03-23-2008, 08:00 AM
OMG timothegreat wats up remember me on xbox? lol presidental clan
i remember you from xbox live. :)
supadude
03-23-2008, 10:20 AM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 1.9 by Timothegreat
----------------------------------------
Time Running: 26 Minutes and 15 Seconds
Ores Mined: 189
Loads: 7
Ores/hr: 432
Responded: 0 Times
Broken Picks: 0
Gasses found: 29
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Picked 5 Colors
You have a Addy pick axe
NoPick!
***** Lost PickHead *****
Works great had a good run ended up with a broken mith pick and my addy sitting in invent with 30 mining :(
sphinx
03-23-2008, 10:24 AM
I would like to test this script but wgen i try to compile it, it says
Line 95: [Error] (13149:1): Identifier expected in script E:\*******\Scripts\[SRL4] QuickPowerMiner2.0public.scar
and line 95 is: const indentifier...
Someone who has had the same problem but got it work please pm me!
SWAT321
03-23-2008, 01:04 PM
Ty for the script. It's the first one I've tried.
supadude
03-24-2008, 01:22 AM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 1.9 by Timothegreat
----------------------------------------
Time Running: 34 Minutes and 10 Seconds
Ores Mined: 297
Loads: 11
Ores/hr: 521
Responded: 0 Times
Broken Picks: 0
Gasses found: 19
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Picked 5 Colors
You have a Mith pick axe
Successfully executed
Works great no problems whatsoever got my 40 mining for karamja achievement diary now going to get my fury with hy's tokkul :D
the falz
03-24-2008, 01:10 PM
looks great
havent tried scar in years and its starting to get updates again which is excellent, we have finally someone working to help you srl developers.
hmm, better go and try this out :D
n3ss3s
03-25-2008, 01:28 PM
looks great
havent tried scar in years and its starting to get updates again which is excellent, we have finally someone working to help you srl developers.
hmm, better go and try this out :D
SRL Developers' job is to develop SRL, most of them rarely make scripts.
issamawan
03-25-2008, 01:40 PM
hey yo im CONTINUOUSLY gettin this message:
Failed when compiling
Line 432: [Hint] (10379:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12257:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
its happening with all scripts....and yes guys im an uber noob
justsh00t
03-25-2008, 08:42 PM
It acutally worked one pack , when it needs to drop it go's to my skills list and clicks right mouse and cancel..
And when a Golem appeared it didn't run away.
I hope you can help me ,
Justsh00t
simo14
03-26-2008, 05:25 PM
It won't work for me >_< but thanks anyway?
Many people have reported thsi already but i will report it yet again:
Line 432: [Hint] (10376:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.14\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
btw, i tried it with SCAR 3.15 as well and no go either. Just providing feedback and hope to see it working soon.
issamawan
03-27-2008, 08:53 AM
hey yo im CONTINUOUSLY gettin this message:
Failed when compiling
Line 432: [Hint] (10379:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12257:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
its happening with all scripts....and yes guys im an uber noob
cmon someone plzzz help...
jelmer gf
03-27-2008, 05:05 PM
nice job!
issamawan
03-27-2008, 09:28 PM
hey yo im CONTINUOUSLY gettin this message:
Failed when compiling
Line 432: [Hint] (10379:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12257:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
its happening with all scripts....and yes guys im an uber noob
u guys can some one help...this aint workin and its gettin pretty annyoing
Stitch
03-27-2008, 10:16 PM
Ehh... I would use it, but looking at all the posts about the errors... I would like to use it once it is fixed tho. Good luck.
pimp0nator365
03-28-2008, 02:26 AM
hey yo im CONTINUOUSLY gettin this message:
Failed when compiling
Line 432: [Hint] (10379:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12257:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
its happening with all scripts....and yes guys im an uber noob
same thing here bra
Timothegreat
03-28-2008, 06:34 AM
big update guys----> redownload!!! :D :D :D
heggs
03-28-2008, 06:40 AM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 5 Hours, 45 Minutes and 52 Seconds
Ores Mined: 1910
Loads: 67
Ores/hr: 493
Responded: 4 Times
Broken Picks: 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Decided to actually post a decent msg, i like it just the picks annoy me but anyways it works great, well done keep it up :)
Hmm, I ran the script, first off it wouldn't recognise I have a pick if it was equipped (yes I set equipped to true), so I changed it to false and unequipped it and it recognised it.
Then it logs in, sees I have pick, goes to stats then goes back to inventory then just stops with mouse over inventory...
My brightness is V Bright.. Do I require a different setting or something?
pimp0nator365
03-28-2008, 12:47 PM
i get this error
Line 432: [Hint] (10374:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12252:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
ive have the latest version
please help
issamawan
03-28-2008, 03:11 PM
i get this error
Line 432: [Hint] (10374:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12252:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
ive have the latest version
please help
alrite...i found the problem....i got scar 3.12D (from www.freddy1990.com) and got my srl and includes from that...then it started working!...l8r it says(after compiling) that there is a math error on line 200 in .../login.scar
help???
i hope the new version solves this problem...trying it now
issamawan
03-28-2008, 03:23 PM
Successfully compiled
Line 432: [Hint] (10376:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.12\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
SRL Compiled in 2656 msec
Creating the NickTPA.
[Runtime Error] : Math error in line 1211 in script C:\Documents and Settings\Owner\Application Data\Opera\Opera\profile\cache4\temporary_download \[SRL4] QuickPowerMiner3.0 pro.scar
there man
another bug
there is a problem in the linn where it says
begin
if FindDTM(PickDTM[i],x,y,MIX1,MIY1,MIX2,MIY2)then
dude needs fixing fast!!!
Rob_the_fool
03-28-2008, 03:52 PM
Line 1: [Error] (1:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Documents and Settings\Jeremy\Local Settings\Temporary Internet Files\Content.IE5\R630AOHR\%5BSRL4%5D%20QuickPower Miner3.0%20pro[1].scar
Timothegreat
03-28-2008, 07:22 PM
i get this error
Line 432: [Hint] (10374:1): Variable 'OLDMS' never used in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/AntiRandoms/AntiRandoms.scar
Line 87: [Error] (12252:1): Unknown identifier 'SetMouseMode' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar
ive have the latest version
please help
all of u leechers do not have latest version!!!!!!!!!!!
download subversion and get rev 14 -.-
after you do that you can talk again...
john smith
03-28-2008, 07:47 PM
seems to be running nicely, il give u a progress report sometime soon
ALil'Hope
03-28-2008, 10:19 PM
Thanks for the script, works wonderfully!
Striker13
03-29-2008, 12:32 AM
Include file C:\Program Files\SCAR 3.14\includes\SRL\SRL\Core\Bitmap.scar does not exist.
Include file C:\Program Files\SCAR 3.14\includes\SRL\SRL\Core\DTM.scar does not exist.
Whys it saying this. I have all the requirements.
Timothegreat
03-29-2008, 04:28 AM
Include file C:\Program Files\SCAR 3.14\includes\SRL\SRL\Core\Bitmap.scar does not exist.
Include file C:\Program Files\SCAR 3.14\includes\SRL\SRL\Core\DTM.scar does not exist.
