Printable View
You know a spirit tree
Who comes up somethimes and kill you ?
You should make Something that runs from fights just that run from fights Cause i get killed everytime by spirit tree
But just focus on Something that runs away from fights and comes back later
Like he runs to bank when he gets attacked
And goes bank again when he is at bank
Then spirit tree is gone and u can Script again without you end up at Lumbrigde
Ahhhh a Tree Spirit... A Spirit Tree is something very different.. ;)
This already exists in the program and was broken with the release of SRL 12 & 13.. This was an error within SRL and not my error, it will be fixed in SRL14.
I implimented a temporary fix in V1.10 to overcome the SRL bug, however due to a small mistake on my part the fix only works if you have a pin number set!:duh: v1.11 which will be released shortly will address this..
As a quick an simple fix until V1.11 is out and if you don't use a bank pin just set the bank pin in the script to: 0070 and find fight will work.
Ok Ok I will do that buy you should still fix it
In next version
And good luck with new Version couse u scripts rocks :)
If i whas a scripter i would help you with the scripts Cause im like you biggest fan
It's never too late to start Scripting, i used to use scripts for like 2 months then i decided to learn something, too. :)Quote:
Originally Posted by FagetHax0r
Eerik.
Hey why do you use "OpenBankFast('eb')"?
Because it's a simple quick and easy way of opening the bank interface. Should I be using something else? :confused:
eb stands for edgeville bank.. if you want to use it in your script use db for Draynor bank..
all the codes are: 'akb' for 'al kharid', 'lb' for 'lumbridge', 'veb' for 'varrock east', 'vwb' for 'varrock west', 'feb' for 'falador east', 'fwb' for 'falador west', 'db' for 'draynor', 'eb' for 'edgeville bank'
Oh...duh I'm stupied. I thought yours was a Draynor Banker too (thats why I was asking why you were using 'eb'), for a sec. Yea I already know about all the banks and how to use. I use OpenBankQuiet, it is better, cause it won't move the mouse 100x while trying to find bank.
Your right, the Runinng part of FindFight is corrupted.
I'll look into OpenBankQuiet a bit more.. but as they say.. If it aint broke dont fix it!Quote:
Originally Posted by osmm
As I said all you have to do is populate Players[CurrentPlayer].Level[8] with the CurrentPlayers max hitpoint value. I do it like this: Players[CurrentPlayer].Level[8] := GetSkillInfo('hitpoints', False); (I accidentally populated it with the bank pin in V1.10.. which meant player would always run even if another player was fighting.. better to be safe than sorry! (h) ).Quote:
Originally Posted by osmm
If you want to find a bit more about the error you can read this: click here
I have now fixed this problem. No options to set, it should cope with it all automatically. :) Simple!Quote:
Originally Posted by sk80rdie76
I second osmm's response.. It's never too late to learn.. By getting this far you have demonstrated you have the aptitude to do it.. As far as being my biggest fan... very flattering & also very frightening :eek: Save the Fan thing for someone truly worthy..Quote:
Originally Posted by FagetHax0r
New Version Now out V1.11 beta
Attachment 10224 non S.M.A.R.T. version.
Attachment 10225 S.M.A.R.T. version.
V1.11 beta Fixed my previous FindFight Fix. Fighting Randoms should be detected for everyone now.
.........Major overhall of my FindTheAxe function turning it into a completely self contain function.
.........Added Woodcutting/Attack Level checking & handling to FindTheAxe function.
.........Added option to FindTheAxe to set axe position.
.........Added a variable to FindTheAxe to determine axe location.
.........Updated MyFindBirdsNest to return the GameTab position to where it was at before it was called.
Attachment 10224 non S.M.A.R.T. version.
Attachment 10225 S.M.A.R.T. version.
