View Full Version : AshamanOakDoorer
Ashaman88
07-03-2012, 03:51 PM
=====AshamanDoorerV1.8=========
Time Running: 6 Hours, 1 Minutes and 53 Seconds
Doors Made: 2947
Experience Earned: 1768200
Experience/Hour: 291600
Doors/H: 488
===========================
New Progress :D
Epic! Very nice!
V1.9 - speedy gonzales, changed where you must stand for it to work, update to be compatible with RS interface update
Todays RS update changed the build interface, this update compensates for that and also has my speed upgrades. I haven't had a chance to thoroughly test so there may be some bugs I need to work out (currently testing).
Wanted to get a hot fix for the update.
I also changed how you must setup the script.
-I set it up so that you have to be facing opposite the door at the highest angle. Mine is shown in the picture, if your room is facing a different direction, set Direction in the script to whatever direction you need to be facing. In the picture that would be S. (Since my room direction is the Northermost room, I face South (the opposite)).
Basically you have to stand outside of the doorway now and set the direction to opposite of the room you chose (I am doing the northern door so I face south).
I'll add a better picture in a bit to show
Edit: Picture
http://puu.sh/Fzoi
kambyz
07-03-2012, 03:57 PM
Doesn't work for me :(
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'X' never used at line 256
[Hint] C:\Simba\Includes\SRL/SRL/core/animation.simba(257:3): Variable 'Y' never used at line 256
[Error] (214:53): Invalid number of parameters at line 213
Compiling failed.
kambyz
07-03-2012, 04:00 PM
+ i guess u added wrong script.. It's called larder not doorer.
Ashaman88
07-03-2012, 04:02 PM
reduploaded, try now?
kambyz
07-03-2012, 04:07 PM
now it works but ill test how fast it is now :)
Idk why, but it work bad for me. :( Script Stops all the time.
Hi, I got question, why everytime I try to run it I can't? It says compiling error, and will I have to close/reopen simba for 10-30 times, before it finally opens smart and runs -.-
Ashaman88
07-03-2012, 04:28 PM
now it works but ill test how fast it is now :)
Idk why, but it work bad for me. :( Script Stops all the time.
Gotta give me more than that :/ How does it work bad? What is wrong with it? Post a pic of where you are standing and the direction you are facing while it is running.
Hi, I got question, why everytime I try to run it I can't? It says compiling error, and will I have to close/reopen simba for 10-30 times, before it finally opens smart and runs -.-
What compiling error?
kambyz
07-03-2012, 04:35 PM
it was my fault, it works good now, only one glitch, sometimes butler respawn in the other side of the oak door when they are built up and player (user) does not remove door, but try to fetch buttler.
http://www.bildites.lv/images/uigyevll2msys94wal01.png
Ashaman88
07-03-2012, 04:41 PM
it was my fault, it works good now, only one glitch, sometimes butler respawn in the other side of the oak door when they are built up and player (user) does not remove door, but try to fetch buttler.
http://www.bildites.lv/images/uigyevll2msys94wal01.png
Hmm it should only try to fetch butler after it removes the door...When is it normally sending the butler for more planks?
kambyz
07-03-2012, 04:45 PM
Usually it works good, got that glitch only 2 times when he sent butler to get more planks.
Ashaman88
07-03-2012, 04:49 PM
Usually it works good, got that glitch only 2 times when he sent butler to get more planks.
Oh i think i know what it is, is the mouse over the butler? I'm reuploading 1.9 with some fixes (don't feel like changing version just yet), redowload it now!
kambyz
07-03-2012, 04:55 PM
Thanks, i will check it out asap :)
[Error] C:\Simba\Includes\SRL/SRL/core/text.simba(687:13): Unknown identifier 'UpChars' at line 686
Compiling failed.
[Error] (328:34): Invalid number of parameters at line 327
Compiling failed.
Eeverytime, I am noob at this, so I just close and restart until works lol
I tell if I get same error again, seems to work on first time after this update now lol
Ashaman88
07-03-2012, 06:15 PM
I tell if I get same error again, seems to work on first time after this update now lol
Good to hear. Well while running script it messed up somewhere and started to go into the superfast method (which is unstable for bad connections), not sure how it did it but cause xp to go up by a good amount lol.
=========AshamanDoorer==========
==========Version: 1.9==========
Time Running: 1 Hours, 47 Minutes and 17 Seconds
Doors Made: 1029
Experience Earned: 617400
Experience/Hour: 345262
Doors/H: 575
===============================
Normal mode is more like 330 ish with a good connection
I have good connection, and it runs ok, but I am getting compling error again now, ffs, takes like 10 min to start it each time lol, idk why -.-
[Error] C:\Simba\Includes\SRL/SRL/core/text.simba(687:13): Unknown identifier 'UpChars' at line 686
Compiling failed.
Error] (328:34): Invalid number of parameters at line 327
Compiling failed.
Edit, maybe its because I saved script on my computer? When I open each time from here, it works on first try=/
Ashaman88
07-03-2012, 06:29 PM
I have good connection, and it runs ok, but I am getting compling error again now, ffs, takes like 10 min to start it each time lol, idk why -.-
[Error] C:\Simba\Includes\SRL/SRL/core/text.simba(687:13): Unknown identifier 'UpChars' at line 686
Compiling failed.
Error] (328:34): Invalid number of parameters at line 327
Compiling failed.
Edit, maybe its because I saved script on my computer? When I open each time from here, it works on first try=/
Search that error UpChars, i've seen it before on the forums
Ashaman88
07-03-2012, 07:18 PM
Will be adding a hyperdrive mode soon:
=========AshamanDoorer==========
==========Version: 1.10=========
Time Running: 35 Minutes and 0 Seconds
Mode: HyperDrive
Doors Made: 371
Experience Earned: 222600
Experience/Hour: 381491
Doors/H: 636
===============================
This will do the superfast method on purpose, but should only be used for people with good fast connection to rs
Very bugy right now, will not run for over 30 minutes lol -.-
Exp/h is increased, but it will crash within 30 min for me=/
Ashaman88
07-03-2012, 11:57 PM
Very bugy right now, will not run for over 30 minutes lol -.-
Exp/h is increased, but it will crash within 30 min for me=/
Gotta give me more than that, what exactly happens?
Gotta give me more than that, what exactly happens?
When butlers comes back, and says you need 16 spaces blahblah blah, it just stands there and need to restart =/
Note, exactly same thing as on end of page one...
I am pretty sure Its set up right, its pulling 250k/h+ now when works for those minutes, and been doing 6 hours easy before :p
Ashaman88
07-04-2012, 12:32 AM
When butlers comes back, and says you need 16 spaces blahblah blah, it just stands there and need to restart =/
Note, exactly same thing as on end of page one...
I am pretty sure Its set up right, its pulling 250k/h+ now when works for those minutes, and been doing 6 hours easy before :p
250k is pretty slow.. Will you post a pic of where you are standing? What does the debug say when it stops the script?
Currently running the superfast version:
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 39 Minutes and 12 Seconds
Experience Earned: 262200
Experience/Hour: 401261
Doors/H: 669
================================
250k is pretty slow.. Will you post a pic of where you are standing? What does the debug say when it stops the script?
Currently running the superfast version:
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 39 Minutes and 12 Seconds
Experience Earned: 262200
Experience/Hour: 401261
Doors/H: 669
================================
Will do tomorrow :p
3am here -.-
Ty for fast support btw
Ashaman88
07-04-2012, 01:46 AM
Will do tomorrow :p
3am here -.-
Ty for fast support btw
Sweet sounds good!
Went ahead and released 1.10
V1.10 - added hyperdrivemode, which can gets xp/hr's up to 400k!! Some other edits as well
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 1 Hours, 42 Minutes and 46 Seconds
Experience Earned: 691800
Experience/Hour: 403863
Doors/H: 673
================================
Got that until hit client refresh :(
Has new option to have hyperdrive mode, try it out!
Jos3ph
07-04-2012, 03:11 AM
It would have to be my luck that the script is fixed after I get 99. :p
Ashaman88
07-04-2012, 09:38 AM
It would have to be my luck that the script is fixed after I get 99. :p
haha i thought the same thing. well at least you helped inspire me to work on it again!
Ashaman88
07-04-2012, 03:14 PM
Double post but wanted to emphasize added youtube recording to OP
OxtOFa4AAkg
Too bad the software slowed down my ghetto computer and caused rs to lag or it would have gotten up to 400k/hr :)
ohaiyo
07-04-2012, 04:56 PM
Thanks a lot! The script is a lot faster! Even the point where my butler demand for his salary went faster. :P
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 6 Hours, 51 Seconds
Experience Earned: 1942800
Experience/Hour: 323024
Doors/H: 538
Today ^
Ashaman88
07-05-2012, 12:20 AM
Thanks a lot! The script is a lot faster! Even the point where my butler demand for his salary went faster. :P
haha good to hear!
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 6 Hours, 51 Seconds
Experience Earned: 1942800
Experience/Hour: 323024
Doors/H: 538
Today ^
Wow that is pretty nice 6hr proggy!
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 5 Hours, 59 Minutes and 50 Seconds
Experience Earned: 2282400
Experience/Hour: 380565
Doors/H: 634
================================
Ashaman88
07-07-2012, 01:05 PM
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 5 Hours, 59 Minutes and 50 Seconds
Experience Earned: 2282400
Experience/Hour: 380565
Doors/H: 634
================================
wow pretty epic! will add to OP
Blg_Carl
07-08-2012, 09:34 AM
okay found out you have to have a stair case room that is like a + sign and not a regular staircase room. Its the one that cost 7.5k
Rezno
07-09-2012, 01:39 AM
Bot was really messed up for me. It would wait too long and only get one door done before talking to the butler. As well, half the time all it did was talk to the butler. It didn't touch the door at all.
I am unsure what happened, and I tried it about 20 times, same problems each time :S
Ashaman88
07-09-2012, 02:00 AM
Bot was really messed up for me. It would wait too long and only get one door done before talking to the butler. As well, half the time all it did was talk to the butler. It didn't touch the door at all.
I am unsure what happened, and I tried it about 20 times, same problems each time :S
Hmm are you sure you got it all setup correctly? Mind posting a pic of where you are standing while it is running? Also a pic of your graphic settings por favor. Oh and all srl stuff updated?
Rezno
07-09-2012, 04:21 AM
Hmm are you sure you got it all setup correctly? Mind posting a pic of where you are standing while it is running? Also a pic of your graphic settings por favor. Oh and all srl stuff updated?
Re-setup the bot to demonstrate that it wasn't working, and it works now. I must of done something wrong the first time.
Excellent script, thank you.
Ashaman88
07-09-2012, 04:23 AM
Re-setup the bot to demonstrate that it wasn't working, and it works now. I must of done something wrong the first time.
Excellent script, thank you.
Crazier things have happened! Let me know how it runs for you
Savvyio
07-09-2012, 09:54 PM
Thanks for a great bot! Just got 99 construction!
Ashaman88
07-10-2012, 02:44 AM
Thanks for a great bot! Just got 99 construction!
Congrats!
Ashaman88
07-10-2012, 07:23 PM
reuploaded 1.10 with compatibility with new srl update today, should only affect you if you're using simba .99+
Seinfeld
07-11-2012, 04:06 AM
Hey, so what am I doing wrong here. I got 28 oak planks in my inv, i have the thing set to take 26 already from bank, I'm using the East door, so I put "W" right? I'm using 1.10 and i'm not using simba 99 version, it seems to be sitting there even tho im standing in the right place, and the butler is too. It only makes one door then the butler comes.
