View Full Version : [SMART] RandFletcher - 1.6k bows/hr - 4 Random Clicking Methods - Antileach
OMGWTFISTHIS
03-05-2013, 07:30 PM
Before I leave where I am currently botting combat, does this support Pest Control bank? CBF walking all the way back if it doesn't.
Edit: I guess I could just take a look at the code and see for myself. lol
Before I leave where I am currently botting combat, does this support Pest Control bank? CBF walking all the way back if it doesn't.
No, I have the colour for it (was a bitch to find as most of PC's wall's are white), but I'm NOT including PC bank in the script.
OMGWTFISTHIS
03-05-2013, 07:34 PM
No, I have the colour for it (was a bitch to find as most of PC's wall's are white), but I'm NOT including PC bank in the script.
Wait, what about the walls? O.o I just click on top of the stall towards the top of the glass. Do you mind if I add it myself? :o
Wait, what about the walls? O.o I just click on top of the stall towards the top of the glass. Do you mind if I add it myself? :o
Add it for personal use, sure.
OMGWTFISTHIS
03-05-2013, 07:48 PM
Sweet, going to go try this out and give you some feedback. I lol'd at the antileech. You really have to be LOOKING.
Sweet, going to go try this out and give you some feedback. I lol'd at the antileech. You really have to be LOOKING.
That was the idea, I see too many antileaches which you can cancel out by deleting 1 line ;).
Kuriamas
03-05-2013, 07:55 PM
Before I leave where I am currently botting combat, does this support Pest Control bank? CBF walking all the way back if it doesn't.
Edit: I guess I could just take a look at the code and see for myself. lol
What bot/script you're using?
Sk1nyNerd
03-05-2013, 07:56 PM
Compiled successfully in 1373 ms.
Error: Out Of Range at line 158
sorta new here,havent incountered this problem yet. any hints?
Compiled successfully in 1373 ms.
Error: Out Of Range at line 158
sorta new here,havent incountered this problem yet. any hints?
You need to solve the antileach.
Sk1nyNerd
03-05-2013, 08:03 PM
You need to solve the antileach.
i did, the error occurs after your form pops up, i enter my user, pass, which bank and click start. after i click start that error occurs. is that part of your anti
i did, the error occurs after your form pops up, i enter my user, pass, which bank and click start. after i click start that error occurs. is that part of your anti
Might be, I made this script quite a while ago. I just recently added the antileach. It works perfectly fine when I remove antileach, so you must be missing one of them.
Kuriamas
03-05-2013, 08:08 PM
Leecher spotted. Solve it.
Sk1nyNerd
03-05-2013, 08:12 PM
Might be, I made this script quite a while ago. I just recently added the antileach. It works perfectly fine when I remove antileach, so you must be missing one of them.
ok, just checking because a forms a little more advanced lol. thanks
Jammycaliber
03-05-2013, 08:31 PM
Just sorted anti-leech, does it make short bows?
Just sorted anti-leech, does it make short bows?
No, only Longbows at the moment should have added that in initial post, will update at some point to do both, I'll have to add another combo box to the GUI and other shit.
Jammycaliber
03-05-2013, 08:42 PM
No, only Longbows at the moment should have added that in initial post, will update at some point to do both, I'll have to add another combo box to the GUI and other shit. remember to add what logs it goes up to aswell :)
remember to add what logs it goes up to aswell :)
It uses the first two bank spots to determine what it will click, doesn't detect logs in the bank.
Jammycaliber
03-05-2013, 09:09 PM
It uses the first two bank spots to determine what it will click, doesn't detect logs in the bank.
that makes sense (derp)
OMGWTFISTHIS
03-05-2013, 09:44 PM
Compiled successfully in 1373 ms.
Error: Out Of Range at line 158
sorta new here,havent incountered this problem yet. any hints?
I know this is an antileech, or at least it's supposed to be - but where the hell would I even start? I've googled various different forms of the procedure, and they are all shown exactly as what you have. I even copied their procedure for it, and it is still wrong, apparently. O.o
I've looked at every single DsgnForm function, nothing.
Edit: Think I fixed it, not sure. What a fail. xD
I know this is an antileech, or at least it's supposed to be - but where the hell would I even start? I've googled various different forms of the procedure, and they are all shown exactly as what you have. I even copied their procedure for it, and it is still wrong, apparently. O.o
I've looked at every single DsgnForm function, nothing.
Edit: Think I fixed it, not sure. What a fail. xD
Did you fix it, sir?
Omokest
03-05-2013, 10:32 PM
Did you fix it, sir?
Rand,
I am stuck on this Out of Bounds error. I solved all the other anti-leech with no issues. But, this one is throwing me for a loop (I'll probably face palm when I see finally fix it).
Based on the error, I assume it has something to do with accessing an index outside the bounds of an array. I've looked all through the script but can't seem to located where this could be happening. The only arrays seem to the bank array items for the combo box, and the ones setting up the form I compared the procedures of setting up the form to a script that I know works (which is also using smart and forms) and it is the same.
I am an experienced developer in quite a few languages, and trying to add SRL to my belt. I have the gist of the syntax, but I am missing some things.
I am not looking for the fix, but maybe a bit of direction in where to look. Any help would be greatly appreciated!
zyzz0r
03-05-2013, 10:40 PM
Nice script, try get shortbow support out ASAP!
Thanks.
Rand,
I am stuck on this Out of Bounds error. I solved all the other anti-leech with no issues. But, this one is throwing me for a loop (I'll probably face palm when I see finally fix it).
Based on the error, I assume it has something to do with accessing an index outside the bounds of an array. I've looked all through the script but can't seem to located where this could be happening. The only arrays seem to the bank array items for the combo box, and the ones setting up the form I compared the procedures of setting up the form to a script that I know works (which is also using smart and forms) and it is the same.
I am an experienced developer in quite a few languages, and trying to add SRL to my belt. I have the gist of the syntax, but I am missing some things.
I am not looking for the fix, but maybe a bit of direction in where to look. Any help would be greatly appreciated!
You are missing one of the antileaches I believe. I just downloaded this again and solved the antileaches to ensure the script worked, which it did.
Omokest
03-05-2013, 11:34 PM
You are missing one of the antileaches I believe. I just downloaded this again and solved the antileaches to ensure the script worked, which it did.
Face to the effing palm (I was looking for a syntax error, but completely overlook the logic of the script).. Great anti-leech! Finally fixed it after looking in all the wrong places haha.
Script is working pretty well at Catherby with Willows. I am baby sitting to ensure.
I did notice that if it doesn't finish an inventory (either leveling or a miss-click), it will put all the remaining logs back into the bank, and then takes out a full inventory. Might be something you want to address when you update with anti-ban. Since a human player wouldn't put back logs to take them back out.