Whys it saying this. I have all the requirements.
download includes and srl, make sure you have subversion and rev 14
blobmaster31
03-29-2008, 06:15 AM
is there any chance you can get banned??:D
Timothegreat
03-30-2008, 04:48 AM
is there any chance you can get banned??:D
With any script there is a chance you can get banned. But it is a risk i take every day. :p
doucette
03-30-2008, 04:02 PM
Good script, easy to use
jdisco
03-30-2008, 07:47 PM
I'm trying to do this with a single player. When I run it, scar just keeps returing "You have a Bronze Pick." It's like stuck in a loop.
Timothegreat
04-01-2008, 07:39 PM
Good script, easy to use
why thank you :)
nuthin
04-03-2008, 01:54 AM
could u make a tutorial for this script and not just that one for all scripts plz because i just dont get it i have the newest scar and srl so plz
issamawan
04-03-2008, 11:36 AM
Line 1: [Error] (1:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Documents and Settings\Owner\Application Data\Opera\Opera\profile\cache4\temporary_download \[SRL4] QuickPowerMiner3 (1).0 pro.scar
yo man wats this mean?
cud u plzzzzz help
thnx loads
Woolmer Died/issamawan
Timothegreat
04-04-2008, 01:37 AM
well anyone can make this script work in smart... they just have to add smart. ;)
yea.. read the turorial in smart section:)
its only 1 line to add per script .
and you just have to change your srl.scar a bit:)
effinpanda
04-04-2008, 03:31 PM
i never got this one to work...
Timothegreat
04-04-2008, 03:38 PM
i never got this one to work...
you dont have the correct srl version then... download subversion and update to rev 14
jdisco
04-04-2008, 04:43 PM
Ok I got it working finally. I got a report here:
----------------------------------------
Time Running: 54 Minutes and 30 Seconds
Ores Mined: 84
Loads: 3
Ores/hr: 92
Responded: 12 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fyi101
04-05-2008, 01:24 PM
Works great -- thanks for keeping this updated!
Noob xp1
04-05-2008, 04:09 PM
Nice script
Timothegreat
04-05-2008, 09:53 PM
thanks for using this, i need more progress reports though.
solomon800
04-06-2008, 01:26 AM
This script works great! I didn't copy the progress report, but it was around 30 mins until I had to shut down my computer.
Mickskillet
04-06-2008, 06:55 AM
never finds the gas works great every time until then though.
Necromaster
04-06-2008, 02:43 PM
Well, i get this Error: 'Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script C:\Users\Ahmed\AppData\Local\Temp\[SRL4] QuickPowerMiner3.0 pro-1.scar'
Would someone help, please?
Gazrat
04-06-2008, 03:59 PM
I got the power miner up and ive input my pw, user name and all that stuff...
the only thing i dont know is the srlstatsid and srlstatspw. A little help would be great.
Codeman
04-06-2008, 06:34 PM
it has anti ban?
Gazrat
04-07-2008, 01:49 AM
ok i got the pass and id all squared away. Now all i need to do is find bitmaps and the smart program. Im very new at this and not a clue at what im doing. from what im seeing timo the script looks great, i just cant use it yet =P
so close yet so far...
Alasmic
04-07-2008, 04:42 AM
Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script
havent used scar in a year
Codeman
04-07-2008, 08:44 PM
k... it works good but doesnt dectect gas
Baked0420
04-07-2008, 08:56 PM
I didnt try using it yet but I was just wondering which scar you need, can you please tell me, I know I'm still a leecher but I'm pretty knew. For now I'm trying to get a script to work then I wanna look at some of the stuff they used to learn some other codes.
Codeman
04-07-2008, 09:06 PM
you know the newest version of scar which is scar 3.15 you should check the tutorial island section for tuts how to set it up.
dstopgunner1
04-08-2008, 12:18 PM
great script , gj
Nice, I tried to run it for an hour, worked no problem.
AzureDragon
04-08-2008, 11:05 PM
I got this error when i tried to compile it :
Line 1480: [Error] (14690:4): Unknown identifier 'FindObjOre2' in script C:\Documents and Settings\Owner\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
Coh3n
04-09-2008, 12:09 AM
Looks pretty good, I'll try it out and see how it works :D
Timothegreat
04-10-2008, 11:42 PM
thanks tell me things i need to fix if i need to....
opposite
04-11-2008, 06:02 PM
what to do with this error?
Failed when compiling
Line 50: [Error] (13192:1): Semicolon (';') expected in script C:\eJay_se\[SRL4] QuickPowerMiner3[1].0 pro.scar
Pu3rto0wn
04-12-2008, 07:07 PM
works like a charm thanks :)
AzureDragon
04-12-2008, 10:17 PM
I fixed the error by removing the 2 after FindObjOre...does anyone else's script seem kind of slow? o.o
Brett_bs
04-13-2008, 05:56 AM
I got a runtime error when i tryd to use it. It has somethin to do with the declare players part
sk8terbitu
04-13-2008, 12:16 PM
if you get this error
Line 1480: [Error] (14690:4): Unknown identifier 'FindObjOre2' in script C:\Documents and Settings\Owner\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
all you have to do is remove the 2 after 'findobjore'
xentha
04-13-2008, 04:04 PM
It logs in, goes to the inventory and then continously says
You have a Bronze pickaxe
You have a Bronze pickaxe
You have a Bronze pickaxe
You have a Bronze pickaxe
You have a Bronze pickaxe
Havent seen any posts solving or people having the same problem. Im running the latest SCAR and SRL REV
Waddo
04-13-2008, 04:49 PM
hmm good script got me account banned tho rofl
hmm how do u do the auto respodner thing
trav280
04-13-2008, 10:37 PM
wow great script, i did about 10 loads and it worked perfectly for me
kevinlow
04-15-2008, 01:22 AM
my mouse is unrealistic it clicks on opposite rocks and the drop doesnt drop well. ionno bout u guys but it doesnt work well for me
MeetmeDeath
04-15-2008, 06:15 AM
When I try to start the script it says.
"Failed to Compile Line 1: [Error] (1:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Program Files\SCAR 3.12\Scripts\[SRL4] QuickPowerMiner3.0 pro.scar"
Also where do I find my SRL Username and Password and is there an actuall S.M.A.R.T. program I need to download? Thanks have not done this in a while lots of new stuff.
When I try to start the script it says.
"Failed to Compile Line 1: [Error] (1:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\Program Files\SCAR 3.12\Scripts\[SRL4] QuickPowerMiner3.0 pro.scar"
Also where do I find my SRL Username and Password and is there an actuall S.M.A.R.T. program I need to download? Thanks have not done this in a while lots of new stuff.
Make sure you follow the tutorials in the forum and download subversion and use scar to download all the includes such as SMART and SRL. Didn't work for me either until I did this.
hamish909
04-16-2008, 03:31 PM
Xentha that is'nt a problem I think its just a bug because mines does that but it still works.
