PDA

View Full Version : [ProjectRS06] AwesomeRuneEssence



joulaha
01-17-2013, 07:39 PM
Joulaha here presenting my third script, rune essence miner and banker.

Start at varrock small bank...
http://localhostr.com/files/HRxraTP/capture.png

NO GUI.

If you have bug report do it correct form:
Bug:
Where?:
Doing what?:

example:
Bug: Doesn't walk to bank.
Where?: Stuck at aubury.
Doing what?: Moves mouse to minimap but doesnt click

drivebygangbang
01-17-2013, 07:45 PM
im going to try it out tomorrow, ill let you know, thanks for filling my req

Farnose
01-17-2013, 07:52 PM
nice release really like your scripts :D

Rs06tester
01-17-2013, 07:55 PM
testing Now.

joulaha
01-17-2013, 08:10 PM
Added 1 failsafe to make sure that it finds the way to aubury, not tested but method is same as going to bank, so i except it to work...

edit: reuploaded, typo fixed.

Edin
01-17-2013, 09:50 PM
Bug: doesnt mine
Where?:as soon as you tele
Doing what?: as soon as it teleports it just sits there

Janus
01-17-2013, 11:15 PM
Oh thank you so much, been needing one of these for a while now. I will get testing it and offer any suggestions if needed.

gstar
01-18-2013, 02:34 AM
Bug: doesnt mine
Where?:as soon as you tele
Doing what?: as soon as it teleports it just sits there

this for me aswell

joulaha
01-18-2013, 05:51 AM
I know where the problem is , fixing today later

Behenaut
01-18-2013, 05:56 AM
Bug: Doesn't teleport back
Where?: Essence mine teleport
Doing what?: It clicks in the minimap to go near the teleport however it doesn't actually click the teleport afterwards

Janus
01-18-2013, 08:10 AM
I got so many errors and bugs with this, mainly when teleporting out when a load is full, not repeating again after the bank, and a few missing sleep commands which send the script into overdrive and lag out my client. I have gone through it and modified a few bits and it seems to be working fine for me now.. I will post the code when i've tested it a little bit more.

Fletcherage
01-18-2013, 03:00 PM
Doesn't move after full inventory.

joulaha
01-18-2013, 03:09 PM
Im going rework on this now since i got fishing fixed finally :)

joulaha
01-18-2013, 04:17 PM
Fixed.

New version and picture where to start out now!

Rs06tester
01-18-2013, 04:31 PM
For me it doesn't walk to the Mage icon it walkes to the bar.

joulaha
01-18-2013, 04:33 PM
For me it doesn't walk to the Mage icon it walkes to the bar.
wtf, ill do hotfix for that now!

Rs06tester
01-18-2013, 04:35 PM
For me it doesn't walk to the Mage icon it walkes to the bar.

http://i45.tinypic.com/14vsmwz.jpg

When the gate is open it goes to the bar.

joulaha
01-18-2013, 04:59 PM
Found a fix to that, testing soon as update completes so i can test run it.

Behenaut
01-18-2013, 08:46 PM
perhaps you should see this:
http://villavu.com/forum/showthread.php?t=71461&highlight=private+server

To make the paths, it's simple and easy. That way you'll have time to polish this script in other aspects

mozz skiller
01-18-2013, 11:06 PM
I have the thing downloaded but what program do I use to open it?

hellothere
01-19-2013, 03:12 AM
I got so many errors and bugs with this, mainly when teleporting out when a load is full, not repeating again after the bank, and a few missing sleep commands which send the script into overdrive and lag out my client. I have gone through it and modified a few bits and it seems to be working fine for me now.. I will post the code when i've tested it a little bit more.
do you think maybe you could post the code as my client also laggs out when i try to run the script.

Janus
01-19-2013, 03:54 AM
do you think maybe you could post the code as my client also laggs out when i try to run the script.