Don't got permission to go to thread. What exactly is Players[CurrentPlayer].Level[8]? Just the HP for the player. So I'm assuming that SRL looks at the wrong state or something like that. A simple typo perhaps? Anyways temporarily I have done like MK in his VEM and just coordclicked a run away / run back thing. Also I think in the EntFinder I just had to change "MouseFindNoFlag(MMCX, MMCY, -5, 5);" to "MouseFindNoFlag(MMCX, MMCY, 5, 5);". Thats what I did and everything runs smooth. I hope now my script is, as I say "an 8 hour script". As in I can run it while at school / asleep and it won't stop. If I can achieve that, I will probably add a player form then submit for members. Since I'v already gotten 13k willows from it...
EDIT: Atm actually it is doing very well, my beta version (I am personaly testing) has been going for around an hour, no fights yet to test it out, but says it found 2 Ents.
Players[CurrentPlayer].Level[x] is an array of all the players Levels. x indicates which level so 8 is hitpoints. It's up to you to populate this array and most scripts don't populate it as it is unecessary and time consuming when most of these values wouldn't be used.Quote:
Originally Posted by osmm
FindFight looks for the hitpoint flashes to find if there is a fight in the area. If it finds a fight it then starts checking your hitpoints and if they go below 100% it returns true. The function was changed slightly because the players hitpoints are now always visible and so switching gametabs all the time was not necessary. In order to do this, maximum hitpoints always has to be known and this is where the error comes in.
The function checks to see if Players[CurrentPlayer].Level[8] is populated and if it isn't, it populates it. The bug is that the tiny routine uses min value instead of max value and therefore always populates Players[CurrentPlayer].Level[8] with 1 instead of the users real hitpoint value. This of course doesn't happen if it already has the correct value in it.
I hope my explanation makes some sense to you, it probably could have been less wordy. :redface:
Remember Findfight does not run away, all it does is return true or false. It's up to you to run if the value is true.
As I said this now works perfectly in my script as of V1.11..
SCAR Code:##################################################################
Simple Yew Cutter & Banker (Edgeville) V1.11s beta
Ran for: 4 Hours, 07 Minutes and 9 Seconds
Loads Banked: 27
Yew Logs Banked: 751
Birds Nests (Seeds) Banked: 3
Random Event Items Banked: 2
You Started at Level 93 you are still at Level 93
You earned 131,425xp This session with 70,258xp to the next Level
Script Ended: Not Logged in During Procedure: FindBothYews.
##################################################################
Prisoner did it again
Btw i post proggy soon :(h): :)
You scripts just owns i cant stop saying that
Best scripts there is
Thank you.. I'm very pleased you like the script..
as you like it so much how about rating this thread?
I Did 5 stars
And i know some things for next version add Dragon axe too Cause this scripts makes me alot of money so i gonna buy Dragon Axe too
And tip for players. If you dont use you computer dont use smart cause if you computers goes to screen saver smart stops and if you just use autoos if You gone or something just use normal scar
Thanks.. anyone else want to rate this thread? please go ahead! :)Quote:
Originally Posted by FagetHax0r
The script supports using a Dragon Axe, it has done since release... have you ever read the feature list on page 1? :rolleyes: you keep asking for features that it already supports!Quote:
Originally Posted by FagetHax0r
As a tip.. turn off your screensaver and just switch your monitor off when not using it. That way you can still use smart and not be there..Quote:
Originally Posted by FagetHax0r
Lol Sorry but it say at first post doesnt support dragon axe
But i got laptop dont want to Turn screensaver off everytime
quite clearly says on the first page "Uses all Axes including Dragon"Quote:
Uses all Axes including Dragon
yeah turning you screensave off on your laptop may not be such a good idea. :)
Ooh i think i need glasses Lol
But i THANK YOU FOR THIS SCRIPTS
I know how everything works in this scripts now that i cant use smart when im leaving ETC. But when it stopped everytime cause i didnt know much about it i made only in a week 500k But now i know how i can really get the best of this scripts i gonna try this a week again and then i tell you how much money i maked
New Version out Now V1.12 beta
Attachment 10239 non S.M.A.R.T. version.
Attachment 10240 S.M.A.R.T. version.
SCAR Code:// V1.12 beta Added Variable TypeOfAxe to the FindTheAxe. Returns the Type of Axe that is being used.
// Made some small changes in readiness for the switchover to a Multi-Player Script.
// Implemented new quick check function as a failsafe to check axe is present while chopping.