If you are getting the FindObjOre2 Error Change it to FindObjOre and you should be good!!!!
sk8terbitu
04-16-2008, 09:50 PM
nice script! only one question why does it only run for 1 hour i saw in your proggie's that you have 4+ hour's why will it only run 1 for me?
please note i am useing the modded srl u know with the smart always enabled
may that be why?
savageotter
04-17-2008, 12:20 AM
i was using the modded version of srl and found no problems
sk8terbitu
04-17-2008, 12:59 AM
no there isen"t any problems it only run's for 1 hour and less....
sunny
04-18-2008, 12:48 PM
just about to try your script thanks heaps
hi i got this when i tryed your script
"Line 78: [Error] (12708:30): Syntax error in script C:\Program Files\SCAR 3.14\includes\SRL\SRL.scar"
not sure what i did wrong
thomaswood5
04-19-2008, 03:13 AM
Im getting this error:
Line 1280: [Error] (16626:12): Unknown identifier 'PickaxeHandle' in script H:\SCAR 3.15\Scripts\AutoMiner2.scar
I am using SCAR 3.15 and SRL 5
Edit:I updated my SRL and fixed the FindObjOre2 error mentioned earlier, works now, ill post a progress report and more extensive review later
kil8er
04-19-2008, 06:04 AM
well, I got this error :
Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script D:\Azureus Donloads schijf D\[SRL4] QuickPowerMiner3.0 pro.scar
thomas can you please post your change?
Finta1
04-19-2008, 06:48 AM
If you are getting the FindObjOre2 Error Change it to FindObjOre and you should be good!!!!
@kil8er
Did you read the previous posts?
sunny
04-19-2008, 07:10 AM
@kil8er
Did you read the previous posts?
what about this one
[Runtime Error] : Out Of Range in line 46 in script C:\Documents and Settings\Daniel\My Documents\[SRL4] QuickPowerMiner3[1].0 pro.scar
kil8er
04-19-2008, 12:26 PM
@kil8er
Did you read the previous posts?
yes i've seen but he says that he update his SRL and changed something in the script or not ?
sunny
04-19-2008, 12:31 PM
yes i've seen but he says that he update his SRL and changed something in the script or not ?
im not 100% sure but i think what you need to do is find the part of the scrip that says "FindObjOre2" and change it to "FindObjOre"
but as you can see by my above posts i am having trouble aswell so i dont realy know, but i geuss its worth a try
kil8er
04-19-2008, 12:39 PM
ok i'l try ;) And about your problem, maybe you've to update your SRL or download SCAR 3.15 if you don't have it.
kil8er
04-19-2008, 12:58 PM
Yes it works Thnx ;)
but now i get this error :(
Line 27: [Error] (27:26): Unknown identifier 'MMCX' in script C:\Program Files\SCAR 3.15\includes\SRL\SRL\Core\Math.scar
Finta1
04-19-2008, 03:18 PM
Cant help with that one lol.
im almost as new as you.
i just get a problem of my chars logging in, it says"you have a bronze pickaxe" in Scar then just logs my chars.
:confused:
Konvicted
04-19-2008, 04:59 PM
Can anyone tell me how i can get my srl stats id and pass? im pretty new... so yea lol a lil help would be appreciated ^_^
kil8er
04-19-2008, 05:15 PM
its your username &nd paswoord from srl-forums
kil8er
04-19-2008, 05:21 PM
its your username &nd paswoord from srl-forums
n3ss3s
04-19-2008, 05:46 PM
No it isn't, get an SRL Stats ID from www.stats.srl-forums.com.
kil8er, please do not provide false information, and don't pretend to do "lag double posts", there are six minutes between your posts.
thomaswood5
04-19-2008, 11:27 PM
Ok ive ran this script through last night, not much of a proggie because i alternate between 3 accounts, and i hav to reset it often because it doesnt handle randoms very well, but otherwise, it's a good script, also the only free for all mining script that isnt outdated, 4/5.
kil8er: MMCX is a constant that is meant to be in the SRL\Core\Globals.scar file, check that file to see if it is there, if not i could post a copy of what is meant to be there for you
ads_almighty
04-20-2008, 12:13 AM
Hi, Im just now downloading this, I'm gonna see how it goes. Ill post problems and advise for new downloader's later on.
- 12am Midnight tonight.... Happy holidays =]
ads_almighty
04-20-2008, 12:43 AM
21.03.2007
SCAR Divi 3.15 has been released! There's a new tolerance comparison
mode, more functions accessible through plugins, etc...
Download at: http://freddy1990.com/scar.php
If you bought SCAR, ask who you bought it from a refund NOW! SCAR is
completely FREE.
Loaded all chars. (NPCChars, TradeChars, SmallChars, StatChars, UpChars)
New client targeted
New client targeted
Successfully compiled (3374 ms)
File access error
SRL Compiled in 16 msec
(My user name)
Creating the NickTPA.
[Runtime Error] : Exception: Access violation at address 006CF23E in module 'scar.exe'. Read of address FFFFFFFC in line 227 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Login.scar
I get this error after it logs me in and pushes "Click To Play". After that the cursor stays still and i get the error. If you could help me out, It is greatly appreciated.
-Thx
thomaswood5
04-20-2008, 02:15 AM
hello again, ive realised another flaw i am facing with this script, it kinda just goes once through each account, then stops, is it meant to be starting again with the first account or not?
tetazoo
04-20-2008, 02:19 AM
Ran this with single player powermining iron and UseResponder set to False (quiet area and I was checking in on it) and it stopped with a broken pick (bronze...lol) and 2 hp. See the progress report below. Anti-ban features seem very good and a lot of randoms get handled (got stuck on Mordaut). The mouse handling looks very nice and natural. Very fast drop speed, but no option to not drop gems, etc. (part of the reason it's so fast, i'm sure). All-in-all, I think this is one of the nicest scripts in the Free area that I've seen so far.
I still can't get it to log in very well for me and I've had this problem with most other scripts. I'm wondering if it has anything to do with Windows Vista. Particularly when switching to the next player, it will go to the log in screen, move the mouse to username, but nothing gets typed. If I switch focus to another screen while it's in the middle of running, I can see it actually typing the username and password, so it's trying to type the right info, but it almost behaves like it's not getting the focus of the login screen or not clicking (just pointing the mouse there) or something like that. Any ideas on that?
UPDATE: If I go into Login.scar and comment out the first "ActivateClient;" command and then run the QuickPowerminer script and switch to the RuneScape window manually, everything works fine and it switches from one one player to the next with no problems. Something about ActivateClient isn't quite right. Is that defined somewhere?
******** FOUND FIGHTING RANDOM ********
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 2 Hours, 9 Minutes and 0 Seconds
Ores Mined: 675
Loads: 25
Ores/hr: 314
Responded: 2 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All Players False
Successfully executed
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Fights : 1 |
| Talks : 7 |
| Old Men : 5 |
| Lamps Solved : 2 |
| Capn Hand[s] : 1 |
| Boxes Solved : 4 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
what about this one
[Runtime Error] : Out Of Range in line 46 in script C:\Documents and Settings\Daniel\My Documents\[SRL4] QuickPowerMiner3[1].0 pro.scar
You need to change the setup with the characters. Most likely you are using more or less characters than what is stated in the code.
HowManyPlayers := 1; //<----make sure this is equal to the number of people you have included.
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
//If you only have one person using it quote out the other character slots.
Players[0].Name :='';
Players[0].Pass :='';
Players[0].Nick :='mine'; //3-4 letters from name
Players[0].Active:= True;
Players[0].Booleans[1]:= False; // True if new rocks. False if old. (new rocks have veins)
Players[0].Booleans[2]:= False; // Pick equipped?
Players[0].Strings[1]:= 'Iron'; // type of ore
Players[0].Integers[1]:= 55; // # of loads
sunny
04-20-2008, 02:40 AM
You need to change the setup with the characters. Most likely you are using more or less characters than what is stated in the code.
HowManyPlayers := 1; //<----make sure this is equal to the number of people you have included.
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
//If you only have one person using it quote out the other character slots.
