View Full Version : [Simba/SCAR] Coh3n's Anywhere PowerChopper
Coh3n
09-17-2009, 08:07 AM
dropping is very, very slow...
Lol.
hey cohen ty soooo much. i got from 30 to 61 wc in a couple hours if anyone thinks this script is bad ur WRONG this script rox and so you cohen!
Will send proggy soon :)
Hey no problem, glad it's working well for you. :)
Hey Most here :P
When i First loaded up this script took a look, it all checked out good, Compiled, so i filled out Declare and such. Hit the run button, and an RS Window showed up, i was like Oh whats this.. i've been reading up on the smart system, but don't really understand it. Anyways, when i start it up it opens the RS window and just sits there doesn't log me in and doesn't stop and i just can not figure it out. I Havn't been here in a long time and i was just starting to get back into it and now im just having this little problem any help would be awesome
Also saying "It has been 3 minutes and Runescape is not yet ready... Terminating.", then Says Proggy and Ends.
Thanks. Most.
Hmm, the only thing I can tell you is to close and reopen SCAR and try again. You could also run the script, wait until SMART is open, execute the script, and then try running it when SMART is already open.
Noumies
09-17-2009, 08:07 AM
Hii im kind of new to this scar stuff and i got everything working except when i run it.. the smart logs in then it checks my axe then wc lvl then it says Tree not in declare players and String not in declare players
i did tell it to cut normal trees thought im confused
then it logs me out =S
Coh3n
09-17-2009, 08:09 AM
Hii im kind of new to this scar stuff and i got everything working except when i run it.. the smart logs in then it checks my axe then wc lvl then it says Tree not in declare players and String not in declare players
i did tell it to cut normal trees thought im confused
then it logs me out =S
You must not have filled it out properly. To cut normal trees you want it to look like this. Say my username is Coh3nisawesome, and the password is hello1.
with Players[0] do
begin
Name := 'Coh3nisawesome';
Pass := 'hello1';
Nick := 'awe';//3-4 lowercase letters from username.
Active := True;//Use this player?
Strings[0] := 'tree';//Which tree to cut?
Integers[0] := 1000;//How many logs to cut?
Booleans[0] := True;//Is hatchet equiped?
Booleans[1] := True;//Take breaks?
BoxRewards := ['amp', 'mote', 'ostume', 'oins', 'unes', 're', 'ems'];
end;
I hope that helps.
Most Fiction
09-17-2009, 08:48 AM
Tried Restarting Scar, Tried restarting Computer, Tried Starting while smart is open.. Nothing seems to work hmm.
Noumies
09-17-2009, 09:08 AM
Thank You coh3n i got it to work but i have another prob....i cut 1 full invent then it drops and cuts 2 logs but then it just stays there and examines the 2 logs for like ages...so i restarted and its the same thing it always examines after a few logs and doesnt stop lols
Tried Restarting Scar, Tried restarting Computer, Tried Starting while smart is open.. Nothing seems to work hmm.
When SMART is loading, you have to make sure SMART is enabled. So it should say on the bottom Disable SMART, Enable debugging, and Enable something else, if it doesn't, click on Enable SMART. If that doesn't work, then make sure you don't set anything as the client (don't drag the crosshair to anything.. not sure if this matters, but it could help.. :)).
Coh3n
09-17-2009, 10:22 AM
Thank You coh3n i got it to work but i have another prob....i cut 1 full invent then it drops and cuts 2 logs but then it just stays there and examines the 2 logs for like ages...so i restarted and its the same thing it always examines after a few logs and doesnt stop lols
Make sure you have the latest version of SCAR/SRL. If it still happens, delete line 207, and see if that helps.
edtor
09-17-2009, 11:42 AM
Hey Most here :P
When i First loaded up this script took a look, it all checked out good, Compiled, so i filled out Declare and such. Hit the run button, and an RS Window showed up, i was like Oh whats this.. i've been reading up on the smart system, but don't really understand it. Anyways, when i start it up it opens the RS window and just sits there doesn't log me in and doesn't stop and i just can not figure it out. I Havn't been here in a long time and i was just starting to get back into it and now im just having this little problem any help would be awesome
Also saying "It has been 3 minutes and Runescape is not yet ready... Terminating.", then Says Proggy and Ends.
Does that window blink while loading 3d animations?
If so, try opening RS in a normal window and select: Window style: Fixed mode, after that retry and it should load and work properly.
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.5 =============================]
[ ]
[ Ran For: 3 Hours, 1 Seconds ]
[ Loads Done: 73 ]
[ Logs Chopped: 2044 ]
[ Levels Gained: 0 ]
[ Exp Gained: 137970 ]
[ Breaks: 0 ]
[ Randoms Solved: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
I mean, does it solve it then return true? or does it fail it then return true? or there is no difference (Return true both failed and solved)?
adunrs
09-17-2009, 03:37 PM
didnt recognise beekeeper, just stands there rotating the screen
Most Fiction
09-17-2009, 04:14 PM
Changed to Fixed Mode, Started Working like a dream :D, will have a proggy tomorrow morning Thx
redz8734
09-17-2009, 07:56 PM
uh oh lol this isnt a problem with your script i doubt it at least because its worked till now :P i have to disable smart when it trys to find my WC lvl lol im currently lvl 76 WC but when i run the script >>
Creating the NickTPA.
Found normal hatchet.
Woodcutting level is 0.
Your woodcutting level isn't high enough to cut willows, logging out.
Inventory full, dropping logs...
[================================================== ===============]
i dont remember changing anything on my computer but if uve seen this before and know how to change it id like to know how XD but once i disable smart and start him on a tree there is no problem with the chopping so this problem doesnt slow me down.
Coh3n
09-17-2009, 10:23 PM
I mean, does it solve it then return true? or does it fail it then return true? or there is no difference (Return true both failed and solved)?
I'm pretty sure that it returns true when it finds a random, it doesn't matter whether or not it solves it.
didnt recognise beekeeper, just stands there rotating the screen
Okay, I think I know the problem of that, thanks.
uh oh lol this isnt a problem with your script i doubt it at least because its worked till now :P i have to disable smart when it trys to find my WC lvl lol im currently lvl 76 WC but when i run the script >>
I have seen that error before, and unfortunately, I have no idea why it's going that. It seems to do it for different levels for different people. It has always worked for me, and I've gone from level 50-79 woddcutting on my testing account. Sorry I don't have a fix for this, but you could try restarting SCAR, etc.
Script updated!
-> I added some more Randoms checks, so hopefully it doesn't sit there rotating the camera while in a random event.
adunrs
09-18-2009, 12:51 AM
hej cohen why u said 'lol.' on my comment it drops very slow? :p can u tell me how to increase drop speed..? :)
adunrs
hej cohen why u said 'lol.' on my comment it drops very slow? :p can u tell me how to increase drop speed..? :)
adunrs
It is probably dropping slow due to SRL's ChooseOption causing lag. I don't think that it has anything to do with the script.
If the script does not already do this, try changing the dropping sequence from 1,2,3,4...etc. to 1,5,9,13,17,21,25 , 2,6,10...etc., because after the drop option is clicked, the mouse will be much nearer to the next log. I made a DropToFast procedure like 2 years ago based on this :rolleyes:
You could also try increasing your mouse speed in this particular area of the script.
Coh3n
09-18-2009, 01:00 AM
hej cohen why u said 'lol.' on my comment it drops very slow? :p can u tell me how to increase drop speed..? :)
adunrs
What JAD said, but I'm sure it will be fixed in SRL soon enough. Also, I said 'lol' because that's all you said, no comment about the script, no proggy, no thanks for making the script, just "the dropping is slow", I just found it funny, that's all.
adunrs
09-18-2009, 01:23 AM
What JAD said, but I'm sure it will be fixed in SRL soon enough. Also, I said 'lol' because that's all you said, no comment about the script, no proggy, no thanks for making the script, just "the dropping is slow", I just found it funny, that's all.
i am vewwy sorry :D i commented on the script in another post too btw. but yeh, i'm a guy of critics - just trying to help you improve every single bit of the script! i'm currently using another powerchopper because it drops way faster, so i have no proggy but when it is fixed i'm gonna use this one and i WILL post an overnight one! keep up the good work and i LOVE it that u respond soo fast on your thread :D
adunrs
edtor
09-18-2009, 02:06 AM
Changed to Fixed Mode, Started Working like a dream :D, will have a proggy tomorrow morning Thx
Im glad i could help :)
uh oh lol this isnt a problem with your script i doubt it at least because its worked till now :P i have to disable smart when it trys to find my WC lvl lol im currently lvl 76 WC but when i run the script >>
Creating the NickTPA.
Found normal hatchet.
Woodcutting level is 0.
Your woodcutting level isn't high enough to cut willows, logging out.
Inventory full, dropping logs...
[================================================== ===============]
i dont remember changing anything on my computer but if uve seen this before and know how to change it id like to know how XD but once i disable smart and start him on a tree there is no problem with the chopping so this problem doesnt slow me down.
Im getting that also, if u want it to work just do this:
1.- Change the symbol on lline 238. < to > . Should be like this:
Line 238: if (Result > Req) then
Note: if u change this symbol, you will have to choose that you can cut, since the script won't detect your level and what u are able to cut.
or
2.- Delete this lines from the script:
Line 238 if (Result > Req) then
Line 239 begin
Line 240 Writeln('Your woodcutting level isn''t high enough to cut '
Line 241 + Players[CurrentPlayer].Strings[0] + 's, logging out.');
Line 242 S_SwitchPlayer;
Line 243 end;
Note1: If you delete this part, the script won't be able to detect your level and you can assign any type of tree to chop down. This won't mean that you will be able to cut any down of tree.
Note2: Line numbers may be different since i modified some things on my script :), gl. If u can't find those lines, try Control + F :norris:
Coh3n
09-18-2009, 02:44 AM
i am vewwy sorry :D i commented on the script in another post too btw. but yeh, i'm a guy of critics - just trying to help you improve every single bit of the script! i'm currently using another powerchopper because it drops way faster, so i have no proggy but when it is fixed i'm gonna use this one and i WILL post an overnight one! keep up the good work and i LOVE it that u respond soo fast on your thread :D
Lol, don't be sorry, I know you were only trying to help me. :) I shouldn't have just said "Lol", that was pretty rude on my part. It wont happen again. Just out of curiousity, which powerchopper are you using now? I would like to look at their dropping procedure, so maybe I can fix mine.
_______________________________
For those of you having the problem with the scripting getting your woodcutting level, I'm also having that issue for the first time. I'm pretty sure one of the functions in SRL is messed up. So here is what I'm going to do. I have some time right now, so I'm going to see if I can fix the dropping procedure, and I'm going to completely get rid of the function that checks your woodcutting level. I'll be able to add it back in when SRL gets updated.
I should be able to upload a new version sometime in the next hour or so.