Ashaman88
07-11-2012, 04:15 AM
Hey, so what am I doing wrong here. I got 28 oak planks in my inv, i have the thing set to take 26 already from bank, I'm using the East door, so I put "W" right? I'm using 1.10 and i'm not using simba 99 version, it seems to be sitting there even tho im standing in the right place, and the butler is too. It only makes one door then the butler comes.
post a pic of where you are standing and what your graphics settings are. Also are you sure you have all your simba junk updated?
Leonoras
07-11-2012, 08:52 PM
I have small problem, it is not working, because RS has been updated or idk, it worked before but today it is not.
Here is screenie:
http://www.rsko.cz/upload/up/56733_wtfbug.png
Anybody know, what to do with this?
Ashaman88
07-11-2012, 09:03 PM
I have small problem, it is not working, because RS has been updated or idk, it worked before but today it is not.
Here is screenie:
http://www.rsko.cz/upload/up/56733_wtfbug.png
Anybody know, what to do with this?
http://villavu.com/forum/showthread.php?t=86107
Gotta wait for a fix :(
Saiga
07-12-2012, 01:45 AM
Haven't tried this script yet but I plan on using it when I decide to buy 99 con (soon). However I have a suggestion, not sure if this is possible or would speed the script up at all but food for thought :p
http://www.youtube.com/watch?v=hxxB14YjgV0
Ashaman88
07-12-2012, 01:50 AM
Haven't tried this script yet but I plan on using it when I decide to buy 99 con (soon). However I have a suggestion, not sure if this is possible or would speed the script up at all but food for thought :p
http://www.youtube.com/watch?v=hxxB14YjgV0
That is the same method mine uses :P It just depends on your connection. The guy in that video had a great connection so the doors were built and removed very fast (the actual appearing and disappearing of the doors)
Saiga
07-12-2012, 01:51 AM
That is the same method mine uses :P It just depends on your connection. The guy in that video had a great connection so the doors were built and removed very fast (the actual appearing and disappearing of the doors)
Ah apologies, I didn't see any noted planks in any of the screenies/vids. But if that's the case I might get 99 con sooner rather than later ;)
Ashaman88
07-12-2012, 02:18 AM
Ah apologies, I didn't see any noted planks in any of the screenies/vids. But if that's the case I might get 99 con sooner rather than later ;)
No I guess your right but it does the same amount of clicks. Instead of clicking on inventory then clicking on butler, mine right clicks on butler and selects fetch. So same amount of time taken if that makes sense
keutel
07-12-2012, 09:20 AM
how do i get this to start lol, cuz i assume i cannot put in my login details?, and when i press enable smart it doesnt do anything?
Medisch
07-12-2012, 01:12 PM
how do i get this to start lol, cuz i assume i cannot put in my login details?, and when i press enable smart it doesnt do anything?
If you look like 4 posts ago ash said we have to wait for update....
Reinier
07-12-2012, 05:14 PM
Not starting for me.
Medisch
07-13-2012, 12:00 PM
Not starting for me.
Do you people read???
RS had an update. It will take some time (as this is a free script) for the the bot to be back and working....
Ashaman88
07-13-2012, 01:03 PM
Do you people read???
RS had an update. It will take some time (as this is a free script) for the the bot to be back and working....
Thanks for doing that, it is a pain when it is the same comments on all my scripts lol. Depending on how they decide to fix the include, I may or may not have to make a few adjustments to this script as it uses a lot of coordinate boxes and what not. Wouldn't take much time to update at all though.
teamemb99
07-13-2012, 03:49 PM
Thanks for doing that, it is a pain when it is the same comments on all my scripts lol. Depending on how they decide to fix the include, I may or may not have to make a few adjustments to this script as it uses a lot of coordinate boxes and what not. Wouldn't take much time to update at all though.
any idea when update will be? thanks
Ashaman88
07-13-2012, 10:28 PM
any idea when update will be? thanks
my guess in the next day or so, will probably require you to update simba when it goes through
Medisch
07-14-2012, 07:06 PM
Thanks for doing that, it is a pain when it is the same comments on all my scripts lol. Depending on how they decide to fix the include, I may or may not have to make a few adjustments to this script as it uses a lot of coordinate boxes and what not. Wouldn't take much time to update at all though.
Hey an no issue. I always see this "when is updated?" "mine doesn't work" "whats wrong" all in a row. if they just took some time to read they would notice there was an update and this probably isn't the only thing you do all day. It annoys me and im not even doing scripts.....
speedypetey
07-19-2012, 12:15 AM
400k xp/hr!?! how did I not know about this! I've been settling for some crappy 170k xp/hr script on PB
will definitely wait for this script to be updated before i continue my road to 99 construction. cant wait!
speedster
07-19-2012, 12:48 AM
I never managed to get this one to work, but the Larder Script is a masterpiece!
But yea guys you will have to wait for Wizzup to push an update to be official or use the CustomFix which Brandon came up with!
pupyte123
07-20-2012, 01:40 PM
how to setup samoen can help when i start i got this and i odnt know how to log in and where log in need
http://img805.imageshack.us/img805/2571/lolwy.png (http://imageshack.us/photo/my-images/805/lolwy.png/)
samone can help?
Ashaman88
07-20-2012, 02:12 PM
how to setup samoen can help when i start i got this and i odnt know how to log in and where log in need
http://img805.imageshack.us/img805/2571/lolwy.png (http://imageshack.us/photo/my-images/805/lolwy.png/)
samone can help?
Read a few posts up. :)
Saiga
07-22-2012, 05:42 AM
Is this currently working? I started it standing in front of the north door in a stairs room with a full invy of oak planks and the butler running to bank, and it doesn't do anything just stands there. It's extremely annoying because everytime I log out I have to keep luring the butler back to the dungeon.
Ashaman88
07-22-2012, 07:41 PM
Is this currently working? I started it standing in front of the north door in a stairs room with a full invy of oak planks and the butler running to bank, and it doesn't do anything just stands there. It's extremely annoying because everytime I log out I have to keep luring the butler back to the dungeon.
Try reading through the last page posts, I'll copy and paste my last response:
http://villavu.com/forum/showthread.php?t=86107
Gotta wait for a fix
Gregbot
07-24-2012, 10:46 AM
V1.9 - speedy gonzales, changed where you must stand for it to work, update to be compatible with RS interface update
Does that mean it works with the update that brought the little navigation bar at the top of the screen? Given that people did the temporary ghetto fix to get smart working.
Ashaman88
07-24-2012, 01:57 PM
Does that mean it works with the update that brought the little navigation bar at the top of the screen? Given that people did the temporary ghetto fix to get smart working.
No that was talking about the new construction build interface they introduced a few weeks ago (not the nav bar). It probably only needs a few slight modifications for it to work properly, but I'm going to wait until the official fix before editing any of my scripts
Gregbot
07-24-2012, 07:57 PM
Oh alright thanks for the heads up ashaman
No that was talking about the new construction build interface they introduced a few weeks ago (not the nav bar). It probably only needs a few slight modifications for it to work properly, but I'm going to wait until the official fix before editing any of my scripts
Never used this script before but after editting it to make it work with the new updates heres what I got.
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 19 Minutes and 33 Seconds
Experience Earned: 69600
Experience/Hour: 213432
Doors/H: 356
Is that good or bad?
Ashaman88
07-27-2012, 03:26 PM
Never used this script before but after editting it to make it work with the new updates heres what I got.
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 19 Minutes and 33 Seconds
Experience Earned: 69600
Experience/Hour: 213432
Doors/H: 356
Is that good or bad?
Are you using it today? With the new simba? What did you have to edit? Did you try to run it without any edits? and no that is not good xp.
Are you using it today? With the new simba? What did you have to edit? Did you try to run it without and edits? and no that is not good xp.
Yes I am using it right now. actually looking at it, I don't think I editted anything at all. Sorry I was a bit confused as I have only just got round to getting simba to work and have tried quite a few scripts lately.
Ashaman88
07-27-2012, 03:45 PM
Gone for two weeks! No updates till then! (http://villavu.com/forum/showthread.php?p=1076812#post1076812)
Leonardo Da Vinci
07-29-2012, 05:42 AM
Has this been updated to be used with the latest version of simba?
(I can never get it working when I do the editing myself...)
Seanboi
07-29-2012, 11:35 PM
150kxp p/h :L dang help? or tips?
Leonardo Da Vinci
07-30-2012, 01:02 AM
150kxp p/h :L dang help? or tips?
Could you post the edited script?
I've got some +reps that need giving!
I don't know if this is ok or not but here is what I have and it works for me.
Sorry if I've over stepped the mark ashaman88, if you have a problem with this post just message me when you get back.
Program AshamanDoorer;
{$define SMART}
{$i srl/srl.simba}
{$I SRL/SRL/Misc/Debug.simba}
{
AshamanDoorer v1.10
-Make sure you have a full load of Oak Planks on you
-Make sure you are ONLY USING DEMON BUTLER
-Make sure you have already told the demon butler to go get 26 planks
-Make sure you are standing in the right place. The Door recess in the furthest room you have in the cardinal direction you chose.