Players[0].Name :='';
Players[0].Pass :='';
Players[0].Nick :='mine'; //3-4 letters from name
Players[0].Active:= True;
Players[0].Booleans[1]:= False; // True if new rocks. False if old. (new rocks have veins)
Players[0].Booleans[2]:= False; // Pick equipped?
Players[0].Strings[1]:= 'Iron'; // type of ore
Players[0].Integers[1]:= 55; // # of loads
thanks i'll give it a try
*edit* when i press play does it need to be logged in or out?
tetazoo
04-20-2008, 04:04 AM
Cant help with that one lol.
im almost as new as you.
i just get a problem of my chars logging in, it says"you have a bronze pickaxe" in Scar then just logs my chars.
:confused:
Did you get this while trying to mine copper? It might be having trouble finding the copper (color change?). I tried raising the tolerance from 5 up to like 9 and still got the same problem in Fally south mine. I haven't had any problems mining tin or iron anywhere, though.
thomaswood5
04-20-2008, 04:11 AM
I think i have fixed the problem i mentioned earlier, correct me if i am wrong(i am new to SCAR), but in the MainLoop procedure, it has a loop within a loop, and a break statement in the inner one which im sure was only meant to break the inner loop, but i think is breaking both, i think i have fixed this by putting a loop around part of the main procedure (the one the ends with an end.), but this is only a quick, easy way out, and will have other side effects, someone who is better than me at SCAR should be able to fix it properly, or at least tell me that me theory on it is wrong.
sunny: i dont believe it matters, but i prefer to have it logged out.
sunny
04-20-2008, 04:52 AM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 23 Minutes and 38 Seconds
Ores Mined: 81
Loads: 3
Ores/hr: 205
Responded: 0 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
it kept on telling me i had a bronz pickaxe is it suposed to?
and after awile it came up with
[Runtime Error] : Exception: Access violation at address 0051C09F in module 'scar.exe'. Write of address 033EFE00 in line 29 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Mouse.scar
_______________________________________________
@thomaswood5 thanks i will have to see wich works better
thomaswood5
04-20-2008, 05:15 AM
Sunny: Mine constantly tells me i hav a bronze pickaxe also, i just ignore, as for your actual error though, check your file and internet access firewall settings in the options, if either of them is set the 'disallow all', that could be your problem, set them to 'allow all' (dont bother setting 'Always ask' it interupts your script too much). Hope that helps
sunny
04-20-2008, 05:53 AM
Sunny: Mine constantly tells me i hav a bronze pickaxe also, i just ignore, as for your actual error though, check your file and internet access firewall settings in the options, if either of them is set the 'disallow all', that could be your problem, set them to 'allow all' (dont bother setting 'Always ask' it interupts your script too much). Hope that helps
yeah i've got it set to allways allow
i'll try again later going to start making my army
*edit* i keep geting this
New client targeted
Successfully compiled (5985 ms)
SRL Compiled in 31 msec
Creating the NickTPA.
Couldnt get pick colors, Equip or have in inventory.
NextPlayer
Creating the NickTPA.
Couldnt get pick colors, Equip or have in inventory.
NextPlayer
Creating the NickTPA.
Couldnt get pick colors, Equip or have in inventory.
NextPlayer
an it was allso missing when it tryed to log me in it would click but wouldnt type(remember reading something like that tho so will have a look)
kil8er
04-20-2008, 12:36 PM
yeah it works! Does anybody now how to run it a bit faster?
scarman001
04-20-2008, 09:30 PM
Wow, This works really well, set it up one night, came back the next day (after school) and went up 10 levels! (36 to 46!!!!)
Thank you!
tetazoo
04-20-2008, 10:17 PM
It actually caught the gasses this time, probably because I was using a bronze pick instead of an addy pick (Murphy's Law and all that). This run stopped on Sgt Damien.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 1 Hours, 38 Minutes and 14 Seconds
Ores Mined: 540
Loads: 20
Ores/hr: 330
Responded: 2 Times
Broken Picks: 0
Gasses found: 4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 5 |
| Old Men : 3 |
| Capn Hand[s] : 1 |
| Boxes Solved : 2 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
Timothegreat
04-21-2008, 05:20 AM
glad to see people are helping each other out and so forth.
Also glad to hear it caught all the gasses tetazoo... might depend on where your mining and the type of rock.
sunny
04-21-2008, 08:05 AM
hi this script misses the username: and password: sometimes and at the moment it logs in checks stats goes back to inventory and then just stands there
not sure whats wrong
can someone help
roflmfao555
04-21-2008, 10:03 AM
Runs perfectly for me, speed is fine. Only problem I can see so far is that it's constantly reporting which pickaxe I'm holding in the debug box. Otherwise, good job :). I'm using it on one account so when I ran it, it came up with an "Out of Range" error. I just replaced the other 3 account spots with the same account for it to run smoothly. Changing the number of players didn't work either for some reason. FindObjOre2 Error also appeared, but I just removed the 2.
PS: I tried SMART, it kind of messes up since the unsigned version takes a while to load. It assumes I don't have a pickaxe and stuff cause they haven't loaded yet. For some reason it also won't log in. I logged in manually and then let it run, and it works fine.
EDIT: A run function would be good too, unless there's one and I haven't noticed it :P.
EDIT2: I don't see the reason, but my anti-randoms aren't working. Niles and Security Guard were completely ignored by the bot.
Rubenos
04-21-2008, 05:01 PM
Works like a charm! Coal mining only could be a little bit faster, unless that small thing it works fine!
Timothegreat
04-21-2008, 07:48 PM
well if its having trouble logging in remove the line that says activateclient.
hey, i tried this script today, and when i executed it, it just logged me out and said "script completed"
this is the first script i've ever run, idk, any help?
if it helps, it says:
Successfully compiled (2802 ms)
SRL Compiled in 16 msec
Found Compass
Creating the NickTPA.
Couldnt get pick colors, Equip or have in inventory.
NextPlayer
bete****
Creating the NickTPA.
Couldnt get pick colors, Equip or have in inventory.
NextPlayer
Bioshocker3000
04-26-2008, 05:12 AM
ok i am a total dummy! please help me! I got the following errors:
Line 42: [Error] (13175:26): Unknown identifier 'Tuue' in script C:\Documents and Settings\Ginu\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
Line 1507: [Error] (14640:4): Unknown identifier 'FindObjOre2' in script C:\Documents and Settings\Ginu\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
and i have no clue how to do:
const
SRLStatsID = ''; // SRL Stats ID Number
SRLStatsPW = ''; // SRL Stats Password
UseResponder = True; // Use autoresponder? (recommended)
SleepMode = False; // sleep mode? (single player)
SleepFor = 10; // minutes to sleep (add random 5 minutes to it)
RunDir = 'E'; // direction to run if in fight
// N for north, S for south, etc.
Procedure DeclarePlayers;
Begin
HowManyPlayers := 4;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
Players[0].Name :='';
Players[0].Pass :='';
Players[0].Nick :=''; //3-4 letters from name
Players[0].Active:= True;
Players[0].Booleans[1]:= True; // True if new rocks. False if old. (new rocks have veins)
Players[0].Booleans[2]:= False; // Pick equipped?
Players[0].Strings[1]:= 'Tin'; // type of ore
Players[0].Integers[1]:= 3; // # of loads
Players[1].Name :='';
Players[1].Pass :='';
Players[1].Nick :=''; //3-4 letters from name
Players[1].Active:= True;
Players[1].Booleans[1]:= True; // True if new rocks. False if old.
