View Full Version : [SRL] AK Smelter
Pages :
1
2
3
4
5
[
6]
7
8
9
10
I'm using 'DeclarePlayers'
But then comes the forms.
how to put 'UseForm' false
Narcle
12-14-2011, 10:16 AM
I'm using 'DeclarePlayers'
But then comes the forms.
how to put 'UseForm' false
at top you should see
UseForm = True;
set it to
UseForm = False;
Next version this will be changed so that if you setup DeclarePlayers it will use it instead of Forms. (without having to set UseForm)
just found this
"{ATTENTION!
Forms To use just push the play NOT put anything in DeclarePlayers.
If you want to use DeclarePlayers fill it in (Forms Should NOT come up then)} "
dont Understand
I just want to use DeclarePlayers
but when used, appears forms
Narcle
12-14-2011, 10:31 AM
just found this
"{ATTENTION!
Forms To use just push the play NOT put anything in DeclarePlayers.
If you want to use DeclarePlayers fill it in (Forms Should NOT come up then)} "
dont Understand
I just want to use DeclarePlayers
but when used, appears forms
And forms are still appearing? That shouldn't happen.
Delete this part if it still shows forms (just leave one DeclarePlayers) :
if (Players[0].Name = '') then
begin
SafeInitForm;
if AKpf_SavePlayers then
SavePlayers(True);
if AKpf_Terminate then
TerminateScript;
end else
DeclarePlayers;
now understood
which line is?
'if (Players [0]. Name ='') then
begin
SafeInitForm;
then if AKpf_SavePlayers
SavePlayers (true);
then if AKpf_Terminate
TerminateScript;
end else
DeclarePlayers; '
sorry to bother! But found the line, I am Brazilian, I am bad in English ..
andyuk3
12-14-2011, 11:14 AM
can someone give me a link to a tutorial how to run these scrips and is it the MSI one? thanks
http://villavu.com/forum/showthread.php?p=860469&postcount=7
and http://villavu.com/forum/showthread.php?p=851555#post851555
[============================]
[ Narcle'S AK Smelter 1.5.5 ]
[ by Narcle ]
[============================]
[ Run Time : 27 Min 33 Sec ]
[ Total Bars : 180 ]
[ Crafted : 0 ]
[ Total XP : 3160 ]
[============================]
[ Narcle'S AK Smelter 1.5.5 ]
[============================]
[================================================== ===================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ Brun | True | 00:26:47 | 22 | 180 | 0 | 3160 | 7076 ]
[================================================== ===================]
nice script
andyuk3
12-14-2011, 11:48 AM
Ive done all that but you can only use the scripts that are in the box that opens??? How do i use this script with it?
andyuk3
12-14-2011, 11:56 AM
woop its working, thanks
Break for: 24m:13s
he will always break and come back?
'Runescape has been updated.'
You have no CRASHSMART enabled, so you can not reload RS. Sorry, bye!
Thanks for using my AK Smelter!
Please post proggies on forums!
-Narcle
Successfully executed.
dont understand
Fire Monkey
12-14-2011, 07:44 PM
'Runescape has been updated.'
You have no CRASHSMART enabled, so you can not reload RS. Sorry, bye!
Thanks for using my AK Smelter!
Please post proggies on forums!
-Narcle
Successfully executed.
dont understand
You have to reload RS every 6 hours - it's an update Jagex done to set back macroers. There's a fix which will close & re-open Simba when this happens, called CrashSmart. Read some threads & you'll understand.. you shouldn't really be posting about this in Narcle's Smelter thread.
Anyway, read this for more info: http://villavu.com/forum/showthread.php?t=67864&highlight=crashsmart
Also: Keep everything you say in the 1 post, there is an edit button :)
nfskid
12-14-2011, 11:32 PM
Ill run 10 bots and post the progs after 3 hours. Last night 7 out of 10 mis walked to random 3 spots.
townsy859
12-15-2011, 01:55 AM
I've been running this script for a few weeks now, and after one of the updates the bot can no longer recognize the furnace in Al-Kharid. I'm using him to smelt mithril on F2P. Any help?
dennisl400c
12-15-2011, 03:33 AM
has the edgeville walking been fix or any idea when it will be working good if u need an account to test it when u finish let me know
Narcle
12-15-2011, 08:18 AM
has the edgeville walking been fix or any idea when it will be working good if u need an account to test it when u finish let me know
Weekend, and an account to test will def bump up the time. I don't have an account that can use furnace there yet.
oudshoorn
12-15-2011, 06:59 PM
Weekend, and an account to test will def bump up the time. I don't have an account that can use furnace there yet.
WOW it is epic that you actually HAVE edgeville without an account to use it!!
Narcle
12-15-2011, 08:25 PM
WOW it is epic that you actually HAVE edgeville without an account to use it!!
:stirthepot: Its true too lol
nfskid
12-15-2011, 11:40 PM
Bots worked better last night all made +3 hours most ran out of supplies a few 3? made it for 5 + hours
Failedpure
12-16-2011, 02:01 AM
Very solid script. Does Ak cannonballs very good. The coal bag support is also very good.
[================================]
[ Narcle'S AK Smelter 1.5.5 ]
[================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ | True | 01:18:02 | 25 | 414 | 1656 | 17802 | 13687 ]
[================================================== ====================]
Press Play
12-16-2011, 11:52 AM
To Furnace...
BuildingOutline = 16116722 31ms
Antiban...
End Antiban.
Going to smelt...
tpa1 Length = 531 || tpa2 Length = 5015
Smelting Ore...
Making Cannonballs...
tpa1 Length = 543 || tpa2 Length = 5008
Smelting Done.
To Bank...
BuildingOutline = 16116722 31ms
Opening Bank...
Couldn't find position, **** is now inactive.
NextPlayer(False)
[===========================]
[ Narcle'S AK Smelter 1.5.5 ]
[ by Narcle ]
[===========================]
[ Run Time : 19 Min 3 Sec ]
[ Total Bars : 90 ]
[ Crafted : 360 ]
[ Total XP : 3870 ]
[===========================]
[ Narcle'S AK Smelter 1.5.5 ]
[===========================]
[================================================== ===================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ **** | True | 00:19:02 | 6 | 90 | 360 | 3870 | 12198 ]
[================================================== ===================]
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
All players not active!
Resting...
NextPlayer(True)
This happened... but when I re-started the script, it started working perfectly again? I didn't catch where it stopped though, sorry.
EDIT: ps: Edgeville! :)
Mailandes
12-17-2011, 05:51 AM
Tried doing Ores to Cannonballs at Edgeville, did the first load ores to steels bars to cannonballs, but never went to bank, just stood at the furnace.
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 62ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 62ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 47ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 62ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 32ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 32ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 31ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 62ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 63ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 31ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 31ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 63ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 63ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 78ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 78ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 0ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15461360 47ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 32ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 47ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 15ms
To Edge Bank failed.
To Bank...
BuildingOutline = 15461360 16ms
To Edge Bank failed.
^ Is what the console looked like.
Gonna try running this in AK now.
Same Problem with same settings at AK, it goes "AFK" at the furnace after finishing the cannonballs.
But at AK it didn't spam the console:
To Cactus...
To Furnace...
BuildingOutline = 15921146 15ms
PaceCheck: 46ms
Going to smelt...
Smelting Ore...
formWriteln: Item := TPAItem(66, 29, 22, 3750204);
Making Cannonballs...
Edit!!: While I was copying the code from the console it logged off of RS, it logged in again and went into the kebab store, now it's trying to find something at the kebab thing..
It just went to bank, successfully banked.. maybe next load works, but there's something wrong..
Next Load: It actually works now, after it logged off and logged back in, but it does Steel Bars only now, even though it's set to Ores > Cannonballs. The first load it did cannonballs, logged off, logged in, did steels only.. odd.
Edit2: Re-Started again and now works at AK bank, same settings.
If it works for longer I'll post a proggy.
Edit3: Started Edgeville again doing ores to Cannonballs and it works now.
Edit4:^ Crashed after just a few minutes, same bug as at the top, but this time at the bank.
Edit5:
Proggy, ores to cannonballs @ Al Karhid, works like a charm now :D
[=================================]
[ Narcle'S AK Smelter 1.5.5 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 03:55:50 | 76 | 1235 | 4940 | 53104 | 13510 ]
[================================================== ====================]
ziellos
12-18-2011, 12:54 AM
Let me know if you need access to an account that can do it in edge.
supersain
12-18-2011, 01:58 AM
Thanks again very nice script. I was able to smelt 50k gold bars and then crafted them in to sapphire bracelets. Flawless at Alkharid.
Narcle
12-18-2011, 05:25 AM
Update 1.5.6: 12-17-2011 - Released
-Many changes to walking in AK
-Tweaked Edgeville walking (unknown if it fixed it or not yet)
-Fixed Silver crafting (you'll see it in drop down menu now)
-Bunch of other changes I forgot (but it should run a bit faster now)
If there ends up being bad results at AK (I hope not worked well for me) I will probably revert walking changes.
Edit:
Silver won't work until you have SRL version 862+
Whatmatters
12-18-2011, 10:54 AM
http://img.photobucket.com/albums/v485/necagon/smither.png
1.6 still does this sometimes. Other times it's dead on when pathing to the banker. It actually goes one tile south of in that picture now.
Edit: I'm playing around with the coordinates again, but the matter of consistency makes it kind of difficult to know whether or not the alterations are having a good effect or not. It may or may not just be a lucky streak of good banks.
Edit2:
Line 1180
T := Point(B.x2-9, B.y1+11);
Kindaaaaa, sorta?, Eh... who knows? I'll watch it for like 3 more trips, and then I'm going to bed.
1 out of 11 trips hit the facepalm tile. I am certainly not watching a thousand trips for a more accurate testing pool (not at this time at least).
The building outline hasn't crashed on me yet. We'll see if I can get a full night of molding in.
Edit3: The furnace outline crashed again on the trip I was going to bed with :(. It recovered after a long series of seizure in the debug. I'll load in a proggy this afternoon/morning depending on when I wake up.
Narcle
12-18-2011, 04:30 PM
That's so weird. Even for me after I tested to bank it could still click the counter from there and make it inside just fine.
Test it more and let me know.