}
///////////////////////////////////////////////////////////////////////
// //
// Begin of user setup //
// Fill in the fields below //
// //
///////////////////////////////////////////////////////////////////////
Const
SRLStats_Username = ''; // ***Leave blank if you don't have a stats account***
SRLStats_Password = '';
Direction = 'S'; // ***Set this to opposite whatever direction your door is (like the picture)***
HyperDriveMode = True; // ***Set this to true if you want super fast, might break with slower connections!!!***
//////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// Don't touch below this line unless you know what you're doing!! //
// //
//////////////////////////////////////////////////////////////////////////////////////////////////////
Procedure DeclarePlayers;
Begin
HowManyPlayers := 1;
NumberOfPlayers(HowManyPlayers);
CurrentPlayer := 0;
Players[0].Active := True;
End;
Const
DoorX1=248;
DoorY1=159;
DoorX2=278;
DoorY2=179;
ScriptVersion = '1.10';
Debug = False;
Var
DoorCount,XP,StartTime,StartingExperience,DoorsPH, XPH,Timeout: Integer;
Count,Start: Integer;
FirstMouse: Boolean;
{************************************************* ******************************
All of these mouse movements are credited to benland100 and flight
************************************************** *****************************}
//By Bandland100, modified to shift mouse speeds after every step
procedure SuperWindMouse(xs, ys, xe, ye, gravity, wind, minWait, maxWait, maxStep, targetArea: extended);
var
veloX,veloY,windX,windY,veloMag,dist,randomDist,la stDist,step: extended;
lastX,lastY,MSP,W: integer;
sqrt2,sqrt3,sqrt5: extended;
begin
MSP := MouseSpeed;
sqrt2:= sqrt(2);
sqrt3:= sqrt(3);
sqrt5:= sqrt(5);
while hypot(xs - xe, ys - ye) > 1 do
begin
dist:= hypot(xs - xe, ys - ye);
wind:= minE(wind, dist);
if dist >= targetArea then
begin
windX:= windX / sqrt3 + (random(round(wind) * 2 + 1) - wind) / sqrt5;
windY:= windY / sqrt3 + (random(round(wind) * 2 + 1) - wind) / sqrt5;
end else
begin
windX:= windX / sqrt2;
windY:= windY / sqrt2;
if (maxStep < 3) then
begin
maxStep:= random(3) + 3.0;
end else
begin
maxStep:= maxStep / sqrt5;
end;
end;
veloX:= veloX + windX;
veloY:= veloY + windY;
veloX:= veloX + gravity * (xe - xs) / dist;
veloY:= veloY + gravity * (ye - ys) / dist;
if hypot(veloX, veloY) > maxStep then
begin
randomDist:= maxStep / 2.0 + random(round(maxStep) div 2);
veloMag:= sqrt(veloX * veloX + veloY * veloY);
veloX:= (veloX / veloMag) * randomDist;
veloY:= (veloY / veloMag) * randomDist;
end;
lastX:= Round(xs);
lastY:= Round(ys);
xs:= xs + veloX;
ys:= ys + veloY;
case Random(50) of
1..25: W := (MSP + (Random((MSP/4))));
26..50: W := (MSP - (RandomRange((MSP/2), MSP-1)));
end;
if (W < 1) then
W := 1;
if (lastX <> Round(xs)) or (lastY <> Round(ys)) then
MoveMouse(Round(xs), Round(ys));
step:= hypot(xs - lastX, ys - lastY);
//W := round((maxWait - minWait) * (step / maxStep) + minWait);
wait(W);
lastdist:= dist;
end;
if (Round(xe) <> Round(xs)) or (Round(ye) <> Round(ys)) then
MoveMouse(Round(xe), Round(ye));
MouseSpeed := MSP;
end;
Procedure HumanMMouse(eX, eY, ranX, ranY: Integer);
var
randSpeed: extended;
X,Y,X2,Y2,j,Dist,MP: integer;
begin
j := MouseSpeed;
GetMousePos(X, Y);
Dist := Distance(X, Y, eX, eY);
MP := Round(Dist/150);
if MP < 0 then
MP := 1;
randSpeed := (random(MouseSpeed) / 2.0 + MouseSpeed) / 10.0;
X2 := RandomRange(eX-(j*MP), eX+(j*MP));
Y2 := RandomRange(eY-(j*MP), eY+(j*MP));
SuperWindMouse(X, Y, X2, Y2, 11, 8, 10.0 / randSpeed, 12.0 / randSpeed, 10.0 * randSpeed, 10.0 * randSpeed);
GetMousePos(X, Y);
MMouse(eX, eY, ranX, ranY);
MouseSpeed := j;
end;
Procedure FailSafe;
Var
T: Integer;
Begin
If Debug Then
Writeln('Misclicked, doing failsafe!');
If Not LoggedIn Then
Exit;
Mouse(259,189,4,4,True);
Wait(RandomRange(400,500));
MarkTime(T);
Repeat
Wait(100);
If TimeFromMark(T)>5000 Then
Exit;
Until (Not(Ismoving));
End;
Procedure TypeFast(Text: String);
Var
I: Integer;
Begin
For I:=1 to Length(Text) Do
{$IFDEF SIMBAMAJOR980}
SendKeys(Text[I], 10 + Random(2));
{$ELSE}
SendKeys(Text[I], 10 + Random(2), 10 + Random(2));
{$ENDIF}
End;
Function CheckDoor: Boolean;
Var
CTS: Integer;
TPA: TPointArray;
ATPA: T2DPointArray;
Begin
Result:=False;
If(Not(LoggedIn)) Then
Exit;
CTS:= GetColorToleranceSpeed;
ColorToleranceSpeed(2);
SetColorSpeed2Modifiers(0.07,0.39);
FindColorsSpiralTolerance(MSCX,MSCY,TPA,4480367,21 5,160,267,186,17);
ColorToleranceSpeed(CTS);
SetColorSpeed2Modifiers(0.2, 0.2);
ATPA := TPAtoATPAEx(TPA,10,10);
If Debug Then
DebugATPABounds(ATPA);
If Debug Then
Writeln(Length(ATPA));
If (Length(ATPA) < 10) Then
Begin
If Debug Then
Writeln('Door is not present')
End Else
Begin
Result:=True;
If Debug Then
Writeln('Door is present.');
End;
End;
Function FindButler: Boolean; Forward;
Function FindDoor: Boolean;
Var
X,Y,H,H2,I,CTS,T,POSX,POSY: Integer;
TPA: TPointArray;
ATPA: T2DPointArray;
QuickClick: Boolean;
Begin
Result := False;
QuickClick:=False;
If Not LoggedIn Then
Exit;
If Not HyperDriveMode Then
If Start = 1 Then
Begin
If Debug Then
Writeln('Sending butler 1st time');
MarkTime(T);
Repeat
Wait(100);
If TimeFromMark(T) > 10000 Then
Begin
If Debug Then
Writeln('Took too long to find butler');
Break;
End;
Until FindButler;
End;
CTS:= GetColorToleranceSpeed;
ColorToleranceSpeed(2);
SetColorSpeed2Modifiers(0.07,0.39);
FindColorsSpiralTolerance(MSCX,MSCY,TPA,4480367,Do orX1,DoorY1,DoorX2,DoorY2,17);
ColorToleranceSpeed(CTS);
SetColorSpeed2Modifiers(0.2, 0.2);
ATPA := TPAtoATPAEx(TPA,20,20);
If Debug Then
DebugATPABounds(ATPA);
If (Length(ATPA) = 0) Then
Begin
If Debug Then
Writeln('No door colors found.');
Exit;
End;
H := High(ATPA);
If H < 2 Then
H2 := H Else
H2 := 2;
For I := 0 To H Do
Begin
MiddleTPAEx(ATPA[I], X, Y);
GetMousePos(POSX,POSY);
If (Not PointInBox(Point(POSX,POSY),IntToBox(DoorX1,DoorY1 ,DoorX2,DoorY2))) Then
Begin
If Debug Then
Writeln('Moving Mouse to door');
HumanMMouse(X,Y,5,5);
End Else
If Debug Then
Writeln('Mouse already in POS, door');
If (WaitUpTextMulti(['Open','pen','Door','oor','utle','tler','Butl'],RandomRange(300,400))) Then
Begin
If Debug Then
Writeln('Found door, clicking');
ClickMouse2(False);
If (QuickClick) And (OptionsExist(['emove'],False)) Then
ClickMouse2(True) Else
Begin
If Debug Then
Writeln(GetChooseOptions('all'));
If Not WaitOption('emove',RandomRange(700,900)) Then
Exit;
End;
If Debug Then
Writeln('Clicked option to remove.');
If DidYellowClick Then
Begin
FailSafe;
FirstMouse:=True;
Exit;
End;
MarkTime(T);
Repeat
Wait(Random(200));
If (TimeFromMark(T) > 4000) Then
Begin
If Debug Then
Writeln('Yes did not popup, trying again.');
Exit;
End;
Until (FindNPCChatText('Yes',Nothing));
TypeFast('1');
MarkTime(T);
Repeat
If CountColor(37083,141,374,378,470)>0 Then
Break;
If TimeFromMark(T)>4000 Then
Begin
If Debug Then
Writeln('Didnt find orange highlight color for saying yes');
Exit;
End;
Until False;
If Count < 2 Then
MouseBox(DoorX1,DoorY1,DoorX2,DoorY2,Mouse_Move);
Result := True;
Exit;
End;
End;
End;
Function FindButler: Boolean;
Var
X,Y,H,H2,I,CTS,T,Inventory: Integer;
TPA: TPointArray;
ATPA: T2DPointArray;
Label
Jump;
Begin
Result := False;
Inventory:=0;
If Not LoggedIn Then
Exit;
FindNormalRandoms;
CTS := GetColorToleranceSpeed;
ColorToleranceSpeed(2);
SetColorSpeed2Modifiers(0.30,1.21);
FindColorsSpiralTolerance(MSCX,MSCY,TPA,1580857,18 2,86,339,252,12);
ColorToleranceSpeed(CTS);
SetColorSpeed2Modifiers(0.2,0.2);
ATPA := TPAtoATPAEx(TPA,20,20);
If Debug Then
DebugATPABounds(ATPA);
If (Length(ATPA) = 0) Then
Begin
If Debug Then
Writeln('No butler found.');
If (OptionsExist(['Exam','mine','Examine','Canc','ncel','Cancel'],False)) Then
Begin
If Debug Then
Writeln('Closing options menu');
MMouse(50,50,100,100);
End;
Exit;
End;
H := High(ATPA);
If H < 4 Then
H2 := H Else
H2 := 4;
For I:= 0 To H2 Do
Begin
MiddleTPAEx(ATPA[I],X,Y);
Jump:
If Not (IsUpTextMultiCustom(['utle','tler','Butl'])) Then
HumanMMouse(X,Y,4,4);
If (WaitUpTextMulti(['utle','tler','Butl'],RandomRange(250,300))) Then
Begin
If Debug Then
Writeln('Found Butler, Clicking.');
ClickMouse2(False);
If WaitOptionMulti(['etch','from','bank'],RandomRange(700,900)) Then
Begin
If Debug Then
Writeln('Found fetch option.');
If DidYellowClick Then
Begin
FailSafe;
FirstMouse:=True;
Exit;
End;
MarkTime(T);
Repeat
If CountColor(37083,141,374,378,470)=0 Then
Break;
If TimeFromMark(T)>4000 Then
Begin
If Debug Then
Writeln('Orange highlight color for paying butler didnt go away');
Exit;
End;
Until False;
MarkTime(T);
Repeat
Wait(Random(200));
If TimeFromMark(T) > 8000 Then
Begin
If Debug Then
Writeln('Didnt find butler chat option timeout');
Break;
End;
Until ((FindNPCChatText('coins',Nothing)) Or (FindNPCChatText('nother', Nothing)));
If FindNPCChatText('coins',Nothing) Then
Begin
If Debug Then
Writeln('Paying butler');
ClickContinue(True,True);
TypeFast('1');
MarkTime(T);
Repeat
If CountColor(37083,141,374,378,470)>0 Then
Break;
If TimeFromMark(T)>4000 Then
Begin
If Debug Then
Writeln('Didnt find orange highlight color for paying butler');
Exit;
End;
Until False;
MarkTime(T);
If Inventory=0 Then
Repeat
If TimeFromMark(T)>600 Then
Begin
HumanMMouse(X,Y,4,4);
ClickMouse2(True);
Inventory:=Inventory+1;
Break;
End;
Until InvFull;
If TimeFromMark(T)>600 Then
GoTo Jump;