Thanks for being patient,
Coh3n
Coh3n
09-18-2009, 04:54 AM
Script updated!
From what I have tested, the script is a lot better! :) Check the first post for a full list of what was updated.
Thanks,
Coh3n
Noumies
09-18-2009, 05:06 AM
THank You Very Much Coh3n the v1.8 fixed all my probs except for one when i got to lvl 15 wc the smart mouse just stopped moving whn it was on the inventory bag mark, lol looking forward to newer versions even though this one is pretty good =D
Oh and Btw is it supposed to give a proggy after every inventory
or that ^ and one big one at the end?
Coh3n
09-18-2009, 05:58 AM
THank You Very Much Coh3n the v1.8 fixed all my probs except for one when i got to lvl 15 wc the smart mouse just stopped moving whn it was on the inventory bag mark, lol looking forward to newer versions even though this one is pretty good =D
Oh and Btw is it supposed to give a proggy after every inventory
or that ^ and one big one at the end?
Your first problem - Does it not start chopping again after about 10-15 seconds? Or does it just keep the mouse on the inventory tab forever?
You question - it's suppose to give you one after every inventory dropped, and one at the end.
Most Fiction
09-18-2009, 07:42 AM
Had a 4 Hour Proggy but im Comp Restarted and i lost it
Coh3n
09-18-2009, 07:43 AM
Had a 4 Hour Proggy but im Comp Restarted and i lost it
Was that with the new version?
Most Fiction
09-18-2009, 07:49 AM
yea, with the Newest one. 1.7
Coh3n
09-18-2009, 07:49 AM
yea, with the Newest one. 1.17 i think
Okay, that's great to know, thanks. :) I'm glad the new version is working well.
jerrymathew
09-18-2009, 09:47 AM
kind of slow for me
Coh3n
09-18-2009, 10:38 AM
kind of slow for me
It would be nice if you could be more specific. What part is slow?
jerrymathew
09-18-2009, 05:40 PM
when i click a tree it gets stuck for a while then it moves
so after getting like 6 logs it closes it self
it could be my computer
Coh3n
09-18-2009, 09:11 PM
when i click a tree it gets stuck for a while then it moves
so after getting like 6 logs it closes it self
it could be my computer
Does SCAR close you mean?
jerrymathew
09-19-2009, 02:56 AM
no smart(runescape window)
Coh3n
09-19-2009, 03:31 AM
no smart(runescape window)
That's not a problem when the script then. Make sure you have the latest SCAR/ Dev SVN.
redz8734
09-20-2009, 08:33 AM
its been a while scince i posted a proggy so imma post one now... woot! 5 more lvls till i get to cut some magics for profit lol (lvl 80 atm ^^) yews are good but meh i wanna try something more fun :P
Inventory full, dropping logs...
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 4 Hours, 13 Minutes and 44 Seconds ]
[ Loads Done: 64 ]
[ Logs Chopped: 1791 ]
[ Levels Gained: 0 ]
[ Exp Gained: 120892.5 ]
[ Breaks: 3 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
it logged out after 4 hours :O pretty good proggy i think ^^.... after that proggy froze up i ran it again before i went to bed on a 2000 log run and guess what :O :O:O it finished the run! im proud:P
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 4 Hours, 28 Minutes and 15 Seconds ]
[ Loads Done: 72 ]
[ Logs Chopped: 2016 ]
[ Levels Gained: 1 ]
[ Exp Gained: 136080 ]
[ Breaks: 3 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
scince this post seems lucky ill just update it to show my best proggys
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 4 Hours, 32 Minutes and 7 Seconds ]
[ Loads Done: 72 ]
[ Logs Chopped: 2016 ]
[ Levels Gained: 1 ]
[ Exp Gained: 136080 ]
[ Breaks: 3 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
zuluguy
09-21-2009, 05:16 AM
here is my proggy:) just on the first break thought i would say how awesome this is:D
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 3 Minutes and 25 Seconds ]
[ Loads Done: 19 ]
[ Logs Chopped: 532 ]
[ Levels Gained: 1 ]
[ Exp Gained: 35910 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Coh3n
09-21-2009, 05:24 AM
Hey thanks guys, I'm glad it's working out well for you. :)
like it a lot so far.
only hiccup was a random in the abyss.
here is proggy so far
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 56 Minutes and 28 Seconds ]
[ Loads Done: 12 ]
[ Logs Chopped: 336 ]
[ Levels Gained: 2 ]
[ Exp Gained: 22680 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
another thing that i noticed is that every few seconds, even if i am still harvesting a tree, it will click either on that tree or another. and the tree it chooses to harvest next is often not the nearest tree to me. but it does run well overall and drops the logs as it should. although it seems to drop everything from inventory not just logs.
Coh3n
09-21-2009, 06:14 PM
another thing that i noticed is that every few seconds, even if i am still harvesting a tree, it will click either on that tree or another. and the tree it chooses to harvest next is often not the nearest tree to me. but it does run well overall and drops the logs as it should. although it seems to drop everything from inventory not just logs.
In the future, try not to double post, just edit your last post. ;) And, I don't have an option for it to keep the random event items or anything, so that's why it drops everything (not just the logs). As long as it doesn't drop your hatchet when it's in your inventory, that's where we would have a problem.
ahh ok will do with editing in the future. should i do that with new proggy? replace the original one with new ones? also the thing with the clicking trees every few seconds had me running around between 3 trees for several minutes at one point never actually doing more than starting to hit any of them. seemed odd behavior.
Coh3n
09-22-2009, 01:36 AM
ahh ok will do with editing in the future. should i do that with new proggy? replace the original one with new ones? also the thing with the clicking trees every few seconds had me running around between 3 trees for several minutes at one point never actually doing more than starting to hit any of them. seemed odd behavior.
Yeah, you can just keep editing with different reports. And I heard that SRL is broken somehow, but I'm not exactly sure how, so that could be why the script is doing that. Try updating your SRL, and see how it goes.
hmm yeah just recently the script stopped logging in, so redownloaded SCAR and SLR and tried using the smart.scar testing script and even it won't log in now. so will wait till that works to continue testing.
-------------- edits --------------
It was working fine during the night, but while I was indisposed, the character got pulled into a random (freaky forrester?) and it stopped with a msg about not being able to find the 3 tail pheasent. I logged back in using regular browser and did the random and got back to my WC spot.
Tried to run script and it wouldn't log in. So first thing I did was try the smart.scar test script. It opened smart (well ok it opened it once for a few seconds, then closed it and opened again like it always has down) and just sat there at the main menu. The next thing I did was uninstall scar and delete everything. Redownloaded and installed, and redid includes and SLR. smart.scar did same thing. so following some info in another thread i used svn to get the updates to SCAR and SLR from developer repositories. still just sits at the main menu. usually it clicks the SD box and if needed changes video settings but never did any of that. Seems like it never gets out of the SetupSLR call.
Personally i am wondering if there was a RS update this morning that might be causing this.
------------ edit 2 ----------------------
got it fixed. somehow the grpahics settings had switched to resizeable. once they got put to fixed, the next time i ran the bot it logged in with no problems
Coh3n
09-22-2009, 02:42 AM
hmm yeah just recently the script stopped logging in, so redownloaded SCAR and SLR and tried using the smart.scar testing script and even it won't log in now. so will wait till that works to continue testing.
Okay, SRL must be broken. I've had a few people ask me if it's been updated or not. Unfortunately, I've been pretty busy lately so I don't know exactly what's going on. However, I've sure the devs are working hard to get it working again (if it is, in fact, broken).
adunrs
09-22-2009, 03:41 AM
thanks A LOT for the update, it's waaay faster now. only problem now is that it's causing massive lagg on runescape client and my windows itself. any ideas why that is? u checking things too much maybe? currently running, cant do an overnighter this night but i'll get you a 10h+ proggy asap.
adunrs
Coh3n
09-22-2009, 03:44 AM
thanks A LOT for the update, it's waaay faster now. only problem now is that it's causing massive lagg on runescape client and my windows itself. any ideas why that is? u checking things too much maybe? currently running, cant do an overnighter this night but i'll get you a 10h+ proggy asap.
adunrs
I think SRL is messed up right now, so that could be your problem. There shouldn't be any lag, I haven't heard that from anyone else, and I don't experience it myself.
Bionicle
09-22-2009, 04:24 AM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 3 Hours, 2 Minutes and 37 Seconds ]
[ Loads Done: 67 ]
[ Logs Chopped: 1876 ]
[ Levels Gained: 0 ]
[ Exp Gained: 126630 ]
[ Breaks: 2 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
aaand next:
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 4 Hours, 23 Minutes and 37 Seconds ]
[ Loads Done: 104 ]
[ Logs Chopped: 2912 ]
[ Levels Gained: 0 ]
[ Exp Gained: 196560 ]
[ Breaks: 3 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
hawt script, great job rep++ 4 u <3
adunrs
09-22-2009, 04:27 AM
I think SRL is messed up right now, so that could be your problem. There shouldn't be any lag, I haven't heard that from anyone else, and I don't experience it myself.
might be SRL, but with AnyTreePowerCutter i dont have that problem. and it's serious rlly, consuming 75-97% of my CPU on a intel dual core with 1.83GHz :p whatever, good script mate ;)
adunrs
Coh3n
09-22-2009, 04:40 AM
@bionicle - awesome proggys, I'll add to the first post later.
might be SRL, but with AnyTreePowerCutter i dont have that problem. and it's serious rlly, consuming 75-97% of my CPU on a intel dual core with 1.83GHz :p whatever, good script mate ;)
adunrs
Well that's not good, I wonder why. Is anyone else having this problem with this script?
Bionicle
09-22-2009, 04:56 AM
@bionicle - awesome proggys, I'll add to the first post later.
Well that's not good, I wonder why. Is anyone else having this problem with this script?
none what so ever, as you can see wit my proggys ;)
redz8734
09-22-2009, 07:13 AM
this proggy is amazing (to me) and seeing as its still running ill have to update this later but i cant wait lol... i set it on a 5000 log run i have been checking on it everynoe and then i forced it to take a 45 minute break instead of just 15(just in case a mod or someone sees that ive only been taking 15 minute breaks every hour) and here is the result as of now :P
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 8 Hours, 13 Minutes and 8 Seconds ]
[ Loads Done: 128 ]
[ Logs Chopped: 3583 ]
[ Levels Gained: 1 ]
[ Exp Gained: 241852.5 ]
[ Breaks: 6 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Taking a 15 minute break.
there was only two randoms so far and i heard both of em so it didnt get to try to solve any randoms but i prefer it when the script doesnt stop cuz of a random:P
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 10 Hours, 12 Minutes and 30 Seconds ]
[ Loads Done: 156 ]
[ Logs Chopped: 4367 ]
[ Levels Gained: 2 ]
[ Exp Gained: 294772.5 ]
[ Breaks: 8 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Successfully executed
only reason it stopped was me >< i was stupid lol i forgot to pause the script before walking outta my house with my laptop lol and when i relogged in it bugged out lol
Coh3n
09-22-2009, 08:19 AM
none what so ever, as you can see wit my proggys ;)
Okay that's good to know. Sorry, Adunrs, I'm not sure why it's being slow for you. :confused:
this proggy is amazing (to me) and seeing as its still running ill have to update this later but i cant wait lol...
