Player0 Still Active? no. earned: 0 XP. reason ended: MoveToCathYews: Could Not Find Shop.
happens everytime i try use it with SMART it checks stats invent etc then goes back to stats and logs out? using version 1.84
Printable View
Player0 Still Active? no. earned: 0 XP. reason ended: MoveToCathYews: Could Not Find Shop.
happens everytime i try use it with SMART it checks stats invent etc then goes back to stats and logs out? using version 1.84
I did.Quote:
Originally Posted by Shuttleu
EDIT. Don't know about others, but I do read first posts fully. Always.
################################################## #################
Ultra Cut n Bank V1.84
Final Report
Ran for: 2 Hours, 38 Minutes and 26 Seconds
Total Players: 1
Total Banks: 15
Total Yew Logs Banked: 417
Birds Nests (Seeds) Banked: 3
Total XP earned: 72,975
################################################## #################
Acctually cut 1.2k logs but stoped twice due to the cannot find shop symbol error and te scaperune island random. AWSOME SCRIPT KEEP IT UP :D
try it without smartQuote:
Originally Posted by ojkid
your one of the first people i know who has thenQuote:
Originally Posted by Cazabacca
anyway try and make sure you have the latest srl
preferably dev revision
~shut
Ultra Cut n Bank V1.84 Player Report for: zakowako0 Location: Edgeville Ran for: 1 Hours, 39 Minutes and 31 Seconds Loads Banked: 4 Yew Logs Banked: 107 Reason Player Ended: Maximum Time reached for this session... Changing Player. Player zakowako0 Started at Level 84 and is still at Level 84 You earned 18,725 xp
################################################## #################
Ultra Cut n Bank V1.83
Player Report for: Player 2
Location: Tree Gnome Stronghold - Magic
Ran for: 52 Seconds
Loads Banked: 0
Reason Player Ended: CheckForAllRandoms: Capt Arnav, unsolvable random.
Player 2 Started at Level 79 and is still at Level 79
You earned 0 xp This session with 170,418 xp to the next Level
Overall Running Time: 1 Minutes and 11 Seconds
################################################## #################
################################################## #################
Ultra Cut n Bank V1.83
Final Report
Ran for: 1 Minutes and 11 Seconds
Total Players: 3
Total Banks: 0
Total XP earned: 0
################################################## #################
Player0 Still Active? no. earned: 0 XP. reason ended:
Player1 Still Active? no. earned: 0 XP. reason ended:
Player2 Still Active? no. earned: 0 XP. reason ended: CheckForAllRandoms: Capt Arnav, unsolvable random.
--- there wasnt a random i dont understand why it found this one?
i have tried without smart it works ok for 2 and half hours then says stuck at cutting yews or cant find bank simbol but i really want with smart
################################################## #################
Ultra Cut n Bank V1.84
Final Report
Ran for: 2 Hours, 52 Minutes and 28 Seconds
Total Players: 1
Total Banks: 18
Total Yew Logs Banked: 503
Birds Nests (Seeds) Banked: 1
Total XP earned: 92,925
################################################## #################
Player0 Still Active? no. earned: 92925 XP. reason ended: BankAtCatherby: Could Not Find Shop.
Just wondering if this script is outdated because of todays update.....my guy cuts the logs and fills up the inventory then goes close to edgys bank and logs out....and answers?
Probably because of Flag update go to this thread http://www.villavu.com/forum/showthread.php?t=45818Quote:
Originally Posted by faster789
Line 111: [Error] (18469:1): Unknown identifier 'UseAutoResponder' in script C:\Program Files (x86)\SCAR 3.20\includes\SRL/SRL.scar
I downloaded your includes but still get this error idk why.
hey i need lil help plz idk wat to do.
Failed when compiling
Line 1: [Error] (1:1): Unexpected end of file in script C:\Program Files\SCAR 3.20\includes\SRL\SRL.scar
Pm if u wanna help wit teamview
Line 108: [Error] (17081:1): Unknown identifier 'UseAutoResponder' in script C:\Program Files\SCAR 3.20\includes\SRL/SRL.scar
go to srl.scar and delete that line that your getting the error on
it should say UseAutoResponder on that line
save it and try again
~shut
ok so...I've tried everything.. I keep on getting the same
error Line 114: [Error] (18495:1): Unknown identifier 'UseAutoResponder' in script C:\Program Files\SCAR 3.20d\includes\SRL/SRL.scar.