If Debug Then
Writeln('Re-clicking butler');
GoTo Jump;
End;
MarkTime(T);
If Inventory=0 Then
Repeat
If TimeFromMark(T)>600 Then
Begin
HumanMMouse(X,Y,4,4);
ClickMouse2(True);
Inventory:=Inventory+1;
Break;
End;
Until InvFull;
If TimeFromMark(T)>600 Then
GoTo Jump;
If (FindNPCChatText('nother', Nothing)) Then
Begin
If Debug Then
Writeln('Sending for more planks.');
TypeFast('1');
MarkTime(T);
Repeat
If CountColor(37083,141,374,378,470)>0 Then
Break;
If TimeFromMark(T)>4000 Then
Begin
If Debug Then
Writeln('Didnt find orange highlight color for paying butler');
Exit;
End;
Until False;
MouseBox(DoorX1,DoorY1,DoorX2,DoorY2,Mouse_Move);
Count:= 0;
Result:= True;
If HyperDriveMode Then
If CheckDoor Then
If FindDoor Then
Begin
MarkTime(T);
Repeat
Wait(Random(200));
If TimeFromMark(T)>6000 Then
Break;
Until Not CheckDoor;
End;
Exit;
End;
End;
End;
End;
End;
Function FindEmpty:Boolean;
Var
H,H2,I,CTS,T,X,Y,POSX,POSY: Integer;
TPA: TPointArray;
ATPA: T2DPointArray;
QuickClick: Boolean;
Begin
Result := False;
QuickClick:=False;
If(Not(LoggedIn)) Then
Exit;
If TimeFromMark(Timeout) > 35000 Then
Begin
Writeln('Something went wrong, checking for open door');
If Not CheckDoor Then
Begin
Writeln('Didnt find open door, shutting down');
TerminateScript;
End Else
MarkTime(Timeout);
End;
If Not HyperDriveMode Then
Begin
If (Count >= 2) And (Not InvFull) Then
Begin
If Debug Then
Writeln('Count too high, sending for butler');
MarkTime(T);
Repeat
If TimeFromMark(T) > 10000 Then
Begin
If Debug Then
Writeln('Took too long to find butler');
Break;
End;
Until FindButler;
End;
End Else
Begin
If (InvFull) Or (Count >= 2) Or (InvCount<10) Then
Begin
If Debug Then
Writeln('Count too high, sending for butler');
MarkTime(T);
Repeat
If TimeFromMark(T) > 4000 Then
Begin
If Debug Then
Writeln('Took too long to find butler');
Break;
End;
Until FindButler;
End;
End;
CTS := GetColorToleranceSpeed;
ColorToleranceSpeed(2);
SetColorSpeed2Modifiers(0.51,0.02);
FindColorsSpiralTolerance(MSCX,MSCY,TPA,7435639,Do orX1,DoorY1,DoorX2,DoorY2,17);
ColorToleranceSpeed(CTS);
SetColorSpeed2Modifiers(0.2, 0.2);
ATPA := TPAtoATPAEx(TPA, 20, 20);
If Debug Then
DebugATPABounds(ATPA);
If (Length(ATPA) = 0) Then
Begin
If Debug Then
Writeln('No empty door found');
Exit;
End;
H := High(ATPA);
If H < 2 Then
H2 := H Else
H2 := 2;
For I := 0 To H2 Do
Begin
MiddleTPAEx(ATPA[I],X,Y);
GetMousePos(POSX,POSY);
If (Not PointInBox(Point(POSX,POSY),IntToBox(DoorX1,DoorY1 ,DoorX2,DoorY2))) Then
Begin
If Debug Then
Writeln('Moving Mouse');
HumanMMouse(X,Y,5,5);
End Else
If Debug Then
Writeln('Mouse already in position');
If (WaitUpTextMulti(['Wal','alk','utle','tler','Butl'],300)) Then
Begin
If Debug Then
Writeln('Found empty door spot, clicking.');
ClickMouse2(False);
If InvCount<10 Then
Begin
If HyperDriveMode Then
Exit;
If Debug Then
Writeln('Count >=1, waiting for supplies');
If WaitOptionMultiEx(['uild','Buil'],'all',Move,RandomRange(700,900)) Then
Begin
If Debug Then
Writeln('QuickClick=True');
QuickClick:=True;
End Else
If Debug Then
Writeln(GetChooseOptions('all'));
MarkTime(T);
Repeat
Wait(100);
If (TimeFromMark(T)>6000) Then
Begin
If Debug Then
Writeln('No supplies for too long');
Break;
End;
Until (InvCount >= 10);
If InvCount < 10 Then
Begin
If Debug Then
Writeln('Still low on supplies, sending for butler.');
If (OptionsExist(['Exam','mine','Examine','Canc','ncel','Cancel'],False)) Then
Begin
If Debug Then
Writeln('Closing options menu');
MMouse(50,50,100,100);
End;
FindButler;
QuickClick:=False;
If Debug Then
Writeln('Re-clicking door.');
HumanMMouse(X,Y,5,5);
ClickMouse2(False);
Marktime(T);
Repeat
Wait(100);
Until ((InvCount >= 10) or (TimeFromMark(T) > 30000))
End;
If InvCount < 10 Then
Begin
Writeln('Out of supplies. Goodbye!');
Logout;
Terminatescript;
End;
End;
If (QuickClick) And (OptionsExist(['uild','Buil','Cance'],False)) Then
ClickMouse2(True) Else
Begin
If Debug Then
Writeln(GetChooseOptions('all'));
If Not WaitOptionMulti(['uild','Buil'],RandomRange(700,900)) Then
Exit;
End;
If Debug Then
Writeln('Clicked build option.');
If DidYellowClick Then
Begin
FailSafe;
FirstMouse:=True;
Exit;
End Else
Begin
FirstMouse:=True;
Result:= True;
Exit;
End;
End;
End;
End;
Procedure ProgressReport;
Var
Mode: String;
Begin
If Not Debug Then
ClearDebug;
XP := (GetXPBarTotal - StartingExperience);
XPH := Round(XP * (3600.0 / (GetTimeRunning / 1000.0)));
DoorCount := Round((XP) / (600));
DoorsPH := Round((DoorCount * (3600.0 / (GetTimeRunning / 1000.0))));
If HyperDriveMode Then
Mode:='HyperDrive' Else
Mode:='Normal';
Writeln('=========AshamanDoorer==========');
Writeln('=========Version: '+ScriptVersion+'==========')
Writeln('Mode: ' + Mode);
Writeln('Time Running: ' + TimeRunning);
Writeln('Experience Earned: ' + IntToStr(XP));
Writeln('Experience/Hour: ' + IntToStr(XPH));
Writeln('Doors/H: ' + IntToStr(DoorsPH));
Writeln('================================');
Stats_IncVariable('Oak Doors (Constructed)', 1);
Stats_Commit;
MarkTime(Timeout);
End;
Function FindBuild:Boolean;
Begin
Result := False;
If Not LoggedIn then
Exit;
If Debug Then
Writeln('Moving mouse to build door icon.');
MouseBox(188,60,242,100,Mouse_Move);
If WaitUpTextMulti(['uild','Bui','Bu'],RandomRange(2000,2200)) Then
Begin
If Debug Then
Writeln('Build icon is up, clicking.');
ClickMouse2(True);
If FlagPresent Then
Begin
FailSafe;
FirstMouse:=True;
FindEmpty;
End Else
Begin
Count:= Count + 1;
Start:= Start +1;
Result:=True;
MouseBox(DoorX1,DoorY1,DoorX2,DoorY2,Mouse_Move);
End;
End Else
Writeln(GetUpText);
End;
Procedure MainLoop;
Begin
If Debug Then
Writeln('WAITING ON FINDEMPTY FUNCTION');
If WaitFunc(@FindEmpty,100,15000) Then
Begin
If Debug Then
Writeln('WAITING ON FINDBUILD FUNCTION');
If WaitFunc(@FindBuild,100,7000) Then
Begin
If Debug Then
Writeln('WAITING ON FINDDOOR FUNCTION');
If WaitFunc(@FindDoor,100,7000) Then
ProgressReport;
End Else
FindDoor;
End Else
If FindBuild Then
Begin
If Debug Then
Writeln('WAITING ON FINDDOOR FUNCTION');
If WaitFunc(@FindDoor,100,7000) Then
ProgressReport;
End Else
FindDoor;
End;
Procedure Setup;
Begin
{$IFDEF SIMBAMAJOR980}
SMART_SERVER := 10;
SMART_MEMBERS := TRUE;
SMART_SIGNED := TRUE;
SMART_SUPERDETAIL := FALSE;
{$ELSE}
SRL_SIXHOURFIX := TRUE;
SMART_FIXSPEED := TRUE;
{$ENDIF}
SetupSRL;
If (SRLStats_Username = '') Then
SetupSRLStats(948, 'Anonymous', 'anon1337')
Else
SetupSRLStats(948, SRLStats_Username, SRLStats_Password);
ClearDebug;
DeclarePlayers;
If (Not LoggedIn) Then
Writeln('Please log in and setup the position as needed');
Repeat
Wait(RandomRange(500,1500));
Until (LoggedIn);
If InvCount < 28 Then
Repeat
Writeln('Please get a full inventory of planks');
Wait(RandomRange(3000,4000));
Until (InvCount = 28);
MakeCompass(Direction);
SetAngle(SRL_ANGLE_HIGH);
SmartSetRefresh(90);
FirstMouse:=True;
ToggleXPBar(True);
StartingExperience := GetXPBarTotal;
StartTime:=GetSystemTime;
MarkTime(Timeout);
End;
Begin
Setup;
Repeat
Mainloop;
Until (AllPlayersInactive);
End.
rougarou
08-01-2012, 09:09 AM
I just downloaded 1.10, only getting 200-250k xp an hour. Not the best but better than anything else...
Pascal Riddles
08-02-2012, 08:11 PM
worked last night but since this morning update i cant get it to work was using rlp script
rougarou
08-03-2012, 05:38 PM
works fine for me. A bit slower though
Gregbot
08-04-2012, 01:59 PM
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 2 Hours, 20 Minutes and 21 Seconds
Experience Earned: 864000
Experience/Hour: 369360
Doors/H: 616
================================
Weird as I got max 220k exp per hour yesterday for hours.
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: HyperDrive
Time Running: 2 Hours, 20 Minutes and 21 Seconds
Experience Earned: 864000
Experience/Hour: 369360
Doors/H: 616
================================
Weird as I got max 220k exp per hour yesterday for hours.
what settings are you using? any mods to script?
Pascal Riddles
08-06-2012, 04:58 AM
i change to 20 in inventory because i use s/c hammers which is only reason its hard to get script to run cause its not ment to run with them in the inventory and i find hyper mode has less problems with it the problem is it cant find door and it writes out "c" on simba
Ashaman88
08-07-2012, 03:58 AM
I'll be checking out any issues tomorrow, just got back!
Is script working yet? Last time I tried it few days ago it wasn't working =/
mtp1200
08-16-2012, 03:34 AM
its working but crashes constantly
Chris
08-17-2012, 05:06 AM
Running great :)
=========AshamanDoorer==========
=========Version: 1.10==========
Mode: Normal
Time Running: 5 Hours, 50 Minutes and 21 Seconds
Experience Earned: 1288200
Experience/Hour: 220607
Doors/H: 368
================================
Not using HyperDriveMode.
mtp1200
08-18-2012, 05:26 AM
shenanigans ....... i cant get pass 8 mins without it not being able to find the door and shutting down hyper and normal does same thing
Medisch
08-20-2012, 03:14 PM
How do you guys get proggies........ the cmd thing never works for me. always say like xp/h: 0
blah blah: 0
time ran: 3 hours
for every bot, never works. Help?
alskinso
08-24-2012, 03:46 AM
Not to be a prick... but V1.1 and V1.10 is the same thing so maybe you could change 1.10 to V2.0 or V1.95?
No offence meant im sure you just did it in a rush
Ty for the great bot.