Whatmatters
12-18-2011, 08:00 PM
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[ by Narcle ]
[=================================]
[ Run Time : 4 Hr 27 Min 58 Sec ]
[ Total Bars : 0 ]
[ Crafted : 4760 ]
[ Total XP : 119000 ]
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[=================================]
[================================================== =====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== =====================]
[ Dark | True | 04:27:18 | 173 | 0 | 4760 | 119000 | 26711 ]
[================================================== =====================]
It's not that it can't click from the outside wall. More so, it's like the furnace walking gripe that I had. Flagging outside the bank is extremely rare by legits. Wanting to blend in is natural isn't it?
My char ended his run wanting to chop some yews apparently >.<..... His agility isn't high enough to jump regular walls yet.
Wich is better, if I smelt in Edgeville or Alkharid?
oudshoorn
12-18-2011, 09:19 PM
@key i believe alkharid as edge is having problems (i thought) but i suggest you try both and see for yourself
@narcle
can you help me out here? id like to set it to have breaks but not more than a few minutes but i do not know how long the bot breaks and how to change it
and can you explain to me what sleep time means???
thanks in advance
Fredecus
12-19-2011, 01:07 AM
I am also testing it atm, I will post a proggy soon =)
Narcle
12-19-2011, 01:32 AM
@Whatmatters
Should I make it just click near perfect inside bank every time then?
If you want to test in ToEdgeBank this line:
MouseFlagEx(T.x, T.y, 5, 5, 0, 0, 4, false, false);
Change bold and see. Try it at 1/2 or so.
99 Doors
12-19-2011, 04:39 AM
When I try to use a second profile it logs in with the first profile.
Press Play
12-19-2011, 05:55 AM
When I try to use a second profile it logs in with the first profile.
If you're entering 2 different accounts into the form, then it will use both accounts. If you only want to use each account separately, uncheck the 'active' option for your first character.
Whatmatters
12-19-2011, 06:13 AM
@Whatmatters
Should I make it just click near perfect inside bank every time then?
If you want to test in ToEdgeBank this line:
MouseFlagEx(T.x, T.y, 5, 5, 0, 0, 4, false, false);
Change bold and see. Try it at 1/2 or so.
I would think that's more reasonable than risking peculiar misses. Plenty of people hit near perfect or perfect smelting regularly.
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[ by Narcle ]
[=================================]
[ Run Time : 5 Hr 37 Min 55 Sec ]
[ Total Bars : 0 ]
[ Crafted : 6860 ]
[ Total XP : 171500 ]
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[=================================]
[================================================== =====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== =====================]
[ Dark | True | 05:37:01 | 247 | 0 | 6860 | 171500 | 30532 ]
[================================================== =====================]
I got a good session this run.
OConnor
12-19-2011, 06:26 AM
Great script Narcle, just downloaded your newest version and it's crafting silver bars into tiaras like a dream! Question tho, while watching it does it only do one at a time or is there an option in the script for it to select make all? using a tiara mould in my tool-belt if that makes a difference?
Cheers,
Press Play
12-19-2011, 06:30 AM
I would think that's more reasonable than risking peculiar misses. Plenty of people hit near perfect or perfect smelting regularly.
I would say that 'legit players' who miss-click, would re-click. People who hit perfect all the time usually hover their mouse over the location before they need to click. That could be a viable option Narcle?
Narcle
12-19-2011, 07:12 AM
I would say that 'legit players' who miss-click, would re-click. People who hit perfect all the time usually hover their mouse over the location before they need to click. That could be a viable option Narcle?
Ohhh I like that idea. Do like a zoning in jitter then click just right as well.
Wonder in how many ms it takes for a human to do it
99 Doors
12-19-2011, 04:00 PM
If you're entering 2 different accounts into the form, then it will use both accounts. If you only want to use each account separately, uncheck the 'active' option for your first character.
Thank you for the advice but just to clear things up, what exactly does "Active" do?
Press Play
12-19-2011, 04:10 PM
Thank you for the advice but just to clear things up, what exactly does "Active" do?
"Active" states whether the player is in use. If you're not using a certain character, it is not "active".
Also, if a character encounters a problem (eg. goes into a random and fails solving it), then the character is then not "active".
:)
99 Doors
12-19-2011, 04:27 PM
So the script tries to log into all active accounts in order and won't log into non-active accounts?
Surfster
12-20-2011, 05:37 AM
the walk in between al-karid furnace and bank is fairly slow, anyway to make the trip faster in between?
also the time between when the program uses the steel on the furnace and then clicks cannonballs is fairly slow.
but overall, i love it!
Press Play
12-20-2011, 10:14 AM
So the script tries to log into all active accounts in order and won't log into non-active accounts?
Exactly correct! :)
99 Doors
12-20-2011, 01:21 PM
That's cool and all but what happens if I'm trying to run the script on two accounts? This means after setting up the first account I'll have to uncheck Active for it to run the script on the second account. That means if my internet drops and comes back up, the first account won't log back in (because both instances will try to log into the second account).
Player 1 create string not setup correctly, please fix.
Please tell me what im doing wrong!
GenericUser
12-20-2011, 05:38 PM
[===============================]
[ Narcle'S AK Smelter 1.5.6 ]
[ by Narcle ]
[===============================]
[ Run Time : 6 Hr 8 Min 8 Sec ]
[ Total Bars : 1218 ]
[ Crafted : 0 ]
[ Total XP : 7569 ]
[===============================]
[ Narcle'S AK Smelter 1.5.6 ]
[===============================]
[================================================== ===================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ **** | True | 01:07:51 | 37 | 490 | 0 | 3045 | 2695 ]
[ **** | False | 00:52:22 | 29 | 210 | 0 | 1305 | 1497 ]
[ **** | True | 01:07:52 | 33 | 98 | 0 | 609 | 722 ]
[ **** | True | 01:07:51 | 10 | 70 | 0 | 435 | 385 ]
[ **** | True | 00:53:47 | 35 | 14 | 0 | 87 | 97 ]
[ ------------------------------------------------------------------- ]
[ **** | True | 00:54:19 | 37 | 336 | 0 | 2088 | 2310 ]
[================================================== ===================
For some reason, it does not detect how many bars I have actually smelted. The true number is higher than 1218.
Hoshikage
12-20-2011, 08:28 PM
The script sometimes has a problem in Al-Kharid where it would go behind the furnace with steel bars in your inventory instead of banking them, and ends up logging out.
Justin
12-20-2011, 09:04 PM
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[ by Narcle ]
[=================================]
[ Run Time : 4 Hr 38 Min 19 Sec ]
[ Total Bars : 0 ]
[ Crafted : 9520 ]
[ Total XP : 60690 ]
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[=================================]
Ran out of supplies
jordi1104
12-20-2011, 09:11 PM
That's cool and all but what happens if I'm trying to run the script on two accounts? This means after setting up the first account I'll have to uncheck Active for it to run the script on the second account. That means if my internet drops and comes back up, the first account won't log back in (because both instances will try to log into the second account).
Why would your internet drop you have a better chance that simba or the bot itself closes down after 6 hours then that ur internet drops.
On the other hand get better internet so you won't have a problem.
When internet drops both instances try logging in I believe and then if internet is still down shut down both and then when it comes back you will have to setup ur accounts again so it doesnt dual log in.
jalaluddin
12-20-2011, 09:24 PM
Got enough bars banked for 99 smithing , lets see where this script can get me :)
Does this script take breaks?
Matzo
12-21-2011, 02:57 AM
Does this script take breaks?
yes it does
Whatmatters
12-21-2011, 09:22 AM
I mostly use your script for edgeville, but that might just be because the Al Kharid side hates me.
Edgeville: It recovers on its own after like 10 cycles of antiban and camera reset, but the building outline still misses sometimes. I read a chat log of a bot hunter coming and asking if any were around. My name wasn't mentioned =P.
So far so good other than that.
Al-Kharid: I really don't know. This place really hates me.
I'm running it during one part of the day, and it's frequently clicking the back side of the building to the part where it runs behind the furnace. Now I'm running it, and it rarely runs to the tanning shop or cooking building.
Some runs are good, and some are off. I have no idea what changed, but for a while it was pre-clicking the gold bars for furnace usage. Usually it was nowhere close, so it would use it on another gold bar. That or something else occurring twice would cause it to do a 2x fail to smelt shutdown.
The flow of clicks can get really choppy since it's not always 1 click to and fro. It rests on the middle of the trip to the furnace. There's just so much more to worry about than edgeville.
I just shut it off now because it was running to the leather building ~1:3 trips. Maybe the latest update shook it. Maybe everyone else has it running perfectly. Maybe I'm just paranoid as ever. Probably a combination of those is the case.
Narcle
12-21-2011, 09:36 AM
Add this too DoChecks procedure:
r := Round(rs_GetCompassAngleDegrees*100.0);
if (not InRange(r, 0, 300)) or (not InRange(r, 35750, 36000)) then
ClickNorth(True);
Should fix Edgeville.
Yeah I'm still tweaking AK... More functions more problems =/
E:
Actually I think its their color changes that makes AK fail more. I had to update my autocolor for building outlines.
Nose Smasher
12-21-2011, 04:44 PM
The only 2 problems I found in AK is getting stuck behind furnace and behind bank... Not sure how im ending up behind these places, maybe too much randomness when clicking? Or could just be a fail due to lag... I'll look into it though - I need this script to be flawless again ;)
Narcle
12-21-2011, 05:22 PM
The only 2 problems I found in AK is getting stuck behind furnace and behind bank... Not sure how im ending up behind these places, maybe too much randomness when clicking? Or could just be a fail due to lag... I'll look into it though - I need this script to be flawless again ;)
Next version is tweaked out pretty damn good. Some minor changes and things I mentioned above fix that problem. (its almost too good >.< )
thexawesomex
12-21-2011, 05:37 PM
Exception in Script: Unable to find file 'srl/srl/misc/Smart.scar' used from ''
Yea im a noob can you help?
jalaluddin
12-21-2011, 08:23 PM
Exception in Script: Unable to find file 'srl/srl/misc/Smart.scar' used from ''
Yea im a noob can you help?