It is an amazing report, the best since I've released this script (excluding a 15 hour report using a much older version). I added both yours and Bionicle's to the first post.
I'm glad this is working well for you guys, if only I could get the walking in my Draynor banker to work just as well. *sigh*
Cheers,
Coh3n
adunrs
09-22-2009, 04:51 PM
gonna leave it on while in class today (lets pray for solvable randoms :p) wish me luck!
Coh3n
09-23-2009, 06:14 AM
gonna leave it on while in class today (lets pray for solvable randoms :p) wish me luck!
Good luck! :p
This works perfect.
Care to post a progress report? Or is that just spam?
imso1337
09-23-2009, 10:29 AM
ill try tomorrow
adunrs
09-24-2009, 04:35 AM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 28 Minutes and 11 Seconds ]
[ Loads Done: 29 ]
[ Logs Chopped: 812 ]
[ Levels Gained: 0 ]
[ Exp Gained: 54810 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
******** FOUND MOD ********
(name hidden)
******** FOUND MOD ********
(name hidden)
******** FOUND MOD ********
(name hidden)
******** FOUND MOD ********
logged back in to find out that a mod had been watching me for some time... lets pray now...
(edit: been talking to him for some time now :p he reported me but thats it)
Coh3n
09-25-2009, 05:58 AM
Lol well hopefully you don't get banned. :p But I'm glad it was working well for you. :)
adunrs
09-26-2009, 12:57 AM
still not banned .. but im gonna play legit for a while to make it cool down :p
appolo13
09-26-2009, 01:48 AM
da,m thanks for sharing it it works realy great
NickRx91
09-26-2009, 02:17 AM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 57 Minutes and 7 Seconds ]
[ Loads Done: 17 ]
[ Logs Chopped: 459 ]
[ Levels Gained: 2 ]
[ Exp Gained: 30982.5 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Worked great
New run
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 33 Minutes and 41 Seconds ]
[ Loads Done: 26 ]
[ Logs Chopped: 702 ]
[ Levels Gained: 2 ]
[ Exp Gained: 47385 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
The smart client went all white :(
oh and i gained a level before it went white, just didnt record it :(
lightcam999
09-26-2009, 04:26 AM
[ ]
[ Ran For: 13 Hours, 31 Minutes and 58 Seconds ]
[ Loads Done: 162 ]
[ Logs Chopped: 4536 ]
[ Levels Gained: 2 ]
[ Exp Gained: 306180 ]
[ Breaks: 9
will be posting another tomorrow
West7man
09-26-2009, 04:51 PM
This looks just great. I'm downloading this!
Any people got banned from runescape for using this?
----
My processor went crazy!!! T8100(laptop) It started to produce alot of heat...
lightcam999
09-26-2009, 09:40 PM
[ Ran For: 8 Hours, 8 Minutes and 23 Seconds ]
[ Loads Done: 105 ]
[ Logs Chopped: 2939 ]
[ Levels Gained: 1 ]
[ Exp Gained: 198382.5 ]
[ Breaks: 6
was playing other games so smart wasnt infront so wasnt working at its best
West7man
09-26-2009, 09:58 PM
[ Ran For: 1 Hours, 43 Minutes and 45 Seconds ]
[ Loads Done: 31 ]
[ Logs Chopped: 868 ]
[ Levels Gained: 0 ]
[ Exp Gained: 58590 ]
[ Breaks: 0 ]
Willow logs with lvl 72 wc
1 load per 3 minutes? is this normal?
pur3min
09-26-2009, 10:55 PM
Gets stuck by the trees for me :(
Coh3n
09-27-2009, 12:53 AM
The smart client went all white :(
oh and i gained a level before it went white, just didnt record it :(
1. The SMART screen sometimes goes white as a result from minimizing/restoring the client too much. If you can, try to refrain from minimizing it at all. That seems to work for me.
2. I'm guessing it clicked another tree as you gained a level, thus causing the chat message to disappear, but that's not a big deal. :)
Also, post your progress reports in PHP tags, instead of CODE tags. It just looks much better. :)
This looks just great. I'm downloading this!
Any people got banned from runescape for using this?
----
My processor went crazy!!! T8100(laptop) It started to produce alot of heat...
As far as I know no one has gotten banned using this script. Chances are you wont if you don't run it 24/7. Also, your laptop overheated when you ran this script? Sorry, I have no idea what would cause this problem. :confused:
[ ]
[ Ran For: 13 Hours, 31 Minutes and 58 Seconds ]
[ Loads Done: 162 ]
[ Logs Chopped: 4536 ]
[ Levels Gained: 2 ]
[ Exp Gained: 306180 ]
[ Breaks: 9
will be posting another tomorrow
Awesome reports. I'll add both of them to the first post. :)
1 load per 3 minutes? is this normal?
Well it depends on your woodcutting level, and which tree you're cutting, but I'd say 3 minutes seems pretty good, or is that slow? I'm not really sure.
__________________________________________________
Thanks to everyone who uses this script, I'm glad it's working well for you guys.
Cheers,
Coh3n
Gets stuck by the trees for me :(
Could you please be more specific? Does it just stop? What does it say in the debug box? More information would be helpful.
yettti
09-27-2009, 08:54 PM
Quick test...
Was looking for a good small woodcutter and now ive found 1
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 7 Minutes and 11 Seconds ]
[ Loads Done: 1 ]
[ Logs Chopped: 27 ]
[ Levels Gained: 1 ]
[ Exp Gained: 675 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
EDIT: New proggy
EDIT2: New better proggy (1 character!)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 3 Hours, 17 Minutes and 45 Seconds ]
[ Loads Done: 30 ]
[ Logs Chopped: 840 ]
[ Levels Gained: 19 ]
[ Exp Gained: 21000 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Coh3n
09-28-2009, 01:56 AM
That's great, I'm glad you found one to your liking. :D
Invaderzim-fx
09-28-2009, 04:00 AM
I get this error every time.
Line 5: [Error] (60:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files (x86)\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
Coh3n
09-28-2009, 04:02 AM
I get this error every time.
Line 5: [Error] (60:11): Unknown identifier 'SmartIsKeyDown' in script C:\Program Files (x86)\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
You have to move your plugins when you setup your SRL. If you're positive you've done this right, try updating your Java.
Bionicle
09-29-2009, 02:56 AM
OMG
ONE DAY strait, still going, only stopped 3 times in randoms. (i disabled smart and solved em)
guna post proggy at 24h, then another at 48 ect until it stops or i get banned >:) lol
so far:
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 24 Hours, 10 Minutes and 46 Seconds ]
[ Loads Done: 170 ]
[ Logs Chopped: 4587 ]
[ Levels Gained: 2 ]
[ Exp Gained: 309622.5 ]
[ Breaks: 10 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
AMAZING!
Coh3n
09-29-2009, 04:57 AM
Wow very nice bionicle! I'll add that to the first page.
Also, congrats on getting SRL Members! :D
Bionicle
09-29-2009, 05:09 AM
Wowm very nice bionicle! I'll add that to the first page.
Also, congrats on getting SRL Members! :D
ty :D but dont add it just yet, its still running! :p
yea froze due to lag an hour later lolz:
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 25 Hours, 16 Minutes and 12 Seconds ]
[ Loads Done: 179 ]
[ Logs Chopped: 4830 ]
[ Levels Gained: 2 ]
[ Exp Gained: 326025 ]
[ Breaks: 11 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Coh3n
09-29-2009, 09:02 AM
yea froze due to lag an hour later lolz
Meh, either way, still an unreal report. :D
Bionicle
09-29-2009, 09:04 AM
Meh, either way, still an unreal report. :D
cha at that.
if my computor wouldnt have run a virus scan at that time id bet it would have went for another whole day xD
guna run it again overnight. proggy in the mornin :p
Coh3n
09-29-2009, 09:05 AM
cha at that.
if my computor wouldnt have run a virus scan at that time id bet it would have went for another whole day xD
Lol maybe, but you don't want to get banned. :p
Most Fiction
09-29-2009, 11:17 AM
Lol maybe, but you don't want to get banned. :p
If one does not Push the limits, then why does one bot at all? :D
Imayer
09-29-2009, 09:00 PM
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 29 Minutes and 0 Seconds ]
[ Loads Done: 16 ]
[ Logs Chopped: 431 ]
[ Levels Gained: 6 ]
[ Exp Gained: 29092,5 ]
[ Breaks: 1 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
Gr8 script, unfortunately my computer shut down in the morning, so lost a litle bit longre proggy
fronty
09-30-2009, 01:02 AM
At first it worked like a dream, but then after one level up it opened skill advance guide, didn't close it and started to just move cursor between few spots and I had to restart it. I didn't see it open the guide, so I don't know did it try to close it too and failed because of some SRL problem.
Alaska
09-30-2009, 07:52 AM
This script runs amazingly so far for me. o.O
I have a horrible wireless signal, so this is the longest proggy I can get right now. I'll try getting a better one.
This is with 89 Wcing.
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 8 Minutes and 37 Seconds ]
[ Loads Done: 25 ]
[ Logs Chopped: 700 ]
[ Levels Gained: 0 ]
[ Exp Gained: 47250 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
Coh3n
10-01-2009, 04:57 AM
Awesome reports guys, and Fronty, make this function:
function Lv_LevelUp: Boolean;
begin
if not LoggedIn then Exit;
Result := FindNPCChatText('ongrat', Nothing) or FindNPCChatText('dvanced', Nothing) or
FindNPCChatText('ulatio', Nothing) or FindNPCChatText('oodcuti', Nothing);
if Result then
begin
Writeln('Congratulations, you have gained a Woodcutting level!');
ClickToContinue;
Wait(80 + Random(100));
HoverSkill('woodcutting', True);
Players[CurrentPlayer].Integers[11] := Players[CurrentPlayer].Integers[11] + 1;
S_FindRandoms;
end;
end;
Look like this:
function Lv_LevelUp: Boolean;
begin
if not LoggedIn then Exit;
Result := FindNPCChatText('ongrat', Nothing) or FindNPCChatText('dvanced', Nothing) or
FindNPCChatText('ulatio', Nothing) or FindNPCChatText('oodcuti', Nothing);
if Result then
begin
Writeln('Congratulations, you have gained a Woodcutting level!');
ClickToContinue;
Wait(80 + Random(100));
HoverSkill('woodcutting', True);
CloseWindow;
Players[CurrentPlayer].Integers[11] := Players[CurrentPlayer].Integers[11] + 1;
S_FindRandoms;
end;
end;
And let me know if that solves the problem.