Ashaman88
09-01-2012, 02:28 PM
shenanigans ....... i cant get pass 8 mins without it not being able to find the door and shutting down hyper and normal does same thing
Post a pic of your graphic settings and where you are standing!
How do you guys get proggies........ the cmd thing never works for me. always say like xp/h: 0
blah blah: 0
time ran: 3 hours
for every bot, never works. Help?
It is probably b/c you don't have the xp bar set to construction or total xp. You need to set the top xp bar to that and make sure it doesn't say 'lots' either.
Updated slightly to new version. With a little testing it seems it's harder for me to find a good world to do it on as I keep having a slight lag. That is what hurts hyperdrive mode.
V1.11 - few tweaks, updated some instructions - remember that lag kills xp!!
everytime I use this the butler interrupts me when I have the door spot interface open to select oak door, then the butler says he will keep those 10 logs until I have space, the thing is the script takes a rather long time to carry on building.
I also use the oak larder script as well and that has no issues for me, the issue above makes the larder script faster then this for me.
Edit* I just left it for a bit and none hyper mode is working ok now but at the start it was doing the above issue too.
Awesome script though :)
Ashaman88
09-02-2012, 07:46 PM
everytime I use this the butler interrupts me when I have the door spot interface open to select oak door, then the butler says he will keep those 10 logs until I have space, the thing is the script takes a rather long time to carry on building.
I also use the oak larder script as well and that has no issues for me, the issue above makes the larder script faster then this for me.
Edit* I just left it for a bit and none hyper mode is working ok now but at the start it was doing the above issue too.
Awesome script though :)
Yeah it looks like there is more lag now with the client so the hyperdrive mode is less stable for speed, it still will work just pauses like you said if the interfaces and building times are slow.
nouRiD
09-04-2012, 03:08 AM
Love the script. I tried hyperdrive but it kept giving me issues so I just switched to normal. It's maintaining a rate of about 225k xp/hour. Thanks.
Most recent progress report:
=========AshamanDoorer==========
=========Version: 1.11==========
Mode: Normal
Time Running: 1 Hours, 41 Minutes and 22 Seconds
Experience Earned: 379841
Experience/Hour: 224813
Doors/H: 375
================================
EDIT: After running it for a few more hours it occasionally quits and comes up with an error saying it can't find the door. I've never seen it quit though so I don't know what else to say.
Ashaman88
09-04-2012, 11:29 PM
Love the script. I tried hyperdrive but it kept giving me issues so I just switched to normal. It's maintaining a rate of about 225k xp/hour. Thanks.
Most recent progress report:
=========AshamanDoorer==========
=========Version: 1.11==========
Mode: Normal
Time Running: 1 Hours, 41 Minutes and 22 Seconds
Experience Earned: 379841
Experience/Hour: 224813
Doors/H: 375
================================
EDIT: After running it for a few more hours it occasionally quits and comes up with an error saying it can't find the door. I've never seen it quit though so I don't know what else to say.
That is pretty strange, is the door made or not made when it stops?
nouRiD
09-05-2012, 02:41 AM
That is pretty strange, is the door made or not made when it stops?
The door is not made when it happens. If it happens again I'll post exactly what the error says.
Ashaman88
09-05-2012, 03:03 AM
The door is not made when it happens. If it happens again I'll post exactly what the error says.
Yeah that is a little strange, I'll look over the code, copy and paste what that debug says if it happens again! Thanks for the feedback
nouRiD
09-05-2012, 04:46 AM
Yeah that is a little strange, I'll look over the code, copy and paste what that debug says if it happens again! Thanks for the feedback
Caught it in action this time. It was just right clicking fetch from bank repeatedly. Then I guess it actually managed to get through the process of telling the butler what to fetch because my butler disappeared but it gave this message
Something went wrong, checking for open door
Didnt find open door, shutting down
Successfully executed.
And shut down. The door was already removed and the bot was standing in the proper position while it was doing this. It doesn't really bother me too much because it runs for at least 2 hours before this happens but I just thought I'd let you know.
I hope that's what you meant by what the debug said. If it's not I still have about 90k more planks to go through so I'll be happy to try again.
Ashaman88
09-05-2012, 04:51 AM
Caught it in action this time. It was just right clicking fetch from bank repeatedly. Then I guess it actually managed to get through the process of telling the butler what to fetch because my butler disappeared but it gave this message
And shut down. The door was already removed and the bot was standing in the proper position while it was doing this. It doesn't really bother me too much because it runs for at least 2 hours before this happens but I just thought I'd let you know.
I hope that's what you meant by what the debug said. If it's not I still have about 90k more planks to go through so I'll be happy to try again.
Yeah that's what I meant thanks. That is strange though, it sounds like an old failsafe that shouldn't be there anymore...I can't remember what all has been changed but thanks for the info!
Will put this to use and post a proggy. Thank you <3
Andres
09-12-2012, 01:48 PM
It looks like the Anagogic Orts that are dropping after the Clan Avatar update are causing some issues. After one drops, the script will just hover over the ort whenever it sees one. It causes it to not build doors and just send the butler out over and over.
Ashaman88
09-12-2012, 02:08 PM
It looks like the Anagogic Orts that are dropping after the Clan Avatar update are causing some issues. After one drops, the script will just hover over the ort whenever it sees one. It causes it to not build doors and just send the butler out over and over.
Ah man, any way to disable that drop until I can fix it? It is probably one of my failsafes kicking in. If you get a chance, would you run it in debug mode to see what happens then?
Andres
09-12-2012, 02:35 PM
Ah man, any way to disable that drop until I can fix it? It is probably one of my failsafes kicking in. If you get a chance, would you run it in debug mode to see what happens then?
Good news:
If you don't want to get Anagogic orts as a drop from skilling or combat you can talk to Captain of the Guard found in Clan Camp and select "How do I stop getting anagogic orts?" You will get a message saying "Are you sure you want to turn OFF anagogic ort drops?" to which you would reply with yes.
Looks like it's an easy fix ;)
Ashaman88
09-12-2012, 03:04 PM
Good news:
Looks like it's an easy fix ;)
Yahoo! Will probably just put that in the OP for the directions
Andres
09-12-2012, 03:23 PM
Unfortunately, I am having a few issues. Randomly, the script will not recognize that a door is built and will just right click the butler and click fetch from bank but won't select any of the options, and it will just repeat that over and over. Occasionally, it will select the room hotspot instead of the door hotspot and get stuck at the new room build screen. Finally, it will attempt to talk to the butler without removing a door when the butler is on the other side of the door, and it will just get the you can't reach that text over and over.
I'm at work so I don't really have too much time to troubleshoot. I'm going to switch to your larder script for now, which is working quite nicely.
Ashaman88
09-12-2012, 04:00 PM
Unfortunately, I am having a few issues. Randomly, the script will not recognize that a door is built and will just right click the butler and click fetch from bank but won't select any of the options, and it will just repeat that over and over. Occasionally, it will select the room hotspot instead of the door hotspot and get stuck at the new room build screen. Finally, it will attempt to talk to the butler without removing a door when the butler is on the other side of the door, and it will just get the you can't reach that text over and over.
I'm at work so I don't really have too much time to troubleshoot. I'm going to switch to your larder script for now, which is working quite nicely.
Hmm mind posting a pic of where you are standing when running it?
Andres
09-12-2012, 08:41 PM
Hmm mind posting a pic of where you are standing when running it?
If I get a chance I will. I'm pretty sure that I was in the right spot, but I may have misread the directions.
rudeboy99999
09-19-2012, 11:23 PM
this script is absolutely flawless, by far the fastest and most efficient iv ever used
quick proggie (exp is still rising, i expect to peak at about 6hours - 410-420k exp hour
=========AshamanDoorer==========
=========Version: 1.11==========
Mode: HyperDrive
Time Running: 1 Hours, 29 Minutes and 23 Seconds
Experience Earned: 580800
Experience/Hour: 389841
Doors/H: 650
================================
Ashaman88
09-20-2012, 02:48 PM
this script is absolutely flawless, by far the fastest and most efficient iv ever used
quick proggie (exp is still rising, i expect to peak at about 6hours - 410-420k exp hour
=========AshamanDoorer==========
=========Version: 1.11==========
Mode: HyperDrive
Time Running: 1 Hours, 29 Minutes and 23 Seconds
Experience Earned: 580800
Experience/Hour: 389841
Doors/H: 650
================================
Very nice! Looks like you have a good connection!
Excel
09-23-2012, 09:51 PM
Hey Ashaman, How can I get the EXP Rates to show on my Simba?
Currently it shows 0 Xp/Hr and 0 XP Gained. Is there a way I can enable it?
http://i50.tinypic.com/2q3q1lk.png
Ashaman88
09-23-2012, 09:59 PM
Hey Ashaman, How can I get the EXP Rates to show on my Simba?
Currently it shows 0 Xp/Hr and 0 XP Gained. Is there a way I can enable it?
http://i50.tinypic.com/2q3q1lk.png
Yes sir, have your top xp bar set to total or construction xp - and it can't say 'lots'!
Ashaman88
09-24-2012, 10:55 PM
V1.14 - errrr not sure why skipped so many versions lol, but this one has a time to run option, more human mouse movements, random mini breaks built in every once in awhile(antiban)
Excel
09-25-2012, 12:20 AM
Im assuming this version is for the new BotWatch update?
Ashaman88
09-25-2012, 12:35 AM
Im assuming this version is for the new BotWatch update?
in anticipation yeah, but can't tell until we test!
therealdeal
10-08-2012, 12:17 AM
hey man i started using this script but am starting to have probs and dont know why. id run it in hypermode but it starts loosing the door, when i tried without hyper mode it just sits there and has the pointer over the stairs. i followed the instruction to the dot, even thought it may have been what i was wearing so i changed to nothing or multiple clothing options but nothing... heres a pic of where i stand
http://i1359.photobucket.com/albums/q783/therealdealx69/oakdoorer_zpsa3fc1072.jpg
im still new to scripts and how they fully work so not sure if im missing something...
Ashaman88
10-08-2012, 03:23 AM
hey man i started using this script but am starting to have probs and dont know why. id run it in hypermode but it starts loosing the door, when i tried without hyper mode it just sits there and has the pointer over the stairs. i followed the instruction to the dot, even thought it may have been what i was wearing so i changed to nothing or multiple clothing options but nothing... heres a pic of where i stand
http://i1359.photobucket.com/albums/q783/therealdealx69/oakdoorer_zpsa3fc1072.jpg
im still new to scripts and how they fully work so not sure if im missing something...
looks like it should be ok. Mind posting your graphics settings? Are you running it with smart?
therealdeal
10-08-2012, 05:31 AM
heres the pic of my settings... running in safe mode and yes through smart... the oak larder script worked great... dont know what im doing wrong on this one...
http://i1359.photobucket.com/albums/q783/therealdealx69/graphics_zps0ee0385b.jpg
Ashaman88
10-08-2012, 11:56 PM
hmm what house type do you have?
Going to use this on my skiller again! Message me on Skype whenever you're free, I'll donate a bit more =)
Ashaman88
10-09-2012, 01:18 AM
Going to use this on my skiller again! Message me on Skype whenever you're free, I'll donate a bit more =)
Nice, let me know if it has problemos with you! And for sure will message ya thanks!