It did bank my knife on two occasions (I am assuming due to random miss-clicks). Might want to add a check to ensure knife is in inventory, as it kept spam clicking the logs to use together and typing '27'
Also to address the 27 with some possible future anti-ban, you might want to add randomness to what it is sending when you are making X. I doubt many human players would always type 27 (I personally spam the number pad a bit to ensure I am making at least 27 every time I make 'X' for something).
Just some potential anti-ban / ideas. Thanks for the script, and that challenge in the anti-leech!
Face to the effing palm (I was looking for a syntax error, but completely overlook the logic of the script).. Great anti-leech! Finally fixed it after looking in all the wrong places haha.
Script is working pretty well at Catherby with Willows. I am baby sitting to ensure.
I did notice that if it doesn't finish an inventory (either leveling or a miss-click), it will put all the remaining logs back into the bank, and then takes out a full inventory. Might be something you want to address when you update with anti-ban. Since a human player wouldn't put back logs to take them back out.
It did bank my knife on two occasions (I am assuming due to random miss-clicks). Might want to add a check to ensure knife is in inventory, as it kept spam clicking the logs to use together and typing '27'
Also to address the 27 with some possible future anti-ban, you might want to add randomness to what it is sending when you are making X. I doubt many human players would always type 27 (I personally spam the number pad a bit to ensure I am making at least 27 every time I make 'X' for something).
Just some potential anti-ban / ideas. Thanks for the script, and that challenge in the anti-leech!
Great to see a user figured it out. It's quite hard to spot compared to others. The banking the knife issue is to do with the P07_Deposit in the unofficial P07Include, so I can either remove that and produce my own one (which I might do), or wait till the official release. The leveling up issue SHOULD be fixed soon, I'm adding pixelshift detection so that if it stops fletching it will attempt to retry. I personally always type 27 when fletching, but I might make it random and >27. The same issue with Make 'X', unofficial P07Include is messing up, may have to add my own personal method. Thanks for the feedback.
OMGWTFISTHIS
03-06-2013, 12:34 AM
Okay, I fixed that error - wow you certainly did only add a few. (;
Those were the most simple but hard anti-leeches, because you aren't expecting it. Anyways, onto the script.
This is redundant, but the script will type '27' outloud due to it not detecting whether or not the screen is up.
You can implement a fix for it, I believe from here (http://villavu.com/forum/showthread.php?t=97148&p=1179496#post1179496).
I have no clue how to do that, as my scripting ability is next to nothing. :|
PersonMan
03-06-2013, 02:10 AM
At varrock east it runs outside a lot when doing oak longbows. It needs to check whether there's still longbows in the inventory rather than blindly repeating.
Shorteh96
03-06-2013, 08:49 AM
Is this part of the anti-leech because I've never seen an error like this before:
Exception in Script: Unknown compiler directives at 4:3
zyzz0r
03-06-2013, 12:58 PM
that's the first part, there is thousands after that :P
I'm stuck at line 158 being out of range :( any help?
orly22
03-06-2013, 02:17 PM
any plans on releasing a script that will attach a bowstring to unstrung longbows? great script btw
any plans on releasing a script that will attach a bowstring to unstrung longbows? great script btw
Already made it, not releasing yet as I want to try and preserve the prices of logs/bows/bowstrings/flax as this market is currently strong.
Is this part of the anti-leech because I've never seen an error like this before:
Exception in Script: Unknown compiler directives at 4:3
Yes sir, that is the antileach.
Shortbow support just added. Changed download to v1.1.2. Enjoy!
Omokest
03-06-2013, 03:15 PM
Rand,
Noticed it will run over to the cooking building in Catherby, and click around. Doesn't happen too often, but has happened twice since I've been watching the script.
I also noticed it will get stuck some times clicking the far left potion of the bank. It gets stuck until I reload the script.
Some of these errors may be a P07_include issue, but just bringing to your attention.
Your failsafe goes on overload if you get sent into a random, and will just keep trying to bank stuff when it cannot. This can start eating up memory.
When stopping the code this happens (not a big deal, just more heads up):
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4, 5]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap]
Lastly, I added some anti-ban of my own. It hovers the fletching skill, moves camera randomly, and sends random values for make X. I am very certain you know how to do all these yourself, but if you want to save a bit of time I can send my version in a PM.
Rand,
Noticed it will run over to the cooking building in Catherby, and click around. Doesn't happen too often, but has happened twice since I've been watching the script.
I also noticed it will get stuck some times clicking the far left potion of the bank. It gets stuck until I reload the script.
Some of these errors may be a P07_include issue, but just bringing to your attention.
Your failsafe goes on overload if you get sent into a random, and will just keep trying to bank stuff when it cannot. This can start eating up memory.
When stopping the code this happens (not a big deal, just more heads up):
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3, 4, 5]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap]
Lastly, I added some anti-ban of my own. It hovers the fletching skill, moves camera randomly, and sends random values for make X. I am very certain you know how to do all these yourself, but if you want to save a bit of time I can send my version in a PM.
- Missclicking at the top left of bank is when bank isn't loading up at the top (I.E you need to take out an item in the top row before running the script).
- Catherby, I may have to change colours but it shouldn't move the screen so it shouldn't detect the stove.
- Antiban. I will add hover over skill, random type, move mouse randomly, but I will not include move screen as the colours change and it may detect a different object of the same colour (I.E catherby stove).
- Randoms. Nothing can be done until official anti-randoms get input, I don't want to have to code a logout script for every single random.
Omokest
03-06-2013, 03:51 PM
- Missclicking at the top left of bank is when bank isn't loading up at the top (I.E you need to take out an item in the top row before running the script).
- Catherby, I may have to change colours but it shouldn't move the screen so it shouldn't detect the stove.
- Antiban. I will add hover over skill, random type, move mouse randomly, but I will not include move screen as the colours change and it may detect a different object of the same colour (I.E catherby stove).
- Randoms. Nothing can be done until official anti-randoms get input, I don't want to have to code a logout script for every single random.
Ah, that makes since on the moving camera. I won't be adding that in now.
I just fixed up the new version you uploaded (another great batch of anti-leech!). Short bows working great, and just in time for when I needed the update! I will be baby sitting while I work today, so I will update any more bugs.
Thanks for the script!
Ainaras
03-06-2013, 04:04 PM
Can some one help me with the anti leach? Im new to simba and i wish to learn more.Can some one say from where i should start? Watch some simba scripting tutorials or what? Can some one just show me from where i should start?
Ah, that makes since on the moving camera. I won't be adding that in now.
I just fixed up the new version you uploaded (another great batch of anti-leech!). Short bows working great, and just in time for when I needed the update! I will be baby sitting while I work today, so I will update any more bugs.
