[RS3] [SRL-6] iKaramjaFisher [Harpoons, cages, and notes at Stiles!]

Printable View

Show 40 post(s) from this thread on one page

01-19-2015, 05:48 PM
Pompus

I apologize in advance if this is something obvious I am missing but every time I start the script nothing happens.
It loads the client, that is about it.

-- setupSRL()
---- Setting up SRL...
---- attempting to spawn smart, attempt #: 1
---- initSmart():
------ Attempting to pair to a previously spawned client
------ smartPairToExistingClient():
-------- Found 2 free client(s), attempting to pair to one...
---------- smartSetAsTarget(): Succesfully set SMART[41] as Simba's target
-------- Succesfully paired to a existing client, SMART[41]
------ smartPairToExistingClient(): result = true
------ Succesfully initialized via pairing to a previously spawned client
---- initSmart()
------ smartSetupDrawing(): Succesfully setup SMART drawing
---- Waiting up to 5 minutes for RS to load...
---- 1 minute(s) have passed, client is not ready yet
---- 2 minute(s) have passed, client is not ready yet
---- 3 minute(s) have passed, client is not ready yet
---- 4 minute(s) have passed, client is not ready yet
---- Client is taking too long to load, terminating...
-- setupSRL(): False

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (20-01-15 at 03.37.16 AM).txt] has not been freed in the script, freeing it now.
01-19-2015, 05:52 PM
KeepBotting

Quote:

Originally Posted by Pompus

I apologize in advance if this is something obvious I am missing but every time I start the script nothing happens.
It loads the client, that is about it.

-- setupSRL()
---- Setting up SRL...
---- attempting to spawn smart, attempt #: 1
---- initSmart():
------ Attempting to pair to a previously spawned client
------ smartPairToExistingClient():
-------- Found 2 free client(s), attempting to pair to one...
---------- smartSetAsTarget(): Succesfully set SMART[41] as Simba's target
-------- Succesfully paired to a existing client, SMART[41]
------ smartPairToExistingClient(): result = true
------ Succesfully initialized via pairing to a previously spawned client
---- initSmart()
------ smartSetupDrawing(): Succesfully setup SMART drawing
---- Waiting up to 5 minutes for RS to load...
---- 1 minute(s) have passed, client is not ready yet
---- 2 minute(s) have passed, client is not ready yet
---- 3 minute(s) have passed, client is not ready yet
---- 4 minute(s) have passed, client is not ready yet
---- Client is taking too long to load, terminating...
-- setupSRL(): False

[WARNING] : *** Terminating script ***

[DEBUG] : Logging out
[DEBUG] : Freeing BMPs
Error: The bitmap[0] does not exist at line 3846
Execution failed.
The following bitmaps were not freed: [SMART Debug Image]
File[C:\Simba\Includes\SRL-6/logs/SRL log (20-01-15 at 03.37.16 AM).txt] has not been freed in the script, freeing it now.

Set up RS as detailed in this thread: https://villavu.com/forum/showthread.php?t=47714
01-21-2015, 11:13 AM
TotalMassacre

Quote:

Originally Posted by mkmk4

haha I'm 100% sure it was not! It would do that every second until it logs out. also another time it would run then on the way back it would get "lost" right beside the dock and log out. I'll edit this post with the smart window when I get home.

here you go...
Attachment 24750

EDIT: I tried restarting my computer and the script seems to be working fine now. I'll let you know how it goes. Strange... I dont really understand how that happened. I'm guessing some kind of really bad memory leak... Then again I don't think your scripts stores any dynamic memory. Well let me know what you think.

Really weird, I had the same exact problem last week but decided to give it another shot last night and voila it works. I haven't changed anything other than restarting my comp. Anyways here's a 9 hour prog. Thanks for the great script as always KB!

http://i.imgur.com/lOxaOzX.png
01-21-2015, 12:31 PM
KeepBotting

Quote:

Originally Posted by TotalMassacre

Really weird, I had the same exact problem last week but decided to give it another shot last night and voila it works. I haven't changed anything other than restarting my comp. Anyways here's a 9 hour prog. Thanks for the great script as always KB!

http://i.imgur.com/lOxaOzX.png

Thanks for the proggy :)
01-22-2015, 10:25 PM
TotalMassacre

http://i.imgur.com/10vPi9W.png

Longest one I've done :D
01-24-2015, 11:37 PM
BadIdea

Finally got this scipt working after some trial and error. Something as little as not typing in your username correctly in the setup will prevent it from working. I had to go back and visit the "how to install/setup simba" thread and did everything it said, so now the scripts working great so far. I did notice just now that the script went to stiles without having a full inventory, but that's not that serious to me.
01-25-2015, 01:49 PM
TotalMassacre

Quote:

Originally Posted by BadIdea

Something as little as not typing in your username correctly in the setup will prevent it from working.