This is this script with a few tweaks, hope the original guy doesn't mind! Most of the credit goes to him.

program AwesomeRuneEssence;
{$i srl/srl.simba}

var
EnoughOfThis,TultaFound,AuburyFound,InventoryFull, PortalFound,Teleportilla,Enough,PuskaFound,KivetFo und,PankkiFound:Boolean;
X,Y,Tulta,TeleportThere,Portal,Teleportti,Pankki,P uska,Kivet:Integer;

procedure BitmapsHere;
begin
Tulta := BitmapFromString(4, 4, 'meJyTK/qrrvlNruivwNJ/EAaEDWfA' +
'xSFsAEhKGOA=');
TeleportThere := BitmapFromString(37, 4, 'meJxzD4l1x43+gwEDAwMeNeSh/0g' +
'Al3VY1ZAtzgAGyLLI1hFUQ6Q4LmNpwQYApr3tGQ==');
Portal := BitmapFromString(8, 8, 'meJxjZGDYjwoYGRgYUQWl0+9AEJpK' +
'oEhqsTOmFJDrE2UIl0JGQHGIFIQBR5giaEhNSwsZwcUBqDxSh Q==');
Teleportti := BitmapFromString(11, 11, 'meJx90N8KgjAchuH7vwzbapQHaU' +
'PG5kjLw0mgdeaJl9JHX45VErz8Tvawf8q0ZT/KynPGNtqxnWmQm+Y' +
'vEI0yDRLarxjt0N5ekL49wDiB5ZJYAPdh8gN4gm11ZnaaizCK 15JY' +
'A0UYcDHON3BXpEwbO/V34mMYMtzhB6RvgTnUXV53KUg/DQflf0FW2' +
'idscAIH');
Pankki := BitmapFromString(16, 3, 'meJxj+vOH4etXhrt3hf/9YyLEZmR' +
'gALHfvmU4cwbIIMjOyCgA6gIygBqBiCAbqB4AOYxIFA==');
Puska := BitmapFromString(10, 10, 'meJxdjjEKgDAMRTu5ODq7ujkKns' +
'LrqtVCURRP0zP48EMIwuPT5CWhMZ7xY1kPY16yoF/1o2wzTLI8fpa' +
'OLCXIpnTXXUtu+4UlUZayQInVorfC+lLe2k1DYzk/oC9xn1RHlFLs' +
'LWsDqBCCH/BbqBexrp83');
Kivet := BitmapFromString(11, 9, 'meJxzsLNzAKOp0xYCkQOMGx4RAWF' +
'oaGjAZYFo1uxlEBEIWrhw7YQJc4AiyAogaiAAqABZO1wBBAFl IQqA' +
'1kEQUHD+/NUQhCyOjIBScDfgUoBVFiIItALZm3BxCIJbjRYOAPW+c1U=');
end;
procedure FreebitmapsNow;
begin
FreeBitmap(Tulta);
FreeBitmap(TeleportThere);
FreeBitmap(Portal);
FreeBitmap(Teleportti);
FreeBitmap(Pankki);
FreeBitmap(Puska);
FreeBitmap(Kivet);
end;

procedure StartBotting; forward;

procedure GoToBank;
begin
writeln('Walking to bank')
mMouse(666+7,20,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
sleep(9500);

PankkiFound := false;

repeat
if FindBitmapToleranceIn(Pankki, X, Y, 520, 0, 760, 210, 20)then
begin
writeln('Found Bank')
PankkiFound := true;
mMouse(X+10,Y-5,1,1)
sleep(500);
ClickMouse(X,Y,Mouse_Left)
sleep(10500+Random(1000));
end;
until PankkiFound

mMouse(255,195,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Right)
sleep(750);
mMouse(255,230,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
sleep(1500);

mMouse(710,390,1,1);
sleep(500);
writeln('Banking Essence');
ClickMouse(X,Y,Mouse_Right)
sleep(250);
ClickMouse(X,Y,Mouse_Left)
writeln('Run Done');
StartBotting;

end;

procedure GoToAubury;
begin
TultaFound := false;
repeat
if FindBitmapToleranceIn(Tulta, X, Y, 520, 0, 760, 210, 20)then
begin
writeln('Walking to Aubury');
mMouse(X,Y+7,1,1);
sleep(1000);
ClickMouse(X,Y,Mouse_Left)
TultaFound := true;
end else
begin
mMouse(666,100,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
end;
until TultaFound
end;
procedure TalkToAubury;
begin
AuburyFound := false;
repeat
if (TultaFound = true) then
begin
repeat
mMouse(255,130,1,1);
ClickMouse(X,Y,Mouse_Right)
sleep(750);
if FindBitmapToleranceIn(TeleportThere, X, Y, 0, 0, 520, 340, 20)then
begin
sleep(500);
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
AuburyFound := true;
end else
mMouse(100,100,15,15);
sleep(1000);
mMouse(300,130,1,1);
ClickMouse(X,Y,Mouse_Right)
sleep(750);