Thanks for the script!
Shortbows should be fine :). Antileach is a bit easier this time, but still not easy! Good luck fletching.
Can some one help me with the anti leach? Im new to simba and i wish to learn more.Can some one say from where i should start? Watch some simba scripting tutorials or what? Can some one just show me from where i should start?
Try the tutorials/guide section for simba, and read that to see whether that would help.
Shorteh96
03-06-2013, 04:50 PM
Well if that is the anti-leech, I guess I just won't get to use the script as I have no idea how to solve that error :|
zyzz0r
03-06-2013, 05:15 PM
Anyone else having a problem where when it goes to fletch the logs it won't type in 27 or whatever amount. Have I messed up the anti-leech? (In catherby bank)
Anyone else having a problem where when it goes to fletch the logs it won't type in 27 or whatever amount. Have I messed up the anti-leech? (In catherby bank)
I used TypeSendEx, which works fine with SMART.
OMGWTFISTHIS
03-06-2013, 05:33 PM
In regards to the knife issue as stated above. You can, instead of terminating the script if it can't find the knife, you can make it withdraw one. You'd have to have more than one knife in your bank, right next to your logs. Just making suggestions to solve it. :p
LKOD Jake
03-06-2013, 05:50 PM
Is this part of the anti-leech because I've never seen an error like this before:
Exception in Script: Unknown compiler directives at 4:3
I wonder if it has something to do with the includes?
There is your hint... good luck
edit: Gah can't believe i missed the anti-leech in the begin method... Very clever lol.. anyways might add in something for level up messages and pm it to you if you want
zyzz0r
03-06-2013, 06:02 PM
I used TypeSendEx, which works fine with SMART.
It's getting stuck, it doesn't get to the X. It then thinks it's fletched them a minute later and banks the willows.
OMGWTFISTHIS
03-06-2013, 06:04 PM
It's getting stuck, it doesn't get to the X. It then thinks it's fletched them a minute later and banks the willows.
Try making the wait random range just before that line, let's say...a second longer in both slots.
Hi guys! Like most others, this is my first time doing this sort of thing, however I do believe I've found a few anti-leeches but I seem to have stumbled upon this little gem of a problem:
(1).simba(7:8): is ('=') expected at line 6.
Just wondering whether anybody could throw me a bone as to how I would go about sorting this, thanks :)!
zyzz0r
03-06-2013, 06:24 PM
Try making the wait random range just before that line, let's say...a second longer in both slots.
I tried but I really don't know what I'm doing there :( can anyone help me?
OMGWTFISTHIS
03-06-2013, 06:37 PM
Being as typing a random number repeatably would be the ultimate sign of botting, I changed it up a bit - to withdraw 10, until the inventory is full.
To withdraw it, I put:
MMouse(94,80, 5, 5);
wait(randomrange(50,100));
Clickmouse2(mouse_right);
wait(randomrange(400,700));
P07_chooseOptionMulti(['10']);
wait(randomrange(800,1200));
until (P07_InvCount = 28);
Maybe you can implement it that way, instead of counting on if/thens for the time being. Sure, it's a very noobie way of going about it, but it for sure can't fail you. :p
zyzz0r
03-06-2013, 07:38 PM
So I got it working on my laptop with the exact same code, a little inconvenient but it'll do. Still a bit confused why it refuses to work on my computer though; if anyone wants to help me... feel free! :)
So I got it working on my laptop with the exact same code, a little inconvenient but it'll do. Still a bit confused why it refuses to work on my computer though; if anyone wants to help me... feel free! :)
sounds like a weird problem, maybe try reinstalling the simba on your comp?
- p.s. RIP ZYZZ FOREVER MIRIN'
Y L L A S
03-06-2013, 07:59 PM
Keep getting "Error: Out Of Range at line 158". I've solved a few of the anti-leeches but I'm new to this and unsure as to whether this error is an anti-leech or not? Could you please clarify?
Thanks in advance
Keep getting "Error: Out Of Range at line 158". I've solved a few of the anti-leeches but I'm new to this and unsure as to whether this error is an anti-leech or not? Could you please clarify?
Thanks in advance
That is another antileach, sir. Good luck.
10gez10
03-06-2013, 08:40 PM
Exception in Script: Unknown compiler directives at 4:3
I keep getting this compiler error, any reasons why?
Exception in Script: Unknown compiler directives at 4:3
I keep getting this compiler error, any reasons why?
That is apart of the antileach, sir. Good luck!
10gez10
03-06-2013, 08:48 PM
That is apart of the antileach, sir. Good luck! meaning what exactly?
I got this
03-06-2013, 08:49 PM
meaning what exactly?
Meaning he intentionally messed up the script so that in order for people to use it you would have to learn the most basic knowledge of scripting that takes 30 mins max to learn.
10gez10
03-06-2013, 09:37 PM
Meaning he intentionally messed up the script so that in order for people to use it you would have to learn the most basic knowledge of scripting that takes 30 mins max to learn.
got rid of few things though do i need to move around the code, tried bringing up couple of sections to top but no luck, managed to cyther few ones before i did this one and its hard :/. the comments aren't completely useful. personally i hate pascal / style of things but it will do.
Demolish
03-06-2013, 09:40 PM
[Hint] C:\Simba\Scripts\RandFletcherv1.1.2.simba(207:10): Variable 'Result' never used at line 206
[Error] C:\Simba\Scripts\RandFletcherv1.1.2.simba(253:25): comma (',') expected at line 252
Compiling failed.
Is this a result of anti-leach or me screwing up?
10gez10
03-06-2013, 09:44 PM
you need to add and ; to end; for example
Shorteh96
03-06-2013, 10:35 PM
What do I do about this, when I go to compile the script it opens a new tab with SRL.simba in it and reports this error
[Error] C:\SMART Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
What do I do about this, when I go to compile the script it opens a new tab with SRL.simba in it and reports this error
[Error] C:\SMART Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
I broke a specific line in my script for that error to occur, scan the script and you'll find it.
Shorteh96
03-06-2013, 11:11 PM
I broke a specific line in my script for that error to occur, scan the script and you'll find it.
Well, Id assume that since it is an anti-leech. I just don't understand what causes it to open another script. I've gone through and fixed every last al except this one.
OMGWTFISTHIS
03-06-2013, 11:44 PM
Well, Id assume that since it is an anti-leech. I just don't understand what causes it to open another script. I've gone through and fixed every last al except this one.