Thanks everyone!
Coh3n
Bionicle
10-01-2009, 05:27 AM
Awesome reports guys
Thanks everyone!
Coh3n
still running from the last time i posted xD at 20 hours atm. :p
still goin :D havent even had to inturupt to fix a random yet!
(lol im so guna get banned)
Coh3n
10-01-2009, 08:34 AM
still running from the last time i posted xD at 20 hours atm. :p
still goin :D havent even had to inturupt to fix a random yet!
(lol im so guna get banned)
Lol that's nuts. I guess it's working pretty well for you. :p
I don't think I've seen someone auto so much without getting banned haha. You're on a roll. :rolleyes:
Bionicle
10-01-2009, 09:04 AM
Lol that's nuts. I guess it's working pretty well for you. :p
I don't think I've seen someone auto so much without getting banned haha. You're on a roll. :rolleyes:
'tanku! lol guna manually stop at 48 hours if it dosn't stop before :p
brentjuu
10-01-2009, 06:53 PM
how u choose a tree
problem help Found normal hatchet.
** Warning in Col_Trees: Error: String Not In DeclarePlayers**
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
YoHoJo
10-01-2009, 06:55 PM
how u choose a tree
this prob ** Warning in Col_Trees: Error: String Not In DeclarePlayers**
Look for the procedure "Declare Players" and make sure you have everything filled in for your character.
brentjuu
10-01-2009, 07:01 PM
Look for the procedure "Declare Players" and make sure you have everything filled in for your character.
thx for help :D
again something learned from u :cool::):p;)
btw sorry but its laggy
unplayable :o why is it SO laggy ?
fronty
10-01-2009, 09:06 PM
Coh3n: Works like a dream after that one additional call. Thanks!
brentjuu
10-01-2009, 09:25 PM
soz for double post but why is it SO laggy ?
Coh3n
10-02-2009, 06:01 AM
soz for double post but why is it SO laggy ?
Couldn't tell you. It works perfect for me and countless others. I've encountered a couple people that say it's laggy. You must be unlucky. :(
soz for double post but why is it SO laggy ?
Your computer is not very powerful.
Bionicle
10-02-2009, 06:45 AM
soz for double post but why is it SO laggy ?
it is extremely laggy, i have no idea why, but it is not a problem. the only time i is would be a problem is when it drops the inventory, but for sum reason, it stops lagging then.
look at my proggys, im gettin the same lag as you but it really isnt a problem xD
Alaska
10-02-2009, 07:34 AM
soz for double post but why is it SO laggy ?
Only reason I can think of would be your computer can't handle the SMART client. Is the bot the only thing running on your computer? Also could be your internet connection or the Rs server it's self is laggy for you.
brentjuu
10-02-2009, 03:55 PM
Only reason I can think of would be your computer can't handle the SMART client. Is the bot the only thing running on your computer? Also could be your internet connection or the Rs server it's self is laggy for you.
lolz im botting also whit rsbots autofighter and much more but thats not such laggy :p:D
calbe
10-02-2009, 06:46 PM
hey, looking forward to trying this out :)
will post a proggy soon :)
calbe
Bionicle
10-03-2009, 04:59 AM
forgot to post 48h proggy :o
here it is:
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 48 Hours, 3 Minutes and 45 Seconds ]
[ Loads Done: 365 ]
[ Logs Chopped: 9870 ]
[ Levels Gained: 3 ]
[ Exp Gained: 666225 ]
[ Breaks: 26 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
still running lmao
had to solve 5 randoms manually, but that has nothing to do with your script.
once again, great job xD
EDIT: and still not banned! LOL
moody
10-03-2009, 10:55 AM
i filled out declare players pressed run and it gave me this
Line 96: [Error] (151:197): Invalid number of parameters in script C:\Users\Moody\Desktop\scarprerelease\includes\SRL \SRL\Misc\SMART.SCAR
this is how the line looks like on the script i downloaded from u
SmartSetup('http://'+prefix+'.runescape.com/', 'plugin.js?param=o0,a' + IntToStr((Integer(not(Signed)) + 1) * Integer(not((SuperDetail and Signed)))) + ',m' + IntToStr(Integer(Members)), 765, 503);
iJake
10-03-2009, 07:02 PM
I get this error:
Line 301: [Error] (30530:1): Unknown identifier 'Runto' in script C:\Users\me\Downloads\AnywherePowerChopper V.8 LITE.scar
Alaska
10-03-2009, 09:19 PM
forgot to post 48h proggy :o
here it is:
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 48 Hours, 3 Minutes and 45 Seconds ]
[ Loads Done: 365 ]
[ Logs Chopped: 9870 ]
[ Levels Gained: 3 ]
[ Exp Gained: 666225 ]
[ Breaks: 26 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
still running lmao
had to solve 5 randoms manually, but that has nothing to do with your script.
once again, great job xD
EDIT: and still not banned! LOL
Well when botting the bans are usually delayed anywhere from a few weeks, to a month. I was doing the exact thing you are with a willow power chopper over by Port Sarim and I ended up getting to 97 Wc and I got banned. That happened a while ago.
Coh3n
10-03-2009, 10:35 PM
forgot to post 48h proggy :o
here it is:
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 48 Hours, 3 Minutes and 45 Seconds ]
[ Loads Done: 365 ]
[ Logs Chopped: 9870 ]
[ Levels Gained: 3 ]
[ Exp Gained: 666225 ]
[ Breaks: 26 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
still running lmao
had to solve 5 randoms manually, but that has nothing to do with your script.
once again, great job xD
EDIT: and still not banned! LOL
Uhm wow... just wow.
i filled out declare players pressed run and it gave me this
Line 96: [Error] (151:197): Invalid number of parameters in script C:\Users\Moody\Desktop\scarprerelease\includes\SRL \SRL\Misc\SMART.SCAR
this is how the line looks like on the script i downloaded from u
SmartSetup('http://'+prefix+'.runescape.com/', 'plugin.js?param=o0,a' + IntToStr((Integer(not(Signed)) + 1) * Integer(not((SuperDetail and Signed)))) + ',m' + IntToStr(Integer(Members)), 765, 503);
You have to move your plugins. See the guide in my signature if you don't know how.
I get this error:
Line 301: [Error] (30530:1): Unknown identifier 'Runto' in script C:\Users\me\Downloads\AnywherePowerChopper V.8 LITE.scar
I never use "Runto" in my script, and I didn't name my script AnywherePowershopper V.8 LITE. Unless you renamed it, it's not my script.
Saringe
10-04-2009, 11:47 AM
Hey, Im new to SCAR but not really new to macroing. I have a question. When I set everything up I don't get an error but when the SMART(At least I think thats what that screens called) screen comes up, after it loads 3d graphics it starts to blink and does not load. What should I do?
georgeh
10-04-2009, 08:32 PM
this i a good script but gets stopped by randoms which is anoying
Dynamite
10-04-2009, 08:36 PM
Stop spamming now.
Coh3n
10-05-2009, 04:28 AM
Hey, Im new to SCAR but not really new to macroing. I have a question. When I set everything up I don't get an error but when the SMART(At least I think thats what that screens called) screen comes up, after it loads 3d graphics it starts to blink and does not load. What should I do?
Hmm I'm not sure why that's happening, but I would just try restarting a few times and see what happens. You could also try stopping the script once the SMART screen comes up, and then rerunning it when it loads.
I hope that works for you,
Coh3n
mario97000
10-05-2009, 01:23 PM
the bot logs in looks at the equipment tab then logs out and says ** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
i think i have every thing filled out.. i updated everything in your how to install/setup guide says to if anyone can help thinks.
.
EDIT: fixed it.. i was putting illow for the tree :/ just shows how noobish i am I'll post a progress report when i can. again thanks for the script
Coh3n
10-06-2009, 04:43 AM
the bot logs in looks at the equipment tab then logs out and says ** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
i think i have every thing filled out.. i updated everything in your how to install/setup guide says to if anyone can help thinks.
Did it say that it didn't find your hatchet? That's the only thing I can think of why it would mess up. Make sure you have your hatchet equipped if this is true:
Booleans[0] := True;//Is hatchet equiped?
Hopefully that helps you out.
Cheers,
Coh3n
cookmaster0
10-06-2009, 09:26 AM
yay it works!
thx man i needed a good power chopper =P
NickRx91
10-06-2009, 02:12 PM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 40 Minutes and 1 Seconds ]
[ Loads Done: 32 ]
[ Logs Chopped: 864 ]
[ Levels Gained: 2 ]
[ Exp Gained: 58320 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
had to stop it for 3 randoms since it cant do it itself
the last one kept saying "Count: 0 Bug in P_GetScore!"
Coh3n
10-06-2009, 06:40 PM
yay it works!
thx man i needed a good power chopper =P
Thanks! :)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 40 Minutes and 1 Seconds ]
[ Loads Done: 32 ]
[ Logs Chopped: 864 ]
[ Levels Gained: 2 ]
[ Exp Gained: 58320 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
had to stop it for 3 randoms since it cant do it itself
the last one kept saying "Count: 0 Bug in P_GetScore!"
It said that in the last random? You should post that in the Public SVN under Randoms - Bugs, that way it'll help the people who are fixing the randoms solvers. :)
zuluguy
10-06-2009, 09:31 PM
Here is my second proggy for this script.
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 2 Hours, 12 Minutes and 19 Seconds ]
[ Loads Done: 41 ]
[ Logs Chopped: 1107 ]
[ Levels Gained: 0 ]
[ Exp Gained: 74722 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
rollin340
10-06-2009, 11:52 PM
It's pretty rare to see one that is updated as recent as this.
This, if you have the latest SCAR and SRL, works perfectly.
For those who can't even Log On, go the code and put in your username, password, short name, what type of tree you wish to cut, number of logs you wish to cut, weather your hatchet is equipped or not and if you want to take breaks.
The rest will take care by itself.
It'll cut and drop the Logs repeatedly.
Should be able to run for a week if I leave.
It has no real walking code, it has straight forward and direct orders. So you won't wander off.
Cut.
Drop.
Very nice code.
I'm not exactly new to this, but I'm not proficient in it either.
But this is nice, quick and simple code.
I like it.
mario97000
10-07-2009, 12:13 AM
do you have a non smart Version of this it laggs way to much with smart
edit: thanks a lot :)
Coh3n
10-07-2009, 03:40 AM
do you have a non smart Version of this it laggs way to much with smart
I'll upload one right now.
rollin340
10-07-2009, 09:12 AM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 42 Minutes and 39 Seconds ]
[ Loads Done: 10 ]
[ Logs Chopped: 270 ]
[ Levels Gained: 1 ]
[ Exp Gained: 18225 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Couldn't find trees, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
It didn't wander off.
It just decided to stop.
How did it not find the tree. xD
And darn the preset scripts, it doesn't always solve those random events.