Read the different guides on the forum how to setup simba , its easy
@Narcle
Cant wait for a update,
Atm it doesnt run longer then 20 min ,
Everytime i come back ,its logged out :P
Surfster
12-22-2011, 04:24 AM
heres a proggie for your collection! It would have run more, just ran into a random, i was doing cannonballs
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[ by Narcle ]
[=================================]
[ Run Time : 6 Hr 20 Min 45 Sec ]
[ Total Bars : 0 ]
[ Crafted : 11652 ]
[ Total XP : 74282 ]
[=================================]
[ Narcle'S AK Smelter 1.5.6 ]
[=================================]
Bixby Sayz
12-22-2011, 07:30 PM
Just gave this a go. Withdrew ores, walked to furnace, immediately walked back to bank, banked and withdraw, walked to furnace, then immediately walked over by the palace?
Stopped the script at that point.
redeclipse
12-22-2011, 08:33 PM
Just gave this a go. Withdrew ores, walked to furnace, immediately walked back to bank, banked and withdraw, walked to furnace, then immediately walked over by the palace?
Stopped the script at that point.
Same error for me. But what I did was go to Al-Kharid and it's running for almost 2 hours now and is currently on break.
Surfster
12-22-2011, 08:54 PM
update soon?
Bixby Sayz
12-22-2011, 09:17 PM
Same error for me. But what I did was go to Al-Kharid and it's running for almost 2 hours now and is currently on break.Actually I was in Al-Kharid. Rebooted this machine since then and now it's working fine, so must have been something wonky on my end.
redeclipse
12-23-2011, 12:15 AM
Actually I was in Al-Kharid. Rebooted this machine since then and now it's working fine, so must have been something wonky on my end.
Oh, so Edgeville is working for you now? If so, I ought to try restarting too!
Yanhua
12-23-2011, 12:17 AM
This script works great at Al Kharid. Great work Narcle!
jayanth
12-23-2011, 01:29 PM
This script is superbly awesome at alkharid thx Narcle!!!! :spot:
Narcle
12-23-2011, 01:36 PM
Thx guys.
Been focusing on Edgeville now that I have a account that can use it there. Keep running into weird bugs so I hope to have it figured out by Christmas. (hardly doing anything else heh)
t0b1as
12-23-2011, 01:52 PM
Thanks for the awesome script !
OwainJones
12-23-2011, 06:28 PM
Really like this script, unfortunately I can only get simba to work on my laptop. Is there a way to automatically set it up so that if a player is logged in, switch to next player in list? That would be a beautiful loop and ensure that bots stay up for longer.
Say you have 5 smithing bots, you would just press play for each without caring. It would set them up in order, and if one was already logged on (say on another bot list) It would swap to the next.
Also how do I setup more than one bot without wrecking the code? I have it set to current player = 1, but it keeps trying to log in player 0...?
procedure DeclarePlayers;
begin
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 1;
stats_Username := '';//SRL Stats, stats.villavu.com
stats_UserPass := '';//
With Players[1] do
what am I doing wrong?
redeclipse
12-23-2011, 07:09 PM
You're not doing anything wrong, 0 is the first player. Then if you want to add more players you just copy the code for setting up an account, I believe it is the code that asks for username, password and pin. Then you just increase the HowManyPlayers to however many characters you want it to switch between.
Please let me know if this helped, I'm still trying to learn this scripting, I hope to make a script soon and become one of those l33t SRL Members!
OwainJones
12-23-2011, 07:57 PM
I want to run more than one account at the same time. Meaning more than one client. It keeps starting on the first account though..?
redeclipse
12-23-2011, 08:11 PM
I want to run more than one account at the same time. Meaning more than one client. It keeps starting on the first account though..?
I don't believe you can do more than one account if that is what you are aiming for.
Unless...you have separate scripts for each account with the different account information for each account. This isn't really like those other bots that you can run a huge bot farm with it.
Fire Monkey
12-23-2011, 08:15 PM
Narcle you're a genius... loving how it now picks up where it left off :)
OwainJones
12-23-2011, 08:18 PM
I don't believe you can do more than one account if that is what you are aiming for.
Unless...you have separate scripts for each account with the different account information for each account. This isn't really like those other bots that you can run a huge bot farm with it.
Oh I'll make it work one way or another. Hopefully it won't be with VMs because that's a lot of setup time and I'll only be able to run like 20 copies :sasmokin:
OwainJones
12-23-2011, 08:30 PM
hehe got it to work :3
OwainJones
12-23-2011, 09:30 PM
Both of my bots got stuck in antiban loops. Are there debug reports somewhere? Ima run without antiban or breaks anyway.
Narcle
12-23-2011, 09:34 PM
Stop multi posting or I'll start giving you infractions.
If you want to remove the antibans and breaks you can remove them by just learning some scripting. I even have a setup to disable breaks....
Also running 5 bots at same time? Goldfarming?
OwainJones
12-24-2011, 03:16 AM
Sorry I was just having a hell of a time getting the bots running as I put the msv file into 32 bit for my 64 bit server /facepalm.
5 bots was an example. I hope my 16 core runs a few more than that.
Koliantrix
12-24-2011, 05:30 AM
i noticed you have a suggestion list, could i suggest neitizinot smelting? the furnace can be seen from the bank(would not have to run anywhere, just exit bank use item on furnace = GG.
obviously you're very busy trying to get edgeville working, i just thought i would post for you to keep in mind if you plan to continue developing this bot.
jayanth
12-24-2011, 05:32 AM
the v1.5.6 is not running correctly its going to furnace and coming to bank again without smelting in ak, only sometimes its smelting so pls update it.
Narcle
12-24-2011, 12:34 PM
Update 1.5.7: 12-24-2011 - Released
-Autocolor updated (this was the biggest thing stopping the walking)
-Edgeville tweaked, you should see much longer runs
-Minor additions to keep it going
dr kickassss
12-24-2011, 02:39 PM
Can someone please tell me which at which lines will I have to enter my stats_user and stats_pass. And also which line will have have to edit to smith cannonballs.
redeclipse
12-24-2011, 02:42 PM
Can someone please tell me which at which lines will I have to enter my stats_user and stats_pass. And also which line will have have to edit to smith cannonballs.
Though it is not at its usual lines I added right after the begin for DeclarePlayers (45 & 46). That might work, because he might have forgotten or whatever the reason :D
dr kickassss
12-24-2011, 02:49 PM
I have entered my runescape user and pass at lines 46 and 47 of the latest version.
procedure DeclarePlayers;
begin
With Players[0] do
begin
Name := 'd'; //Character Name
Pass := ''; //Character Pass
Active := true; //Use player in script?
But then I run it , It asks me to set stats_user and stats_pass and the script stop. Im not sure where I should enter them.
EDIT Nevermind got it working. shouldnt have changed the codes :P
OwainJones
12-24-2011, 04:35 PM
My bots keep standing around SE of the stove. Like stand still until 100% energy, and still not move. Any idea how to fix it? Has happened to 3 accounts so far, restarting bot instantly fixes, but they'll loop constantly until that's done....
formwritenin: To bank....
formwritenin: buildingoutline = 15266027 ping time (usually 15-20ms)
and repeats that over, and over, and over.
Also, is there a way to sort tabs differently? Like have all the smart files under one tab, .exe under another, and simba under another?
Crafting is crashing after a couple hundred gold bars. Keeps "failing to smelt" and so it logs. To fix go to line 1476 and change if (FailToSmelt > 2) to a larger interger. Might cause some looping problems that won't log you out though. This is mainly a problem with new accounts with low crafting/smithing levels. Regardless I can't get crafting over 6k/hr on gold necklaces, which just isn't right. Shouldn't make more steel bars than I smelt gold bars.
With the exception of a couple bots which have been freezing at the "cactus" location and looping antiban, I have multiple proggies similar to this. Crafting could be smoother, it keeps clicking bars and using on furnace while it's smelting.
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 5 Hr 23 Min 56 Sec ]
[ Total Bars : 1665 ]
[ Crafted : 0 ]
[ Total XP : 29230 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Socc | True | 05:22:37 | 187 | 1665 | 0 | 29230 | 5436 ]
[================================================== ====================]
steel bars
Thank you for the script
killakingbk
12-25-2011, 01:03 AM
thanks alot great script .. just pauses near bank sometimes.. so u gotta look over it evry 50minutes or so
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 3 Hr 25 Min 50 Sec ]
[ Total Bars : 0 ]
[ Crafted : 5516 ]
[ Total XP : 35164 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Bkk_ | True | 03:23:37 | 55 | 0 | 5516 | 35164 | 10361 ]
[================================================== ====================]
TwoClover
12-25-2011, 01:26 AM
O.K. the new update is working great. Edgeville is the bomb right now. Some problems with AlKharid with debugging finding the bank, most of the time, rarely is it hard to find the smithing building. Edgeville did that to me once, finding bank, but works much much better than AK. I think you can take Edgeville off of Beta testing IMO. Thanks for the great script.
P.S. the only reason i had trouble in edgeville was because my computer was lagging very badly when i was testing.
pwning
12-25-2011, 03:48 AM
just saw this thought you would like to see it http://screensnapr.com/v/lOllHr.png
great script btw
jalaluddin
12-25-2011, 12:08 PM
thx for the update :D , script is running smooth and stable
Edit:
Does someone know how to add code to it so it changes world after a certain amount of time?,
Or @Narcle could you add this feature to the script
ziellos
12-26-2011, 05:42 AM
Often it will click exactly on the furnace which will result in it running behind the building, it also often sits inbetween bank and furnace for about 5 minutes trying to find building outline.
Going to let them run a bit longer then attempt fixing. Oh, I assume that's your new antiban measure?
Narcle
12-26-2011, 05:50 AM
Often it will click exactly on the furnace which will result in it running behind the building, it also often sits inbetween bank and furnace for about 5 minutes trying to find building outline.
Going to let them run a bit longer then attempt fixing. Oh, I assume that's your new antiban measure?
You can check this by watching the Debug box, should say whats its doing. (i think i added it?) Been working on fighter as I thought this script was fairly set. :)
ziellos
12-26-2011, 06:11 AM
You can check this by watching the Debug box, should say whats its doing. (i think i added it?) Been working on fighter as I thought this script was fairly set. :)
End Antiban.
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
Antiban...
End Antiban.To Cactus...
Pretty much that for 5 minutes, so I guess I'll try disabling antiban.
Narcle
12-26-2011, 06:20 AM
End Antiban.
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 31ms
To Bank...
BuildingOutline = 15527915 15ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 15ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 32ms
To Bank...
BuildingOutline = 15527915 16ms
To Bank...