if FindBitmapToleranceIn(TeleportThere, X, Y, 0, 0, 520, 340, 20)then
begin
sleep(500);
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
AuburyFound := true;
end else
mMouse(100,100,15,15);
sleep(1000);
mMouse(255,170,1,1)
ClickMouse(X,Y,Mouse_Right)

if FindBitmapToleranceIn(TeleportThere, X, Y, 0, 0, 520, 340, 20)then
begin
sleep(500);
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
AuburyFound := true;
end else
mMouse(100,100,15,15);
sleep(1000);
mMouse(300,170,1,1)
ClickMouse(X,Y,Mouse_Right)
sleep(750);

if FindBitmapToleranceIn(TeleportThere, X, Y, 0, 0, 520, 340, 20)then
begin
sleep(500);
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
AuburyFound := true;
end else
mMouse(100,100,15,15);
sleep(1000);
mMouse(295,130,1,1);
ClickMouse(X,Y,Mouse_Right)
sleep(750);

if FindBitmapToleranceIn(TeleportThere, X, Y, 0, 0, 520, 340, 20)then
begin
sleep(500);
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
AuburyFound := true;
end else
mMouse(100,100,15,15);
sleep(1000);
mMouse(285,130,1,1);
ClickMouse(X,Y,Mouse_Right)
sleep(750);

if FindBitmapToleranceIn(TeleportThere, X, Y, 0, 0, 520, 340, 20)then
begin
sleep(500);
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
AuburyFound := true;
end;

until AuburyFound
end;
until AuburyFound
end;
procedure GoToKivet;
begin
mMouse(680,23,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_left)
sleep(5500);
mMouse(368,100,10,10);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
end;
procedure GoToPuska;
begin
PuskaFound := false;
repeat
if FindBitmapToleranceIn(Puska, X, Y, 520, 0, 760, 210, 20)then
begin
PuskaFound := True;
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_left);
sleep(3500);
end;
until PuskaFound
end;
procedure GoToPortal;
begin
PortalFound := false;
Teleportilla := false;
repeat
if FindBitmapToleranceIn(Portal, X, Y, 520, 0, 760, 210, 20)then
begin
PortalFound := true;
mMouse(X,Y+12,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
sleep(5500);
Repeat
sleep(1000)
if FindColortolerance(x, y, 12909307, 0, 0, 520, 340, 20)then
begin
mMouse(X,Y,1,1);
sleep(500);
ClickMouse(X,Y,Mouse_Left)
sleep(2000);
GoToBank;
end;
until Teleportilla
end;
until PortalFound
end;
procedure CheckInventory;
begin
InventoryFull := false;
repeat
sleep(3000);
if FindColorSpiralTolerance(x, y, 7500667, 690, 425, 735, 470, 3) then
begin
WriteLn('Invy full');
InventoryFull := true;
GoToPortal;
end;
until InventoryFull
end;
procedure StartBotting;
begin

repeat
writeln('starting');
GoToAubury;
sleep(17000);
TalkToAubury;
sleep(3000);
GoToPuska;
GoToKivet;
sleep(3000);
sleep(500);
CheckInventory;
until (false)
end;


begin
ClearDebug;
MouseSpeed := 15;
SetUpSRL;

BitmapsHere;

StartBotting;

FreebitmapsNow;
end.

joulaha
01-19-2013, 08:58 AM
This is this script with a few tweaks, hope the original guy doesn't mind! Most of the credit goes to him.

[/SIMBA]

Clap clap clap!
Goodjob :)

Hexless
01-19-2013, 11:17 AM
when it goes to mine it clicks that little bush like thing thats in the essence room then clicks a random rock (not the essence one) anyway to fix it?

joulaha
01-19-2013, 11:40 AM
when it goes to mine it clicks that little bush like thing thats in the essence room then clicks a random rock (not the essence one) anyway to fix it?

Take a picture and point where it clicks?

worrorfight
01-19-2013, 12:57 PM
It gets stuck when you just teleport and after you get a full inventory it does nothing afterwards

Shad
01-19-2013, 01:19 PM
For me, it fails, when going back.

joulaha
01-19-2013, 01:42 PM
Just fixed all errors for one person.

Fixlist is small, and easy to fix.

worrorfight
01-19-2013, 02:03 PM
Just fixed all errors for one person.

Fixlist is small, and easy to fix.

Did you fix the errors i said bud?

joulaha
01-19-2013, 02:09 PM
Did you fix the errors i said bud?