That's not a script, it's what you imported - don't worry about it opening a new tab/'script'.
jaypwns
03-06-2013, 11:47 PM
Exception in Script: Unknown compiler directives at 4:3
not sure if this is a anti leech or what
OMGWTFISTHIS
03-06-2013, 11:50 PM
Exception in Script: Unknown compiler directives at 4:3
not sure if this is a anti leech or what
That is an anti leech, yes.
jaypwns
03-07-2013, 12:07 AM
That is an anti leech, yes.
figured that one out
[Error] C:\Simba\Includes\SRL/SRL.simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
this one though...
OMGWTFISTHIS
03-07-2013, 12:17 AM
figured that one out
[Error] C:\Simba\Includes\SRL/SRL.simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
this one though...
Type that error into google including 'villavu' and see what you get. Or compare it to other scripts. That's all I'm saying.
jaypwns
03-07-2013, 12:47 AM
Type that error into google including 'villavu' and see what you get. Or compare it to other scripts. That's all I'm saying.
i've tried i clearly don't have much of an idea what to look for unless i'm making it more complicated than it should.
Real good anti leech, but i've spent like 30 mins trying now.
i've added begin tags and that gives me an identifier error
http://villavu.com/forum/showthread.php?t=6413&highlight=expected+line+compiling+failed
i've been through this thread
All I wanna do is get that there 70 fletch
i've tried i clearly don't have much of an idea what to look for unless i'm making it more complicated than it should.
Real good anti leech, but i've spent like 30 mins trying now.
i've added begin tags and that gives me an identifier error
http://villavu.com/forum/showthread.php?t=6413&highlight=expected+line+compiling+failed
i've been through this thread
All I wanna do is get that there 70 fletch
This script shouldn't even have Anti-Leech. I probably shouldn't post this, but clearly this script isn't stable
That still has anti-leech in it :)
I don't understand his code therfor cannot go any further - theres no point, removing procedures just confuses the user
OMGWTFISTHIS
03-07-2013, 02:23 AM
Not that you care, but it's in the main loop.
stevarius
03-07-2013, 02:39 AM
The script isn't clicking X and I don't think this is part of the anti-leech. What the hell?
Even tried a suggested solution earlier.
This script shouldn't even have Anti-Leech. I probably shouldn't post this, but clearly this script isn't stable
You are clearly not allowed to do this. Reported it. "isn't stable", yet managed to achieve 95+ fletching with it.
wolffang92
03-07-2013, 04:52 PM
Wow, great job on the anti-leach, that was actually really hard to figure out, took me a good 30 minutes. Definitely the hardest anti-leach I've seen on this site. The script is running great, the only problem is that it switches bank booths after every inventory instead of sticking to just one, which just looks really bad to other players... but other than that, it's awesome. (I'm using draynor bank by the way.)
You are clearly not allowed to do this. Reported it. "isn't stable", yet managed to achieve 95+ fletching with it.
SRL Rules & Regulations
Foreword
The staff reserve the right to interpret these rules any way they see fit. Staff may lock or remove topics and posts at their own discretion. They may also issue infractions to users as they see necessary for maintaining a positive community. Any disagreement with a staff member's decision is to be resolved through the use of the PM system. Any public disputes are to be avoided and are infractable at the staff’s discretion. You have no rights and are entitled to nothing.
No Leeching
SRL is for the beginner and the advanced, for the hobbyist and the semi-professional. We are an open and free community that believes in cooperative learning and sharing. This is only possible when we all participate together and do not leech. We encourage all our users to get involved and participate in our community. This does not necessarily mean that you have to be an amazing scripter. There are many other ways that you can still contribute to the community. A zero or spam filled post count and a hard drive stacked with good scripts is not an option here. The SRL Community has worked thousands of hours on this project and we are giving SRL out for free. All we ask in return is that you stay awhile and participate in our community.
Behave
Although the main focus of SRL is for scripting, we also like to have fun and debate over the “Real Questions of Life”. You are free to talk about any other subject; however it must be within moral standards. Always remember that you should debate the topic, not the person. Speaking directly to the adolescent majority: don't do anything your parents wouldn’t want you to do here! Failing to stay within morality will lead to infractions or bans. In short, just behave!
Bannable Offenses
The SRL Staff retains the right to ban any user at any time for any reason and without question. However, you will be automatically permanently banned specifically for the following offences:
Unauthorized Distribution of Scripts:
Do not post any scripts that you have not written yourself on any forum unless given permission from the original author; this includes edited or modified scripts. Doing so is theft of intellectual property and will not be tolerated here.
Offensive Material:
This consists of posting or linking to adult, child, and or anime pornography or any other unethical, inappropriate or offensive material. In the event of illegal content is posted, such as child pornography, the appropriate law enforcement agencies WILL be informed immediately.
Spam Advertisements:
Any advertising bots will be banned on the spot and if spam advertising does occur, the internet service provider of the associated IP address will be contacted.
Illegal Torrents / Warez:
The posting of or linking to warez, illegal torrents, cracks, keygens, serials, authentication bypass guides or any other illegal copyrighted material is at no time permitted on the forums. This obviously does not include legal torrents such as the ones provided by Canonical for the Ubuntu distro.
Key Logging / Password Theft / Phishing:
Any topic related to key logging, password cracking, or helping others create, use, or distribute password cracks or key loggers is strictly prohibited. Any party involved in such topics will be immediately reported to their internet service provider.
Infected Files:
Posting, linking to, or distributing viruses, trojans, worms, malware and any other malicious pieces of software, in any form, is not tolerated. This also includes topics on the creation and or distribution of the aforementioned items. Any parties involved in such activities will be reported to their internet service provider.
Impersonation:
Pretending to be an Administrator, Moderator, Developer, or any other user or rank for any reason at any time is unacceptable.
Returning After a Ban:
You may not return after a permanent ban.
Infractable Offenses
The SRL Staff retains the right to issue and infraction or warning to any user at any time for any reason and without question. You will receive and infraction for the following offenses:
Buying and Selling:
Buying or selling of any scripts, services, real world goods, or virtual goods outside of the black market is prohibited. Please visit one of our friendly neighboring communities for anything related to real world money or Runescape related gold.
Plagiarism:
This involves posting someone else's work claiming that it is your own creation; this includes modified versions of the original work. Doing so will result in an infraction and suspension on the first offence and a permanent ban if it happens again. Copying and or modifying functions or procedures is only allowed if you credit the original author properly. For examples on how to credit properly, please refer to the SRL library or ask an SRL Member.
Returning During a Suspension:
You may not return to SRL while you are serving a suspension. If you do so, the time your account has been suspended for will be increased and any additional accounts created will be banned. If you continue to make additional accounts to try to get around a suspension, you will be permanently banned from the forums.
Multiple Accounts:
Users are permitted to have one account and one account only. Any additional accounts made will be immediately banned. Depending on the circumstances, further action may be taken as decided at the staff’s discretion.