BuildingOutline = 15527915 16ms
Antiban...
End Antiban.To Cactus...
Pretty much that for 5 minutes, so I guess I'll try disabling antiban.
No it is failing to get there. Get me a screen shot next time could u? Make sure its .png or .bmp :) Also edit your post and put that in [CODE] tags plz, pain to scroll way down. xD
ziellos
12-26-2011, 06:25 AM
Picture attached, let me know if you need it uploaded instead and unedited.
Sent you a MSG of it happening again unedited.
Narcle
12-26-2011, 03:38 PM
Picture attached, let me know if you need it uploaded instead and unedited.
Sent you a MSG of it happening again unedited.
Thank you that's really helpful, I can actually edit it to use right. I'll look at it tonight.
OwainJones
12-26-2011, 07:30 PM
Sweet thank you :) scripts flawless other than that. It usually recovers as is, but slows things down a bit. It also happens behind the furnace sometimes. It also spends like 20 seconds before withdrawing coal sometimes. Is jagex fucking with coal appearance? because I know I also have problems with RiDs' superheater.
Also you typed 'steel bars' in the string, but the strings supposed to be 'steel' :p
TwoClover
12-26-2011, 11:07 PM
Picture attached, let me know if you need it uploaded instead and unedited.
Sent you a MSG of it happening again unedited.
Yup thats what happened to me in AK. Switched to Edgeville and it does run flawlessly IMO. Ran it for 4 and a half hour last night while i took a nap. I woke up and it was still running. Shut it done though, don't wanna bot too long. Im going again now and I'm at 3 hours and 10mins. Making cannonballs from ores. It has went back to the bank twice before finishing making cannonballs from the steels bars. Have 15 bars but thats no sweat. Thanks for this awesome script. Neitiznot would make a wonderful edition to the script. I'd say get rid of AK keep Edgeville and add Neitiznot. Would be sooooo much faster and helpful. C'mon guys the quest is easy!
oligofren
12-27-2011, 03:18 PM
great script working well, only one problem - it has difficulty finding building outline
if you pause the script and move your character 1 tile and unpause it will find instantly - probably bad location, my suggestion for this is if it failed to find building outline few times - click on random neighboring tile and try searching building outline again, and if it continued failing after moving few times make it log out
kingob
12-27-2011, 03:26 PM
=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 3 Hr 35 Min 31 Sec ]
[ Total Bars : 1260 ]
[ Crafted : 5040 ]
[ Total XP : 54180 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 03:34:55 | 71 | 1260 | 5040 | 54180 | 15125 ]
Thanks so much Narcle I have been using this and your fighter for the last few weeks and they are flawless, especially the smelter in Edgeville :) thanks
chilisrockin
12-27-2011, 05:15 PM
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Chil | True | 06:00:06 | 107 | 0 | 11872 | 75684 | 12610 ]
[================================================== ====================]
kRATOS Kill9
12-27-2011, 06:16 PM
I love you man !!!! Great script
kingob
12-27-2011, 06:52 PM
[================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[================================]
[ Run Time : 7 Hr 9 Min 25 Sec ]
[ Total Bars : 2462 ]
[ Crafted : 9848 ]
[ Total XP : 105866 ]
[================================]
[ Narcle'S AK Smelter 1.5.7 ]
[================================]
[================================================== =====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== =====================]
[ **** | True | 07:08:48 | 139 | 2462 | 9848 | 105866 | 14813 ]
[================================================== =====================]
And its still going haha as I said flawless :) thanks.
oudshoorn
12-27-2011, 09:13 PM
@Narcle
Can you help me out?
Can you tell me how long the bot breaks (if activated) and how to change that??
Can you also please explain to me what sleep time means?
TwoClover
12-27-2011, 11:51 PM
How do i get smart to restart. only lets me go for 6 hours. I saw it somewhere once but idk what the Post title was called. It crashes smart and restarts simba to go more than 6 hours. would be very helpful as this script is amazing. GO EDGEVILLE!
Press Play
12-28-2011, 09:49 AM
How do i get smart to restart. only lets me go for 6 hours. I saw it somewhere once but idk what the Post title was called. It crashes smart and restarts simba to go more than 6 hours. would be very helpful as this script is amazing. GO EDGEVILLE!
Try searching "CRASHSMART". I'll try find the link if I can :)
EDIT: http://villavu.com/forum/showthread.php?t=67864
Narcle
12-28-2011, 10:02 AM
So I figured out AK problem, and have been tweaking SRL a lot recently. You'll see a major speed increase in next version. Not sure if I'll wait for SRL5 release (as that's what I'm testing it on) or modify to work with SRL4 before SRL5 release.
shj1m1n4t0r
12-28-2011, 06:39 PM
can any 1 tell me how to setup 1 account for cannonballs ? mine just banked the cannonball mould :S
ziellos
12-28-2011, 08:07 PM
So I figured out AK problem, and have been tweaking SRL a lot recently. You'll see a major speed increase in next version. Not sure if I'll wait for SRL5 release (as that's what I'm testing it on) or modify to work with SRL4 before SRL5 release.
I think you should go ahead and release the SRL5 version and provide a link for where to update to SRL5 (or I'll provide) :) No need to tweak it, everyone can manually update if they want to use it. It's simple and they'll need to do it eventually, plus it mite stop some of the gold farm abuse and the noobs who have no desire to learn.
Hakala
12-28-2011, 08:18 PM
can any 1 tell me how to setup 1 account for cannonballs ? mine just banked the cannonball mould :S
http://runescape.wikia.com/wiki/Toolbelt
TwoClover
12-28-2011, 11:20 PM
Try searching "CRASHSMART". I'll try find the link if I can :)
EDIT: http://villavu.com/forum/showthread.php?t=67864
Ha thanks man. As I had said I forgot what it was called, CRASHSMART, but now you mentioned what it is i remember that is it. Thanks for the link as well. :)
oudshoorn
12-29-2011, 12:02 AM
hey narcle i found this problem
it is just spamming
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 0ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 31ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 0ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
while doing nothing for probably 20 seconds so i hope you can fix this
i also hope you can help me out here as i got some questions
can you tell me how long the bot breaks (if activated) and how to change that??
can you also please explain to me what sleep time means?
Narcle
12-29-2011, 12:34 AM
@oudshoorn
1. AK to bank is broken atm
2. Procedure ResetTimer has the times
3. What time do u go to bed? (in military time)
oligofren
12-29-2011, 01:25 AM
hey narcle i found this problem
it is just spamming
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 0ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 31ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 0ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 15ms
To Bank...
BuildingOutline = 15856115 16ms
To Bank...
BuildingOutline = 15856115 16ms
while doing nothing for probably 20 seconds so i hope you can fix this
i also hope you can help me out here as i got some questions
can you tell me how long the bot breaks (if activated) and how to change that??
can you also please explain to me what sleep time means?
try changing tolerance from 0 to 10 in line 996
FindColorsSpiralTolerance(MMCX, MMCY, TPA2, BuildingOutline, MMX1, B.Y1+9, B.X1, MMY2, 0);
also you might change range for ATPA2 := SplitTPAEx(TPA2, 15, 10); I would suggest ATPA2 := SplitTPAEx(TPA2, 15, 5);
the problem is that it frequently gets ATPA2 length of 1 and exits the function ToAKBank, the script then checks location and calls ToAKBank again and it loops until it gets ATPA2 length equal to 2 or more
great script! works very well!
here's a proggy, i stopped it manually after one and half hours
[ Run Time : 1 Hr 36 Min 30 Sec ]
[ Total Bars : 1232 ]
[ Crafted : 0 ]
[ Total XP : 16896 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[****** | True | 01:36:17 | 47 | 1232 | 0 | 16896 | 10528 ]
logical
12-29-2011, 02:47 AM
[================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[================================]
[ Run Time : 1 Hr 7 Min 27 Sec ]
[ Total Bars : 0 ]
[ Crafted : 2240 ]
[ Total XP : 14280 ]
[================================]
[ Narcle'S AK Smelter 1.5.7 ]
[================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 01:07:22 | 20 | 0 | 2240 | 14280 | 12716 ]
[================================================== ====================]
<3
^.^
Narcle
12-29-2011, 11:35 AM
try changing tolerance from 0 to 10 in line 996
FindColorsSpiralTolerance(MMCX, MMCY, TPA2, BuildingOutline, MMX1, B.Y1+9, B.X1, MMY2, 0);
also you might change range for ATPA2 := SplitTPAEx(TPA2, 15, 10); I would suggest ATPA2 := SplitTPAEx(TPA2, 15, 5);
the problem is that it frequently gets ATPA2 length of 1 and exits the function ToAKBank, the script then checks location and calls ToAKBank again and it loops until it gets ATPA2 length equal to 2 or more
great script! works very well!
here's a proggy, i stopped it manually after one and half hours
[ Run Time : 1 Hr 36 Min 30 Sec ]
[ Total Bars : 1232 ]
[ Crafted : 0 ]
[ Total XP : 16896 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[****** | True | 01:36:17 | 47 | 1232 | 0 | 16896 | 10528 ]
Zomg, someone that knows something!
I recommend not changing the tolerance to 10, it'll get Player dots by mistake sometimes. I wouldn't change the split, they are high numbers so that if the bank symbol is over the line it'll catch that and still put the building in one ATPA.
But you are correct that it is the Length of ATPA. Really you just have to change that part.
loser69
12-29-2011, 01:20 PM
thanks for this script using curerently for c balls!
jordi1104
12-29-2011, 03:08 PM
Zomg, someone that knows something!
I recommend not changing the tolerance to 10, it'll get Player dots by mistake sometimes. I wouldn't change the split, they are high numbers so that if the bank symbol is over the line it'll catch that and still put the building in one ATPA.
But you are correct that it is the Length of ATPA. Really you just have to change that part.
It's a quik fix but it still fails alot while banking so if you can update it somehow soon that would be nice.