It says it's solved, but you are still there! xD
Coh3n
10-07-2009, 08:43 PM
Hmm it's possible you lost connection, and when the new screen popped up, the script was still looking for trees.
klit rs
10-08-2009, 11:48 AM
Thanks man :)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 44 Minutes and 21 Seconds ]
[ Loads Done: 28 ]
[ Logs Chopped: 784 ]
[ Levels Gained: 1 ]
[ Exp Gained: 52920 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Coh3n
10-08-2009, 07:06 PM
Thanks man :)
Not a problem, glad it works for you! :) Just wondering, but what's "Klit RS"? Or is it just a joke? Lol.
rollin340
10-08-2009, 08:04 PM
All in all, it's a neat one.
Loses its value once you reach Level 60, but darn good to get there.
Great Willow-ing tool.
Coh3n
10-09-2009, 06:02 PM
Just so you guys know, I didn't update anything, I just re uploaded the current version as it didn't appear as an attachment for some reason. Thanks,
Coh3n
moody
10-09-2009, 11:11 PM
great bot works awesome only question is how would i change it from dropping logs to bank them. since i dont know how to script do you think you could tell me what to type and where?
Bionicle
10-09-2009, 11:14 PM
great bot works awesome only question is how would i change it from dropping logs to bank them. since i dont know how to script do you think you could tell me what to type and where?
nearly impossible with your level of scripting knowledge (no offence ment :p) you would need to add a bunch of new procedures/functions and it wouldnt be an 'Anywhere PowerChopper' anymore, because you could only make it bank at one bank. It would take quite a while to make this script a banking script :p sorry.
Tniffoc
10-10-2009, 02:06 AM
great bot works awesome only question is how would i change it from dropping logs to bank them. since i dont know how to script do you think you could tell me what to type and where?
Now that you're a junior member, you can access new scripts in the Junior Members Section. Some of these may be able to bank. Still, my best advice is to learn to make your own script. You won't be sorry (trust me ;) )
rollin340
10-10-2009, 02:18 AM
But trust me, making a Banking script is really complicated.
You have to look for a Symbol, a particular guy, Bank all items, walk back and repeat.
The whole procedure can get messy if you aren't well knowledgeable in SCar and SRL scripting.
Best to start out small by making Wood/Fish/Mine Scripts.
Coh3n
10-10-2009, 04:07 AM
nearly impossible with your level of scripting knowledge (no offence ment :p) you would need to add a bunch of new procedures/functions and it wouldnt be an 'Anywhere PowerChopper' anymore, because you could only make it bank at one bank. It would take quite a while to make this script a banking script :p sorry.
Lol, I said almost the exact same thing to him on MSN. :p
Now that you're a junior member, you can access new scripts in the Junior Members Section. Some of these may be able to bank. Still, my best advice is to learn to make your own script. You won't be sorry (trust me ;) )
You really wont! Learning SCAR made me eager to learn other programming languages, and now I want to be a computer engineer.
But trust me, making a Banking script is really complicated.
You have to look for a Symbol, a particular guy, Bank all items, walk back and repeat.
The whole procedure can get messy if you aren't well knowledgeable in SCar and SRL scripting.
Best to start out small by making Wood/Fish/Mine Scripts.
There's more than just that my man. And yes, it would be smart to start with a power skiller. :)
JoshsPC
10-10-2009, 01:47 PM
Is this still alive?
If it is awesome ill place a proggy up soon.
JoshsPC
Coh3n
10-10-2009, 03:39 PM
Is this still alive?
If it is awesome ill place a proggy up soon.
JoshsPC
Of course it is! Look at the dates of the last few posts... :p
Aaronator
10-10-2009, 09:44 PM
if (Length(TPA) < 5) then
begin
//Writeln('Length inside box: ' + IntToStr(Length(TPA)));
Result := True;
end;
inside Cut_Tree Down ->
if (Length(TPA) < 5) then
Result := True;
inside of cut_ChopTrees near the end
end else
begin
//SRL_Warn('Cut_ChopTrees', 'Error Finding Tree Uptext. ', warn_AllVersions);
MakeCompass('E');
end;
->
end else
MakeCompass('E');
There is tons of more occurrences of this, Does not effect anything so there is no need to fix it. :) Just felt like point that out for the next script you decide to do. :p
Other then that i see no problems. This script is well written, Good Job.
http://img82.imageshack.us/img82/6237/sealofapproval.jpg
Lol'd
Coh3n
10-11-2009, 02:24 PM
Haha nice seal of approval. ;) And yeah I know I have those needless being..end nests. That's because if I need to use the commented part for debugging, I don't have to write the nest in again, I just uncomment the line. :)
getslotownlost
10-15-2009, 01:54 AM
Looks good, going to test now
tofurocks
10-18-2009, 12:01 AM
Just started using SCAR, first script I tested. Seems very nice. Will post proggress reports if I choose to stay with it ;)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 33 Minutes and 5 Seconds ]
[ Loads Done: 36 ]
[ Logs Chopped: 972 ]
[ Levels Gained: 0 ]
[ Exp Gained: 65610 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
stefuck
10-18-2009, 10:15 AM
damn mate it works perfect i forgot to copy my proggy next time il post it for u
i ran it for 6 hours and 30 mins.
it was 78 loads done and like 150k exp gained
6 breaks
Zerghunter3000
10-18-2009, 03:31 PM
I have a Question, umm how do you actually get it to show a progress report? o.o
Bionicle
10-18-2009, 03:36 PM
I have a Question, umm how do you actually get it to show a progress report? o.o
it should do it automatically in the debug box. if not, then you must have done somthing to it :p
try scrolling up in your debug box, i dont think coh3n used a single 'ClearDebug' in his script so there should be one there.
(debug box is the box on the bottom of the scar screen if you didn't know :p)
Zerghunter3000
10-18-2009, 03:55 PM
no, i mean how would i add that into my script i meant
Bionicle
10-18-2009, 04:11 PM
no, i mean how would i add that into my script i meant
oh.
make a procedure called 'ProgressReport'.
then add a whole bunch of WriteLn functions.
then call ProgressReport any time in your script.
This is very simple, but if you need anything like + TimeRunning or w/e, look up a tutorial.
Dynamite
10-18-2009, 04:29 PM
Check my ProWoodcutter for an advanced progress report.
But if you would like a less advanced one look at tuts as bionicle said :)
zionz
10-18-2009, 04:50 PM
Anywhere Powerchopper V.1.8!
Loading, please wait...
SRL Compiled in 16 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
Creating the NickTPA.
Found normal hatchet.
Inventory full, dropping logs...
Cut desired number of logs, logging out.
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 5 Minutes and 0 Seconds ]
[ Loads Done: 1 ]
[ Logs Chopped: 28 ]
[ Levels Gained: 0 ]
[ Exp Gained: 1890 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
I noticed that errrr..... yeah.. after it fills up inv.. it just logs out for no reason... lol?? Ok i payed more attention, i set it from 000 logs to be cut to 3000. LOL
Tresscross
10-18-2009, 04:59 PM
wow dude, epic autoer, hope you make a fishing one X D
zionz
10-18-2009, 05:05 PM
I want a fishing one too sooo bad!
kevinconklin
10-18-2009, 05:11 PM
it works!
tofurocks
10-18-2009, 05:51 PM
I want a fishing one too sooo bad!
Look at the other scripts in the "Free for All Script" section. There are a bunch.
tabernacle
10-18-2009, 05:57 PM
imj getting this error whats wrong
Line 47: [Error] (375:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.21\includes\SRL
Bionicle
10-18-2009, 05:59 PM
imj getting this error whats wrong
Line 47: [Error] (375:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.21\includes\SRL
do u have SRL downloaded? lol
tabernacle
10-18-2009, 06:03 PM
yea i checked....im fgoing to file download srl and the includes....is there something else i shouldve done?
Bionicle
10-18-2009, 06:05 PM
yea i checked....im fgoing to file download srl and the includes....is there something else i shouldve done?
nope, thats it. most scripts wont run without SRL downloaded.
tabernacle
10-18-2009, 06:14 PM
if im going to be chopping normal trees do i enter trees or normal?
tofurocks
10-18-2009, 06:30 PM
if im going to be chopping normal trees do i enter trees or normal?
I think it's just "tree".
Look through the script and see what it reads it as.
Coh3n
10-18-2009, 08:10 PM
I have a Question, umm how do you actually get it to show a progress report? o.o
Yes, like Bionicle said, you can be as creative as you want using Writeln commands, and functions like Inc, IncEx, and some more advanced techniques for multiplayer. I'm sure there's a tutorial on it. Progress reports is one of the things I would really like to add to my scripting tutorial, but I need to get time first. :p
I noticed that errrr..... yeah.. after it fills up inv.. it just logs out for no reason... lol?? Ok i payed more attention, i set it from 000 logs to be cut to 3000. LOL
Haha you aren't the first person to do that. :duh:
wow dude, epic autoer, hope you make a fishing one X D
Sorry, but I don't see that happening for a long while. :(
imj getting this error whats wrong
Line 47: [Error] (375:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.21\includes\SRL
Make sure you SRL is up to date.
I think it's just "tree".
Look through the script and see what it reads it as.
That's correct. What you put in DeclarePlayers is also used as an uptext check, so you will want to put the actual name of the tree. :)
____________________________
To everyone else, I'm glad you like it and it's working well for you! :D
Keep the progress reports coming!
xxshafaxx
10-19-2009, 03:47 AM
yo its good like it works for long but when it checks my stats and click on the toolbar to scroll down it keeps doing it for a period of time or like wen i lv and it click the thing it doesnt exit why not?
Tresscross
10-19-2009, 10:17 PM
Line 1: [Error] (1:1): Unexpected end of file in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
Please and Thanks,
Tresscross
victoryn
10-20-2009, 10:30 AM
Line 1: [Error] (1:1): Unexpected end of file in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
Please and Thanks,
Tresscross
That error doesn't come from the woodcutting script. It's a problem with the SMART plugin. I had a similar problem trying to get this running. I found that the Reflection enabled SMART plugin was buggy and wasn't letting the script compile and run. If you've using the reflection SMART you'll need to remove it with the one without reflection. Some scripts use the reflection method and probably won't work for you anymore, but it seems with the new Runetek 5 engine reflection is broken anyway.
Coh3n
10-20-2009, 09:46 PM
yo its good like it works for long but when it checks my stats and click on the toolbar to scroll down it keeps doing it for a period of time or like wen i lv and it click the thing it doesnt exit why not?
Does it do this every time? Or just sometimes?
That error doesn't come from the woodcutting script. It's a problem with the SMART plugin. I had a similar problem trying to get this running. I found that the Reflection enabled SMART plugin was buggy and wasn't letting the script compile and run. If you've using the reflection SMART you'll need to remove it with the one without reflection. Some scripts use the reflection method and probably won't work for you anymore, but it seems with the new Runetek 5 engine reflection is broken anyway.