Leaking:
Any users caught leaking information or scripts from their respective sections will be immediately de-ranked. The user will be given an opportunity to defend themselves and dispute the allegations.
Spam:
Please avoid spamming the forum with useless posts. At SRL, we value reputation above post count. If your post does not contribute positively to the ongoing topic, then please refrain from posting it as it is most likely spam. Repeating the same question in multiple sections without waiting for an answer is also spam.
Misbehavior:
We expect all of our users to act respectfully of each other and the staff. Showing a nasty attitude will earn you an infraction in no time. Behave, don’t stir up trouble, and don’t poke the fire. Help out others, life is already difficult enough.
Insulting Other Members:
We want our community to remain as friendly and enjoyable as possible. Insulting, flaming, belittling, degrading, personally attacking, and discriminating against other users will not be tolerated. If you continue and make a habit of doing so after being warned, further action may be taken at the discretion of the staff.
Backseat Moderating:
If you see something that breaks the rules, please report the post by pressing the little red square with an ‘x’ on the right hand side of a post. Please do not chastise or reprimand other users. We have able and competent staff who will handle the situation accordingly.
Bumping and Grave Digging:
Bumping is unnecessary and unneeded. People will reply in time, so please be patient. Grave Digging is when you reply to a topic that has been inactive for over 3 months and the conversation is obviously dead.
"Clicks For Cash" Ads and Referrals:
Both are unwelcome here! Posting threads for Clicks For Cash websites will result in 10 day suspension. You will receive and infraction for any referral links in your signature.
Posting Under the Influence:
It is not allowed to post in any section outside the off-topic category when intoxicated or under severe influence of drugs.
Malicious Intent:
Posting of any information or directions with a malicious intent is expressly forbidden. If you do so, appropriate action will be taken against you as seen by the staff. An example of malicious intention would be to tell a user to delete his System32 folder to fix an error.
Inappropriate language:
Inappropriate language, including swearing or cussing, of any kind is prohibited, except in and only in the BBQ Pit section. Directly swearing or cussing at another member, or insulting another member is prohibited on ALL boards. If this rule is broken, we, the staff, have the right to issue an infraction at our discretion.
All Caps and Multi-Posting:
Please do not post with caps lock on, it is very annoying to read and looks messy. Also, if you have something to add to a post, use the edit button rather than making an additional post right after your own post. The edit button is located in the bottom left corner of your post.
Three infractions will result in a suspension.
Six infractions will result in a permanent ban.
SRL Source Code
The SRL-Library is free of charge and distributed under the GPL v3 license. All SRL Code may be edited, modified and copied as long as you credit properly and include the full source code. This means that you must refer to the original author of the material in the header of your Script and Function.
The above does not apply to any script other than MSI. The copyrights of an individually made script are held by the script author. You MUST get permission from the original script author to publicly edit, modify or post their scripts. Failure to do so is against SRL rules and you will be reprimanded accordingly at the staff’s discretion.
Script Restrictions
Scripts posted on the SRL forums must not contain any obfuscated code or be of a malicious nature in any way. If caught posting a password stealing script, you will be immediately banned.
Applying for SRL Membership
In order to become SRL-Member, you will need to apply with a well written Simba script that demonstrates your competency with the SRL Library. The application form will create a polled thread allowing SRL Members to judge your abilities and vote yes or no on your application. You may only submit one application per month (4 Weeks) unless otherwise stated by a staff member. If you apply with a script that is not your own, your application will be immediately closed. You will then be punished as outlined under “Plagiarism” in the “Infractable Offences” section.
For more information on what voters will be looking for, please read this thread:
How to become an SRL Member.
Reputation
Reputation points at SRL are only used to show appreciation towards other members. They will not get you any extra privileges. Please do not abuse the reputation system as it is only meant as a bit of fun. If the reputation system is abused, it will be disabled.
Meme Policy
If you post a meme you are responsible for any content depicted in the meme (ie: inappropriate language, racism, etc). If the meme breaks any of our rules, you will be infracted for it. If your post solely contains a meme and contributes nothing to the ongoing conversation, it will be regarded as spam and will appropriate actions will be taken. Please try to keep the memes on 4chan and reddit, that is where they belong.
Avatars
The Avatars are reserved for Donators, SRL Member rank and above. There are no Avatars available for Registered Users or Junior SRL Members. Keeps avatars appropriate and do not use the SRL Ranks as Avatars. Failure to do so will result in an infraction.
Signatures
Signatures must not contain inappropriate or offensive content and must be kept in proportion with the body of your average message (3 -5 lines max). The staff reserves the right to remove or modify and content a user’s signature at any time.
Additional Resources
Terms of Service | Privacy Policy | Forum Ranks
Enjoy!
- SRL Management
Nothing in the rules says inthing about that but I will remove it anyway.
Highly doubt you achieved 95 fletching with this.
fluffycluffy
03-08-2013, 04:27 AM
"
Exception in Script: Unknown compiler directives at 4:3
Exception in Script: Unknown compiler directives at 4:3
Exception in Script: Unknown compiler directives at 4:3
Exception in Script: Unknown compiler directives at 4:3"
any ideas?
phury
03-08-2013, 05:43 AM
Stable and very nice script, been running for 6 hours! Obviously had to solve a few anti-randoms, but all is working fine and dandy! :D
10gez10
03-08-2013, 05:49 AM
figured that one out
[Error] C:\Simba\Includes\SRL/SRL.simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
this one though...
in function section its expecting you to add a "begin" function within line 7 to code for to be executed and finished with end;
Habooji
03-08-2013, 05:50 AM
I've solved all the errors, but I get this when I run it
[Hint] C:\Users\Lekko\Downloads\RandFletcherv1.1.2(2).sim ba(207:10): Variable 'Result' never used at line 206
What am I missing?
10gez10
03-08-2013, 05:57 AM
I've solved all the errors, but I get this when I run it
What am I missing?
seems the author scripted it to display something though if it compile fine you can do without it. It's saying the result variable has nothing to display because it wasn't used in the first place for that line or small section of code. Try removing result from that line and see if it compiles
Habooji
03-08-2013, 06:03 AM
The script doesn't run, that is to say it doesn't do anything. Smart starts up, but it never logs in, and then the script finishes. And when i try to run it through chrome instead it just finishes.
10gez10
03-08-2013, 06:03 AM
To Rand,
Personally i would like to say nicely done on your script, for most of users here it works so it seems. Personally for myself who knows the languages html, visual basic, java, javascript, pascal and c++, i'm still having few issues trying to work out or 'scyther' the anti leeches in your script(this anti leech business it personally bizarre but understandable). If you could add few more comments to potential point out hints or some from of 'help' addition to this it would be greatly appreciated for community including myself.
Once again many thanks for script and keep up with good work.