Players[1].Booleans[2]:= False; // Pick equipped?
Players[1].Strings[1]:= 'Copper'; // type of ore
Players[1].Integers[1]:= 3; // # of loads
Players[2].Name :='';
Players[2].Pass :='';
Players[2].Nick :=''; //3-4 letters from name
Players[2].Active:= True;
Players[2].Booleans[1]:= True; // True if new rocks. False if old.
Players[2].Booleans[2]:= False; // Pick equipped?
Please help me with this i just got this like 20 mins ago and i feel like a complete retard because i cant figure this out! again please help this retard!
EDIT: I got it started once then it logged me out =( then i retryed it and i got this:
et a stats account soon at
http://stats.srl-forums.com
Creating the NickTPA.
** Warning in GameTab: 4 does not exist**
Couldnt get pick colors, Equip or have in inventory.
** Warning in GameTab: 14 does not exist**
NextPlayer
** Warning in GameTab: 14 does not exist**
Creating the NickTPA.
Nickname isnt set, taking the username instead..
[Runtime Error] : Exception: in line 58 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Math.scar
zimmer
04-26-2008, 07:55 AM
yea idk i have problems with this script too..only one of the scripts i have tried that has been workign successfully was pinky's.. but thats for wcing..
emerica27
04-26-2008, 11:19 AM
I hope this works good I'm gonna download.
badrangegirl
04-26-2008, 12:41 PM
u made a great script, meybe in next version u can do SMART in it?
I don't say u have to do it, bud meybe u can do it
zimmer
04-26-2008, 04:32 PM
tried it out and it did work for a bit, lost a pick head :-(, and broke an axe *which actually killed my player since it has 9hp*
Time Running: 39 Minutes and 56 Seconds
Ores Mined: 351
Loads: 13
Ores/hr: 527
Responded: 0 Times
Broken Picks: 0
Gasses found: 0
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 2 |
| Old Men : 1 |
| Frog Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
Did randoms perfectly...except axe head and gas once..axe head might wanna be fixed
nitefall123
04-26-2008, 06:33 PM
Line 1507: [Error] (14728:4): Unknown identifier 'FindObjOre2' in script C:\ ???
how do I fix this? no matter what I do it just keeps reoccurring. I tried removing the 2 in "FindObjOre2" then it just says Successfully compiled and just shuts down on me doing nothing...
Additional information
- mining iron at the Al Kharid site
- using SMART
- I have the newest version of scar
zimmer
04-26-2008, 07:02 PM
Line 1507: [Error] (14728:4): Unknown identifier 'FindObjOre2' in script C:\ ???
how do I fix this? no matter what I do it just keeps reoccurring. I tried removing the 2 in "FindObjOre2" then it just says Successfully compiled and just shuts down on me doing nothing...
Additional information
- mining iron at the Al Kharid site
- using SMART
- I have the newest version of scar
try deleting the 2 from 'FindObjOre2'..it seemed to work for me
*edit
Gas protector doesn't work at all..my pick is always broken, or even lost when the pick head falls off..guy just logs out right after lol maybe you can fix that later?
Neerthy101
04-26-2008, 07:33 PM
gonna try
Screamer
04-26-2008, 10:42 PM
Line 33: [Error] (13166:21): Identifier expected in script C:\Documents and Settings\Owner\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
What Do i Do ???
Whakey
04-27-2008, 05:47 AM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 1 Hours, 14 Minutes and 12 Seconds
Ores Mined: 270
Loads: 10
Ores/hr: 218
Responded: 3 Times
Broken Picks: 0
Gasses found: 3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Stopped after that, do you kno why? 2 Chars could still mine -.-
faxity
04-27-2008, 10:42 PM
Line 1507: [Error] (14728:4): Unknown identifier 'FindObjOre2' in script C:\Documents and Settings\Administrator\Bureaublad\[SRL4] QuickPowerMiner3.0 pro.scar
???
zimmer
04-28-2008, 01:05 AM
Time Running: 50 Minutes and 27 Seconds
Ores Mined: 432
Loads: 16
Ores/hr: 514
Responded: 0 Times
Broken Picks: 0
Gasses found: 0
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 2 |
| Old Men : 1 |
| Lamps Solved : 2 |
| Boxes Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
Did good this time
badrangegirl
04-28-2008, 07:11 AM
it's a good script, bud can u try to do SMART in it?
zimmer
04-29-2008, 10:32 PM
You have a Rune pickaxe
You have a Rune pickaxe
Passed Color Diversity: 56
Total colors found: 62
Passed Color Diversity after filtering the colors: 43
Total colors found, after filtering: 62
Gas Gave TRUE
Time taken: 15
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 52 Minutes and 16 Seconds
Ores Mined: 486
Loads: 18
Ores/hr: 558
Responded: 1 Times
Broken Picks: 0
Gasses found: 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ammartin
04-30-2008, 04:39 AM
Just tried this script
Line 41: [Error] (18668:12): Unknown identifier 'BOOLEANS' in script C:\Program Files\SCAR 2.03\Scripts\[SRL4] QuickPowerMiner3.0 pro.scar
faxity
04-30-2008, 06:04 PM
had that problem too at start, try updating everything by folowing the guide from the link timothegreat has in his post... http://www.villavu.com/forum/showthread.php?t=25985?t=28384&highlight=subversion
after I folowed that everything went fine to me, except the findobrobject2 or somting but just delete the 2 from that word and it should work fine...
question, why doesn't this update my stats on stats.srl-forums.com ? I have everything correctly filled in on the script..
also when I find a gas, it just keeps on mining causing my axe to break, isn't this script supposed to not make that happen
aligaligalig
05-02-2008, 01:44 PM
Does it also drops random items? cause its bin working for an half an hour now and i got a mystery box for like 5 minutes now..
partypope
05-03-2008, 08:08 PM
Amazing script thankies :D
partypope
05-03-2008, 08:19 PM
to get rid of the Findore bug just get rid of the 2 behind it.
alberttai
05-03-2008, 09:24 PM
Thanks for all the coal i gotten *wink*
ryanhoffman5
05-04-2008, 02:29 PM
does anyone know of a good banker i can start using before i become a JR member and hopefully soon to be full member
Timothegreat
05-04-2008, 03:38 PM
Only Jr. members have access to banking scripts.
Sorry
ryanhoffman5
05-04-2008, 04:38 PM
for some reason when i run this script at varrock south east mine by the iron it closes scar and does nothing... anyone know anything about this?
also here is a recurring error i can't seem to fix...
Successfully compiled (2824 ms)
SRL Compiled in 1547 msec
Stupid leecher...
Get a stats account soon at
http://stats.srl-forums.com
[Runtime Error] : Out Of Range in line 46 in script
Pizza
05-04-2008, 07:19 PM
Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script C:\Users\ME\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
What did i do wrong :O
noobster
05-04-2008, 11:15 PM
QuickPower/"|"\iner
Current Version: 3.0
http://garrett92.freehostia.com/ScriptSignatures/ScriptPicture.php/513/QuickPowerMiner by Timothegreat/1/2/3/4/ScriptStats.png
TO MAKE THIS SCRIPT WORK:
To get SRL 4 rev 14:
Click here to download subversion (http://subversion.tigris.org/files/documents/15/39559/svn-1.4.5-setup.exe)
Use this great tutorial (http://www.villavu.com/forum/showthread.php?t=25985?t=28384&highlight=subversion) by Timer the rest of the way.