Failedpure
12-29-2011, 03:27 PM
As always nice script. Stopped do to rs updating [=================================]
[ Narcle'S AK Smelter 1.5.5 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Love | True | 05:59:04 | 90 | 1585 | 6340 | 68156 | 11388 ]
[================================================== ====================]
oligofren
12-29-2011, 04:21 PM
I am trying to read about these functions and structure of TP arrays, I do not understand enough yet beyond that they are working
ok, let's not afraid if ATPA length 1 and change
if Length(ATPA2) < 2 then
Exit;
SetArrayLength(ATPA2, 2);
SortATPAFromFirstPoint(ATPA2, Point(B.x1-16, MMY2));
to
if Length(ATPA2) > = 2 then
begin
SetArrayLength(ATPA2, 2);
SortATPAFromFirstPoint(ATPA2, Point(B.x1-16, MMY2));
end;
but still then why do we first set length then do sorting?
loser69
12-29-2011, 09:47 PM
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Sunb | True | 06:21:58 | 80 | 0 | 8288 | 52836 | 8299 ]
[================================================== ====================]
***** STR: 'Leo The Gravedigger' RANDOM SOLVING FAILED! *****
Giant Panda
12-30-2011, 12:15 AM
[===========================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[===========================]
[ Run Time : 44 Min 6 Sec ]
[ Total Bars : 207 ]
[ Crafted : 828 ]
[ Total XP : 8924 ]
[===========================]
[ Narcle'S AK Smelter 1.5.7 ]
[===========================]
[================================================== ===================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ **** | True | 00:43:15 | 25 | 207 | 828 | 8924 | 12377 ]
[================================================== ===================]
jestersmurF
12-30-2011, 12:38 AM
Narcle, I'm having problems starting it up. I hit the play button, I did not change any words in the script, then like 2 or 3 minutes later the form opens. I fill out the form and when I hit "Okay" it just stops the script. I've tried a lot of times but it won't open. :(
jestersmurF
12-30-2011, 12:47 AM
Save and Start.
Player count = 4
WithDrawMain: 28
WithDrawSeco: -1
WithDrawMain: 28
WithDrawSeco: -1
Player 2 has no name, making inactive for now.
Error: Type Mismatch at line 1798
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]
This is what I'm getting at. It says "Typing mismatch at line 1798"
anticampr
12-30-2011, 04:49 AM
What am i doing wrong?
Compiled successfully in 5766 ms.
SMART & SRL Loading...
SRL Compiled in 47 msec
SMART Initialized.
Loaded: Server 1, Members: True, Signed: True, Super Detail: False.
Start.
Player count = 1
Player 0 has no name, making inactive for now.
Error: Type Mismatch at line 1798
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]
anticampr
12-30-2011, 05:08 AM
Never mind my last post, i fixed that, but now i am getting this, after it does player setup it just stops
Compiled successfully in 4985 ms.
SMART & SRL Loading...
SRL Compiled in 47 msec
SMART Initialized.
Loaded: Server 1, Members: True, Signed: True, Super Detail: False.
Start.
Player count = 1
WithDrawMain: 9
WithDrawSeco: 18
AK Smelter v1.5.7
By Narcle
Runescape Loading...
Logging in...
Player setup...
Size: 431 Height: 96
Near Bank
Thanks for using my AK Smelter!
Please post proggies on forums!
-Narcle
Successfully executed.
Sorry to be so annoying I am a bit new to these scripts and coding in general
Hakala
12-30-2011, 08:16 AM
Works quite nicely, but if you start in edge furnace, it wont run to bank.
I've set my user multiple times because it seems to randomly log out every now and then at the furnace.
:3 I'm pretty sure you're aware of this 'problem', but it would be nice if it would run to bank if started at furnace :)
Giant Panda
12-30-2011, 09:22 AM
Ran out of primary, ******* is now inactive.
NextPlayer(False)
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 1 Hr 53 Min 21 Sec ]
[ Total Bars : 569 ]
[ Crafted : 2276 ]
[ Total XP : 24530 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 01:52:35 | 65 | 569 | 2276 | 24530 | 13073 ]
[================================================== ====================]
Tuning1st
01-01-2012, 12:29 AM
Im just testing F2P and good for a newbie account
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 1 Hr 54 Min 16 Sec ]
[ Total Bars : 1062 ]
[ Crafted : 0 ]
[ Total XP : 13279 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ XXXX | True | 01:53:57 | 49 | 1062 | 0 | 13279 | 6992 ]
[================================================== ====================]
Break for: 12m:33s
Iron bars
Elitezer0
01-01-2012, 05:04 AM
Damn everyones seems to work fine.. Mine stops alot for like 5 or 10 minutes at a time. Sometimes logs out, I'll make a proggy soon
jayanth
01-01-2012, 01:56 PM
nice script but taking much time to go to bank if the bank is not fully visible in the minimap pls fix it,than it everything is superb!!!
i think taking over 2-3 mins to find the bank and sometimes it cannot find the bank so pls pls fix it.
lord onon
01-01-2012, 02:13 PM
cool script but cant find the bank many times .please bro update it.thanks for your efforts
jordi1104
01-01-2012, 02:53 PM
I left it on while I was afk all was good until 2 hours of running then it went into a random wich it coulden't detect that's not so much of a problem but it kept walking to bank while into a random for 4 hours straight proggy is too long to post it tried walking to bank over 1000 times.
ClasicPKname
01-02-2012, 01:18 AM
It works but it takes forever to run back to the bank. like it stands there for a few solid seconds sometimes. I had a small job of around 300 bars and this program worked for me.
[============================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[============================]
[ Run Time : 21 Min 55 Sec ]
[ Total Bars : 308 ]
[ Crafted : 0 ]
[ Total XP : 6930 ]
[============================]
[ Narcle'S AK Smelter 1.5.7 ]
[============================]
[================================================== ===================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ Xkma | True | 00:21:51 | 12 | 308 | 0 | 6930 | 19028 ]
[================================================== ===================]
wardy1100
01-02-2012, 02:29 AM
Ran out of primary, ******* is now inactive.
NextPlayer(False)
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 1 Hr 53 Min 21 Sec ]
[ Total Bars : 569 ]
[ Crafted : 2276 ]
[ Total XP : 24530 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 01:52:35 | 65 | 569 | 2276 | 24530 | 13073 ]
[================================================== ====================]
yeah i get the same problem but mine doesnt even run more than 10 seconds
oo nevermind fixed it
stuffs
01-02-2012, 03:32 AM
http://i.imgur.com/1KOh8.png
Gets stuck in this spot at Al Kharid, Edge is working flawlessly though.
Gimpy666
01-02-2012, 04:15 AM
http://i.imgur.com/1KOh8.png
Gets stuck in this spot at Al Kharid, Edge is working flawlessly though.
This happens to me as well.
MaxPayne619
01-02-2012, 05:21 AM
This happens to me as well.
Just Disable smart walk out of that area ( to bank or smith place) enable smart and let it run. it will work perfect then (but the bug will still exist) it will keep on saying building outline etc.
anyways my longest Run with this script :) :):
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[=================================]
[ Run Time : 4 Hr 55 Min 40 Sec ]
[ Total Bars : 3388 ]
[ Crafted : 0 ]
[ Total XP : 46464 ]
[=================================]
[ Narcle'S AK Smelter 1.5.7 ]
[=================================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Help | True | 04:52:59 | 124 | 3388 | 0 | 46464 | 9515 ]
[================================================== ====================]
pizzapolice
01-02-2012, 07:30 AM
Your script is awesome! However i get stuck at the part stuffs mentioned sometimes and it just says something about building outlines. Also sometimes the smelter walks halfway there says done smelting then walks back and deposits the ores :( Other than that its awesome!
LemonHaze
01-02-2012, 09:56 AM
very nice script!
Mar-TINO
01-02-2012, 07:42 PM
[============================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[============================]
[ Run Time : 53 Min 53 Sec ]
[ Total Bars : 0 ]
[ Crafted : 1680 ]
[ Total XP : 10710 ]
[============================]
[ Narcle'S AK Smelter 1.5.7 ]
[============================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ hmmm | False | 00:53:50 | 16 | 0 | 1680 | 10710 | 11935 ]
[================================================== ====================]
Thanks Narcle
Jhangir
01-03-2012, 02:17 AM
Gets stuck here.
http://img692.imageshack.us/img692/8636/stuckn.jpg (http://imageshack.us/photo/my-images/692/stuckn.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
Debug box says this:
To Bank...
BuildingOutline = 16315883 32ms
To Bank...
BuildingOutline = 16315883 16ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 16315883 31ms
To Bank...
BuildingOutline = 16315883 31ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 16ms
Antiban...
End Antiban.
To Bank...
BuildingOutline = 16315883 31ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 32ms
To Bank...
BuildingOutline = 16315883 15ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 15ms
To Bank...
BuildingOutline = 16315883 15ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 15ms
To Bank...
BuildingOutline = 16315883 31ms
To Bank...
BuildingOutline = 16315883 15ms
To Bank...
BuildingOutline = 16315883 16ms
To Bank...
BuildingOutline = 16315883 15ms
To Bank...
BuildingOutline = 16315883 31ms
To Bank...
BuildingOutline = 16315883 16ms
ClasicPKname
01-03-2012, 04:43 AM
Did 29120 cannonballs at Al Kharid today, here's one of my proggies. (I had to restart it a couple times)
[===============================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[===============================]
[ Run Time : 2 Hr 4 Min 1 Sec ]
[ Total Bars : 0 ]
[ Crafted : 3492 ]
[ Total XP : 22261 ]
[===============================]
[ Narcle'S AK Smelter 1.5.7 ]
[===============================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Kenn | True | 02:02:25 | 33 | 0 | 3492 | 22261 | 10910 ]
[================================================== ====================]
Thanks a lot for the script it's working great!
Shady89
01-03-2012, 06:44 PM
not a bad script but its runs VERY slow , i worked out its abit 120k an hour. the super heat script runs fast and gets magic exp and gets 100k an hour without a coal bag.
would be a good script if worked faster between actions but for now ill stick to super heat.
ziellos
01-04-2012, 05:22 AM
not a bad script but its runs VERY slow , i worked out its abit 120k an hour. the super heat script runs fast and gets magic exp and gets 100k an hour without a coal bag.
would be a good script if worked faster between actions but for now ill stick to super heat.
Maybe for you.. I make like 6m a day. It's been 300k + an hr for me for the past 2 months.
fergieman92
01-04-2012, 06:49 AM
I'm running into a problem, i have to keep restarting my script every 1-2 hours. it just randomly logs out, but each time the issue is different regarding why it is logging out. i know its my first post but here is the log on what it is saying. *note everything is set up corrrectly*
To Furnace...