Get payed this thursday. Do you accept donations? :)
Ashaman88
10-10-2012, 02:14 AM
Get payed this thursday. Do you accept donations? :)
PM for gp donations and for $$ donations there is a sweet donate button on the OP of my script threads. Thanks man!
Austin
10-11-2012, 10:07 PM
I'm planning on using this script for the upcoming bxp weekend :p. Hopefully it works as well as your larder script. I haven't gotten to try this one out yet.
Ashaman88
10-12-2012, 12:53 AM
I'm planning on using this script for the upcoming bxp weekend :p. Hopefully it works as well as your larder script. I haven't gotten to try this one out yet.
Oh snap construction scripts gonna be used like crazy lol. Will make sure it's in top shape for bxp. You will get insane xp rates!
Austin
10-12-2012, 02:15 AM
Oh snap construction scripts gonna be used like crazy lol. Will make sure it's in top shape for bxp. You will get insane xp rates!
Haha, gl on improving it lol. Hopefully I can get a flawless run then ;)
There is no upcoming bonus exp...? lol -.-...
Austin
10-12-2012, 08:17 PM
There is no upcoming bonus exp...? lol -.-...
http://services.runescape.com/m=news/halloween-treat-scary-bonus-xp-weekend
^^^^^^^^^^
http://services.runescape.com/m=news/halloween-treat-scary-bonus-xp-weekend
^^^^^^^^^^
Wow fucking jagex... Thought they said that they are not doing them anymore...
Austin
10-12-2012, 09:39 PM
Wow jagex... Thought they said that they are not doing them anymore...
Are you surprised? lol
Ashaman88
10-14-2012, 02:48 PM
V1.15 - didn't like how old system worked, so I did a re-write. probs fixed a few others things
b/c I <3 you's guys. Was getting over 400k easy peezy
=========AshamanDoorer==========
=========Version: 1.14==========
Mode: HyperDrive
Time Running: 10 Minutes and 25 Seconds
Experience Earned: 70800
Experience/Hour: 407186
Doors/H: 679
================================
Austin
10-14-2012, 07:17 PM
V1.15 - didn't like how old system worked, so I did a re-write. probs fixed a few others things
b/c I <3 you's guys. Was getting over 400k easy peezy
Thanks! :D I'll test this out soon to use for BXP weekend.
Ashaman88
10-14-2012, 07:38 PM
Thanks! :D I'll test this out soon to use for BXP weekend.
Please do, it will blow yer mind!
Latest version dosent work, It just sits there, and logs out :S
Ashaman88
10-15-2012, 10:51 AM
Latest version dosent work, It just sits there, and logs out :S
Turn on debug mode and tell me what it says. Also post a pic of where you are
tried debug is well, it just doesnt run =/
previous version is flawless, just too many breaks too, so I am standing in right spot
Ashaman88
10-15-2012, 04:11 PM
tried debug is well, it just doesnt run =/
previous version is flawless, just too many breaks too, so I am standing in right spot
No i mean what does the debug say when you run it? The pic would help a lot too - I may have needed to grab more colors.
No i mean what does the debug say when you run it? The pic would help a lot too - I may have needed to grab more colors.
It says that it will run for next 8 hours, and like 20 seconds laters says loging out, something is wrong with colours :S
Ashaman88
10-16-2012, 11:41 AM
It says that it will run for next 8 hours, and like 20 seconds laters says loging out, something is wrong with colours :S
Will you post a pic of it pleases
Ashaman88
10-16-2012, 10:15 PM
V1.16 - fixed the issue if using different house designs
See if that fixed your problemo
That works now, but crashes after 1 hour ~, V-14 is still best so far :p 6 hours run time all the time
Ashaman88
10-18-2012, 02:55 PM
That works now, but crashes after 1 hour ~, V-14 is still best so far :p 6 hours run time all the time
Gotta give me more than that man! What exactly happens?
Gotta give me more than that man! What exactly happens?
It Just stops
=======AshamanDoorer==========
=========Version: 1.14==========
Mode: HyperDrive
Time Running: 21 Minutes and 6 Seconds
Experience Earned: 61800
Experience/Hour: 175718
Doors/H: 293
================================
Walk here / 2 more options
Something went wrong, checking for open door
Didnt find open door, shutting down
Successfully executed.
Ashaman88
10-18-2012, 10:15 PM
It Just stops
=======AshamanDoorer==========
=========Version: 1.14==========
Mode: HyperDrive
Time Running: 21 Minutes and 6 Seconds
Experience Earned: 61800
Experience/Hour: 175718
Doors/H: 293
================================
Walk here / 2 more options
Something went wrong, checking for open door
Didnt find open door, shutting down
Successfully executed.
Was the door built or empty when it failed?
And what house design do you have?
Edit: What version are you using? That text about the open door was removed a few versions ago
Ashaman88
10-19-2012, 01:21 AM
V1.17 - small tweak and failsafe
Guys i think this is a keeper. Please test it out before bxp weekend. 2496, make sure you test this version
=========Version: 1.17==========
Mode: HyperDrive
Time Running: 35 Minutes and 10 Seconds
Experience Earned: 237600
Experience/Hour: 405347
Doors/H: 676
================================
Austin
10-20-2012, 06:19 PM
Hey I just tested this script for the first time. It was working great for about three minutes, but then when my demon butler wanted to get paid, the script started spam clicking him, then moving to the right, then back to the empty door spot then right clicked on it then started spam clicking the butler. It did this for about 2 minutes before it stopped. My compass setting is on east. Also the first time my butler wanted to get paid it worked fine, so idk what went wrong >.<.
PS: I'm on hyper mode too, my connection/world is pretty much lag free, so I don't think that's the problem =/
EDIT: Also I had 2 sacred clay hammers in my invo, 1st spot was a tele tab and 2nd and 3rd spots were the hammers.
Yeah, problam with butler when needs to be paid, sometimes it just spams it-.-...
Austin
10-20-2012, 10:10 PM
It was working fine for me then 30 minutes after I restarted it. Didn't want to run much longer because I'm trying to save as many planks as I can for BXP weekend.
Ashaman88
10-20-2012, 11:15 PM
It has to do with inventory count, are y'all both using hammers? I didn't add a fail safe for that dang will do
Edit: adding a failsafe really quick. It does that because it thinks you may have been interrupted from building a door by the butler (happens every now and then)
Ashaman88
10-20-2012, 11:56 PM
V1.18 - fixed bug where spam click butler
so now it should only left click the butler once (no spam click)
Austin
10-21-2012, 12:47 AM
Thanks :). I won't be able to test until BXP though =/
Ashaman88
10-21-2012, 01:08 AM
Thanks :). I won't be able to test until BXP though =/
How could you! haha jk well it should be good to go
Ill test it :S And no, not using hammers lol
exp/h was insane on last version, just stability was the issue :S
Ashaman88
10-21-2012, 08:58 PM
Ill test it :S And no, not using hammers lol
exp/h was insane on last version, just stability was the issue :S
Let me know! Logicwise it should be good.
Parfilo
10-22-2012, 01:22 PM
I will really need this script for double xp weekend!
Ashaman88
10-22-2012, 03:50 PM
I will really need this script for double xp weekend!
Hopefully it dominates for you!
Parfilo
10-22-2012, 09:44 PM
For some reason none of my scripts work at the moment. Looks like some kind of update is needed, but could someone fill me in on what's going on? Or give me a thread link where I can find out?
Ashaman88
10-22-2012, 09:48 PM
For some reason none of my scripts work at the moment. Looks like some kind of update is needed, but could someone fill me in on what's going on? Or give me a thread link where I can find out?
Is it the login bug?
Parfilo
10-23-2012, 01:25 AM
Yeah, should that be resolved soon?
30 defence
10-23-2012, 10:40 PM
ashaman, I LOVE YOU...with extra homo 300k an hour!
Ashaman88
10-23-2012, 10:56 PM
Yeah, should that be resolved soon?
Yes there is a temp fix around the forums. But if it hasn't been officially updated yet I would imagine it would be realllly soon
ashaman, I LOVE YOU...with extra homo 300k an hour!
haha thanks man
Parfilo
10-24-2012, 12:28 AM
Could you direct me to the fix please? I'm a derp.
superbuster4
10-24-2012, 05:15 PM
going to be using this like a boss over the weekend :D
The Killer
10-25-2012, 05:13 PM
Ill be using this for 67 construction :D
Austin
10-25-2012, 06:59 PM
Ill be using this for 67 construction :D
Unless you're trollin', you know you need 74 con for oak doors right?
The Killer
10-25-2012, 07:03 PM
Unless you're trollin', you know you need 74 con for oak doors right?
oppsy yea, meant to put on the oak larder script..
Ashaman88
10-25-2012, 07:04 PM
Unless you're trollin', you know you need 74 con for oak doors right?
haha ouch fail! Oh well he does have larders! Also I will double check and make sure the update this past week didn't mess anything up with colors tonight
Austin
10-25-2012, 07:13 PM
oppsy yea, meant to put on the oak larder script..
Haha, I thought you probably did. ;)
Ashaman88
10-26-2012, 12:57 AM
Nothing changed from the update this week, still running well! But i did do a slight update b/c I was testing it on a lrc world (super laggy)
V1.19 - one tweak for if you lag, will make going to next step faster (only helpful for those with laggy connection)
MeepZorz
10-27-2012, 06:42 PM
Exception in Script: Unable to find file 'SRL/SRL/Misc/SmartGraphics.Simba' used from 'C:\Simba\Scripts\AshamanDoorerV1_19.simba'
anyway you could help me? :/
Ashaman88
10-27-2012, 06:45 PM
Exception in Script: Unable to find file 'SRL/SRL/Misc/SmartGraphics.Simba' used from 'C:\Simba\Scripts\AshamanDoorerV1_19.simba'
anyway you could help me? :/
Sounds like you don't have your srl updated try updating your stuff
MeepZorz
10-27-2012, 06:55 PM
Nevermind i found it out. awesome script so far :)
MeepZorz
10-27-2012, 06:56 PM
and yeah your right didnt think to update the exstensions :duh:
Parfilo
10-27-2012, 07:04 PM
I'm definitely gonna use this with my 9k oak planks :) I'll post the double xp proggy
Ashaman88
10-27-2012, 08:15 PM
and yeah your right didnt think to update the exstensions :duh:
Glad you got it figured out!
I'm definitely gonna use this with my 9k oak planks :) I'll post the double xp proggy
Will be great to see that insane xp!
30 defence
10-27-2012, 08:40 PM
it says im doing 742 doors/hour but is that just because double exp? does the proggy add the double exp? if so im only getting 440k on double exp
Ashaman88
10-27-2012, 08:45 PM
it says im doing 742 doors/hour but is that just because double exp? does the proggy add the double exp?
The doors may be wrong but the xp is accurate based off the xp bar. I think I based the doors count on how much xp gained not positive though
Not sure what's up, but keep getting this error:
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(279:145): Invalid number of parameters at line 278
I updated Simba too. Am I doing something wrong?
Ashaman88
10-28-2012, 12:08 AM
Not sure what's up, but keep getting this error:
I updated Simba too. Am I doing something wrong?
You need to delete the -1 thing if you are using smart 8.0
You need to delete the -1 thing if you are using smart 8.0
I think I may have tried to install Smart 8.0 at some point, so I just decided to re-install Simba and it's loading up now :)
I'll be posting a progress report shortly.
