[SRL] AK Smelter

Quote:

---

Originally Posted by Killer2OOO

If you are going to update it there is a problem with it not always doing full loads. It will do like 4 bars then go back to bank before it is done smelting.

|_Narcle's AK Smelter_| 5h:12m:25s |
| XP Gained: 3735714 | XP/Hour: 718407|
| Bars Smelted: 24441 | C-balls: 0 |

I do not have 24k bars smelted, but because it doesn't do full loads (and maybe doesn't count correctly) It says I have many more than I actually do.

EDIT: Ran it last night, I have now made 10k bars in the last 3 days! Great script

|_Narcle's AK Smelter_| 7h:45m:17s |
| XP Gained: 11736126 | XP/Hour: 1514339|
| Bars Smelted: 51030 | C-balls: 0 |
Failed to get to furnace, ****is now inactive.

---

50k..?

|_Narcle's AK Smelter_| 5h:0m:51s |
| XP Gained: 2731823 | XP/Hour: 546365|
| Bars Smelted: 19521 | C-balls: 0 |

hey i found that it takes about one minute to click the furnace and smelt bars.
it runs quite slow after RS has updated

Quote:

---

Originally Posted by Niixu

50k..?

---

It doesn't count correctly, as I was saying before.

EDIT: Now once it gets to the bank it clicks to far and the flag stays to it waits for like 30 seconds before it banks.

BTW, Any chance of getting an update? Please?

EDIT 2:
|_Narcle's AK Smelter_| 24h:11m:43s |
| XP Gained: 21729773 | XP/Hour: 898543|
| Bars Smelted: 64714 | C-balls: 0 |
(My interent disconnected, grr)

Walking is have some small problems, it doesn't always smith the first time it goes to the furnace, it sits there and then tries over. You can see if you test it again.

great script, kinds slow though... it will sit in the bank or at the furnace for a while before it starts to do anything..

|_Narcle's AK Smelter_| 0h:47m:19s |
| XP Gained: 15751 | XP/Hour: 20108 |
| Bars Smelted: 459 | C-balls: 0 |

I would of done it for longer but I had to keep stopping it because of some timing problems.

i really hope narcle is still working on this script...

It had too much pauses here and there but a little tweaking and it became flawless :)
smelted 1.5k bronze bars and almost 2k steel bars now ;) If Narcle gives me permission, I'll post my modded version.

|_Narcle's AK Smelter_| 0h:46m:53s |
| XP Gained: 25670 | XP/Hour: 33483 |
| Bars Smelted: 684 | C-balls: 0 |

Im smelting steel bars.

Quote:

---

Originally Posted by Killer2OOO

|_Narcle's AK Smelter_| 10h:28m:39s |
| XP Gained: 173558 | XP/Hour: 16582 |
| Bars Smelted: 2745 | C-balls: 0 |

|_Narcle's AK Smelter_| 1h:19m:37s |
| XP Gained: 106310 | XP/Hour: 80742 |
| Bars Smelted: 2025 | C-balls: 0 |

|_Narcle's AK Smelter_| 21h:42m:23s |
| XP Gained: 27246024 | XP/Hour: 1255577|
| Bars Smelted: 86978 | C-balls: 0 |

|_Narcle's AK Smelter_| 11h:53m:47s |
| XP Gained: 415959 | XP/Hour: 35004 |
| Bars Smelted: 4807 | C-balls: 0 |

The only time it ever stops is when I loose my internet connection or sometimes it says failed to find furnace even though it is right next to it.

So far I have done just about 10k steel bars with this script in just under 3 days. It is great!

BTW: Is there a way you can turn off character switching because I am only using one and it keeps on logging out every 15 mins to switch.

---

wow... how did you smelt so many bars?

on its first break

|_Narcle's AK Smelter_| 0h:10m:51s |
| XP Gained: 788 | XP/Hour: 4728 |
| Bars Smelted: 45 | C-balls: 0 |

Leaving on all night

|_Narcle's AK Smelter_| 3h:25m:56s |
| XP Gained: 694248 | XP/Hour: 203195 |
| Bars Smelted: 6633 | C-balls: 0 |


I think there is somthing wrong with the bar counter because I only had 1000 bars to smelt :\ BUT IT DID SMELT ALL OF THEM SO IM HAPPY....well except for one bar but I guess I can do that one bar myself ugggh lol lvled 4 times 39 to 43

Quote:

---

Originally Posted by destroyface

on its first break

|_Narcle's AK Smelter_| 0h:10m:51s |
| XP Gained: 788 | XP/Hour: 4728 |
| Bars Smelted: 45 | C-balls: 0 |