BuildingOutline = 15137260 16ms
Going to smelt...
tpa1 Length = 264 || tpa2 Length = 4924
Smelting Ore...
Item wasn't detected attempting a TPA update.
** Warning in InvBox: Incorrect index: 30**
Warning! You passed a wrong xs to a finder function: -1. That is below 0, thus out of bounds. Setting the value to 0 for now.
Warning! You passed a wrong ys to a finder function: -1. That is below 0, thus out of bounds. Setting the value to 0 for now.
Smelting Done.
To Bank...
BuildingOutline = 15137260 15ms
Opening Bank...
Failed to smelt 2+ times, ***** is now inactive.
NextPlayer(False)
[===========================]
[ Narcle'S AK Smelter 1.5.7 ]
[ by Narcle ]
[===========================]
[ Run Time : 1 Hr 23 Sec ]
[ Total Bars : 986 ]
[ Crafted : 0 ]
[ Total XP : 22185 ]
[===========================]
[ Narcle'S AK Smelter 1.5.7 ]
[===========================]
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 00:59:24 | 39 | 986 | 0 | 22185 | 22408 ]
[ **** | False | 00:00:11 | 0 | 0 | 0 | 0 | 0 ]
[================================================== ====================]
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
All players not active!
NextPlayer(True)
I have 2 players set up the same because sometimes it will randomly log out and switch to the next player but this time when it says "Switchtoplayer" 0, thats the player i was using when it just said he was not active but attempts anyway. just a log for narcle to look at.
Thanks for reading
lord onon
01-04-2012, 04:02 PM
please bro they put new item (empty your maney pouch) in the place of (empty your inventory) how could i fix this ???
Shady89
01-04-2012, 05:27 PM
please bro they put new item (empty your maney pouch) in the place of (empty your inventory) how could i fix this ???
http://villavu.com/forum/showthread.php?t=71061
lostprophetsown
01-04-2012, 07:27 PM
Here's a tutorial on how to get the bot working after the bank update :)
http://villavu.com/forum/showthread.php?p=881856#post881856
Narcle
01-04-2012, 07:56 PM
Here's a tutorial on how to get the bot working after the bank update :)
http://villavu.com/forum/showthread.php?p=881856#post881856
Do this or get SRL5 or wait for SRL5 to be pushed to auto updater.
nanana
01-04-2012, 10:17 PM
can you fix the ak bank would be cool of u
oudshoorn
01-04-2012, 10:18 PM
i have a suggestion which probably has been said before
maybe you could add neitiznot as the bank and furnace are really close to eachother.
i wont be using it (dont got the quest) but it would be a great addition to your great script
ClasicPKname
01-05-2012, 01:10 AM
Seems as thought it's stopped banking at edgeville. :S
Narcle
01-05-2012, 01:14 AM
Beware OLD version will break on SRL5 update.
I'll get new one out soon.
ClasicPKname
01-05-2012, 01:38 AM
Thanks Narcle :D
aro san
01-05-2012, 02:47 AM
How come when I run the script it goes perfectly fine until it gets to EXACTLY 90 bars then logs out. I'm smelting steel bars in Al-Kharid and I have the ores in the first 2 bank slots.
ClasicPKname
01-05-2012, 04:38 AM
Beware OLD version will break on SRL5 update.
I'll get new one out soon.
read
Biologically
01-05-2012, 06:10 PM
Keep getting this error:
Error: Type Mismatch at line 1798
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]
Line 1798 is: For i := 0 to HowManyPlayers - 1 do
Biologically
01-05-2012, 06:30 PM
Never mind, that ^ only happens when you use GUI. But, you probably already know this, the bank deposit no longer works, because of the update for adding the "deposit money pouch".
Narcle
01-05-2012, 08:35 PM
Update 1.6.1: 01-05-2012 - Released
-Update to SRL5 (must have SRL5 or it won't work)
-AK to Bank has been fixed
-Fixed uptext bug that stopped it from making Cannonballs
-Speed has been increased (you will notice this one)
-Edge bank has been failsafed a bit more
Wetish
01-05-2012, 08:38 PM
Update 1.6.1: 01-05-2012 - Released
-Update to SRL5 (must have SRL5 or it won't work)
-AK to Bank has been fixed
-Fixed uptext bug that stopped it from making Cannonballs
-Speed has been increased (you will notice this one)
-Edge bank has been failsafed a bit more
Thanks :thumbsup:
Works great so far
jordi1104
01-05-2012, 09:32 PM
Don't know if you have implemented this in ur new version but in the last version it coulden't detect some random events and kept walking to bank or atleast trying while into a random.
So it walked for 4 hours while into a random can you make it so that it will only walk for 10 minutes or less when it can't find bank becouse it's not so handy if it keeps walking when it doesn't finds bank.
The random it coulden't detect was classroom mordaut.
nobody u kno
01-05-2012, 10:33 PM
How do I know Im at SRL5? I updated once and now it says theres no new update to srl. But when I run a script it still tries to deposit the money pouch instead of depositing the item bag.
Also says my simba is at 980 and there is a version 982 available. Do i need that?
Thanks
Reveille
01-06-2012, 01:57 AM
got me 99 :) script worked really well
ClasicPKname
01-06-2012, 02:44 AM
Currently this script is working for me.
Just a quick prog:
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ Kenn | True | 02:22:27 | 46 | 0 | 4988 | 31798 | 13392 ]
[================================================== ====================]
Cruck
01-06-2012, 04:18 AM
Everything seems to be working fine except the actual smelting. It withdraws the ores, "Going to smelt" then goes and stands infront of the furnace about 2 places back without actually smelting anything. After about 30 seconds - "Done Smelting, to cactus" -> to bank, deposits the ores, withdraws more and repeats the process. When I manually rotate the screen to land the dot on the furnace it manages to perform correctly. Any suggestions?
Edit: Fixed, pretty sure it was a graphics settings option...weird.
Anyway great script! Thanks
nobody u kno
01-06-2012, 05:36 AM
I get this error:
Exception in Script: Unable to find file 'srl/srl/misc/Smart.scar' used from ''
jordi1104
01-06-2012, 06:34 AM
How do I know Im at SRL5? I updated once and now it says theres no new update to srl. But when I run a script it still tries to deposit the money pouch instead of depositing the item bag.
Also says my simba is at 980 and there is a version 982 available. Do i need that?
Thanks
Try overriding update by right clicking update and selecting override update and then updating srl again.
TwoClover
01-06-2012, 08:01 AM
Testing the update now will post proggy. Only with be up to 6 hours hours though. I already have SRL5 updated and everything and was using the previous version for the past 2 days and was still working flawlessly at edgeville. glad to see that the update pushes for fixes in AK and speeds up the whole smelting process and with the cannonball text error thing too. I never encountered these, except AK banking. But really glad to see this.
Please please push for a Neitiznot smelter it would make thing faster and easier, no right click banking. :)
TwoClover
01-06-2012, 08:32 AM
Wow i already see an increase in speed. an extra 1k exp an hour from making cannonballs from ores. That is quite a substantial upgrade. IMO for smelting anyway.
nanana
01-06-2012, 04:23 PM
man really love ur bot but can u make the option to secure the saved password like username: zezima
password: *****
Fire Monkey
01-06-2012, 04:59 PM
Hey Narcle, coal bag doesn't seem to be working. It withdraws for it but doesn't click the bag at all. Then the script stops.
Narcle
01-06-2012, 07:15 PM
Hey Narcle, coal bag doesn't seem to be working. It withdraws for it but doesn't click the bag at all. Then the script stops.
mmk, umm sadly I still don't have coal bag to test =/
Can you get me a screen shot with the coal bag right clicked? (with click options menu for it open)
Pretty good script but it's begging for some repair sometimes it randomly stops for no reason also I am smelting steel. This doesn't make much sense but please try to fix it. Thanks
Fire Monkey
01-06-2012, 09:17 PM
mmk, umm sadly I still don't have coal bag to test =/
Can you get me a screen shot with the coal bag right clicked? (with click options menu for it open)
Sure.. I'll do that now.. I hadn't even noticed they'd updated the coal bag options until you asked :)
Btw - new way of filling the coal bag is to withdraw a full inv, left click a piece of coal and left click the coal bag - then it fills it up :)
At the furnace, you don't have to click withdraw or anything, it automatically uses the coal from the bag first.
Btw, loving the new walking it's very smooth and quick.
http://img189.imageshack.us/img189/421/coalbagmenu1.png
http://img252.imageshack.us/img252/4646/coalbagmenu2.png
Narcle
01-06-2012, 10:33 PM
Sure.. I'll do that now.. I hadn't even noticed they'd updated the coal bag options until you asked :)
Btw - new way of filling the coal bag is to withdraw a full inv, left click a piece of coal and left click the coal bag - then it fills it up :)
At the furnace, you don't have to click withdraw or anything, it automatically uses the coal from the bag first.
Btw, loving the new walking it's very smooth and quick.
http://img189.imageshack.us/img189/421/coalbagmenu1.png
http://img252.imageshack.us/img252/4646/coalbagmenu2.png
Yeah I guessed right, only way it could break the way I was doing it.
nobody u kno
01-06-2012, 11:11 PM
For cannonballs, do you guys usually do by steel bars or ores?
Bahamet0
01-07-2012, 03:48 AM
Thank you for using Simba,
Hakuna Matata.
[Error] (1493:19): Unknown identifier 'GetAmountBox' at line 1492
Compiling failed.
Whats the problem?
vashanddou
01-07-2012, 06:25 AM
Thank you for using Simba,
Hakuna Matata.
[Error] (1493:19): Unknown identifier 'GetAmountBox' at line 1492
Compiling failed.
Whats the problem?
I am currently helping through pm's no worries ^^.
Heya69
01-07-2012, 07:53 AM
Coal bag isn't working, wouldn't click on it.
Narcle
01-07-2012, 08:10 AM
Coal bag isn't working, wouldn't click on it.
I know its been reported. They changed it.