COODA I
10-28-2012, 12:59 AM
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 4 Hours, 29 Minutes and 56 Seconds
Experience Earned: 2175600
Experience/Hour: 483571
Doors/H: 806
================================
beautiful script! Will post another if I can get to 6 hours... not sure I have enough planks! AMAZING xp and very well scripted. Good job sir!
Ashaman88
10-28-2012, 01:27 AM
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 4 Hours, 29 Minutes and 56 Seconds
Experience Earned: 2175600
Experience/Hour: 483571
Doors/H: 806
================================
beautiful script! Will post another if I can get to 6 hours... not sure I have enough planks! AMAZING xp and very well scripted. Good job sir!
Wow that is insane! Will add that to OP for sure!
Mjordan
10-28-2012, 01:56 AM
Great script Asha. As you know, my laptop is super laggy haha so the xp rate isn't the best. I've gained over 4m xp today, here's one of my better proggies.
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 33 Minutes and 35 Seconds
Experience Earned: 726000
Experience/Hour: 465395
Doors/H: 776
================================
Praize
10-28-2012, 02:58 AM
Doing this method on double xp! Its about the same xp rate, because the lag on every world is so great.
Ashaman88
10-28-2012, 03:49 AM
Great script Asha. As you know, my laptop is super laggy haha so the xp rate isn't the best. I've gained over 4m xp today, here's one of my better proggies.
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 33 Minutes and 35 Seconds
Experience Earned: 726000
Experience/Hour: 465395
Doors/H: 776
================================
Doing this method on double xp! Its about the same xp rate, because the lag on every world is so great.
Still not bad! Stinks about the lag though
dc686
10-28-2012, 04:02 AM
just curious what happens to the 6 planks the bulter constanly has when u send him for more planks do they disapear or do they just go back to the bank(im assuming they go back to the bank) and why have it withdraw 26 not 20?
Ashaman88
10-28-2012, 04:04 AM
just curious what happens to the 6 planks the bulter constanly has when u send him for more planks do they disapear or do they just go back to the bank(im assuming they go back to the bank) and why have it withdraw 26 not 20?
There are rare times when it messes up and will need to click on the butler to get those extra planks, but yeah it just goes back to your bank
dc686
10-28-2012, 04:06 AM
ok thats all i wondered was kinda worried about those planks just comming up missing lol but love the script
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: Normal
Time Running: 36 Minutes and 41 Seconds
Experience Earned: 212400
Experience/Hour: 347312
Doors/H: 579
================================
have hyper turned off due to laggy of bonus xp weekend still going to help me get closer to 99 con thanks alot for all ur hard work
daarth
10-28-2012, 05:03 AM
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 3 Hours, 28 Minutes and 35 Seconds
Experience Earned: 1710000
Experience/Hour: 491873
Doors/H: 820
================================
4 million xp so far from double xp thanks bro
Mr[S]
10-28-2012, 08:32 AM
The lag is gone so after 99 craft ill have around 12 hours to get 99 construction...everything works fine with the download right? Doesn't need any fixing because would rather get the script ready now than messing around with it if anything goes wrong like yesterday with the lag :(
dc686
10-28-2012, 08:49 AM
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: Normal
Time Running: 4 Hours, 15 Minutes and 39 Seconds
Experience Earned: 1310400
Experience/Hour: 307531
Doors/H: 513
================================
longest one running going to turn off for a while now
will probly but back on tomarrow
Ashaman88
10-28-2012, 11:39 AM
The lag is gone so after 99 craft ill have around 12 hours to get 99 construction...everything works fine with the download right? Doesn't need any fixing because would rather get the script ready now than messing around with it if anything goes wrong like yesterday with the lag :(
Nope as long as you set it up like OP!
And awesome proggies everyone!
quick bxp proggy, Time ran is 6 minutes off btw so should be at 549k xp/hr
btw occasionally about ~1/3 of the time the bot fails to build the 2nd door in time before the demon comes and interrupts the
build interface. I think the lag is to blame
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 50 Minutes and 48 Seconds
Experience Earned: 428400
Experience/Hour: 505964
Doors/H: 843
================================
vladko78
10-28-2012, 01:57 PM
this script is amazing
Enslaved
10-28-2012, 01:58 PM
this script is amazing
Ofc it is, ashman's Script maker did it, it churns out perfect scripts like no tomorrow
zack200
10-28-2012, 03:06 PM
Huh. Is there anyway to give it the ability to use sacred hammers? On another note, the script is performing flawlessly <3
Horatio
10-28-2012, 03:10 PM
Why is everyone getting so few doors per hour? Hyperdrive mode works flawless. Great script!
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 2 Hours, 49 Minutes and 38 Seconds
Experience Earned: 2026800
Experience/Hour: 716830
Doors/H: 1195
================================
Still running, going for 99 con this weekend.
Mr[S]
10-28-2012, 03:57 PM
Why is everyone getting so few doors per hour? Hyperdrive mode works flawless. Great script!
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 2 Hours, 49 Minutes and 38 Seconds
Experience Earned: 2026800
Experience/Hour: 716830
Doors/H: 1195
================================
Still running, going for 99 con this weekend.
If you didn't realise there was majour lag issues with jagex's servers in all worlds which made scripts really slow and clicking was off, basically most people had to edit their waits on their scripts to stop misclicks, jagex has fixed the lag issue that's why it works perfect for you from older posts :)
Austin
10-28-2012, 04:19 PM
I can't seem to run this script for a very long time without it stopping =/. I tried it with hyperdrive on and with it off. One time I saw it mess up, it tried to make the demon butler fetch more planks from the bank when he was behind a door that was already made. So it couldn't reach him. I'm not sure if the same thing happened the two other times I didn't catch it. What direction is your guys' compass facing? Mines facing east, idk if that affects anything. I'm crafting atm, because I'm not going to be at the computer much right now. I was gonna try it again later.
EDIT: Btw, the Jagex didn't fix the lag.. less people just where on the servers. Now it's back same as yesterday because more people are on again
Mjordan
10-28-2012, 06:27 PM
If you don't have a very good computer on a low ping world then you'll only get around 400-450k xp/hour from this script. But heck, that's still a lot! Started at level 70 yesterday, and now I only have roughly 4m xp until 99 =P
Mr[S]
10-28-2012, 06:31 PM
If you don't have a very good computer on a low ping world then you'll only get around 400-450k xp/hour from this script. But heck, that's still a lot! Started at level 70 yesterday, and now I only have roughly 4m xp until 99 =P
Does that take into account the lag there is at the moment?
YerAwsum
10-28-2012, 07:45 PM
Does anybody run pass the 6 hour mark? How? Do you use SMART Manager?
Also, does anybody else get this error sometimes:
Something messed up, shutting down
Successfully executed.
Is it possible to get to 99 from 80 from now till end of BXP weekend? Trying to save costs! :P
Austin
10-28-2012, 07:53 PM
Does anybody run pass the 6 hour mark? How? Do you use SMART Manager?
Also, does anybody else get this error sometimes:
Something messed up, shutting down
Successfully executed.
Is it possible to get to 99 from 80 from now till end of BXP weekend? Trying to save costs! :P
You can't run past the six hour mark for this script because once you log out, it puts you outside of your house again. Unless you pause the script and restart your client.
And no, it's not possible to get 99 from 80 at this point. There's only about 16 hours left for dxp, and max I think you can make is like 500-600k per hour with the lag, so only like 8.8mil in that time. You'd be like 1-2mil off, you'd get close though ;)
Referring to my earlier post, the script is now working fine for me. Once the game started lagging it began to work for some reason lol. I'm making about 500k xp an hour atm.
YerAwsum
10-28-2012, 08:45 PM
I see.
When I run this on my computer, I get about 600-700 doors per hour, about 400k-500k xp per hour. Right now it's 400k xp, so I'm not sure why I'm not getting the 500k-600k you were mentioning.
Although I am not going to complain since 400k xp is still good :P Just want to utilize BXP to the max, since it doesn't reduce :D
When I run it on my VPS, I get 200 doors per hour :( Significant decrease, though probably because of the lag. Although it doesn't seem really laggy, I can actually play the game on my VPS (pretty smooth)
Just an observation.
Ashaman88
10-28-2012, 10:02 PM
Why is everyone getting so few doors per hour? Hyperdrive mode works flawless. Great script!
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 2 Hours, 49 Minutes and 38 Seconds
Experience Earned: 2026800
Experience/Hour: 716830
Doors/H: 1195
================================
Still running, going for 99 con this weekend.
That is more like it! Very nice!
Huh. Is there anyway to give it the ability to use sacred hammers? On another note, the script is performing flawlessly <3
You should be able to have 1 or two hammers in inventory
I see.
When I run this on my computer, I get about 600-700 doors per hour, about 400k-500k xp per hour. Right now it's 400k xp, so I'm not sure why I'm not getting the 500k-600k you were mentioning.
Although I am not going to complain since 400k xp is still good :P Just want to utilize BXP to the max, since it doesn't reduce :D
When I run it on my VPS, I get 200 doors per hour :( Significant decrease, though probably because of the lag. Although it doesn't seem really laggy, I can actually play the game on my VPS (pretty smooth)
Just an observation.
It goes as fast as it can I promise!
Sorry there are too many posts to address them all right now, but the timing is based on when actions actually happen. so when you build a door, it will wait however long it takes for the door to show up before removing it. Lag just makes each step take longer!
daarth
10-29-2012, 01:01 AM
script got me from 80 to 98 in 2 days and in a few hours i will have 99 great script.
Duhlucks
10-29-2012, 02:14 AM
script got me from 80 to 98 in 2 days and in a few hours i will have 99 great script.
Yours doesn't misclick? I leave it go for a while and I come back to it and its trying to add a statue/guardian to the room.
COODA I
10-29-2012, 02:32 AM
script got me from 80 to 98 in 2 days and in a few hours i will have 99 great script.
Same here I went from 78-94 so far with this!
Yours doesn't misclick? I leave it go for a while and I come back to it and its trying to add a statue/guardian to the room.
Nope, do you have any free CPU?
Prometheus
10-29-2012, 02:41 AM
Went from 62-70 construction with this script :D Had a little trouble at the setup, but after 10 minutes I figured it out. Thanks for this!
Ashaman88
10-29-2012, 02:47 AM
Yours doesn't misclick? I leave it go for a while and I come back to it and its trying to add a statue/guardian to the room.
Never heard of that before. Mind posting where it ends up and where you start the script?
And congrats to everyone else! Glad you got some sweet xp!
Duhlucks
10-29-2012, 03:03 AM
Never heard of that before. Mind posting where it ends up and where you start the script?
I think I know what the problem was. It hasn't been doing it since I moved my guy to the right side of the door. Before I had my character facing the door from the left side.
Unknown
10-29-2012, 03:13 AM
Just got 88 construction! <3
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: Normal
Time Running: 1 Hours, 12 Minutes and 30 Seconds
Experience Earned: 639600
Experience/Hour: 529256
Doors/H: 882
================================
daarth
10-29-2012, 03:52 AM
got from 80-99 with this script big thanks :D
in 2 days D:
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 5 Hours, 19 Minutes and 45 Seconds
Experience Earned: 2847600
Experience/Hour: 534318
Doors/H: 891
================================
Mr[S]
10-29-2012, 06:56 AM
Woke up to find mine misclicking :(
Ashaman88
10-29-2012, 10:53 AM
got from 80-99 with this script big thanks :D
in 2 days D:
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 5 Hours, 19 Minutes and 45 Seconds
Experience Earned: 2847600
Experience/Hour: 534318
Doors/H: 891
================================
Very nice and congrats everyone!