Well I don't think that's a "little" mistake :D :D
01-26-2015, 12:21 AM
xon353

awesome script and works really well, struggled to get it to work on my own stupidity by having the transparency all the way to %100 instead of %0 =D
01-26-2015, 12:22 AM
KeepBotting

Quote:

Originally Posted by TotalMassacre

http://i.imgur.com/10vPi9W.png

Longest one I've done :D

Thanks!

Quote:

Originally Posted by BadIdea

Something as little as not typing in your username correctly in the setup will prevent it from working.

Well ... yeah. I'd have thought that was obvious. If you type your username wrong, you're going to get an error. That's the case with every authentication system ever.

Quote:

Originally Posted by TotalMassacre

Well I don't think that's a "little" mistake :D :D

;)

Quote:

Originally Posted by xon353

awesome script and works really well, struggled to get it to work on my own stupidity by having the transparency all the way to %100 instead of %0 =D

Thanks for the feedback. That's a common mistake, no worries! I'm glad you were able to get it working.
01-26-2015, 10:57 PM
BadIdea

I've been using this script for a few days, and it's going great. I'll post my progress soon. Is there a break handler for this script?
01-27-2015, 02:18 AM
KeepBotting

Quote:

Originally Posted by BadIdea

I've been using this script for a few days, and it's going great. I'll post my progress soon. Is there a break handler for this script?

Thanks for the feedback. No, there is no breaking.
02-07-2015, 08:30 PM
The Mayor

Works good ;) I will probably fish a whole bunch of lobbys on my HCIM

http://puu.sh/fBBmT/2e506b01f0.png

That logout on terminate is the worst feature in the whole world :p
02-07-2015, 08:49 PM
Theron

Quote:

Originally Posted by The Mayor

Works good ;) I will probably fish a whole bunch of lobbys on my HCIM

http://puu.sh/fBBmT/2e506b01f0.png

That logout on terminate is the worst feature in the whole world :p

agreed. ;)
02-07-2015, 08:57 PM
KeepBotting

Quote:

Originally Posted by The Mayor

Works good ;) I will probably fish a whole bunch of lobbys on my HCIM

http://puu.sh/fBBmT/2e506b01f0.png

That logout on terminate is the worst feature in the whole world :p

Quote:

Originally Posted by Theron

agreed. ;)

Is it really? I find it incredibly annoying when developing, but I usually comment it out or force-terminate the script. I thought it'd be better than letting the player idle for 5 minutes until logout.

Thanks for the proggy Mayor!
02-09-2015, 11:32 PM
Pmh1000

1 Attachment(s)

Awesome Script here is a proggy!
http://s4.postimg.org/vz8bh0bx9/proggy.jpg
02-10-2015, 02:33 AM
jbatt99

script works until it comes time to log in. when the client loads up i get the message "waiting up to 5 minutes for RS to load..." and so on until the 5 minutes is up and then says it will free a SRL script. but still continues no to work. can anyone help with this problem? Thanks!
02-10-2015, 02:58 AM
The Mayor

Quote:

Originally Posted by jbatt99

script works until it comes time to log in. when the client loads up i get the message "waiting up to 5 minutes for RS to load..." and so on until the 5 minutes is up and then says it will free a SRL script. but still continues no to work. can anyone help with this problem? Thanks!

Your graphics settings are incorrect.
02-11-2015, 02:22 AM
Pmh1000

Quote:

Originally Posted by jbatt99

script works until it comes time to log in. when the client loads up i get the message "waiting up to 5 minutes for RS to load..." and so on until the 5 minutes is up and then says it will free a SRL script. but still continues no to work. can anyone help with this problem? Thanks!

I initially had that issue. Make sure you are using direct x in both SRL player manager and runescape itself.
02-12-2015, 07:37 PM
MCPunk3108

Im not sure if someone has mentioned this before or not but sometimes when i check on the script it has the notes window open ingame and it just endlessly runs between the dock and stiles. Once i close the window it works just fine again. Thought id point it out!
02-12-2015, 09:40 PM
KeepBotting

Quote:

Originally Posted by MCPunk3108

Im not sure if someone has mentioned this before or not but sometimes when i check on the script it has the notes window open ingame and it just endlessly runs between the dock and stiles. Once i close the window it works just fine again. Thought id point it out!

The script opens random gametabs as an antipattern. If your interfaces are configured to open certain gametabs in nonstandard places (i.e. over the mainScreen or minimap) it could break the script.

