After you level up, it bugs out and continuously goes up and down the stairs. Also, it seems to run around randomly after the first few loads. Needs some work.
Printable View
After you level up, it bugs out and continuously goes up and down the stairs. Also, it seems to run around randomly after the first few loads. Needs some work.
gets an error while trying to get to the bank a lot. will end up opening the door next to the spinning room for no reason also. it also will go up and down the stairs a lot for no reason. when banking it missclicks and stands on the outside off the bank and just sits there if it can't see the bank. it also sometimes gets stuck on the 2nd floor in the room with the duke or whatever his name is that is used for dragon slayer. there needs to be a few things patched :P
never runs for more than a few minutes, and antirandoms are terrible. gotten 4 so far, failed at every single one
also in bank, it clicks 20 times at various spots before it finally gets the banker
amazingly well written script
it only runs for like 10minutes maximum. then always gets error walking to bank.. it just stands around in the wheel room or in the hallway by the stairs... sigh..
broken script doesnt work - lucky to get 1 run, will get stuck at stairs thinking it has alredy gone down from the bank, the error will be failed to find spinner. even though it has not yet descended the stairs. ah well
All it does it spam "Error Walking to Wheel. Retrying..." when it is next to the stairs.
NextPlayer(False)
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
All players not active!
Exception: Range check error at line 378
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge, 2, 3, 4, 5, 6, 7]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
I am getting the following, been trying on my own to fix it but nope.
U can use my char to test Frement if u want, couldn't get your script working properly. It had area checking bugs.
Not working for me. It works for 2 mins and breaks..
Picture of error any my screen; http://puu.sh/2Mhpo.jpg
Please help!
So this was working fine for me for about a week, then all of a sudden im starting to get an error at line 55 any suggestions?
Compiled successfully in 764 ms.
SRL Compiled in 0 msec
Script has been updated to version 0.9, please reload script.
Successfully executed.
I keep getting this but I dont know were to get the new version. D: helps me
Not working, 2 runs and stuck...
This, I havent finished more than 2 loads with any of the scripts available. There doesn't seem to be any simba scripts that work well yetQuote:
Originally Posted by rock hard
WARNING: Your nickname isn' found in the players name with player: (my email)
SRL Compiled in 32 msec
Script version 0.9 is up-to-date.
NextPlayer(False)
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge, 2, 3, 4, 5, 6, 7]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap, 3]
This is what i get now D:
And when it did work nothing opens up (like the game). just my mouse cursor go's around my screen like crazy opening random files then stops. Also i just want to state I'm new to all this stuff so I'm really bad with scripts. But the other scrips in which i use work fine just this one doesn't work for me.
gets stuck sometimes :/
First time running the script and it isnt looking good.
Its all retarded and shit..
Can't even manage 1 run..
ALTHOUGH thank you very much for making this script.
the script messes up a lot =\
messes up when going up stairs, then just spams can't find bank(needs validation)
types 9999 into chat a lot from entering flax. idk why
add TypeSendEx(IntToStr(RandomRange(28,40)), false);
Starts up then stops. I've reloaded the script.Quote:
Compiled successfully in 514 ms.
SRL Compiled in 0 msec
Paired with SMART[6856]
Script has been updated to version 0.9, please reload script.
Successfully executed.
you have to save it and when it says that reopen the script and it will automaticly update and you'll be good.Quote:
Originally Posted by iTimmy
dont just reopen it you have to save it update then reopen from saved spot
it says: Script has been updated to version 0.9, please reload script. I close script and re-open, still doesnt open
I have taken a screen shot of whats happening to me, everything else including getting the flax out and spinning it works fine, but when it has to go back up this is what happens. (iv'e marked where it also stands(including where it currently is standing) when its supposed to be going back up stairs, with and X, u'll see if you check the image.
Attachment 21251
i am using smart8, when i click "run" its not opening the client. why?
Works fine for short amounts of time but needs to be babysat for best results
Struggles to target the spinning wheel, gives up and runs back and forth from the spinning wheel to the bank. This repeats over and over until I manually intervene
I'm new here, and have no idea how to set up lines 5-28. Can someone give me a quick guide? I have everything ready, I just don't know where to put the information in and what it's asking for. Thanks.
Script works fantastic. It could be a little faster, but still very stable. Out of 2k bowstrings it only messes up due to randoms that SRL cannot solve
I get this when trying to start ?
For more information, visit http://www.villavu.com/forum/showthread.php?t=5410
SRL Compiled in 31 msec
Script version 0.9 is up-to-date.
NextPlayer(False)
SwitchToPlayer(PlayerNo: 0, Active: False);
NextPlayer(False)
Just keeps changing players ? I have chagned Actice to True and False but always reads False..
Compiled successfully in 655 ms.
SRL Compiled in 0 msec
OpenFile - Exception. Could not open file: C:\Simba\Scripts\FlaxSpinner.simba
Error: Exception: Invalid FileNum passed: -1 at line 68
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
What does that mean? How can I fix?
Mainly the third line, make sure the file is saved there and try running simba as admin.Quote:
Originally Posted by Kyle9004
You might not be setting your player up correctly, try going to the link that was posted(http://www.villavu.com/forum/showthread.php?t=5410)Quote:
Originally Posted by wogtaz ryder
Error: Out Of Range at line 12
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
What does this mean?
It just spazzes out in the spinning room.
Does this have any anti-leech in it?
Thank you for using Simba,
Hakuna Matata.
Compiled successfully in 579 ms.
SRL Compiled in 15 msec
Script has been updated to version 0.9, please reload script.
Successfully executed.
Why is it doing this?
save the file as. dont just close it down then re open itQuote:
Originally Posted by bumble
has anyone fixed this yet cuz i can't figure it out...
Error: Exception: Invalid FileNum passed: -1 at line 68
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
For more information, visit http://www.villavu.com/forum/showthread.php?t=5410
SRL Compiled in 62 msec
Script version 0.9 is up-to-date.
NextPlayer(False)
SwitchToPlayer(PlayerNo: 0, Active: False);
+----------------------------------------------+
| Flax Spinner ver 0.9 |
+----------------------------------------------+
| Time running: 47 Minutes and 34 Seconds |
+----------------------------------------------+
| Player: sky |
| - Trips made: 21 |
| - Bow strings crafted: 559 |
| - Bow strings per hour: 705.12 |
+----------------------------------------------+
not bad, very unstable though. Tons of bugs, but it is a great start. Had to keep on eye on it, but for the most part it was good.
it's a piece of crap that you have made bro.
Its not really it has codes just doesn't work!