10gez10
03-08-2013, 06:41 AM
procedure RandFletcher;
{$DEFINE SMART}
{$include SLR/SLR.Simba}
{$include SLR/SLR/Misc/Debug.Simba}
{$include P07Include.Simbo}
Exception in Script: Unable to find file 'SLR/SLR.Simba' used from 'C:\Users\Alexander\Desktop\RandFletcherv1.1.2.sim ba'
Can someone please explain why i can't find the directory for this. I have Extensions, Parsar, Paster, SRL, SPS and MSI all enabled and updated.
Many thanks
Habooji
03-08-2013, 06:52 AM
*cough* antileech *cough*
Been trying to fix this part of the anti leech for about 2 hours. Have the same problem as Habooji -
[Hint] C:\Users\Kiba\Desktop\RandFletcherv1.1.2.simba(208 :10): Variable 'Result' never used at line 207
this is line 207
function chooseBank: boolean;
this problem seems to replicate on another script that should be working
any tips on debugging or hints if this is somehow part of an anti-leech?
10gez10
03-08-2013, 04:24 PM
procedure ShowFormModal;
begin
DsgnForm:ShowModal;
end;
After hour of looking back and forth i figured why it won't compile in the end. I've come to a grinding point whether i need to add to this or is it a actually error or not?
Tomorrow or later tonight (depending what time I finish work), I will be looking at suggestions and perhaps inputting these, firstly (still later, after work) I will adding a 'hint' section for the antileach on the main post, I added such hard antileach as I wanted to finish getting to 99 fletch personally before full release. I've changed the P07_ChooseOption(['X']) to my own option so it will no longer missclick, release will be tomorrow or later!
Nothing in the rules says inthing about that but I will remove it anyway.
Highly doubt you achieved 95 fletching with this.
I got 97, and there is a rule about this:
Unauthorized Distribution of Scripts:
Do not post any scripts that you have not written yourself on any forum unless given permission from the original author; this includes edited or modified scripts. Doing so is theft of intellectual property and will not be tolerated here.
I got this
03-08-2013, 11:14 PM
Welcome to RandFletcher.
Get them stats high, whilst you're high!
LOL this made my day just that much better.
Edit: On a side note I saw you said you were looking for suggestions to improve it, how about supporting stringing of bows?
LOL this made my day just that much better.
Edit: On a side note I saw you said you were looking for suggestions to improve it, how about supporting stringing of bows?
Already made a RandStringer, not releasing yet until I've personally finished using it, otherwise the prices will crash.
Already made a RandStringer, not releasing yet until I've personally finished using it, otherwise the prices will crash.
No... that won't crash the prices..
No... that won't crash the prices..
You'd be suprised how many people will fully string bows and dump them as fast as possible.
You'd be suprised how many people will fully string bows and dump them as fast as possible.
You assume that most people are going to be using your script.. which isn't true theres way more bots out now.
This would be different if it was day 1-2 of old school
You assume that most people are going to be using your script.. which isn't true theres way more bots out now.
This would be different if it was day 1-2 of old school
True, but I haven't seen one implement stringing yet, so I'll release it when I see another being released.
AKOPPER
03-10-2013, 02:54 PM
I'm new to this forums and I keep getting the error "Exception in Script: Unknown compiler directives at 4:3" When I'm trying to run the script, I've got SMART 8.0 and all that new stuff. I'm pretty sure I've got RID of all the anti-leeches.
I'm new to this forums and I keep getting the error "Exception in Script: Unknown compiler directives at 4:3" When I'm trying to run the script, I've got SMART 8.0 and all that new stuff. I'm pretty sure I've got RID of all the anti-leeches.
You haven't removed the easiest anti-leach. Good luck sir! Here is a hint: it is in the top 50 lines!
dwacz
03-10-2013, 07:58 PM
can someone give me a hint... im newbie with this and dont know what im looking for to change in this script... so pls can someone tell me :(
tacooes
03-11-2013, 03:25 AM
Hey all, i've been trying to fix this cursed antileach for about 3 hours now.
I fixed all the silly ones.
BUT THIS ONE
[Error] C:\Users\Jaime\Downloads\RandFletcherv1.1.2.simba( 9:1): Unknown identifier 'DsgnForm' at line 8
i can't crack it, can anyone help me?
duke4eva
03-11-2013, 03:48 AM
After getting the compiler directories fixed why do i get this error with SRL?
[Error] C:\Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
toddlerflesh
03-11-2013, 05:19 AM
After getting the compiler directories fixed why do i get this error with SRL?
[Error] C:\Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
I'm pretty sure I fixed all the leeches, but I'm getting the same error as this fellow.
skalman555
03-11-2013, 03:43 PM
I'm pretty sure I fixed all the leeches, but I'm getting the same error as this fellow.
You didn't solve all of them if you get that error. I just spent a good 30minutes solving this puzzle, and at one point I had the same error as you, but now it finally works.
Released RandStringer as well!
that sir ^ is part of the anit-leech :)
lookaway
03-12-2013, 01:51 AM
Sigh. Haven't had an unsolved anti-leech until now.
[Error] C:\Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
EDIT: I'm stupid. So obvious now.
Sigh. Haven't had an unsolved anti-leech until now.
EDIT: I'm stupid. So obvious now.
Congratz, enjoy the script.
larry0001
03-12-2013, 10:18 AM
Hey man,
I finally got the script working :p, just had to edit some of the delays due to some lag.
Every so often, instead of banking the script will make my character run out of the bank? (this is when it's meant to be banking)
I don't know if this is a common issue so I'll just post this here!
Hey man,
I finally got the script working :p, just had to edit some of the delays due to some lag.
Every so often, instead of banking the script will make my character run out of the bank? (this is when it's meant to be banking)
I don't know if this is a common issue so I'll just post this here!
This happened once when I was lagging before, it does check the bank is open.
koekhapper66
03-12-2013, 01:14 PM
Let's make antileech hard:
* so only experienced srl forum readers understand the script that doesnt influence the economy at all.
* so no noob will be able to fix the leech within a hour withouth spamming on the topic asking about the antileech (bumping the thread for free).
* so nobody will join the community and everybody will wait for normal bots to come.
said no smartass ever.
koekhapper66
03-12-2013, 01:18 PM
oh nvm u got one witouth anti leech aswell, respect.
mattyayeit
03-12-2013, 04:21 PM
ANTI LEECH has to come off now anyway due to cohen saying so as anti leech is agaisnt rules
bam92992
03-12-2013, 04:34 PM
Let's make antileech hard:
* so only experienced srl forum readers understand the script that doesnt influence the economy at all.
* so no noob will be able to fix the leech within a hour withouth spamming on the topic asking about the antileech (bumping the thread for free).