// Added a check to make sure a valid world is selected for S.M.A.R.T.
// Improved Strange Plant Finder and now also detects if plant is after other player.
// Reduced amount of times DropUnwanted is called. Now only calls it when needed.
// Improved CustomRunAway procedure. Now even more robust.
// Improved GoToBank procedure. Now even more robust.
Attachment 10239 non S.M.A.R.T. version.
Attachment 10240 S.M.A.R.T. version.
If You Use and Like This Script Please Rate This Thread.
If You have Used This Script Please Leave Comments.
Thanks everyone for your support.. :D
THIS GUY DID IT AGAIN DANG
How fast can you update a scripts PRISONER IS THE FASTES ON
I support you 100% Prisoner
[This is still with v1.10]
Simple Yew Cutter & Banker (Edgeville) V1.11s beta
Ran for: 40 Minutes and 17 Seconds
Loads Banked: 3
Yew Logs Banked: 84
You Started at Level 65 you are now at Level 66
You earned 14,700xp This session with 38,034xp to the next Leve
[Not that much Yews is not cause this scripts sucks but my woodcutting sucks this is the best script ]
i go to test v 1.12 beta i post a proggy later
EDIT: i vergot to post a proggy buy i have after running scar a broken axe
No, I loved your explination. Thanks.
To the other guy; Please do not say PriSoner is the fastest updater...I know I'v update all my scripts to the latest rev the day they come out, but that is not my point. The point is that maybe PriSoner updates every time he thinks of something to add, where as I or anyother scripters combind all these into (for me a weekly update). Also I doubt he can update faster than Wizzup? or some other admin. Although PriSoner is a good scripter in general :D.
awesome script, im almost 94 woodcutt :)
I'm usting atm..
except a proggy from me later ;)
I used it for 2 hours..
worked perfect;)
i cant give a proggy, because my pc chrashed :(
oh yea..
i found a little bug..
i used 2 axes
(one in inv and one wielded)
and it banked the one in inventory and said it was a random item
thats all i found :P
great script man..
it worked awsome..
fixed 2 frogs, 2 boxes, 1 sandwich lady and 1 certer;)
and 1 ent
did about 160 yews
I'm pleased you like it and that it ran well for you.. :D
As for the axe thing, it's by design.. you have no need to carry 2 axes.. the ent finder is superb and as long as you are running in low detail mode and 32 bit colour you should never break an axe.
got a 2 hour+ proggy, did 10 loads and ill be 94 wc soon.
PriSoner I think the findfight is lagging my script.
Idk why, all I got is this
SCAR Code:12: begin
WriteLn('Searching for fight');
if FindFight then
begin
Case Random(2) of
0: Runaway('s', true, 1, 15000 + random(5000));
1: Runaway('w', false, 1, 15000 + random(5000));
end;
end;
end;
And the Players lvl [8] is in the setup. I'm trying to figure it out but idk.
Also I somehow forgot (I use it a lot in my script), but does "(Random(10) > 3)" mean something will happen 30% of the time or 70% of the time? Oh and I might revert back to my ent finder, just cause last night I saw it in action (someone else was using my script), it I really liked it. It uses the regular SRL entfinder to actually find the ent, but then it does what I tell it to after that.
Yes this is a very good scripts and yes scripts lags a bit but still gets you much yews
Btw it got my wc to 60-66 [14k xp till 67]
It shouldn't have any negative impact at all, it affects nothing other than giving findfight a value that it needs.. I have however noticed a significant increase in CPU usage with the last version of my script. I will look into it further.Quote:
Originally Posted by osmm
If the statement was if (Random(10) > 3) then it would mean that it would happen 70% of the time.Quote:
Originally Posted by osmm
What you do after the SRL Entfinder has detected the presence of an ent is up to you. The most important bit is that the ent is detected in the first place and that is entirely done with the SRL entfinder. So to call it your entfinder would be somewhat misleading. It's still the SRL entfider but you could say that it's your EntResponder.. ;)Quote:
Originally Posted by osmm
It's certainly up there as a good one :) but i've had a 6+ hour one and a few 5 hour ones.. :D
I'm a bit concerned at the amount of loads you managed to bank at that level. I got 27 loads in less time at the same level.. Are you in a free world as i notice you didn't get any Birds Nests, I wonder if free/members world also affects the speed you can chop? Not to worry though I'm optimising the script all the time.. :cool:
As we speak I'm beavering away on the next version and it's a very big update with lots of optimisations, improvements and the inclusion of the much requested Multi-Player support. Watch This spot..