Leaving on all night

|_Narcle's AK Smelter_| 3h:25m:56s |
| XP Gained: 694248 | XP/Hour: 203195 |
| Bars Smelted: 6633 | C-balls: 0 |


I think there is somthing wrong with the bar counter because I only had 1000 bars to smelt :\ BUT IT DID SMELT ALL OF THEM SO IM HAPPY....well except for one bar but I guess I can do that one bar myself ugggh lol lvled 4 times 39 to 43

---

Yeah, there's a bug with the bar counter.
And another one when not finding enough for 1 entire load of ore to smelt, not sure about this one though.

|_Narcle's AK Smelter_| 0h:9m:9s |
| XP Gained: 718 | XP/Hour: 4787 |
| Bars Smelted: 41 | C-balls: 0 |


My username got a space ... can't relogin itself.

There's some running that's inefficient. It's when my character comes back from the furnace to the bank. he reaches the bank, right in front of the bankers, then walks out of the bank and back again. This second time is when he actually opens the bank.

(sorry if it sounds confusing...).

Line 297: [Error] (17160:6): Unknown identifier 'Amount' in script C:\Documents and Settings\User\Local Settings\Temporary Internet Files\Content.IE5\ZFL78GK7\Narcles%20AK%20Smelter% 20v0.9.10[1].scar
Failed when compiling
tahts wat i keep gettin idk how to fix it so can u help me ?

It's most likely Outdated or something's wrong with your SRL.
Let this thread die. Don't gravedig, please. This thread is nearly 2 months old. It'll be back up when it's updated. In the meantime use xCan's Smither.
~xSpazyKlown0~

This is the message i get when i try to run it;

Line 297: [Error] (20223:6): Unknown identifier 'Amount' in script

what do i need to do to this to make it smelt my ores into steel bars?

Quote:

---

function HighestInvAmount: integer;
var
i, A: integer;
begin
For i := 1 to 28 do
If ExistsItem(i) then
begin
A := Amount('inv', i);
If A > Result then
Result := A;
end;
end;

---

Quote:

---

Originally Posted by Abbott

This is the message i get when i try to run it;

Line 297: [Error] (20223:6): Unknown identifier 'Amount' in script

what do i need to do to this to make it smelt my ores into steel bars?

---

Probably because the script is old.

Please stop using red font or I will be forced to come and eat your penis off.

Please update this!

Updated.

Download latest Dev SVN - updated the bitmaps

Counting is off the bitmaps might need an update
Counted wrong, l0wp00n4 is now inactive.
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
NextPlayer

Quote:

---

Originally Posted by jakeyboy29

Counting is off the bitmaps might need an update
Counted wrong, l0wp00n4 is now inactive.
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
NextPlayer

---

Did u download the latest Dev svn? I updated the bitmaps in there.

How do you add more players?
It runs perfectly with 1 player but when i try to add more i get this error.

Failed when compiling
Line 103: [Error] (20795:1): Identifier expected in script C:\Program Files\SCAR 3.21\Scripts\

I get this error when I try to update SRL.

Code:

---

In directory 'C:\Documents and Settings\user\Desktop\SRL\Scripting Tools'
Error processing command 'readonly' in 'C:\Documents and Settings\user\Desktop\SRL\Scripting Tools'
Can't set file 'C:\Documents and Settings\user\Desktop\SRL\Scripting Tools\.svn\text-base\SCAR Mass Bitmap Convertor.exe.svn-base'
read-only: The system cannot find the file specified.

---

Is that something wrong with my pc or is there something wrong in the dev srl?

Something with the svn it looks like. Try from a blank folder and update.

Quote:

---

Originally Posted by kdj55

How do you add more players?
It runs perfectly with 1 player but when i try to add more i get this error.

Failed when compiling
Line 103: [Error] (20795:1): Identifier expected in script C:\Program Files\SCAR 3.21\Scripts\

---

Did you set the players etc.? And identifier weird... Need little more info to deduce it.

yea, I just copied the 1st player setup and pasted it under and filled it out. I changed all the numbers that needed to be changed, but that error always happens it says something is wrong with the line of the first var..