Try the Version2.

edit:
Pure or normal rune essence?

worrorfight
01-19-2013, 02:13 PM
Try the Version2.

edit:
Pure or normal rune essence?

I did tryed it but it did this when it was running to the (Rune essense) not pure and it done this to me 5 times now
http://postimage.org/image/qu7gdyse3/

Hexless
01-19-2013, 03:09 PM
18728
thats where the bot now clicks (i used AwesomeRuneEssence2)

hudson791
01-19-2013, 07:48 PM
i cant get my scropt to run at all, im new to simba so yeah

blakeryanfarris
01-20-2013, 05:56 AM
For me, it fails, when going back.

me too it leads me to the woods

Doob
01-20-2013, 06:55 AM
How do I use it I am a noob

Declan
01-20-2013, 04:51 PM
Unable to find file 'srl/srl.simba' used from 'C:\Simba\Scripts\AwesomeRuneEssence2.simba'

hi i am a noob at this stuff :D
i saved the script into simba > scripts
drag crosshairs from simba to client and i get a red frame so i knew something was up , the above sentence appears , sorry this is probably an easy fix but reply quick if you can!

kralkius
01-20-2013, 04:58 PM
here ya go
http://villavu.com/forum/showthread.php?t=47714

Declan
01-20-2013, 05:14 PM
i was missing that much information and steps? wow dude crazy!
thanks so much! +1 for this guy :)

NickCristea
01-20-2013, 05:32 PM
When I open the script in Simba and hit play it just randomly moves my mouse. I'm new to Simba, please help!

Synyster
01-20-2013, 08:14 PM
Sorry I'm new to this. =P How do I run the script in Simba?

John
01-20-2013, 09:11 PM
Sorry I'm new to this. =P How do I run the script in Simba?
Install Simba, Go to the front page and follow the guide called setting up Simba & SRL.

@OP I really think you should attempt a custom map, SPS may or may not work with the minimap being slightly different. But it's best to give it a shot.

Synyster
01-20-2013, 11:23 PM
Install Simba, Go to the front page and follow the guide called setting up Simba & SRL.

@OP I really think you should attempt a custom map, SPS may or may not work with the minimap being slightly different. But it's best to give it a shot.

I did. How do I run the script? =P

iautoi
01-21-2013, 06:14 AM
Both of your scripts need serious work, essence 1 freezes right when its about to click the ess to mine.

Essence 2 clicks some random rocks near the essence.. Very slow process after aubury tele to get to ess

Synyster
01-22-2013, 03:23 AM
Not a bad script just a bit slow and no failsafes when it misses the click to mine the essence.

And also, I noticed after you teleport out, it just continuously runs Northeast and doesn't go to bank.

joulaha
01-22-2013, 03:48 PM
Not a bad script just a bit slow and no failsafes when it misses the click to mine the essence.

And also, I noticed after you teleport out, it just continuously runs Northeast and doesn't go to bank.

Its trying to find bank!

Mikail
01-22-2013, 09:09 PM
If you have bug report do it correct form:
Bug: being stuck
Where**: In the Essense thing
Doing what**: It teles from aubury to the essense source then it goes to one path but stucks half way and doesnt reacts after that. Its almost at the essense mining station and gets stucks always just a little bit of it.

j3rr3
01-23-2013, 01:32 PM
pls help me? i can't start AwesomeRuneEssence.simba &
AwesomeRuneEssence2.simba ''error" would be nice if u make a example or something for it

"google translater"

j3rr3

joulaha
01-23-2013, 03:40 PM
If you have bug report do it correct form:
Bug: being stuck
Where**: In the Essense thing
Doing what**: It teles from aubury to the essense source then it goes to one path but stucks half way and doesnt reacts after that. Its almost at the essense mining station and gets stucks always just a little bit of it.

Alright, ill take a look at the route!

pls help me? i can't start AwesomeRuneEssence.simba &
AwesomeRuneEssence2.simba ''error" would be nice if u make a example or something for it

"google translater"

j3rr3

ivan123
01-23-2013, 04:21 PM
where i can get a client and what i must do its not work ;(

GuyWithLSD
01-23-2013, 09:48 PM
whell, all i can say that i cant run it on simba, simply, dont understand, i managed tu run normal rs window in simba, but i dont understand anything there..lie. what to press, where to press and so on..would be nice, if somone would creat a guide, how to run bots for RSPS with simba, not only for RS...