Thanks everyone for your support.. and keep posting those progress reports.
If You Use and Like This Script Please Rate This Thread.
If You have Used This Script Please Leave Comments.
yea im f2p....and i was getting loads pretty fast, but then a lot of more people came and it started slowing down.
got 94 wc :)
Yea I never called it mine. Actually I even have "SRL's EntFinder - 75% modifyed by me" or something like that. Also I found out that my ClicktoContinue thing was lagging it. (I added so when someone levels it will click to continue, instead of clicking on the tree to cut more).
When its click tree its laggy(tilting screen) and i stop script and its logged out!
################################################## ################
Simple Yew Cutter & Banker (Edgeville) V1.12s beta
Ran for: 1 Hours, 50 Minutes and 14 Seconds
Loads Banked: 4
Yew Logs Banked: 108
Random Event Items Banked: 4
You Started at Level 66 you are now at Level 67
You earned 18,900xp This session with 52,915xp to the next Level
Script Ended: CutDownTree: 2 Not Logged In. Lost Connection or Unsolveable Random?
################################################## ################
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
| Fights : 1 |
| Talks : 2 |
| Dwarfs : 1 |
| Old Men : 1 |
| Boxes Solved : 2 |
| Ents Found : 3 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
################################################## ################
Simple Yew Cutter & Banker (Edgeville) V1.12s beta
Ran for: 3 Hours, 2 Minutes and 1 Seconds
Loads Banked: 9
Yew Logs Banked: 250
Random Event Items Banked: 2
You Started at Level 67 you are still at Level 67
You earned 47,775xp This session with 940xp to the next Level
Script Ended: Could Not Find Both Yew Symbols (Function: FindBothYews)
################################################## ################
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
| SRL 4 Randoms Report |
| www.srl-forums.com |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs : 1 |
| Fights : 5 |
| Talks : 5 |
| Old Men : 3 |
| Sandwiches : 1 |
| Lamps Solved : 2 |
| Boxes Solved : 1 |
| Ents Found : 4 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
S.M.A.R.T is awesome!!:D
Get stuffed realrocker00... Go away and stop Spaming the forums with your sig!! :f:
Thanks for the Progress Reports piepolo Awesome..
I'm Beavering away on the next Multi Player Version... Major Improvements all round..
This is epic. With S.M.A.R.T it's 3 times as good. 45 minutes so far 4 loads!
I only had 1 problem. With the random of the guy that turns into a werewolf. the bot wouldn't click "Click to continue."
Current log.
################################################## ################
Simple Yew Cutter & Banker (Edgeville) V1.12s beta
Ran for: 44 Minutes and 12 Seconds
Loads Banked: 4
Yew Logs Banked: 107
Random Event Items Banked: 5
You Started at Level 72 you are still at Level 72
You earned 18,725xp This session with 74,468xp to the next Level
################################################## ################
There are many randoms that this closes on I think I have had 4 so far.
worked well but something is making the script lag VERY BADLY for me. idk someone above said it might possibly the "FindFight" portion of ur script. not too sure
ya every time it clicks on the yew it freezes then auto-logs off then gives me this error
[Runtime Error] : Exception: The handle is invalid.
in line 317
mike3667: That is very fast especially at level 72. The best I can do at level 93 is 1 load every 8 mins and thats when every condition is perfect.
freakymonkey: the Lag is nothing to do with FindFight. I don;t experience it and most people don't but it does appear to affect a significant few? so can i ask:
What speed/cpu is your machine?
What OS is installed? (Vists, XP, 98 etc)
Is SCAR Installed in your "Program Files" directory?
What version were you running V1.12 or V1.12s?