USE PICKAXE UNEQUIPPED
Reputation
If you want to help out dont forget to post proggies, rate the thread, or give me rep
Features
1. Custom Humanlike Mouse
2. Quickest powermining possible!
3. Multi-player
4. Good gasfinder
5. Many types of ore
USE LOW DETAIL PLEASE
Bugs
None yet :)
Progress Reports
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 5 Hours, 45 Minutes and 52 Seconds
Ores Mined: 1910
Loads: 67
Ores/hr: 493
Responded: 4 Times
Broken Picks: 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer by Timothegreat
----------------------------------------
Time Running: 4 Hours, 14 Minutes and 4 Seconds
Ores Mined: 972
Loads: 36
Ores/hr: 230
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 1 |
| Dwarfs : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 1.7 by Timothegreat
----------------------------------------
Time Running: 2 Hours, 45 Minutes and 52 Seconds
Ores Mined: 810
Loads: 30
Ores/hr: 293
Responded: 1 Times
Broken Picks: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PLEASE POST PROGRESS REPORTS
it never worked with me i have troule wit the srl bit when u open it y wont it show up nd i done everything right =[
Timothegreat
05-04-2008, 11:54 PM
Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script C:\Users\ME\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
What did i do wrong :O
delete the 2 in "findobjore2"
it should be findobjore.
Drunken88
05-05-2008, 02:41 PM
Oh my god, this is so fucking awesome :) I Cant believe that i used to pay for nexus :/
Fr0zenFire
05-05-2008, 02:45 PM
Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script
No scripts ever work for me D: Im using Scar 3.1 why isnt it working D:
Drunken88
05-05-2008, 03:00 PM
Line 1507: [Error] (14629:4): Unknown identifier 'FindObjOre2' in script
No scripts ever work for me D: Im using Scar 3.1 why isnt it working D:
That's been answered 500 times, Change FindObjOre2 to FindObjOre
And, i managed to mine 100 rocks, then the axe broke :/ Isn't there gas anti-random?
Pizza
05-05-2008, 05:18 PM
delete the 2 in "findobjore2"
it should be findobjore.
Awesome, thanks for help :)!
Fr0zenFire
05-05-2008, 05:54 PM
After changing FindObjOre2 to FindObjOre I get:
[Runtime Error] : Out Of Range in line 46 in script
perrz
05-06-2008, 12:03 AM
Thanks, very usefull
E.M.E
05-07-2008, 03:47 PM
Line 1507: [Error] (14640:4): Unknown identifier 'FindObjOre2' in script C:\Documents and Settings\XPPRESP3\Desktop\[SRL4] QuickPowerMiner3.0 pro.scar
FSGood74
05-07-2008, 08:38 PM
great script thxs!
Timothegreat
05-07-2008, 09:48 PM
change findobjore2 to findobjore and also set up your players correctly as in number of players should be filled in properly. Delete unused slots.
shadowmarkus
05-07-2008, 10:09 PM
Very nice script, got me from 15-30 mining:)
Timothegreat
05-08-2008, 11:22 PM
updated detects randoms easily if you set up your nickname properly and i hope gas finding is faster.
xenomorph911
05-10-2008, 01:03 PM
how do i get it to do the autoing...???
playah8tah
05-10-2008, 02:53 PM
i haven't had a chance to try this yet, but i'm new to the whole scar thing and i was just wondering if there were any mining script such as this that banked your ores instead of dropping them?
Timothegreat
05-10-2008, 05:32 PM
yea but you have to be part of the forum for at least a week and have at least 10 posts to access them. (don't spam)
playah8tah
05-10-2008, 09:46 PM
yea but you have to be part of the forum for at least a week and have at least 10 posts to access them. (don't spam)
thanks for the help :)
i tried you script out and it works wonderfully, so 5 stars....
oh, and +rep for you
Good work mate will be using this script if its still upto date when i finish my fishing on my army... adn by the looks at it i think it will be up 2 scrats in a week or so lol its doing pretty well atm lol had a few replies here lol my eyes r hurting now lol ty again...............
runesux
05-12-2008, 02:16 PM
Line 1: [Error] (1:1): Unable to register function function FindGapsTPA(TPA : TPointArray; MinPixels: Integer): T2DPointArray; in script C:\......\.....\.....\....\.....\[SRL4] QuickPowerMiner3.1 pro.scar
Logoman
05-13-2008, 06:30 PM
Include file E:\Program Files\SCAR 3.15\includes\SRL\SRL.scar does not exist.
Failed when compiling any way i can fix this
p.s im a noob =P
Timothegreat
05-13-2008, 07:27 PM
download srl and subversion then checkout at srl subversion 16
Hmm the script is very great and works but the gas detection won't work.. :(
Or maybe it works but i have done something wrong :P
Plz could someone help? :)
I have the nick set correctly and i have subversion too.. :S
Chemonk
05-13-2008, 08:41 PM
Why do I keep getting Line 34: [Error] (34:1): Duplicate identifier '' in script C:\Program Files\SCAR 3.11\includes\SRL\SRL\Core\Globals.scar? I'm semi-new to this program so I'm not that sure what I should do to fix this. Any help would be greatly appreciated.
Edit: Ugh, now I'm getting Line 78: [Error] (12717:21): Syntax error in script C:\Program Files\SCAR 3.15\includes\SRL\SRL.scar.
phobotics
05-13-2008, 08:48 PM
wow this great n1 =)
Timothegreat
05-14-2008, 12:42 AM
Hmm the script is very great and works but the gas detection won't work.. :(
Or maybe it works but i have done something wrong :P
Plz could someone help? :)
I have the nick set correctly and i have subversion too.. :S
might just be where your located, because im getting some more gas detections on srl stats, so it must be working
loliker123
05-14-2008, 12:14 PM
Nice script 10/10 + rep I will be using it
might just be where your located, because im getting some more gas detections on srl stats, so it must be working
Hmm i'm at Al Kharid and mining the old iron..
It hasn't detected gas 3 times and i have repaired my pick all times :(
runesux
05-14-2008, 01:34 PM
It is nice, but it dosen“t escape from goldem
Timothegreat
05-14-2008, 08:36 PM
Hmm i'm at Al Kharid and mining the old iron..
It hasn't detected gas 3 times and i have repaired my pick all times :(
dont use the script in al karid then, try varrock east or dwarven mines
dystopia08
05-15-2008, 04:11 AM
What is sleep mode?
Thanks in advance
dont use the script in al karid then, try varrock east or dwarven mines
Ookay i'll test there :)
Heey thanks now it works look this:
----------------------------------------
Time Running: 1 Hours, 0 Minutes and 44 Seconds
Ores Mined: 459
Loads: 17
Ores/hr: 453
Responded: 13 Times
Broken Picks: 0
Gasses found: 3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
akad_ad
05-15-2008, 03:26 PM
This war veary good. it was veary for help ty:)
Kalle
05-15-2008, 03:53 PM
This was the first script i tested here and it worked well, will post a proggy!