Toby1
01-23-2013, 09:50 PM
whell, all i can say that i cant run it on simba, simply, dont understand, i managed tu run normal rs window in simba, but i dont understand anything there..lie. what to press, where to press and so on..would be nice, if somone would creat a guide, how to run bots for RSPS with simba, not only for RS...

Drag crosshair to PRS06 client then start script (F9)

GuyWithLSD
01-23-2013, 10:04 PM
thanks so much! i managed to start the script!...but i dont work...stuck after teleports to mining area, walk near tree, and stop in middle road to ess mountain...and, just stand there..

opapoep
01-23-2013, 10:38 PM
thanks so much! i managed to start the script!...but i dont work...stuck after teleports to mining area, walk near tree, and stop in middle road to ess mountain...and, just stand there..

Same problem here

rj
01-23-2013, 10:44 PM
Same problem here

Hes using static coords.. his script is basically useless.

pooface
01-24-2013, 08:15 PM
This is my first time ever botting so i have no idea how to use this.. some help would be nice it wont even let me run the script at all...
http://img90.imageshack.us/img90/1581/botfuckup.png (http://imageshack.us/photo/my-images/90/botfuckup.png/)

Uploaded with ImageShack.us (http://imageshack.us)

pooface
01-24-2013, 08:19 PM
If you can't read what it says... , it says "Exexption in script: unable to find file "srol/sril.simba" used from "c:/users/ my name/ downloads/awsomeruneessence.simba.

Thtas what comes up in that little box... i am clicking choose client then dragging it to the pr06 downloaded client then clicking run. i've tyed re downloading and installing simba and the scribts still does the same, and i've already read the guide on how to run scripts.

Ukranium
01-26-2013, 04:35 PM
ugh what the hell, i downloaded simba and the bots wont work, how do i start botting, no bots are working for me.

Toby1
01-26-2013, 09:48 PM
If you can't read what it says... , it says "Exexption in script: unable to find file "srol/sril.simba" used from "c:/users/ my name/ downloads/awsomeruneessence.simba.

Thtas what comes up in that little box... i am clicking choose client then dragging it to the pr06 downloaded client then clicking run. i've tyed re downloading and installing simba and the scribts still does the same, and i've already read the guide on how to run scripts.

Go to View > Extensions

enable srl.sex with a tick, then close that window
go to SRL > check for update

then you have SRL and will be able to run the script:P.

John
01-27-2013, 02:17 AM
Just a note to all P06 users, Do not visit their site, It has been hacked by someone from bugabuse.

Synyster
01-27-2013, 08:48 AM
Just a note to all P06 users, Do not visit their site, It has been hacked by someone from bugabuse.

Simple DDoS, can't be stopped. And these shitheads say they can detect bots, LMFAO. I'd believe that if they actually coded something into the source. Just Vayken's leaked source with too many people. xD

Pew
01-27-2013, 06:18 PM
This was correct. The site was hacked and the webclient had a java drive-by attached. (Hence why you should download/use the .jar ;))

It's all fixed now but.

McDefault
01-27-2013, 08:03 PM
this is just rubbish its just standing after teleport.

John
01-28-2013, 12:30 AM
Simple DDoS, can't be stopped. And these shitheads say they can detect bots, LMFAO. I'd believe that if they actually coded something into the source. Just Vayken's leaked source with too many people. xD

It definently was not just a DDoS, They had taken down the normal index.php and replaced it with some images and txt.

verac2k11
01-28-2013, 06:00 PM
exception in script: Unable to find file 'srl/srl.simba' used from 'c:\documents and settings\--\my documents\downloads\awesomeruneessence2.simba'

wtf ?

xxbryanx7
01-28-2013, 07:24 PM
My mouse just went to the left and just clicked every so often. (went passed the varrock wall)

rswiz
01-28-2013, 10:50 PM
i get this error on startup??

New window: 262476
[Error] C:\Simba\Includes\SRL/SRL/core/globals.simba(696:5): Unknown identifier 'ImageSetClientArea' at line 695
Compiling failed.
A new update of Simba is available!
Current version is 980. Latest version is 992
[Error] (751:13): Unknown identifier 'GetColorToleranceSpeed' at line 750
Compiling failed.

joulaha
01-29-2013, 07:49 PM
I think im going to freeze this project for now, mods lock please.

I WILL continue after finishing AwesomeFisher!

sassy
01-30-2013, 06:35 AM
I dont understand, im new to botting, every time i start to run it or anything the mouse moves to a random spot, im guessing i dont have my window in the right place, where should the client be for it to work correctly?