* so nobody will join the community and everybody will wait for normal bots to come.
said no smartass ever.
if someone has scripted max one or two scripts they should be able to fix it. just take it one error at a time. this forum is based on learning more so than just botting.
tried it out for a bit and sometimes it would misclick and continue as if it actually clicked. it would type "27" in the chatbox and send it, making it look pretty bot-like.
yankees
03-12-2013, 06:08 PM
Coh3n saying anti-leech is forbidden? damn better remove it then
relaxationjp
03-12-2013, 07:58 PM
Just can't figure out the "do not SetupP07Include" I don't know pascal so idk the syntax for "not" doing something.
As a whole seems poorly written.
Quad Core
03-12-2013, 09:35 PM
C:\Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7 ...
i added begin to line 7 and still not working..
relaxationjp
03-12-2013, 11:02 PM
I took off the anti-leech, but the problem is it's a little poorly written (no offence and due to the extensiveness of the anti-leech combined with the odd / poorly written scripting, it's hard to tell what you intend for the user to "fix". That said I pretty much had to re-write it and made a new functional GUI etc..
I took off the anti-leech, but the problem is it's a little poorly written (no offence and due to the extensiveness of the anti-leech combined with the odd / poorly written scripting, it's hard to tell what you intend for the user to "fix". That said I pretty much had to re-write it and made a new functional GUI etc..
GUI works, I just added simple antileach but in random places (that's why its hard to find), as for the way the script is written when I first intentionally started the script I made it as simple as possible but I added random code here and there (which made it scruff). I added this code for the GUI and FailSafes, if you remove those the code is very easy to read.
Mouring
03-13-2013, 02:26 AM
Exception in Script: Unknown compiler directives at 4:3 what does that mean... i don't know how to work this shit can someone fucking help me?
kala6li
03-13-2013, 08:08 AM
Hey, i'm getting this
[Error] D:\Downloads\RandFletcherv1.1.2 (5).simba(13:15): Unknown type 'TComboBox5' at line 12
Compiling failed.
Is this part of the antileach too ?
kala6li
03-13-2013, 08:41 AM
nvm, fixed.
kala6li
03-13-2013, 09:10 AM
Whats this? When i enter my account info and click start nothing happens and also got this,
[Hint] D:\Downloads\RandFletcherv1.1.2.simba(207:10): Variable 'Result' never used at line 206
kala6li
03-13-2013, 11:01 AM
Help plz
rotflolmao
03-14-2013, 02:29 AM
First time ever touching scripting, so solving anti leech was very hard. But I did it by comparing and contrasting two scripts, kinda learned the idea. I can get it to start but it won't login me in and I got this
[Hint] C:\Users\x\Downloads\RandFletcherv1.1.2.simba(206: 10): Variable 'Result' never used at line 205
I'm scared I might've messed up something I wasn't supposed to touch? Have I solved everything
Neodymium
03-14-2013, 02:53 AM
First time ever touching scripting, so solving anti leech was very hard. But I did it by comparing and contrasting two scripts, kinda learned the idea. I can get it to start but it won't login me in and I got this
[Hint] C:\Users\x\Downloads\RandFletcherv1.1.2.simba(206: 10): Variable 'Result' never used at line 205
I'm scared I might've messed up something I wasn't supposed to touch? Have I solved everything
No, that is not a problem. I get the same thing. I'm pretty sure it is because he had the function declared to return a boolean, yet it doesn't at all. It doesn't affect the script though.
Now, about the script:
I am a bit laggy at times, so I had to increase the wait period before right-clicking the Longbow interface.
However, it does fail sometimes, so I would have to increase the wait time yet again, but...
I'm sure you can come up with a detection for when the Longbow interface has popped up, such as searching for "Longbow" (or the title, I just don't know it off the top of my head) in the chat box.
Also, it tends to repeat itself if it has the last batch of logs (less than 27), but then again most scripts do that as well.
Other than those minor issues, it works great. Keep it up. :)
rotflolmao
03-14-2013, 03:34 AM
No, that is not a problem. I get the same thing. I'm pretty sure it is because he had the function declared to return a boolean, yet it doesn't at all. It doesn't affect the script though.
Now, about the script:
I am a bit laggy at times, so I had to increase the wait period before right-clicking the Longbow interface.
However, it does fail sometimes, so I would have to increase the wait time yet again, but...
I'm sure you can come up with a detection for when the Longbow interface has popped up, such as searching for "Longbow" (or the title, I just don't know it off the top of my head) in the chat box.
Also, it tends to repeat itself if it has the last batch of logs (less than 27), but then again most scripts do that as well.
Other than those minor issues, it works great. Keep it up. :)
Naw I'm pretty sure something's messed cause nothing happens when I click start. I exit the form and smart pops up like a minute later and nothing happens
Simbarules
03-14-2013, 03:48 AM
[Error] C:\Simba\Scripts\RandFletcherv1.1.2.simba(7:10): is ('=') expected at line 6
Quite stuck on this if someone can help me out.
Wopey
03-14-2013, 05:23 AM
I watched and read tuts, I guess I won't be enjoying the script since I can't figure out the first anti-leach,
I bet in the future, I will call myself a dumb*** for not figuring in out...
:(
You did not have to make it that hard you know brother, But nice spits, It very neat :D
Simbarules
03-14-2013, 07:04 AM
To Rand or anybody that can help me,
I hit start and nothing happens. Is it not working or do I have to add/remove another line of code?
The GUI loads just fine, the start button just does not work.
Thanks
Lord Waffles
03-14-2013, 04:08 PM
EDIT: This was back in the days when I was a little froob ;)
Simbarules
03-14-2013, 04:10 PM
Program compiles fine, GUI pops up and works fine...go to start it with smart8
and in the console it says "Socket Dissconnected; unpairing".
Any ideas? Could it be it's not compatible with smart8?
When you hit "START" on the GUI, does it work for you?
Nothing happens when I click it. Is the GUI not functional..?
Lord Waffles
03-14-2013, 04:12 PM
When you hit "START" on the GUI, does it work for you?
Nothing happens when I click it. Is the GUI not functional..?
No the GUI works fine for me, it loads smart and everything.
Simbarules
03-14-2013, 04:21 PM
No the GUI works fine for me, it loads smart and everything.
Would you mind adding me on skype/PMing me so we can compare code? I've already removed all of the anti leeches so im not asking for that.
I just want to get my GUI to function. Skype- Dannyd120
Lord Waffles
03-14-2013, 05:36 PM
Would you mind adding me on skype/PMing me so we can compare code? I've already removed all of the anti leeches so im not asking for that.
I just want to get my GUI to function. Skype- Dannyd120
I'm a bit busy atm, currently working on my own auto-Fletcher since I can't seem to get this one to work right for me.