So, reset your interfaces to the Old School preset and that should no longer happen
02-13-2015, 04:27 AM
brenden17

i get an error compiling when i try to launch the Error: The Box you passed to Rectangle doesn't have normal bounds: (1,777) : (576,598) at line 77
Execution failed. i know this is in the drawing script but im lost and i have no idea what to do :/ can you help me please keep botting?:c
02-13-2015, 12:15 PM
KeepBotting

Quote:

Originally Posted by brenden17

i get an error compiling when i try to launch the Error: The Box you passed to Rectangle doesn't have normal bounds: (1,777) : (576,598) at line 77
Execution failed. i know this is in the drawing script but im lost and i have no idea what to do :/ can you help me please keep botting?:c

Post a screenshof of your SMART window (logged in)
02-14-2015, 06:14 PM
Suite Pee

1 Attachment(s)

Every time I try to use the script I get an error saying "*** FATAL ERROR: Failed to handle walking!". I have no idea what to do, can you help?? thank you!
Attachment 25028
02-14-2015, 07:07 PM
KeepBotting

Quote:

Originally Posted by Suite Pee

Every time I try to use the script I get an error saying "*** FATAL ERROR: Failed to handle walking!". I have no idea what to do, can you help?? thank you!
Attachment 25028

https://villavu.com/forum/showthread.php?t=47714
02-14-2015, 11:11 PM
Notplayingrs

1 Attachment(s)

5 hour prog for you! :)

Attachment 25029
02-15-2015, 05:21 PM
destinyxx

Awesome script ran perfectly for 10hrs +
02-15-2015, 09:56 PM
lachieeeeeee

1 Attachment(s)

Just a quick proggy! Awesome Bot, still going trying to beat your best 51 hour proggy :P hopefully that ban hammer stays away from me XD

Attachment 25040
02-16-2015, 12:23 AM
Wiqkszon

When I run this script Simba open 2+ SMART screen and do nothing what's the problem?
02-16-2015, 12:32 AM
KeepBotting

Quote:

Originally Posted by Notplayingrs

5 hour prog for you! :)

Attachment 25029

Quote:

Originally Posted by destinyxx

Awesome script ran perfectly for 10hrs +

Quote:

Originally Posted by lachieeeeeee

Just a quick proggy! Awesome Bot, still going trying to beat your best 51 hour proggy :P hopefully that ban hammer stays away from me XD

Attachment 25040

Thanks guys.

Quote:

Originally Posted by Wiqkszon

When I run this script Simba open 2+ SMART screen and do nothing what's the problem?

Post debug output and a screenshot of your graphics settings (RuneScape)
02-16-2015, 02:55 AM
Notplayingrs

Quote:

Originally Posted by KeepBotting

Thanks guys.

Post debug output and a screenshot of your graphics settings (RuneScape)

Forgot to mention all the flower petals ive been getting... Ive made SOO much more money because of those!
02-18-2015, 08:10 AM
ltztakechi1

Error: The Box you passed to Rectangle doesn't have normal bounds: (1,611) : (576,598) at line 77
HEEEEEEEEEEEEEEEEEEELP???
02-18-2015, 08:12 AM
ltztakechi1

i have the same problem for any reason has this been fixed?
02-18-2015, 03:03 PM
KeepBotting

Quote:

Originally Posted by ltztakechi1

Error: The Box you passed to Rectangle doesn't have normal bounds: (1,611) : (576,598) at line 77
HEEEEEEEEEEEEEEEEEEELP???

Quote:

Originally Posted by ltztakechi1

i have the same problem for any reason has this been fixed?

No need to double-post. The edit button is there for a reason, plus I'm pretty active and get notifications whenever someone replies to my threads.

As for your issue: re-read the RS3 setup thread slowly and carefully. Take note of each step and make sure you've followed it correctly.
02-19-2015, 09:31 PM
spaghettijohnson

FYI, it mouses over your character if you're wearing the Investigator outfit. Don't wear it.
02-19-2015, 11:43 PM
KeepBotting

Quote:

Originally Posted by spaghettijohnson

FYI, it mouses over your character if you're wearing the Investigator outfit. Don't wear it.

Yeah I don't filter points out of the playerBox at any point :p I'll have to remember to fix that
02-19-2015, 11:50 PM
blur241

1 Attachment(s)

The script works great, had it running overnight with no problems. Thanks!
Attachment 25063
02-20-2015, 06:27 AM
spaghettijohnson

I ran the bot for almost 8 hours straight with no issues. Don't have a progress report because I closed it while playing another game.
02-21-2015, 04:26 PM
KeepBotting

Quote:

Originally Posted by blur241

The script works great, had it running overnight with no problems. Thanks!
Attachment 25063

Quote:

Originally Posted by spaghettijohnson

I ran the bot for almost 8 hours straight with no issues. Don't have a progress report because I closed it while playing another game.

Thanks guys :)
02-28-2015, 04:03 PM
spaghettijohnson

i.imgur.com/uXns44A.png
02-28-2015, 04:43 PM
KeepBotting

Quote:

Originally Posted by spaghettijohnson

http://i.imgur.com/uXns44A.png

Thanks :)

Show 40 post(s) from this thread on one page