You're right.
Tresscross
10-20-2009, 10:13 PM
That error doesn't come from the woodcutting script. It's a problem with the SMART plugin. I had a similar problem trying to get this running. I found that the Reflection enabled SMART plugin was buggy and wasn't letting the script compile and run. If you've using the reflection SMART you'll need to remove it with the one without reflection. Some scripts use the reflection method and probably won't work for you anymore, but it seems with the new Runetek 5 engine reflection is broken anyway.
1: What do you mean, like i have to get a diffrent reflection, or delete it (if so how?)
2 I dont play Runetek, i pla runescape (lol)
:cartman:
Please as i see your on voctoryn, msn chat w/ me im tezloko@live.com
Please and Thanks
Tresscross
Bionicle
10-20-2009, 10:17 PM
1: What do you mean, like i have to get a diffrent reflection, or delete it (if so how?)
2 I dont play Runetek, i pla runescape (lol)
:cartman:
Please as i see your on voctoryn, msn chat w/ me im tezloko@live.com
Please and Thanks
Tresscross
Runetrek is runescape.....its the runescape graphics...and no you just need to update your srl
Tresscross
10-20-2009, 10:18 PM
where is the new one, and how do i do it, sorry i join a few days ago and i havnt had time to do it.
Please and Thanks
Tresscross
Bionicle
10-20-2009, 10:20 PM
where is the new one, and how do i do it, sorry i join a few days ago and i havnt had time to do it.
Please and Thanks
Tresscross
open scar, go file, update srl.
Tresscross
10-20-2009, 10:21 PM
mean download, and when im done ill rep you xD
EDIT: Loading, please wait...
SRL Compiled in 15 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
[Runtime Error] : Exception: Access violation at address 697D4D39 in module 'Embedded_SMART.dll'. Read of address 00000000 in line 96 in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
Bionicle
10-20-2009, 10:27 PM
mean download, and when im done ill rep you xD
EDIT: Loading, please wait...
SRL Compiled in 15 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
[Runtime Error] : Exception: Access violation at address 697D4D39 in module 'Embedded_SMART.dll'. Read of address 00000000 in line 96 in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
have you moved your plugins?
Tresscross
10-20-2009, 10:29 PM
what do you mean, okok, go on msn, its much faster, mines tezloko@live.com, ill get your thoruogh ur profile
Coh3n
10-20-2009, 10:31 PM
1: What do you mean, like i have to get a diffrent reflection, or delete it (if so how?)
2 I dont play Runetek, i pla runescape (lol)
:cartman:
Please as i see your on voctoryn, msn chat w/ me im tezloko@live.com
Please and Thanks
Tresscross
Runetek 5 is the RuneScape graphics update that occurred weeks ago. Reflection has been broken ever since. There are two version of SMART.dll files - one from SRL and one from Reflection. If you happen to use my guide on setting up SRL, when you get reflection, you are told to move your plugins again. Just forget that step and you should be fine. I'll update that guide right now.
Bionicle
10-20-2009, 10:31 PM
k i dont have time cause i gota get off. just go to:
C:\Program Files\SCAR 3.21\Includes\srl\place inside plugins folder
and copy/move all of those files to:
C:\Program Files\SCAR 3.21\Plugins
now try.
if you dont use windows, just go to wherever the SCAR program file is.
Tresscross
10-20-2009, 10:35 PM
gaaaaaahhhh!, its not working!!!!! gahhhhh!!!!!!!!!! im may ge w/ rsbots.net if i can get a few free skiller bots( idc if mem)
victoryn
10-20-2009, 10:40 PM
k i dont have time cause i gota get off. just go to:
C:\Program Files\SCAR 3.21\Includes\srl\place inside plugins folder
and copy/move all of those files to:
C:\Program Files\SCAR 3.21\Plugins
now try.
if you dont use windows, just go to wherever the SCAR program file is.
Thats pretty much spot on for what you need to do.
Coh3n has an excellent guide on setting up SCAR with SRL and SMART over at http://www.villavu.com/forum/showthread.php?t=47714 that I highly recommend you have a look at.
Using his method of setting it up is a bit more complicated than just downloading the installer from freddy1990's website but it guarantees you the most up to date versions of both SCAR, SRL and SMART (Also the Installer version isn't playing nice with Win7, at least forme). Ignore the part about reflection though since that's not working.
Runetek5 is the engine that Runescape uses. Not a different game entirely.
Seeing as I'm newly registered (I'm not even a Junior Member here yet) I don't think I'm experienced enough with all this software yet to actually be able to walk you through this on IM. I just picked this up yesterday so its all fresh and new to me. I just happen to search and read a lot.
Coh3n
10-20-2009, 10:44 PM
Thats pretty much spot on for what you need to do.
Coh3n has an excellent guide on setting up SCAR with SRL and SMART over at http://www.villavu.com/forum/showthread.php?t=47714 that I highly recommend you have a look at.
Using his method of setting it up is a bit more complicated than just downloading the installer from freddy1990's website but it guarantees you the most up to date versions of both SCAR, SRL and SMART (Also the Installer version isn't playing nice with Win7, at least forme). Ignore the part about reflection though since that's not working.
Runetek5 is the engine that Runescape uses. Not a different game entirely.
Seeing as I'm newly registered (I'm not even a Junior Member here yet) I don't think I'm experienced enough with all this software yet to actually be able to walk you through this on IM. I just picked this up yesterday so its all fresh and new to me. I just happen to search and read a lot.
Rep+. More people need to be like you when they first join.
Bionicle
10-20-2009, 10:56 PM
Rep+. More people need to be like you when they first join.
I agree. Rep from me too! and yea it was on the spot, i had to jump in the shower :p good eye ;) lol
victoryn
10-20-2009, 11:02 PM
Thanks for that guys. :)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 2 Hours, 7 Seconds ]
[ Loads Done: 29 ]
[ Logs Chopped: 783 ]
[ Levels Gained: 6 ]
[ Exp Gained: 52852.5 ]
[ Breaks: 1 ]
[ ]
Woodcutting at level 50 now. Started using the powerchopper at 40. Very happy with it.
Tresscross
10-21-2009, 12:30 AM
omgomgomg i got it!!! its going on as i type!!!!! i am reping u 3
Coh3n
10-21-2009, 01:16 AM
Thanks for that guys. :)
Woodcutting at level 50 now. Started using the powerchopper at 40. Very happy with it.
No problem! I'm glad you're happy with it!
omgomgomg i got it!!! its going on as i type!!!!! i am reping u 3
Yay! Glad you got it working! :D
Tresscross
10-21-2009, 01:30 AM
k, it got me 12 levels in an hour (cutting oaks at lvl 15)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hour, 3 Seconds ]
[ Loads Done: 5 ]
[ Logs Chopped: 137 ]
[ Levels Gained: 12 ]
[ Exp Gained: Accidenly deleted ]
[ Breaks: 0 ]
[ ]
Coh3n
10-21-2009, 01:41 AM
k, it got me 12 levels in an hour (cutting oaks at lvl 15)
Awesome! Happy to see you are satisfied. :)
Tresscross
10-21-2009, 01:55 AM
:) Also in maybe a week or two you want to team up to try to make a fishing script? (ill do like 75% becasue it would be my 1st script) Many people would love it as there arnt many fishing scripts out there.
And if it is possible can you make a little more antiban, like a misclick on the ground then click back on the tree, it would make it less knoticeable. ;)
Coh3n
10-21-2009, 01:57 AM
:) Also in maybe a week or two you want to team up to try to make a fishing script? (ill do like 75% becasue it would be my 1st script) Many people would love it as there arnt many fishing scripts out there.
And if it is possible can you make a little more antiban, like a misclick on the ground then click back on the tree, it would make it less knoticeable. ;)
Sorry, but I don't have time to team up with anyone. I would be glad to answer any questions you do have when I have time. As for the antiban, you can make it antiban as much as you want, just modify the procedure. ;)
ohhowmuchilovescripts
10-21-2009, 02:11 AM
Sorry I'm kind of new to this stuff so excuse me if my questions are really stupid.
When I run the non-smart script it doesn't do anything. However, it says everything is normal as in everything compiled successfully and the script is running.
I filled in the player information for player 0 and installed scar and svn exactly to your guide.
Do you have any idea of the problem I'm having? Thanks.
victoryn
10-21-2009, 02:39 AM
Before you run the script you need to have Runescape open in any browser of your choice (You don't need to login though, the script will do that for you). Then in Scar drag the crosshair icon to the Runescape client that you have open. This will tell Scar where the actual Runescape game window is. Then you run the script and everything should work as it should. Using the non-SMART version means that whatever you do with you keyboard and mouse will interrupt script's actions as it will be using your mouse and keyboard.
Coh3n
10-21-2009, 03:11 PM
Before you run the script you need to have Runescape open in any browser of your choice (You don't need to login though, the script will do that for you). Then in Scar drag the crosshair icon to the Runescape client that you have open. This will tell Scar where the actual Runescape game window is. Then you run the script and everything should work as it should. Using the non-SMART version means that whatever you do with you keyboard and mouse will interrupt script's actions as it will be using your mouse and keyboard.
Yes, exactly. I recommend using the SMART version since you are new. This way, you don't have to have another RS window open, and you can still use your computer while SCAR is running.
Cigue
10-21-2009, 04:57 PM
The script looks good, however I can't get it to work on normal trees. Can it do that?
Coh3n
10-21-2009, 07:35 PM
The script looks good, however I can't get it to work on normal trees. Can it do that?
Yes, it can. Make sure you put 'tree' in DeclarePlayers. Not 'normal', 'trees', 'normal tree', etc.
Tresscross
10-21-2009, 10:46 PM
[============================= V.1.8 =============================]
[ ]
[ Ran For: 24 Minutes and 36 Seconds ]
[ Loads Done: 6 ]
[ Logs Chopped: 162 ]
[ Levels Gained: 2 ]
[ Exp Gained: 10935 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Lol, ittl be better, i g2g and ll leave it on for maybe 5 hours X D
Coh3n
10-22-2009, 12:19 AM
Lol, ittl be better, i g2g and ll leave it on for maybe 5 hours X D
Should work pretty well. :)
Tresscross
10-22-2009, 12:33 AM
ok, i stop because it didnt get the freaky forester, it Xed out beacause it didnt chose the $ tailed one. it only ran for like 5 min >:(
Coh3n
10-22-2009, 12:34 AM
ok, i stop because it didnt get the freaky forester, it Xed out beacause it didnt chose the $ tailed one. it only ran for like 5 min >:(
Wow, that's just plain unlucky.
Tresscross
10-22-2009, 12:49 AM
on another time i was like on a gameshow accecpt it was all black that the script didnt do, man im unlucky
babzy
10-22-2009, 12:54 AM
Include file C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR does not exist.
Include file C:\Program Files\SCAR 3.21\includes\SRL\SRL.scar does not exist.