ClasicPKname
01-07-2012, 08:20 AM
This really isn't being reliable like it used to. :s
Narcle
01-07-2012, 09:36 AM
Someone test this plz, its for Coal bag fix. (I can't test it atm)
~ Line 1563 in Bank function
if HasCoalBag then//Coal Bag mod
if (WithDrawSeco > 0) then
begin
T := BankIndexToBankPoint(BankSlot2);
Withdraw(T.x, T.y, 0);
Timer := GetSystemTime + 60000;
Repeat
Wait(50);
if (GetSystemTime > Timer) then
Exit;
until (InvFull);
InvMouse(RandomRange(2, 11), mouse_Left);//Coal ore
wait(100+random(200));
InvMouse(1, mouse_Left);//Coal bag
Timer := GetSystemTime + 10000;
repeat
wait(50+random(100));
if InChat('already full') then
Deposit(2, 28, true);
if (GetSystemTime > Timer) then
Exit;
until (InvCount = 1);
end;
Replace HasCoalBag part with that.
(Don't try if you don't know how)
Faboking
01-07-2012, 03:32 PM
Does it smelt coal & iron into steel then makes cannonballs out of the steel?
nobody u kno
01-07-2012, 04:27 PM
Someone test this plz, its for Coal bag fix. (I can't test it atm)
~ Line 1563 in Bank function
if HasCoalBag then//Coal Bag mod
if (WithDrawSeco > 0) then
begin
T := BankIndexToBankPoint(BankSlot2);
Withdraw(T.x, T.y, 0);
Timer := GetSystemTime + 60000;
Repeat
Wait(50);
if (GetSystemTime > Timer) then
Exit;
until (InvFull);
InvMouse(RandomRange(2, 11), mouse_Left);//Coal ore
wait(100+random(200));
InvMouse(1, mouse_Left);//Coal bag
Timer := GetSystemTime + 10000;
repeat
wait(50+random(100));
if InChat('already full') then
Deposit(2, 28, true);
if (GetSystemTime > Timer) then
Exit;
until (InvCount = 1);
end;
Replace HasCoalBag part with that.
(Don't try if you don't know how)
I just tested that out. I have empty coal bag in 1st inventory slot. Started the script. It withdraws all coal. Then it uses a coal with the coal bag, but left clicks the coal bag while still in the banking screen. So then it just deposits the coal bag with one coal into the bank and sits there. I can let you use my account to work on the coal bag function if you want. Let me know.
Narcle
01-07-2012, 04:42 PM
I just tested that out. I have empty coal bag in 1st inventory slot. Started the script. It withdraws all coal. Then it uses a coal with the coal bag, but left clicks the coal bag while still in the banking screen. So then it just deposits the coal bag with one coal into the bank and sits there. I can let you use my account to work on the coal bag function if you want. Let me know.
Yes please. No one on irc would let me borrow. =/
nobody u kno
01-07-2012, 04:44 PM
Yes please. No one on irc would let me borrow. =/
Do you have Skype or MSN or something? I dont think ive ever used the irc lol
Narcle
01-07-2012, 05:07 PM
Update 1.6.2: 01-07-2012 - Released
-Fixed Coal bag use
-Fixed bug when going to AK furnace it would walk back sometimes.
(Thx to nobodyukno for letting me borrow account to fix this.)
kimalia
01-07-2012, 05:12 PM
hello! im using this script for making gold bars in edgeville...
and there is a problem depositing... it clicks the ''deposit money pouch contents'' instead of ''deposit carried items''
please fix asap! :)) thank you! :)
Narcle
01-07-2012, 05:16 PM
hello! im using this script for making gold bars in edgeville...
and there is a problem depositing... it clicks the ''deposit money pouch contents'' instead of ''deposit carried items''
please fix asap! :)) thank you! :)
This is fixed in SRL not my script. Use the latest version I have posted for SRL5 and make sure you update SRL. Don't ask in here how, there are threads all over forums about it.
kimalia
01-07-2012, 05:39 PM
i searched all over the forums... didnt find a tut how to update to SRL5
could you or someone please link me to a guide?! cuss i seriously cant find any...
P.S. will edit this post if i find one...
Stray Bullets
01-07-2012, 05:51 PM
i searched all over the forums... didnt find a tut how to update to SRL5
could you or someone please link me to a guide?! cuss i seriously cant find any...
P.S. will edit this post if i find one...
Isn't it just SRL > Check For Updates?
Faboking
01-07-2012, 06:25 PM
Can it smelt coal & iron into steel then makes cannonballs out of the steel?
Fire Monkey
01-07-2012, 07:00 PM
Wow, thank you Narcle for updating that so quick.. you're awesome! :)
Bahamet0
01-07-2012, 08:54 PM
As soon as mine gets on and starts running, it logs me out. It don't do anything but log me out, whats the problem?
kimalia
01-08-2012, 12:51 AM
thanks for the help guys! :)
also here is a smooth proggy (very nice script! 9,5/10)
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[ kima | True | 01:00:03 | 43 | 1176 | 0 | 26460| 26431 ]
stuffs
01-08-2012, 04:07 AM
Working extremely well, both at AK and Edge, great job.
[================================================== =====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== =====================]
[ ** | True | 08:19:17 | 403 | 0 | 11255 | 281375 | 33813 ]
[================================================== =====================]
This is the final proggy, got stopped by a random, so it would have still kept on going.
[================================================== =====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== =====================]
[** | True | 11:17:01 | 545 | 0 | 15231 | 380775 | 33745 ]
[================================================== =====================]
Tlhc15
01-08-2012, 12:37 PM
Don't know why it can't start. I am using the newest version. I didn't change anything in the script. I filled out the form, but when I tried to start it, this came out:
Error: Type Mismatch at line 1806
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]
I filled out the form like this:
http://imageshack.us/photo/my-images/717/formd.jpg/
If the image can't show up, it's here:
http://imageshack.us/photo/my-images/717/formd.jpg/
nobody u kno
01-08-2012, 03:18 PM
Have any of you guys noticed when making cannonballs from ores that sometimes itll make the steel bars and then just return to the bank?
Narcle
01-08-2012, 04:35 PM
Don't know why it can't start. I am using the newest version. I didn't change anything in the script. I filled out the form, but when I tried to start it, this came out:
I filled out the form like this:
http://imageshack.us/photo/my-images/717/formd.jpg/
If the image can't show up, it's here:
http://imageshack.us/photo/my-images/717/formd.jpg/
First off the form starts at player '0' not player 1. So its erroring out because no information is set for player 0. Delete player 1 and use player 0, and make sure Active is checked.
Have any of you guys noticed when making cannonballs from ores that sometimes itll make the steel bars and then just return to the bank?
I thought I fixed this. Its messing up because its miss reading the uptext. Wizzup said he would be getting a benchmark on a new OCR for it. (i removed the check in 1.6.2 i thought)
kimalia
01-08-2012, 08:27 PM
i have 2 questions for not only narcle but all who uses this script!
1. what should i make for making fastest exp!
2. what should i do to make the most money?
thanks! :)
Very nice bot. Working flawlessly (making ruby bracelets).
The only problem I've had is it getting confused when people tele-other, though of course if you turn off aid that is fixed anyway, just seems a bit bot-like to have it turned off.
Not got any long proggies I'm afraid, had to chat to people so turned the bot off (not sure how to interrupt the bot without stopping it, I'm still a Simba noob.)
EDIT: Done a little proggy. It stopped when it got frog random;
Item wasn't detected attempting a TPA update.
***** STR: FOUND RANDOM: 'Frog' *****
Screenshot of: Found Frog random 18 Minutes and 50 Seconds
Not in FrogCave!
***** STR: 'Frog' RANDOM SOLVING FAILED! *****
[================================================== ====================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ #### | False | 00:18:50 | 22 | 0 | 294 | 14700 | 46832 ]
[================================================== ====================]
ssshhhaaa
01-09-2012, 08:05 AM
When this tries to bank inventory, it instead clicks the withdraw all coins into bank button =p
Tlhc15
01-09-2012, 11:30 AM
Works for me flawlessly now! Will post proggies after smithing 1k steel bars...
[================================================== ===================]
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ *** | True | 02:03:16 | 124 | 1000 | 0 | 17500 | 8750 ]
[================================================== ===================]
Faboking
01-09-2012, 02:03 PM
Managed to get a 40k+ cball session, pc overheated and shutdown before I could save proggy. HP fucked me again!!
klit rs
01-09-2012, 05:34 PM
I just got your script and am starting it on cannonballs right now :) Thanks a lot for making it! Will post Proggy when I get one worth posting :)
Hakala
01-09-2012, 08:36 PM
Ores -> bars -> c'balls
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ===================]
[ **** | True | 03:17:16 | 125 | 756 | 3024 | 32592 | 10318 ]
Bars -> c'balls
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ **** | True | 04:24:37 | 73 | 0 | 7952 | 50694 | 11845
Also about half way to 99 smithing, 92 currently, all with cannonballs.
Might need to donate again soon hmm..
Faboking
01-09-2012, 08:37 PM
When using Cballs from ore it sometimes doesnt make cballs for a inv or two, it just banks the steel bars, it's in my opinion a low priority bug; but for others who are suicide botting, it might end up in a loss of 10k cballs and then I know I would run into a wall and smash a couple laptops. ADHD rage ftw <3
Narcle
01-09-2012, 08:45 PM
When using Cballs from ore it sometimes doesnt make cballs for a inv or two, it just banks the steel bars, it's in my opinion a low priority bug; but for others who are suicide botting, it might end up in a loss of 10k cballs and then I know I would run into a wall and smash a couple laptops. ADHD rage ftw <3
Its messing up because its miss reading the uptext. Wizzup said he would be getting a benchmark on a new OCR for it. (i removed the check in 1.6.2 i thought)
^^^
Bahamet0
01-09-2012, 11:39 PM
Why do the bot shout out the name & password of your rs account soon as the bot starts up? lol
well it tryed doing it with me but it wouldn't allow it. I was trying to smith cballs in al kahrid and it randomly shouted it out.
nobody u kno
01-09-2012, 11:58 PM
Why do the bot shout out the name & password of your rs account soon as the bot starts up? lol
well it tryed doing it with me but it wouldn't allow it. I was trying to smith cballs in al kahrid and it randomly shouted it out.
Did you restart the script or something when it was already logged in?
Bahamet0
01-10-2012, 04:28 AM
Did you restart the script or something when it was already logged in?
Nope!
Hakala
01-10-2012, 04:16 PM
Why do the bot shout out the name & password of your rs account soon as the bot starts up? lol
well it tryed doing it with me but it wouldn't allow it. I was trying to smith cballs in al kahrid and it randomly shouted it out.