My House
03-15-2013, 12:32 AM
what is this Unknown type 'TComboBox5' at line 12?
drics07
03-15-2013, 07:29 AM
Can someone help me I need to compare scripts for this error...Exception in Script: Unknown compiler directives at 4:3.
I know how to fix it but I can't, I'm not sure on some parts how far to "space" out so please help. I figured out the leeches so don't need help on that. Please message me!
OH GOD!!!!
I Finally did it, i solved it and im proud myself!
Great script at all!!
justaddictonpc
03-15-2013, 09:01 PM
As for feedback the latest version is a bit buggy.
Tt works well for arround 5 minutes and then it fails to actually go further fletching (either it clicks randomly across the bank or it just stops after having fletched 10 bows because it clicked make 10 instead of make X).
I'm experiencing this at the varrock east and the catherby bank the other one i didnt test yet.
Hope this is usefull to make some progress in this script.
ps: Your auto stringer works without any flaws so far! Keep up the good work!
drics07
03-16-2013, 05:57 AM
Can someone help me I need to compare scripts for this error...Exception in Script: Unknown compiler directives at 4:3. I know how to fix it but I can't, I'm not sure on some parts how far to "space" out so please help. I figured out the leeches so don't need help on that. Please message me!
Tocholoko
03-16-2013, 11:04 AM
can someone message me thru pm i need help with this i solved most anti leech since gui pops up but i get this
C:\Users\User\Downloads\RandFletcherv1.1.2.simba(2 07:10): Variable 'Result' never used at line 206
some help plox.
sweed
03-16-2013, 12:12 PM
i cant find the anti-leech... worked on it for an while now...
Xenotru
03-16-2013, 12:14 PM
Putting anti-leech in your scripts are no longer allowed. There's about 7-9 days left to remove the anti-leeches I believe.
Coh3n said:
"Scripters,
Adding anti-leech to your scripts is against the SRL scripting rules. You have two weeks to remove any anti-leech from your scripts, otherwise your thread will be closed, and your script removed. If after two weeks, you find a script with anti-leech, please report it so proper action can be taken."
So don't worry guys, it's just a matter of time now. Also, I'd like to add that the idea of this script looks really great, and I can't wait to use it.
Best of regards,
Xenotru
killyoulol
03-16-2013, 04:46 PM
Putting anti-leech in your scripts are no longer allowed. There's about 7-9 days left to remove the anti-leeches I believe.
Coh3n said:
"Scripters,
Adding anti-leech to your scripts is against the SRL scripting rules. You have two weeks to remove any anti-leech from your scripts, otherwise your thread will be closed, and your script removed. If after two weeks, you find a script with anti-leech, please report it so proper action can be taken."
So don't worry guys, it's just a matter of time now. Also, I'd like to add that the idea of this script looks really great, and I can't wait to use it.
Best of regards,
Xenotru
For half of the antileechs he tells you where it is exactly... just compare scripts, it's not very difficult to figure out
XXO Chris OXX
03-16-2013, 11:04 PM
Hahahaha what an epic anti leech.
runner123
03-16-2013, 11:22 PM
Whenever i run the script it doesnt let me write all of my log in as if it is to long? also the start button doesnt seem to do anything? have i fixed all anti leech properly? i believe i have
sm0k3b4rr4g3
03-17-2013, 12:03 PM
Exception in Script: Unknown compiler directives at 4:3 what's this? :( i don't know much. help me maybe
Brucewillis
03-17-2013, 09:47 PM
what is this useless obsession with putting in anti-leaches on this forum when you could just save it for yourself if you didn't want to share.
stupidly pretentious
dblurxd
03-18-2013, 01:07 AM
Ok I may be a super big noob but I think I did all the right things and this only shows up. "Exception in Script: Unknown compiler directives at 4:3" Help please! Sorry if I'm stupid!
sm0k3b4rr4g3
03-18-2013, 07:54 AM
What about the Red texT? i really don't know much about stuff and coding. what can i do with "Exception in Script: Unknown compiler directives at 4:3"
tariko8
03-19-2013, 06:27 PM
Can someone help me i keep getting this error :
Exception in Script: Unknown compiler directives at 4:3
My House
03-21-2013, 05:45 PM
remove ur antileech if you have one, or im reporting
iTimmy
03-22-2013, 07:03 AM
You're not aloud antileachs, gg on your script.
Shit script anyway
drics07
03-22-2013, 07:33 AM
Thats the anti-leech. 3 more days til scripters have to remove anti-leechs or their scripts will get removed. So just wait.
jamiedatank
03-22-2013, 01:27 PM
sorry i have the same question what is "Exception in Script: Unknown compiler directives at 4:3" just followed guide to set it up for 07 (literally biggest noob at botting and coding)
sorry i have the same question what is "Exception in Script: Unknown compiler directives at 4:3" just followed guide to set it up for 07 (literally biggest noob at botting and coding)
You have to solve the anti leech. Im new at this too and im trying to figure it out. Looks like it wont matter anyways because they mentioned they are removing this.
jamiedatank
03-22-2013, 08:25 PM
Yeah just saw that they are talking about removing it, hopefully soon i wanna bot my fletch :) tried my hardest to solve it but no one can help me :/
killyoulol
03-23-2013, 12:38 AM
Yeah just saw that they are talking about removing it, hopefully soon i wanna bot my fletch :) tried my hardest to solve it but no one can help me :/
Have you taken the look at the tutorial?
dldupree1
03-23-2013, 03:39 AM
i fixed all the anti leeches and i get this error
[Error] C:\Simba\Includes\SRL/SRL.Simba(8:109): 'BEGIN' expected at line 7
Compiling failed.
malone8965
03-25-2013, 04:41 PM
remove the anti leech
A mod should lock this thread considering the rules added the previous day
Ruthul
03-27-2013, 12:35 AM
To my knowledge anti-leach is no longer allowed and was to be removed.
Snowskate
03-27-2013, 01:06 AM
I actully enjoyed doing this anti leech, it was quiet comical and enjoyable. Works GREAT. I edited a few things and simply added it to work at Seers village. So simple :p.
Thank you very much for leaving this script up here.
Anatomical
03-27-2013, 02:25 AM
How do I do the Anti-Leech? Can somebody please help meee? :)
jakeandchase
03-28-2013, 01:28 PM
Why are people so rude? Anti-leeches honestly need to stay.
Sabre
03-29-2013, 04:42 AM
Have you taken the look at the tutorial?
Link please? I tried removing anti leech too but it didn't work
Anatomical
03-29-2013, 04:53 AM
Why don't you people use Waffle's Power Fletcher? It's way better than this one.
Ashaman88
07-14-2013, 08:45 PM
moved to outdated.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.