Woke up to find mine misclicking :(
What do you mean ? Was it moved from its spot? What was it clicking on?
Mr[S]
10-29-2012, 11:13 AM
My found out what the problem was, my hair was the same colour as the doors so it was just clicking my head, put on helm now and got from 73-88 in a few hours sorry for no proggies though havn't had time trying to make most of this xp
Horatio
10-29-2012, 11:15 AM
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 23 Minutes and 7 Seconds
Experience Earned: 1143600
Experience/Hour: 825485
Doors/H: 1376
================================
99 construction! Thank you Ashaman :) Did about 9m xp in two days with this script.
awesomem8
10-29-2012, 11:25 AM
Thanks for this
Mr[S]
10-29-2012, 11:26 AM
added this:
Wait(Random(340));
to line 684 and get an extra 200k xp per hour.
Why lol?
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 14 Minutes and 50 Seconds
Experience Earned: 758400
Experience/Hour: 607980
Doors/H: 1013
================================
Thanks for for the 5m xp :)
vladko78
10-29-2012, 11:34 AM
thanks man for 99 cons
Ashaman88
10-29-2012, 12:41 PM
Wow awesome progress reports! Congrats guys!
awesomem8
10-29-2012, 12:46 PM
because normally the interface gets closed before it builds a 2nd door since the butler gives the logs at that exact moment, i either have to speed it up or slow it down so it will receive the logs a second before it builds a second door. I only know hot to slow it down hence the extra wait time.
Why lol?
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 14 Minutes and 50 Seconds
Experience Earned: 758400
Experience/Hour: 607980
Doors/H: 1013
================================
Thanks for for the 5m xp :)
Austin
10-29-2012, 02:38 PM
Thanks for the script! Managed to get me from 79-91 con ;). Sorry that I can't post any proggies =/
Ashaman88
10-30-2012, 12:42 AM
because normally the interface gets closed before it builds a 2nd door since the butler gives the logs at that exact moment, i either have to speed it up or slow it down so it will receive the logs a second before it builds a second door. I only know hot to slow it down hence the extra wait time.
Yeah that's what normal mode was for :)
Thanks for the script! Managed to get me from 79-91 con ;). Sorry that I can't post any proggies =/
Congrats man!
If you want to use sacred hammers its best to have 8 hammers (400kxp) in inventory and have your demon fetch 20 planks instead of 26 each time, but downside is you'll have to bank every 30minutes and get new hammers manually or the bot will continue w/o the hammers.
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 21 Minutes and 6 Seconds
Experience Earned: 285452
Experience/Hour: 811265
Doors/H: 1350
================================
Ashaman88
11-01-2012, 11:28 PM
If you want to use sacred hammers its best to have 8 hammers (400kxp) in inventory and have your demon fetch 20 planks instead of 26 each time, but downside is you'll have to bank every 30minutes and get new hammers manually or the bot will continue w/o the hammers.
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 21 Minutes and 6 Seconds
Experience Earned: 285452
Experience/Hour: 811265
Doors/H: 1350
================================
Sweet xp though! I need to add these great ones to the OP!
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 45 Minutes and 5 Seconds
Experience Earned: 747000
Experience/Hour: 426483
Doors/H: 711
================================
Incredible, 2m xp today in less than 5hours
Ashaman88
11-08-2012, 04:55 AM
=========AshamanDoorer==========
=========Version: 1.19==========
Mode: HyperDrive
Time Running: 1 Hours, 45 Minutes and 5 Seconds
Experience Earned: 747000
Experience/Hour: 426483
Doors/H: 711
================================
Incredible, 2m xp today in less than 5hours
Nice! Yeah once you get the supplies it burns through xp like crazy !
http://img831.imageshack.us/img831/8001/constructionn.png (http://img831.imageshack.us/i/constructionn.png/)
:)
Ashaman88
11-09-2012, 03:18 AM
http://img831.imageshack.us/img831/8001/constructionn.png (http://img831.imageshack.us/i/constructionn.png/)
:)
Congrats man! Yet another 99er!
saul goodman
11-19-2012, 07:02 AM
I haven't used Simba in awhile, mainly because of the annoying screen that Jagex implemented a while ago. But i recently checked back and i downloaded the lastest version but when trying to run this was hit with "Exception in Script: Unable to find file 'SRL/SRL/Misc/SmartGraphics.Simba'"
Did I forgot a step? It's been a while.
KingKong
11-19-2012, 07:05 AM
update your srl?
saul goodman
11-19-2012, 09:23 PM
i got the latest version of simba
Ashaman88
11-19-2012, 09:26 PM
i got the latest version of simba
No not simba, srl!
saul goodman
11-20-2012, 03:38 AM
well i feel dumb, thanks!
Ashaman88
11-20-2012, 05:00 AM
well i feel dumb, thanks!
It's all good!
Also no updates will be needed for this script from EOC
saul goodman
11-20-2012, 06:32 AM
slow start but once you get it set up, it's really good.
Thanks!
[Edit]
Just a thought but is it possible to use the regular butler instead? It would be more efficient cost-wise and time-wise. I have heard that the butler's banking time is just enough to make two oak doors so there is no wait time like for the demon butler. Also it's cheaper and grabs 20 oak planks whereas the demon butler has 6 leftover which we do nothing with. I understand if it's too much to ask but just a thought ^_^
Thanks once again!
Source: http://runescape.wikia.com/wiki/Butler
"Many players prefer the Butler over the Demon Butler for several reasons. First, the Butler is only slightly slower, yet is half the cost of the Demon butler. Because of this, the Butler's cost per item is only 32 coins (24 coins with Love Story) whereas the Demon butler's cost per item is 48 coins (36 coins with Love Story). Second, using the Butler often provides faster experience than the Demon butler. A player building oak dungeon doors will find that they can build two doors in the time that it takes the Butler to get planks from the bank, and finish just as the Butler returns. This allows for constant experience to be gained. However, the Demon Butler is too fast for this, and players will be interrupted if they try to build two oak doors while the Demon Butler is away."
Ashaman88
11-20-2012, 06:51 AM
slow start but once you get it set up, it's really good.
Thanks!
[Edit]
Just a thought but is it possible to use the regular butler instead? It would be more efficient cost-wise and time-wise. I have heard that the butler's banking time is just enough to make two oak doors so there is no wait time like for the demon butler. Also it's cheaper and grabs 20 oak planks whereas the demon butler has 6 leftover which we do nothing with. I understand if it's too much to ask but just a thought ^_^
Thanks once again!
Source: http://runescape.wikia.com/wiki/Butler
"Many players prefer the Butler over the Demon Butler for several reasons. First, the Butler is only slightly slower, yet is half the cost of the Demon butler. Because of this, the Butler's cost per item is only 32 coins (24 coins with Love Story) whereas the Demon butler's cost per item is 48 coins (36 coins with Love Story). Second, using the Butler often provides faster experience than the Demon butler. A player building oak dungeon doors will find that they can build two doors in the time that it takes the Butler to get planks from the bank, and finish just as the Butler returns. This allows for constant experience to be gained. However, the Demon Butler is too fast for this, and players will be interrupted if they try to build two oak doors while the Demon Butler is away."
I had forgotten about that. I probably will but also know that as long as you don't have super lag, this script does build 2 doors before he gets back. So reg butler would just be a money saver
redic
11-21-2012, 02:50 AM
Getting this message, I've updated all extensions.
Exception in Script: Unable to find file 'SRL/SRL.Simba' used from ''
Ashaman88
11-21-2012, 02:57 AM
Getting this message, I've updated all extensions.
You can't have updated srl bc it can't find the file. Did you hit srl>update?
redic
11-21-2012, 02:59 AM
Nevermind, AVG was blocking the update.
When I run the script it work perfectly then randomly stops.
Something went wrong, shutting down.
Ashaman88
11-21-2012, 01:30 PM
Nevermind, AVG was blocking the update.
When I run the script it work perfectly then randomly stops.
After how much time? Do you have your xp bar set to con or total and it doesn't say 'lots'? Post a pic of where you are standing, did you see it stop?
Laimonas171
11-21-2012, 04:19 PM
Ashaman88
How much oak planks for one doors to make are required?
Austin
11-21-2012, 04:21 PM
Ashaman88
How much oak planks for one doors to make are required?
10 planks= 1 door
Laimonas171
11-21-2012, 05:22 PM
10 planks= 1 door
I see, I wonder, do I have to have Oak PLANK at bank for this script or it's enough to have Oak logs? Since I don't do construction I don't know a lot I have ready wiki a bit, And I see that butler may make plank somehow? any Step by step easy guide?
Though Have Idea to create Plank maker script not for public release, maybe for member section.. though not sure or it's necessary to make one if this script (butler) makes planks from logs.
Ashaman88
11-21-2012, 05:24 PM
I see, I wonder, do I have to have Oak PLANK at bank for this script or it's enough to have Oak logs? Since I don't do construction I don't know a lot I have ready wiki a bit, And I see that butler may make plank somehow? any Step by step easy guide?
Though Have Idea to create Plank maker script not for public release, maybe for member section.. though not sure or it's necessary to make one if this script (butler) makes planks from logs.
Nope this one just gets planks from the bank, I think riwu has one that will also convert them to planks. Not positive though
Laimonas171
11-21-2012, 05:28 PM
Nope this one just gets planks from the bank, I think riwu has one that will also convert them to planks. Not positive though
I see planks are a bit to expensive :D though. 99m~ to get 99 level..
Let's say my current exp. 1,120,000
So i need 11,914,431 till 99 level.
I need to make 19,858 doors that is 190,858 planks (498gp each current price)
95,047,284gp..
Auch...
Ashaman88
11-21-2012, 05:40 PM
I see planks are a bit to expensive :D though. 99m~ to get 99 level..
Let's say my current exp. 1,120,000
So i need 11,914,431 till 99 level.
I need to make 19,858 doors that is 190,858 planks (498gp each current price)
95,047,284gp..
Auch...
Yeah it's an expensive skill :(
redic
11-21-2012, 05:44 PM
After how much time? Do you have your xp bar set to con or total and it doesn't say 'lots'? Post a pic of where you are standing, did you see it stop?
First time it ran for an hour and twenty mins, other two times didnt last longer than fifteen mins.
Use both xp bars as shown below, I have location set as "W"
I've seen it stop but havent seen nothing out the normal it just stands there until it logs out thats whens I get the error message.
Ashaman88
11-21-2012, 05:47 PM
Hmm try changing your house type to basic stone and see if that helps
saul goodman
11-22-2012, 08:35 PM
Smithing is a terribly expensive skill, con is a medium priced buyable imo.
Austin
11-22-2012, 11:46 PM
Smithing is a terribly expensive skill, con is a medium priced buyable imo.
Have you ever tried superheating?
viljo
12-10-2012, 08:56 PM
i got ge buying my planks (160k of em) would you train with oak doors or larders ? :o just asking so i know what script i should use
Mr[S]
12-10-2012, 09:11 PM
i got ge buying my planks (160k of em) would you train with oak doors or larders ? :o just asking so i know what script i should use
Doors = Tonnes faster
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.