Happens to me quite often when I use multiple accounts.
Bot try's to log in, but it cannot go to the world because other acc is in there already, so I disable smart, choose world and enable it again.
At this point the bot tries to login to other account (I have set multiple ones), only it says the login and password to the whole world.
I'm glad you cannot say password anymore.
TwoClover
01-10-2012, 07:13 PM
I have no clue what the problem is with everyone. I don't use AK because Edgeville is flawless, IMO. Its quicker and faster with about 14k xp/hr by makings Cballs from ores. After the update V1.6.2 I made 40k Cballs, or 10,000 iron ores with 20,000 coal ores and only made like 50 steels bars from it. no problem with me.
Wetish
01-10-2012, 07:42 PM
I just got home from school and my desktop is covered in screenshots of player mods talking. That is just one of the amazing features of this script.
kimalia
01-10-2012, 09:38 PM
this script is truly amazing! yesterday i did 10k gold today i bought ores for 5k steel bars (doing ore - to c balls) atm. and its working amazing! in edge btw!
EDIT: going to bed now... here is my proggy:
-ore:bar:ball's-
[ Nick | Active | Worked | Banked | Bars | Crafted | XP | XP/Hour ]
[================================================== ====================]
[ kima | True | 04:25:41 | 158 | 1404 | 5616 | 60528 | 13669 ]
[================================================== ====================]
JackofSPades707
01-11-2012, 07:45 AM
Nevermind, for some reason my runescape switched the graphics on me without my consent... lol
This script works like a charm! :)
loser69
01-11-2012, 07:57 AM
Why do the bot shout out the name & password of your rs account soon as the bot starts up? lol
well it tryed doing it with me but it wouldn't allow it. I was trying to smith cballs in al kahrid and it randomly shouted it out.
LOL this happened to me lucky RS blocks password shouting
pk3ryoyo
01-11-2012, 11:58 AM
runescape just had a system update today around 12:50pm UTC time and since then it won't click to open bank to withdraw/deposit. It just moves the dot around right clicking but not actually clicking to open. there a fix?
eimis
01-11-2012, 01:02 PM
Hey narcle i have a little problem now with the script today was a new update i dont know when it was, i was in school so when i got back i saw that theres an update. I tried reinstaling simba with all updates but still ur latest script doesnt work it only logs in and tries to take ores in order to make mith bars.. oh yeh and also it does open my bank that means it puts the pin correct..
Plz update the script because i think im not the only one with these problems.
P.S. srry for mistakes i was in a rush.. :)
stuffs
01-11-2012, 02:56 PM
Hey narcle i have a little problem now with the script today was a new update i dont know when it was, i was in school so when i got back i saw that theres an update. I tried reinstaling simba with all updates but still ur latest script doesnt work it only logs in and tries to take ores in order to make mith bars.. oh yeh and also it does open my bank that means it puts the pin correct..
Plz update the script because i think im not the only one with these problems.
P.S. srry for mistakes i was in a rush.. :)
Kind of sad your first post is one begging a scripter to update, when Runescape updated, and there's absolutely nothing Narcle can do about it.
Be patient and wait for the fonts to be updated.
Tuning1st
01-11-2012, 03:00 PM
Hey narcle i have a little problem now with the script today was a new update i dont know when it was, i was in school so when i got back i saw that theres an update. I tried reinstaling simba with all updates but still ur latest script doesnt work it only logs in and tries to take ores in order to make mith bars.. oh yeh and also it does open my bank that means it puts the pin correct..
Plz update the script because i think im not the only one with these problems.
P.S. srry for mistakes i was in a rush.. :)
Dont try reinstalling more, the script needs update :P
nickop12
01-11-2012, 03:22 PM
i need help with something... can anyone help??
nickop12
01-11-2012, 03:28 PM
When i goes to the bank the bot won't go into my bank or when im smithing my bot brings me back to the bank and i don't know why ?can anyone help?
nickop12
01-11-2012, 03:39 PM
i redownloaded everything.....this stop working last night
Shady89
01-11-2012, 03:54 PM
i redownloaded everything.....this stop working last night
please learn to read and please dont triple or even double post.
The guy above you said runescape updated , thats why its not working...
jayanth
01-11-2012, 04:06 PM
Narcle pls update the script pls.
Narcle
01-11-2012, 04:42 PM
You guys have no patience at all...
The script doesn't need to be updated. Wait for SRL update, it will fix it.
nickop12
01-11-2012, 04:57 PM
So when can we bot again?
Wetish
01-11-2012, 04:59 PM
So when can we bot again?
When SRL updated as stated in the post above.
nickop12
01-11-2012, 05:00 PM
hahaha when is it going to be updated?
Silent
01-11-2012, 05:19 PM
hahaha when is it going to be updated?
Stop asking for ETA's. It will be updated when the devs that volunteer their time have a chance to get the problem resolved.
Please learn to have some patience and respect for the people that create this and let you use it for free.
As Narcle said, it isn't a problem with his script, it's an SRL update that needs to take place. Just. Wait.
oudshoorn
01-11-2012, 05:46 PM
lol didnt bot for about a week and i missed 5 versions already xD
damn i just read the things above, silent spy i agree so much with you
kazhual
01-11-2012, 07:31 PM
not authorised so deleted
kazhual
01-11-2012, 07:40 PM
not authorised so deleted
Narcle
01-11-2012, 07:41 PM
@kazhaul
Remove re-posted script, I did not give you permission. The SRL update will fix it.
(This is to prevent potential stealing of accounts, not that you would just it can't be a habit period.)
stuffs
01-11-2012, 07:46 PM
@kazhaul
Remove re-posted script, I did not give you permission. The SRL update will fix it.
(This is to prevent potential stealing of accounts, not that you would just it can't be a habit period.)
Both Edge and AK are working 100% now though, so his edited version is pointless.
kazhual
01-11-2012, 08:03 PM
@kazhaul
Remove re-posted script, I did not give you permission. The SRL update will fix it.
(This is to prevent potential stealing of accounts, not that you would just it can't be a habit period.)
Well didnt know this and wanted to fix the problem fast.
Wont do it again (A)
Narcle
01-11-2012, 08:06 PM
Well didnt know this and wanted to fix the problem fast.
Wont do it again (A)
I have no problem with people posting small code snippets to fix the script. Just not the entire script.
E: As I implied nothing against you, glad you wanted to help the "noobs" :)
Shady89
01-11-2012, 08:43 PM
narcle i love you and your script thanks alot :)
kazhual
01-11-2012, 09:06 PM
I have no problem with people posting small code snippets to fix the script. Just not the entire script.
E: As I implied nothing against you, glad you wanted to help the "noobs" :)
Learning the script code of this software, im familair with java and C++.
The hard part is the syntax description of actions.
The examples are written in a complex way.
I would have like to see the very minimum of a action :D
nickop12
01-11-2012, 10:47 PM
fixed yet??
jayanth
01-12-2012, 04:38 AM
SRL had been updated,i think now check for updates in srl menu and it would work!!
Anybody pls help me a error is coming up when i am going to run the script,I know it is a smart error but i need help.
SMART Initialized.
Loaded: Server 1, Members: True, Signed: True, Super Detail: False.
Error: Exception: Access violation at line 101
The following DTMs were not freed: [SRL - Lamp bitmap, 1]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]
when i clicked run its coming pls help me.
TwoClover
01-12-2012, 05:38 AM
Man I have no idea whats up with everyones problems. It doesn't need to be fixed because its not broken. I have no idea what I'm doing with anything, I don't know how to code but just some simple common sense I can figure whats wrong and research it. Asking for help is O.K but this thread is 60 pages long and I've seen alot of people complaining about the same stuff thats already been answered or fixed. Take like 20mins for yourself and do something. CMon this script working amazingly perfect. Using it as we speak.
jayanth
01-12-2012, 05:47 AM
Man I have no idea whats up with everyones problems. It doesn't need to be fixed because its not broken. I have no idea what I'm doing with anything, I don't know how to code but just some simple common sense I can figure whats wrong and research it. Asking for help is O.K but this thread is 60 pages long and I've seen alot of people complaining about the same stuff thats already been answered or fixed. Take like 20mins for yourself and do something. CMon this script working amazingly perfect. Using it as we speak.
i forgot to install java,because i have formatted my system yesterday and forgot to install java.Now the script is working perfectly and the SRL has been updated !!!!:spot:
Quintessence
01-12-2012, 07:59 AM
Working absolutely flawlessly. There's a slight error in the progress reports in that when smelting gold ores, it doesn't take into account the 2x experience of gold smithing gauntlets.
I'll post a progress report later on.
TwoClover
01-12-2012, 08:24 AM
i forgot to install java,because i have formatted my system yesterday and forgot to install java.Now the script is working perfectly and the SRL has been updated !!!!:spot:
Glad to here it. I was just going through an entire reinstall of Simba. Just in case I was missing "something" and was going through SRL FAQ and tutorial island and stuff. I downgraded my Java version from 7 to 6.30 JDK and JRE and it makes the FPS way smoother now. So I did get a plus out of all of this. I highly recommend downgrading to 6.30 if you have Java7
jayanth
01-12-2012, 09:14 AM
yeah i too recommend all to downgrade to java 6.30 because see this
http://villavu.com/forum/showthread.php?p=848708
made by yohojo its very usefull:)
its a lag fix!!!
Gimpy666
01-12-2012, 02:10 PM
fixed yet??
You have 0 respect for people who work hard to provide you with a free service. It's people like yourself that deter developers from providing stuff for free to the general public. Instead of nagging and being too lazy to read or search for material pertaining to the current status of SRL and where it is in terms of being up to date with the latest Runescape patches, why not thank the author or offer support, or simply just wait until the author announces it is fixed? Trust me, he knows when it isn't working and nagging doesn't really help. It is rather frustrating and annoying to see.
oudshoorn
01-12-2012, 04:08 PM
You have 0 respect for people who work hard to provide you with a free service. It's people like yourself that deter developers from providing stuff for free to the general public. Instead of nagging and being too lazy to read or search for material pertaining to the current status of SRL and where it is in terms of being up to date with the latest Runescape patches, why not thank the author or offer support, or simply just wait until the author announces it is fixed? Trust me, he knows when it isn't working and nagging doesn't really help. It is rather frustrating and annoying to see.
you just said what was on my mind when i saw his post :D
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.