Chemonk
05-15-2008, 06:58 PM
This isn't working for me for some reason. The only thing that happens is the mouse moves around clicking all over and making me run around. :(
mrpager
05-15-2008, 09:57 PM
mined iron in east varrock mine...it stopped when the pick head flew off somewhere...what random is that?
edit: whoops i forgot, nice script works well lol
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 1 Hours, 34 Minutes and 24 Seconds
Ores Mined: 392
Loads: 14
Ores/hr: 249
Responded: 8 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Queso
05-15-2008, 11:29 PM
I'm gonna download this later to help myself learn SRL. I'll see afterwords if I can test it and give a proggy.
Timothegreat
05-16-2008, 02:14 AM
thanks for feedback :)
mrpickle
05-16-2008, 02:20 AM
I'm still very new =] (my second day attempting scripting). I need a specific help as to how to work the areas
- Curve:= 3.0; //average curve.
cx := Curve * (cp[1].x - cp[0].x);
bx := Curve * (cp[2].x - cp[1].x) - cx;
ax := cp[3].x - cp[0].x - cx - bx;
what do I place here?
and
- GetMousePos(sx, sy);
Dist:= Distance(sx, sy, ex, ey);
CtrlPoints[1]:= Point(sx, sy);
CtrlPoints[2]:= CtrlP1;
CtrlPoints[3]:= CtrlP2;
CtrlPoints[4]:= Point(ex, ey);
theta_inc:= 1.0 div Dist;
theta:= 0.0;
what do I place here? (sry for being the world's worst noob, but I'm starting somewhere =].
Timothegreat
05-16-2008, 02:24 AM
dont mess with that stuff, its for very advanced scripters only
mrpickle
05-16-2008, 02:29 AM
well, thne is there a more simple script that I might use? (send me an example for the mining of the mining guild?) i need something real and works to reference from if it's not too much trouble.
I thank you for you help and generosity =].
NiCbaZ
05-16-2008, 02:29 AM
[offtopic]Timo PLease get on msn look at my siggy, your pm box it full very cool project@!
iPausanius
05-17-2008, 03:54 AM
Good script, had it run for about 2 hours until the pick axe head flew off. Although one slightly weird thing is that in between the time interval when mining the mouse moves around a right clicks the inventory for no reason, not sure why.
Good Job
Zlakata
05-17-2008, 10:11 AM
Very nice script, works 100%
here's my proggie
[SRL4] QuickPowerminer 3.0 by Timothegreat
----------------------------------------
Time Running: 1 Hours, 33 Minutes and 47 Seconds
Ores Mined: 405
Loads: 15
Ores/hr: 259
Responded: 0 Times
Broken Picks: 0
Gasses found: 2
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 6 |
| Ricks : 3 |
| Old Men : 1 |
| Boxes Solved : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
EDIT: i found a little problem with gas avoiding, got 2 broken picks already, but nice script mate 8)
lennoc
05-17-2008, 02:43 PM
look good:)
warrior993
05-17-2008, 03:26 PM
Like many other people have said, the gas detection doesn't work very well. My pickaxe broke 4 times...
Preston8
05-17-2008, 11:20 PM
When ever i try it'll bring
** Warning in GameTab: 4 does not exist**
Couldnt get pick colors, Equip or have in inventory.
** Warning in GameTab: 14 does not exist**
NextPlayer
then log me out, or just does not do anything is there anything i gotta change?
Von(EST)
05-18-2008, 01:00 PM
Cant get it to work says
**Warning in GameTab: 4 does not exist**
Couldnt pick colors, Equip or have inventory.
**Warning in GameTab: 14 does notexist**
Von(EST)
05-18-2008, 02:37 PM
Sorry got solution by deleting all unused player slots
Winguh
05-18-2008, 03:00 PM
Hi, this seems like a great script, but I need to know how to get it started, I inputed the SRL thing, and I opened it up and it said to fill in lines 23 - 60, problem is, I have no idea what half of those things mean! So if anyone could help me it would be fantastic.
Thanks
Von(EST)
05-18-2008, 05:18 PM
SRLStatsID = 'your srl forum username'; // SRL Stats ID Number
SRLStatsPW = 'your srl forum password'; // SRL Stats Password
UseResponder = True; // Use autoresponder? (recommended)
SleepMode = False; // sleep mode? (single player)
SleepFor = 10; // minutes to sleep (add random 5 minutes to it)
RunDir = 'E'; // direction to run if in fight
// N for north, S for south, etc.
Procedure DeclarePlayers;
Begin
HowManyPlayers := 1; // NUMBER OF PLAYERS!!!!!
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0; // PLAYER TO START
{DELETE OR "GREEN OUT" UNUSED PLAYER SLOTS}
Players[0].Name :='your runescape username';
Players[0].Pass :='your runescape password';
Players[0].Nick :='3 letters from your runescape username start from letter 2'; //3-4 letters from name
Players[0].Active:= True;
Players[0].Booleans[1]:= True; // True if new rocks. False if old.
Players[0].Booleans[2]:= False; // Pick equipped?
Players[0].Strings[1]:= 'here put ore name what you want to mine iro,tin,gold,silver,copper,'; // type of ore
Players[0].Integers[1]:= 20; // # of loads
all other things leave alone
open runescape client
drag that little sniper icon from scar to runescape window
presst start in scar
if you are dragging that sniperthing watch that scars window isnt on runescape window thats shoult be all
I.F.reaper
05-18-2008, 05:30 PM
Very nice script. Im going to for sure use this :)
Timothegreat
05-18-2008, 06:47 PM
SRLStatsID = 'your srl forum username'; // SRL Stats ID Number
SRLStatsPW = 'your srl forum password'; // SRL Stats Password
not your srl forum user and pass, its you user and pass from srl stats
stats.srl-forums.com (http://www.stats.srl-forums.com)
ignite
05-18-2008, 07:09 PM
Why do i get this error ?
Loaded all chars. (NPCChars, TradeChars, SmallChars, StatChars, UpChars)
Failed when compiling
Line 58: [Error] (237:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Math.scar
Von(EST)
05-18-2008, 07:23 PM
Sorry my mistake your right Timothegreat
ignite
05-18-2008, 07:28 PM
Anyone know ? I get an error like that on almost every script
Timothegreat
05-18-2008, 08:33 PM
your not at rev 16 maybe???? or just try redownloading
ignite
05-18-2008, 08:50 PM
Ok well i have filled it all in but i get this
Line 27: [Error] (27:26): Unknown identifier 'MMCX' in script
Failed when compiling
I went file > download srl aswell
leroy270
05-19-2008, 06:25 AM
can anyone teach me how to use SCAR? dun try to tell me to read the help. i just simply dun get it
PhantomCode
05-19-2008, 08:57 AM
Bugs
None yet :)
Hmmm...
I filled in all my details etc. but it just doesn't work!
I have tried with and without equipped a pickaxe (and true/false values)
I have tried High and Low details
I have tried using a different pickaxe
But it just doesn't work!!!:duh:
It just logs on, then logs off! Very frustrating!
It seems to walk around a bit when there are no rocks on screen.
If I set "Pick equipped?" to True it checks the equip screen, then logs off!
Please Help!:(
mrpickle
05-19-2008, 10:52 AM
the noob got his first script working properly XD lol.
iron mined: 810
Loads Done: 30
Gas Found: 1
Slept: 4
Worlds Switched: 4
Active: True
Loads till nap: 2
That works awsome, but i made it work while I was doing other stuff, 1 person got suspicious and asked if I was auto miner, I had to take over to reply and stuff... causally logged out in coversation (whew).