Bestbotter
02-01-2013, 04:21 PM
Bug: Client dont show up.
Where?: @ running the script.
Doing what?: Wont run the script.

joulaha
02-01-2013, 10:52 PM
Bug: Client dont show up.
Where?: @ running the script.
Doing what?: Wont run the script.

What client?
Using webclient?

chaosdude52
02-02-2013, 03:24 AM
when it tries to go into the bank it cant find the bank symbol to click on due to the people standing on it is there any way to fix it

Mark1127
02-04-2013, 10:52 PM
Bug: Clicks into dummy room
Where: dummy room?
Whats it doing: Instead of going to aurbury it goes to the dummy room across the street

Drippy Spaff
02-05-2013, 01:20 AM
I don't really know what I'm doing in Simba, but I need help. Whenever I start the script it just moves my cursor upwards and clicks. It doesn't do anything in the game, just moves the cursor upwards. Can somebody tell me what I'm doing wrong?

rj
02-05-2013, 01:21 AM
I don't really know what I'm doing in Simba, but I need help. Whenever I start the script it just moves my cursor upwards and clicks. It doesn't do anything in the game, just moves the cursor upwards. Can somebody tell me what I'm doing wrong?

nothing. the script has bad minimap walking.

Wild Prod
02-05-2013, 11:29 PM
After i teleport from Aubury my character runs halfway to the essence and just stands there
-please fix

Jaydencc
02-06-2013, 12:20 PM
Dunno if I'm not doing something I should but it just moved my cursor up and clicks. I'm new to this, anyone help?

joulaha
02-07-2013, 01:22 PM
Will be fixing this soon as possible!

edit:

Started to remake this, everything will be new, nothing left of old!

So far goes to aubury, teleports, walks to rocks, checks inventory and get out!

Currently working on walking to bank and banking!

No more static coords !

joulaha
02-07-2013, 05:04 PM
Everything ready, just waiting the lag to be fixed so i can time everything correctly!
The lagg is tremondous!

voltag00
02-08-2013, 02:04 PM
when is this going to be done?

joulaha
02-08-2013, 02:09 PM
when is this going to be done?

Already done, uploading any minute now!

voltag00
02-08-2013, 02:45 PM
Sweet!! :) Where will the download be and what version will it be (so I know I'm downloading the right one!)

joulaha
02-08-2013, 02:48 PM
Sweet!! :) Where will the download be and what version will it be (so I know I'm downloading the right one!)

At first post!
I will be removing old version when i post it!

Currently running series of tests on it!

voltag00
02-08-2013, 02:57 PM
Okay thanks. I'll be waiting for the update.

voltag00
02-08-2013, 07:19 PM
Hey when will it be updated?

joulaha
02-08-2013, 07:58 PM
Im having some problems with it, hopefully out soon!

voltag00
02-09-2013, 05:50 AM
let me know when it's done! :)

Gh0stt
02-10-2013, 07:45 AM
Bug: Super high CPU usage?
Where?: Starts to spike bad right after you tele into the ess mine

Just thought I would add that.. Do you have any never ending loops or something else going flat out?

wistfullwiz
02-10-2013, 10:14 AM
I have downloaded the attetchment, first time botting <-- but its just a blank file what do i run it with?

joulaha
02-10-2013, 12:35 PM
Bug: Super high CPU usage?
Where?: Starts to spike bad right after you tele into the ess mine

Just thought I would add that.. Do you have any never ending loops or something else going flat out?

Dont worry releasing new version soon!

mr op
02-10-2013, 04:56 PM
Cant wait for the new version!

Gh0stt
02-11-2013, 12:15 AM
Will be fixing this soon as possible!

edit:

Started to remake this, everything will be new, nothing left of old!

So far goes to aubury, teleports, walks to rocks, checks inventory and get out!

Currently working on walking to bank and banking!

No more static coords !


Wow, sweet! How did you manage to make one without static co-ords?

Ah well, I guess we shall see when you release it! Really looking forward to seeing how you did it!
:D

Awkwardsaw
02-11-2013, 12:48 AM
Wow, sweet! How did you manage to make one without static co-ords?

Ah well, I guess we shall see when you release it! Really looking forward to seeing how you did it!
:D

SPS was recently added for P06. <3

voltag00
02-11-2013, 06:37 AM
Excited for the release! How much longer? :D