No matter what i do; I've uninstalled SRL and Scar and redownloaded. I Installed the installer thing Like it says on the 1st page cause i actually read it and I still get that error. So Shut I would really like some help cause I used to use this script (the older version) and i loved it and I wanna use this one too but this error is preventing me from using it.
disappointed to see nobody has beaten my record proggy :(
look up a few postsQuote:
Originally Posted by spart300
http://villavu.com/forum/showthread....145#post580145
~shut
ok so i looked up all 54 pages and i only saw bout..3 similiar cases so i went to srl.scar and found that error on the line. it says:
UseAutoResponder := True;
So..I deleted the entire line and tried the script and i got this error:
Line 1472: [Error] (21979:31): Unknown identifier 'GetTalkingNPCName' in script C:\Documents and Settings\Owner\My Documents\Scripts\UltraCutnBankLiteV1.83.scar
So, I exited out of everything and re-opened the autorespond installer and it says both files were downloaded to locations (paraphrasing here) and I look at srl.scar and it's not there at all. The autoresponder isn't there even though i just ran the download script. So, I ran it again and put in line 114 UseAutoResponder := True; and i'm still getting the same error so Shut as you can see I'm having quite the problem/hassle and I don't know what i'm doing wrong haha..
Edit: I'm using Scar 3.20d with revision 33..could this be the problem?..
ahhh... yesQuote:
Originally Posted by spart300
that reminds me
i need to update for rev# 33
~shut
EDIT: released a temporary fix
you can download it from the first post
1. got stuck on way back to bank (edgevil)
2. lags a little bit
3. like you posted, I had to remove UserRespond from my srl.scar file
4. ill be testing the script more
5. Great Job!
ok V1.85 has been released
~shut
V1.85 Added a IRC idle thing by Harry.
^^ really fixed a lot of bugs in that update :P
i didnt say i fixed any bugs ;)
~shut
EDIT: Myles madness and jethrox are the only ones that have run the script soo far
man i dont kno how to start it i got it workin but its like dont open runescape then wen i click on this site it like wont let me do anything its takes full control of the mouse Lol
so like wat should i open first befor pressin play xD
i would like to run this script if u want ur more then welcome to hope on my teamview and show me how set it up if u have time
ok well pm me your team viewer id and i shall helpQuote:
Originally Posted by deadzone
~shut
ran the script. and it didnt find the store.. all 8 tmes i tries :S... to lazy to fix ;P
I tried to convert this to work with smart and failed miserably... any chance you could get it working?
im back im going to go and give this a try now, expect a proggy soon.
if your using it at catherby then you will need to update a file
goto srl/misc/newautocolor.scar
and line 50 should have something like
ref_General_Store =
change the number to 2847940
~shut
hey, i've been trying to figure this out myself.. but i haven't used scar in a long time and i dont remember it all :P
when i try to run this script i get this:
Failed when compiling
Include file C:\Program Files\SCAR 3.20\includes\SRL\SRL.scar does not exist.
Include file C:\Program Files\SCAR 3.20\includes\SRL\SRL\skill\WoodCutting.scar does not exist.
Include file C:\Program Files\SCAR 3.20\includes\srl\srl\misc\users.scar does not exist.
Include file C:\Program Files\SCAR 3.20\includes\srl\srl\misc\NewAutocolor.scar does not exist.
i've never gotten anything like this before :S what to do?
- Update SRL?Quote:
Originally Posted by basse
right well i hardly ever play runescape anymore which means that i cant update this script any more
so basically what im saying is that i want to find someone who will carry on with this script and will continue to update it
if you are interested please shoot me a PM
~shut
i got this...
Line 125: [Error] (20056:1): Unknown identifier 'UseAutoResponder' in script
this might help tho i went to
SCAR 3.21>include>srl>srl>core
then the file for the AutoResponder had a "!"
what can i do?
Go to this thread I made http://villavu.com/forum/showthread.php?t=46239Quote:
Originally Posted by jayzarks95
Quote:
Originally Posted by ZephyrsFury
Thx man, awesome script!
this script is really good, would be really awesome if someone skilled took over the updating as shuttleu asked :)
Read the first page, please. :) Right now I have the scripting competition to work on with EC!, and we have another script we're working on, but I'll try to make time for this, as I loved it back in the day. :)
Could not find any axes, logging out player *****
I have 2 axes man, one in hand and other in backpack...how is possible ?? O.o
Please Halp me xD
Im getting the same problem with the axe.... and i wish it was setup to use smart... I dont think I will use it if i cant use my mouse to do other things. But wow... looks like a super amazing script with all the bells and wistles.
can anyone still use this script? cus right now no matter what i do it cant find the axe