Failed when compiling
thats what i get can anyone help, im new to this....And does this thing bank logs too? im trying to get familiar with scar.. ive hacked/botted in other games so i can follow instructions : )
Tresscross
10-22-2009, 12:55 AM
lol, i was stuck at this to, you need to move your plugins, i think or update you java.
here is co3hns guide: http://www.villavu.com/forum/showthread.php?p=600983#post600983
and i drops, not banks, i want it to bank thou xD
babzy
10-22-2009, 01:44 AM
but is there a way to bank?
Tresscross
10-22-2009, 01:47 AM
if you have an advance knowlage of scar scripting, then yes
l0l
Coh3n
10-22-2009, 03:56 PM
Include file C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR does not exist.
Include file C:\Program Files\SCAR 3.21\includes\SRL\SRL.scar does not exist.
Failed when compiling
thats what i get can anyone help, im new to this....And does this thing bank logs too? im trying to get familiar with scar.. ive hacked/botted in other games so i can follow instructions : )
You need to download SRL and SMART. You can refer to both my guides on those subjects.
but is there a way to bank?
If course. You can either learn how to script yourself, or wait until you become a Jr. Member and you'll have access to limited banking scripts.
zionz
10-23-2009, 01:38 AM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 3 Minutes and 36 Seconds ]
[ Loads Done: 1 ]
[ Logs Chopped: 28 ]
[ Levels Gained: 0 ]
[ Exp Gained: 1890 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Inventory full, dropping logs...
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 6 Minutes and 38 Seconds ]
[ Loads Done: 2 ]
[ Logs Chopped: 56 ]
[ Levels Gained: 0 ]
[ Exp Gained: 3780 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Inventory full, dropping logs...
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 10 Minutes and 6 Seconds ]
[ Loads Done: 3 ]
[ Logs Chopped: 84 ]
[ Levels Gained: 0 ]
[ Exp Gained: 5670 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 39 Minutes and 25 Seconds ]
[ Loads Done: 13 ]
[ Logs Chopped: 364 ]
[ Levels Gained: 0 ]
[ Exp Gained: 24570 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Inventory full, dropping logs...
Successfully executed
I Ran it last night for awhile, hoping for 3000 logs, only got to 1006 because a random stopped it, was the bone graveyard one. Sometimes this bot looks at all the willows and doesn't chop... I guess this is a good thing.. could be an anti-ban thing i guess....
Coh3n
10-23-2009, 01:49 AM
I Ran it last night for awhile, hoping for 3000 logs, only got to 1006 because a random stopped it, was the bone graveyard one. Sometimes this bot looks at all the willows and doesn't chop... I guess this is a good thing.. could be an anti-ban thing i guess....
Sometimes it doesn't detect the UpText properly, so that's what causes that problem. Nothing really I can do about that, but I'm glad everything else works well for you. :)
zionz
10-23-2009, 02:00 AM
Sometimes it doesn't detect the UpText properly, so that's what causes that problem. Nothing really I can do about that, but I'm glad everything else works well for you. :)
Well i think the fact that he stands there and doesn't do anything for awhile would be good for anti-ban... players wouldn't suspect you.. probably something you should think about doing.. like giving players the option to have their player sit there for about 3-15 seconds
Coh3n
10-23-2009, 02:02 AM
Well i think the fact that he stands there and doesn't do anything for awhile would be good for anti-ban... players wouldn't suspect you.. probably something you should think about doing.. like giving players the option to have their player sit there for about 3-15 seconds
Not a bad idea actually. Most people would say that's bannable, but back when I trained woodcutting legit, I would browse the internet, and my character would stop chopping for a bit. It's very common now that I think about it.
zionz
10-23-2009, 02:07 AM
Not a bad idea actually. Most people would say that's bannable, but back when I trained woodcutting legit, I would browse the internet, and my character would stop chopping for a bit. It's very common now that I think about it.
Indeed, I always browse the net.. youtube, guides, msn and all sorts.. If i see some one being anti-social and cutting logs like a mad man as fast as possible not even breaking or standing idle for awhile.. I'd instantly suspect a botter.
Coh3n
10-23-2009, 02:09 AM
Indeed, I always browse the net.. youtube, guides, msn and all sorts.. If i see some one being anti-social and cutting logs like a mad man as fast as possible not even breaking or standing idle for awhile.. I'd instantly suspect a botter.
Yeah, I always thought the standing still was a bad thing, but you've convinced me otherwise. :)
zionz
10-23-2009, 02:12 AM
Yeah, I always thought the standing still was a bad thing, but you've convinced me otherwise. :)
Glad to be of help, I enjoy using this script. It's gotten me a few levels.
Coh3n
10-23-2009, 02:13 AM
Glad to be of help, I enjoy using this script. It's gotten me a few levels.
That's good to hear. It's always nice to know you're work is being appreciated. :)
zionz
10-23-2009, 02:17 AM
That's good to hear. It's always nice to know you're work is being appreciated. :)
Hehe no worries, I'll give you more progress reports and ideas etc in the near future. I eventually want to try scripting myself.... I want to make a fire making script..
Coh3n
10-23-2009, 02:18 AM
Hehe no worries, I'll give you more progress reports and ideas etc in the near future. I eventually want to try scripting myself.... I want to make a fire making script..
Good to know you want to learn. Check out my scripting guide, you'll be able to make a Fire Maker easily after that. :)
zionz
10-23-2009, 02:21 AM
Good to know you want to learn. Check out my scripting guide, you'll be able to make a Fire Maker easily after that. :)
Ok I'll give it a look over and try out my uber micro xD I'll make videos of me testing my script and I'll give you my coding so you can look it over and help me xD.
Coh3n
10-23-2009, 02:22 AM
Ok I'll give it a look over and try out my uber micro xD I'll make videos of me testing my script and I'll give you my coding so you can look it over and help me xD.
Sounds good. You can also look in the scripting help section. I know JAD made a thread where he's willing to completely look over someone's script and give them pointers, so I'm sure he'll be able to help you out also. :)
Illidus
10-23-2009, 08:11 PM
Hello I attempted to use your script for around 3 hours last night to no avail. I followed your guide to setting up TortoiseSVN and using it to download SCAR and the moving the folder over and everything. I had to move it over several times to get it too worked. After it finally compiled It says successfully compiled and moves to my Runescape window and then doesn't do anything more. I've read around a lot and have decided to finally post about it. Also It I have been reading about SMART not working any longer and have been using the non-smart version. So I am just looking for some advice or keywords to search for to try and get things to work. I'm new to SCAR and will take a look at your scripting guides also. Thanks in advance, Illidus
victoryn
10-23-2009, 08:35 PM
Before running the script have you made sure to target your Runescape browser window?
Before you run the script you need to have Runescape open in any browser of your choice (You don't need to login though, the script will do that for you). Then in Scar drag the crosshair icon to the Runescape client that you have open. This will tell Scar where the actual Runescape game window is. Then you run the script and everything should work as it should. Using the non-SMART version means that whatever you do with you keyboard and mouse will interrupt script's actions as it will be using your mouse and keyboard.
Also SMART works. I'm using it right now. As long as you're using the regular SMART and not the one with reflection.
Coh3n
10-23-2009, 09:06 PM
Hello I attempted to use your script for around 3 hours last night to no avail. I followed your guide to setting up TortoiseSVN and using it to download SCAR and the moving the folder over and everything. I had to move it over several times to get it too worked. After it finally compiled It says successfully compiled and moves to my Runescape window and then doesn't do anything more. I've read around a lot and have decided to finally post about it. Also It I have been reading about SMART not working any longer and have been using the non-smart version. So I am just looking for some advice or keywords to search for to try and get things to work. I'm new to SCAR and will take a look at your scripting guides also. Thanks in advance, Illidus
Yeah, the only thing I can think of is you didn't drag your crosshairs over the RS window, but you said that it moved to you RS window, so that theory doesn't really make sense.
Did you fill out the DeclarePlayers properly? I don't see why that would be a problem, but you never know.
Illidus
10-23-2009, 11:35 PM
Thanks for the help guys I finally got it too work. I tried out the smart version and after restarting it a few times it worked. I had also forgotten to open scar in administrator mode which I think must have had something to do with it. ^^
zionz
10-24-2009, 02:57 AM
Thanks for the help guys I finally got it too work. I tried out the smart version and after restarting it a few times it worked. I had also forgotten to open scar in administrator mode which I think must have had something to do with it. ^^
Yeah that's a simple but very annoying smart glitch. It'll sometimes just go plain white for no apparent reason. Sometimes the SCAR program will conflict with S.M.A.R.T and it'll just scitz out and not do anything, simply just disable smart, stop the program and click play again, or just close smart stop the script, then hit play, till it eventually works, if it doesn't then close the whole lot together and try again. if all fails, just play normal xD.
Coh3n
10-24-2009, 02:59 AM
Thanks for the help guys I finally got it too work. I tried out the smart version and after restarting it a few times it worked. I had also forgotten to open scar in administrator mode which I think must have had something to do with it. ^^
No problem, I'm glad to see you got it working. :)
Illidus
10-24-2009, 07:25 PM
Awesome it has been working like a charm thanks a bunch! I will rep you if it's possible. I have one question though. I have just had it running in the background and checking it every couple minutes and have noticed that I will sometimes disconnect from runescape and I always just disable smart for a moment and re login and it works again but my question is if i were to leave at the reconnect menu does it happen to detect this after a while or does it entirely screw up the script? Thanks again and heres my current progress report...
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 3 Hours, 8 Minutes and 19 Seconds ]
[ Loads Done: 29 ]
[ Logs Chopped: 783 ]
[ Levels Gained: 5 ]
[ Exp Gained: 52852.5 ]
[ Breaks: 2 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
Coh3n
10-24-2009, 09:00 PM
Awesome it has been working like a charm thanks a bunch! I will rep you if it's possible. I have one question though. I have just had it running in the background and checking it every couple minutes and have noticed that I will sometimes disconnect from runescape and I always just disable smart for a moment and re login and it works again but my question is if i were to leave at the reconnect menu does it happen to detect this after a while or does it entirely screw up the script? Thanks again and heres my current progress report...
Thanks for the input, and for the progress report, I'm glad it's working for you. As for you question - as far as I know, it will mess up the script, but I'm not 100% sure about that. You can always just leave it when that happens, and check. Sorry I don't know more.
Cheers,
Coh3n
zionz
10-25-2009, 04:42 AM
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 2 Hours, 17 Minutes and 28 Seconds ]
[ Loads Done: 42 ]
[ Logs Chopped: 1176 ]
[ Levels Gained: 0 ]
[ Exp Gained: 79380 ]
[ Breaks: 1 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Taking a 15 minute break.'