PhantomCode
05-19-2008, 11:18 AM
the noob got his first script working properly XD lol.
double lol, this noob too!
I just changed the color values so it picked up my pickaxe!:duh:
Thanks a lot! great script!:) :spot:
----------------------------------------
Time Running: 16 Minutes and 3 Seconds
Ores Mined: 108
Loads: 4
Ores/hr: 403
Responded: 0 Times
Broken Picks: 0
Gasses found: 0
-----------------------------------------
^after a couple of other tries :redface:
markmccain
05-19-2008, 08:20 PM
The script went through the login but thats all that it did. It didn't start mining. Also the nick name was quite confusing, and it wouldn't let me leave it blank. i am using 3.15b and sub 16.
blastik
05-20-2008, 01:50 AM
I needed to get my mining up for quicker pure essence and this worked awesomely. Good Script! :)
jose89
05-20-2008, 12:37 PM
This code works good for a short time. When I comeback after leaving it for a long time it is always logged off and with a broken pickaxe.
What part of the code do I moadify to make it detect the gas better?
Hi Everyone Long Time Since Iv Been Here :)
I just tried using your script and it looks really good!
One problem it carnt detect pickaxe colour and also... it just walks around... has anyone no why? if this has already been disscused on another page, then what page number because am not reading 24 pages haha
thanks peps
Rep + the person who ansrews me ;)
Timothegreat
05-20-2008, 07:49 PM
i just updated so no one should have problems with the pickaxe finding...
jose89
05-20-2008, 08:31 PM
Can you fix one minor problem thats making everyone have broken pickaxes?
You see it checks the pickaxe's color and to see if gas is coming out and if this is false it mines the rock otherwise it walks away.
Can you make it so that it checks the rock colors after it clicked on the rock like to double check but not click this time.
I was mining with this and it checked the rock and once it clicked on the rock, gas started coming out of the rock but it continue to mine since it thinks that the rock is safe to mine.
The fix was grate :)
an your script is very good!
I had a few problems with droping the ore it missed out like 9 ore's, so i fixed it myself maybe you should put that in your next fix am sure it wouldnt take you long
heres my proggie, ill post another tommrow
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.2 by Timothegreat
----------------------------------------
Time Running: 9 Minutes and 48 Seconds
Ores Mined: 28
Loads: 1
Ores/hr: 171
Responded: 0 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
an i rep + you
Timothegreat
05-21-2008, 12:28 AM
reuploaded a fixed version
PhantomCode
05-21-2008, 07:12 AM
Yeah, I've been getting the gas problems too.
Apart from that it seems to be working fine.
My proggie:
----------------------------------------
Time Running: 28 Minutes and 32 Seconds
Ores Mined: 189
Loads: 7
Ores/hr: 397
Responded: 2 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'll try out the fixed version.
PhantomCode
05-21-2008, 09:19 AM
SORRY FOR THE DOUBLE POST!!!
I'm still having trouble, it doesn't recognize an addy pick.
It also though that a steel pick was iron!
Any ideas?
wisp wings
05-21-2008, 10:00 AM
Okey... Worked fine for me. I used a rune pick.
PhantomCode
05-21-2008, 10:50 AM
Yeah, my test account's only up to lvl 38.:redface:
I got past that non-pickaxe-recognising thing by increasing the color tolerance on Addy axes but then when I got back I had lost my pickaxe head. I guess I didn't change that part it uses to find dropped heads.:(
Also, could you add an option to keep gems and/or items from random events?
Although that would probably mean this script would have to go to the section that noobs like me can't access. Shootin' myself in the foot again...
Anyway, still love the script. Keep up the good work!:spot:
y0m0mma0123
05-21-2008, 08:50 PM
i had a problem with the mining script it just would not find the rocks..............plzzz help:confused:
kingmyth
05-22-2008, 01:53 AM
it works well enough for me.
msh4k3
05-22-2008, 07:42 AM
worked allright dunno went wrong stopped premature on last guy =x
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[SRL4] QuickPowerminer 3.2 by Timothegreat
----------------------------------------
Time Running: 52 Minutes and 29 Seconds
Ores Mined: 189
Loads: 7
Ores/hr: 216
Responded: 1 Times
Broken Picks: 0
Gasses found: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| Talks : 1 |
| Old Men : 1 |
| ScapeRunes : 1 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
PhantomCode
05-22-2008, 07:52 AM
it works well enough for me.
What pick do you use and what rocks do you mine?:confused:
For me, it was only some that didn't work.
I think maybe the Autocolor isn't working.:rolleyes:
Perhaps you could revert it to a manual function,Tim?
y0m0mma0123
05-22-2008, 09:02 PM
i just now got the script to work now but so far it is woking good.
it got me up 4 lvls in about 4 hours
Timothegreat
05-22-2008, 09:36 PM
well people probably have to fix the ore colors inside the script...
darkcat
05-23-2008, 02:08 AM
this is great script works great thanks
PhantomCode
05-23-2008, 09:52 AM
it got me up 4 lvls in about 4 hours
lol, that doesn't mean much when we don't know what level you were on!:rolleyes:
It's working buggily for me but it still got my test account to ~ lvl 40 after a couple of hours working.
Let's keep working to make it better!:D
iky789
05-23-2008, 09:56 AM
this looks good but can i really wont to get a auto essence miner and banker can any one help me with this
PhantomCode
05-23-2008, 12:37 PM
this looks good but can i really wont to get a auto essence miner and banker can any one help me with this
You'll have to become a member to be able to access scripts that can make money for you. :( (such as an ess miner+banker)
broke another pickaxe .. timo:(
it "boomed" the gass.. and it found a fighting random (inflicted damage by the "boom");
it seems the gassfinder is still not flawless called:(
Timothegreat
05-23-2008, 08:54 PM
the gasfinder is properly called but it fails way too much, ive run it on my screenies of gas and it doesnt detect...
if you want pvh you can make a gas detector for me..
BOTTOM LINE: IM NOT UPDATING THE GAS FINDER FOR A LONG TIME....
markmccain
05-23-2008, 10:44 PM
I tried to run the script on 3.15b svn 16 and it loaded up runescape but once it got into runescape it gave me this error [Runtime Error] : Exception: Access violation at address 006CF132 in module 'scar.exe'. Read of address FFFFFFFC in line 227 in script C:\Program Files\SCAR 3.15\includes\SRL/SRL/Core/Login.scar I don't know what i means or what i am doing wrong
markmccain
05-23-2008, 10:59 PM
I GOT IT TO WORK!! as i stated in an earlier post i was having an issue with loggin.scar file trying to write my user name to TheFile i deleted this line and saved it and ran it again worked great. it detected gas well. but it kept on clicking on rocks that had already been mined so all in ill it still doesn't work great i am going to change the colors and then see if it works better.
Rizowski
05-23-2008, 11:23 PM
Wow Thanks for the script it is way kool
cstrkd1
05-24-2008, 12:15 AM
when i used it it just mined a few ores and then logged out and didnt log back in
jake k. rulez
05-24-2008, 01:11 AM
i keep getting problem on this
it is line 80 error identifier expected in script (blablabla)
can u tell me why this is happening
just so u no i am a major noob and barely no anything about scar or srl
PhantomCode
05-24-2008, 01:13 AM
Maybe you could borrow a gas finder from someone else until you feel like coding your own? With their permission and credit of course.
I would make one but I'm still such a noob at SCAR coding!:redface:
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.