Heres one of my 1 player proggies.

|_Narcle's AK Smelter_| 1h:14m:15s |
| XP Gained: 11458 | Bars Smelted: 840 | C-balls: 0 |
| XP Gained: 0 | Bars Smelted: 0 | C-balls: 0 |
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: True);
I7ickpleaser

|_Narcle's AK Smelter_| 1h:16m:34s |
| XP Gained: 18662 | Bars Smelted: 1162 | C-balls: 0 |
| XP Gained: 0 | Bars Smelted: 0 | C-balls: 0 |

The bar counting is messed up

Counting is off the bitmaps might need an update
Counted wrong, XXXX is now inactive.
NextPlayer
SwitchToPlayer(PlayerNo: 0, Active: False);
Player is not Active...
NextPlayer

I have latest opendev srl revision

I'll go through it see if the bitmaps are messed up or not... Might switch to DDTM's for ores/bars I'm thinking.

Looking at the number of reports about bitmaps problem, you should try ;)

Greetings

Running it right now. But I have a question. Whats the difference between steeltoball and cballs? I thought steeltoball will make a steel bar and make it cannonball but it withdraws all iron ores and gives bad bitmap error so now I am just making steel bars at the moment.

Edit: Can't find the bankers in the bank :( It is searching all gray colors which includes the tables, chair, doors etc so its very slow.

Quote:

---

Originally Posted by FEAR

Running it right now. But I have a question. Whats the difference between steeltoball and cballs? I thought steeltoball will make a steel bar and make it cannonball but it withdraws all iron ores and gives bad bitmap error so now I am just making steel bars at the moment.

Edit: Can't find the bankers in the bank :( It is searching all gray colors which includes the tables, chair, doors etc so its very slow.

---

Steeltoball is "Steel bars to cannonballs". And the banking is weird btw that's SRL's banking not mine. I might try regular banking or something.

Any who I'm working on the bitmap problem. I'm working on a new system that I hope will work good. If all goes correctly I won't need to update the items anymore as it will auto update itself when you run the script using TPA and colors for item searching.

How would you set up multiplayer for this script?

You just need to add players to DeclarePlayers it should work for Multi-players. I'll be testing it to make sure it works as well.

Narcle: The banking seems be a problem in SRL (I believe someone already mentioned this problem about the script) Easy fix, in Bank.scar in the OpenFastBank function under 'akb': change the tol from 25 down to 5...

Another thing, I think someone also mentioned this problem too, sometimes the script does not make it to the furnace... I have a fix which might work but I don't know, its old code so it might not be too reliable... I'll test it and send it to you if it works

Other than that the script is beautiful :p

Well I did a weird/new thing awhile ago to walk to the furnace... It hasn't failed me yet.

E: should see the new changes... I just I wish I could get a more permanent auto "Item" updater. Right now I have it find the color of the ore when its in your invy and then remembers it. I'm thinking on a full updater though where it records the new data every time it starts up - but its hard finding a efficient way.

Turns out my bank fix doesn't work too great lol... I'll play around with it, worse comes to worse make my own function... :p

Update and some major changes.

My original plan was to use bitmaps via SRL include but they constantly were unreliable. So I switched back to what I had it at last time via TPA search but now a bit different.

With the new setup it actually records the item TPAs on-the-fly so its never wrong. The key is to make sure it takes out the correct main ore, records it and then records the bars correctly after the first pass. After that its good to go. If your smelting different things it'll have to record it for each different ore/bar but after one pass on all of them it's set.

You'll see something similar to this in the debug box when it records the items:

Code:

---

ItemArr[1] := InvItem(169, 31, 28, 1449266);
ItemArr[12] := InvItem(62, 27, 21, 3618874);

---

Multi-player -
I added forms for optional use in const on top. [UseForm = true/false] The default is false so if you want to use form just set it to true.

I wasn't able to test the multi-player in great length unfortunately so I'll have to wait for some feedback if anything needs to be changed.

Line 866: [Error] (23900:3): Assignment expected in script
Whats wrong..?

Quote:

---

Originally Posted by kdj55

Line 866: [Error] (23900:3): Assignment expected in script
Whats wrong..?

---

Variable needs Assignment. Something like this was the error (I have the script on my laptop but im on my home comp atm)

SCAR Code:

T = xyz;

// Needs to be changed to this:

  T := xyz;

I believe there's two of them...

Ah crap did I upload wrong one? I'll check... >.<

Edit:
Yep my bad, fixed.

Quote:

---

Originally Posted by Narcle

Ah crap did I upload wrong one? I'll check... >.<

Edit:
Yep my bad, fixed.

---

Ok thanks for updating the script :) But You didn't answer the question before. You told me steeltoball makes cannonballs from steel bars. But what does cballs do then?

Steeltoball takes bars to make balls?

And cballs takes ore to make bars and then makes balls?

Quote:

---

Originally Posted by rogeruk

Steeltoball takes bars to make balls?

And cballs takes ore to make bars and then makes balls?

---

yup