Just another day of power cutting
rogan
10-25-2009, 08:13 AM
looks cool, but i keep getting this: Didn't find hatchet, logging out.
when my bronze hatchet is equipped. ( its for my gmaul pure, using wcing as money making from 1, ive legitimaly gained all my combat stats ( 60 str 50 att 70 range/mage 52 pray) so dont say im a leech for botting at lvl 1 wc XS ) i mined bfore.
Coh3n
10-25-2009, 02:26 PM
looks cool, but i keep getting this: Didn't find hatchet, logging out.
when my bronze hatchet is equipped. ( its for my gmaul pure, using wcing as money making from 1, ive legitimaly gained all my combat stats ( 60 str 50 att 70 range/mage 52 pray) so dont say im a leech for botting at lvl 1 wc XS ) i mined bfore.
Lol, I wouldn't say that. :p
Anyway, is the Bronze Hatchet handle different from the other types of hatchets? Because the DTM I use is of the handle. They used to all be the same, but it could have changed.
If it's the same as the others, it should work.
very good script, I love it. Def. worth it 1-60.
fight4king
10-28-2009, 12:46 PM
Work very good till it start lagging and disconnect, will try to modify it to reduce lag and get better result. Thank you very much.
Coh3n
10-30-2009, 11:24 AM
Work very good till it start lagging and disconnect, will try to modify it to reduce lag and get better result. Thank you very much.
That's most likely your internet/computer. I've never had problems with lag using this script.
Alek000
10-30-2009, 11:26 AM
Really nice script Cohan, I am running it now on a new character and it's running perfectly.
Bionicle
10-30-2009, 10:06 PM
stop making spam posts rawr. sure way to get suspended after a while.
post those proggys!
Orrealis
10-31-2009, 10:55 PM
i want to have it, but i just cant use it :( its sounds so great, but its impossible to use?! <.<=(
Coh3n
10-31-2009, 11:46 PM
i want to have it, but i just cant use it :( its sounds so great, but its impossible to use?! <.<=(
Lol it's actually very easy to use. Why don't you tell us what your problem is and we can try to help you.
Orrealis
11-01-2009, 09:18 AM
Look, i doesn't know what im doin wrong <.< but when i start it. it just walks away a bit, and ---> you walked out of direction error bla bla bla, and i doesn't understand what happens? :( :)
Coh3n
11-05-2009, 04:33 PM
Look, i doesn't know what im doin wrong <.< but when i start it. it just walks away a bit, and ---> you walked out of direction error bla bla bla, and i doesn't understand what happens? :( :)
That's not exactly that helpful. There are a lot of error messages in my script. If you copied/pasted the error, it would be a lot easier for me to help you. Information like where you're chopping and what tree you're trying to cut would be very helpful.
Thanks,
Coh3n
zionz
11-06-2009, 04:39 AM
84 woodcut now cause of cohen, almost 85, Can't wait. Then i can cut mage logs fast hehe wooo!
Coh3n
11-06-2009, 11:40 AM
84 woodcut now cause of cohen, almost 85, Can't wait. Then i can cut mage logs fast hehe wooo!
Haha I'm glad you like it, and congrats on the levels. :)
zionz
11-06-2009, 11:42 AM
Yeah 85 now.
zionz
11-09-2009, 03:20 PM
And now 88 LOL almost 89. Anyway cohen i just got this message I'm guessing cause of the update?
SRL Compiled in 0 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
Isshkin
Creating the NickTPA.
Didn't find hatchet, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
Coh3n
11-09-2009, 05:44 PM
And now 88 LOL almost 89. Anyway cohen i just got this message I'm guessing cause of the update?
SRL Compiled in 0 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.
Isshkin
Creating the NickTPA.
Didn't find hatchet, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
Were the hatchets updated or something? If so, the DTM won't work anymore.
Alaska
11-10-2009, 04:01 AM
Thanks man. I started using this at 89 Woodcut.
http://i33.tinypic.com/r8wod4.png
Loading, please wait...
SRL Compiled in 15 msec
SMART Initialized.
Loaded: Server 171, Members: False, Signed: True, Super Detail: False.
--------
Creating the NickTPA.
Didn't find hatchet, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
Yeah i got this too, i thought i didn't put in the settings correctly at first..
Coh3n
11-17-2009, 03:59 PM
Loading, please wait...
SRL Compiled in 15 msec
SMART Initialized.
Loaded: Server 171, Members: False, Signed: True, Super Detail: False.
--------
Creating the NickTPA.
Didn't find hatchet, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
Yeah i got this too, i thought i didn't put in the settings correctly at first..
Oh sorry, I should have mentioned that the DTM doesn't work anymore. I'll upload a new version right now.
xlawlerx
11-17-2009, 08:16 PM
I have some problems with v.1.9. After filling whole backpack SCAR shows error:
Inventory full, dropping logs...
** Warning in Cut_DropLogs: Error Finding DTM: 'Logs'. **
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed
Coh3n
11-17-2009, 08:18 PM
I have some problems with v.1.9. After filling whole backpack SCAR shows error:
Okay thanks, I just have to remake the DTM for the logs. I'll upload a new version as soon as I can.
crezzur
11-19-2009, 06:16 PM
using it works good thx
Jouman
11-23-2009, 01:10 PM
Didn't work at first, was probably because of my computer since the smart screen just went black.
Working good after i restarted though, good job (Y)
Coh3n
11-23-2009, 03:40 PM
Didn't work at first, was probably because of my computer since the smart screen just went black.
Working good after i restarted though, good job (Y)
Thanks, and thanks for using. :smile:
xlawlerx
11-24-2009, 12:20 PM
As I see script is working for others. Any ideas what can be wrong with mine ? I still get that DTM error after filling whole inventory. I have everything updated. Tested on willows and oaks.
Coh3n
11-24-2009, 03:52 PM
As I see script is working for others. Any ideas what can be wrong with mine ? I still get that DTM error after filling whole inventory. I have everything updated. Tested on willows and oaks.
I'm not sure why this is happening? Are you using the SMART version? I, personally, am having troubles with SMART. When I use a script with SMART, it never seems to find any DTMs, and there are certain function that just don't work.
I would suggest trying out the non-SMART version. If you're already using that version, don't worry, I plan on updating this script a lot in the next week or two. I will hopefully be able to improve almost every part of the script.
Thanks for being patient,
Coh3n
Demonghost76
11-24-2009, 10:03 PM
nice
daimon567
11-27-2009, 02:28 PM
I got some wierd error: Unknown identifier 'CreateTPAFromBMP'
Coh3n
11-27-2009, 03:31 PM
I got some wierd error: Unknown identifier 'CreateTPAFromBMP'
Move your plugins. ;) Refer to my guide on installing and setting up SCAR in the How to Auto section of the forums if you're unsure on how to do so.
daimon567
11-27-2009, 07:10 PM
Warning in Cut_DropLogs: Error Finding DTM: 'Logs'. **
LOL I got another error Warning in Cut_DropLogs: Error Finding DTM: 'Logs'. **
Coh3n
11-27-2009, 07:15 PM
WTF? Warning in Cut_DropLogs: Error Finding DTM: 'Logs'. **
No need to use language like that, or to double post. If you took the time to read a few posts above yours, you would know that I am working on a new version that will work much better. Instead, you ranged posted an error, failing to accomplish anything.
Oh, and I'll have you know that I just finished the new version, and it works really, really well. However, I'm not going to upload it. Anyone who was waiting for the new version can graciously thank Daimon for his immature behavior.
daimon567
11-27-2009, 07:28 PM
sry okay? it wasent ment to I thought I didnt have posted it 2 times ok? my nternet stinks...
Coh3n
11-27-2009, 07:30 PM
sry okay? it wasent ment to I thought I didnt have posted it 2 times ok? my nternet stinks...
I appreciate the apology. It's okay, just try to be more polite around these forums, especially if you're new. You won't gain any respect behaving like that. I'll upload the new version for you guys now.
daimon567
11-27-2009, 07:54 PM
just 1 thing about 2.0V I dont get this problem [Runtime Error] : Exception: Can't allocate the DIB handle in line 429 in script C:\Program Files (x86)\SCAR 3.22\includes\SRL\SRL\Core\GameTab.scar
Coh3n
11-27-2009, 07:55 PM
That happens sometimes with SCAR. Just redtart SCAR and it should go away.
daimon567
11-27-2009, 07:57 PM
ok thanks man ur the greatest! :D
gelloxor
11-28-2009, 12:10 PM
Well i got it work somehow, i cut willows and there is only 1 willo tree on my screen. so after it cuts it down it startes to search trees from the screen (movin mouse there and there) and when the tree respawns it takes quite time to start cutting it.
Gonna try to do some oaks on later today and see how it goes.
Coh3n
11-28-2009, 03:18 PM
Well i got it work somehow, i cut willows and there is only 1 willo tree on my screen. so after it cuts it down it startes to search trees from the screen (movin mouse there and there) and when the tree respawns it takes quite time to start cutting it.
Gonna try to do some oaks on later today and see how it goes.
Normal Trees/Oaks/Yews are tough because the colors are so close together. Don't be surprised if the mouse moves the the wrong tree. Also, why are you powerchopping in an area with only one Willow tree? :confused:
If you want a good spot, I suggest the North-East corner of Port Sarim. There are four trees there, and works really well for power chopping.
gelloxor
11-28-2009, 04:23 PM
Normal Trees/Oaks/Yews are tough because the colors are so close together. Don't be surprised if the mouse moves the the wrong tree. Also, why are you powerchopping in an area with only one Willow tree? :confused:
If you want a good spot, I suggest the North-East corner of Port Sarim. There are four trees there, and works really well for power chopping.
Well just wanted to try that out and that 1 willow was near :D ill give it a try in port sarim soon!
Coh3n
11-28-2009, 08:41 PM
Well just wanted to try that out and that 1 willow was near :D ill give it a try in port sarim soon!
Great! Looking forward to some feedback. :smile:
sysofadwn06
11-29-2009, 09:39 PM
Hello again Coh3n I'm back for help again :) Ahah.
First I'd like to say thanks for making the first script that actually worked for me. For a little bit at least.
Whenever I cut a tree, after about 5 seconds the game freezes and logs me out. This happens every time, and I don't get logged back in. Any advice?
Coh3n
12-01-2009, 08:46 PM
Hello again Coh3n I'm back for help again :) Ahah.
First I'd like to say thanks for making the first script that actually worked for me. For a little bit at least.
Whenever I cut a tree, after about 5 seconds the game freezes and logs me out. This happens every time, and I don't get logged back in. Any advice?
Hey, sorry it took so long for me to get back to you, I've been busy the last couple days. So you're saying the game freezes and logs you out? Does the script actually hit the logout button, or does it just go directly to the login screen? If the latter, then the only thing I can think of is a problem with your internet connection. You must be losing connection when you log into RS.
sysofadwn06
12-02-2009, 09:25 PM
It's probably an Internet problem then. Thank you.
I actually got it to work for a few loads but then it logged out. If I can get a good run I'll post it.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.