ZephyrsFury's computer must be busted or something because hes not posting or anything!
Printable View
ZephyrsFury's computer must be busted or something because hes not posting or anything!
Or he's simply busy with something? :P
Will post a proggy, this little script got me 60 - 80 woodcutting in about 2 weeks...And of course a handful of cash (6 mill)!!!
I'm still here, just not as much anymore.Quote:
Originally Posted by nahiyan
Thank all for proggies, comments and suggestions. It also good to see some of you helping each other out. :)
For those that didn't know, yes the script will tele you to Lumby if it gets lost then it'll try and walk back and continue. This might not always work. Erm... yeah I've heard suggestions about incorporating a Glory amulet feature before, just never got around to looking at it properly. I make later when I'm a little less preoccupied.
Thanks again. :)
[ Total Time Running: 5 Hours, 44 Minutes and 49 Seconds ]
[ Total Loads Done: 45 ]
[ Yews Chopped and Banked: 1258 ]
[ Chopping Rate: 219 Logs/Hr ]
[ Total Experience Gained: 220150 ]
[ Experience Rate: 38307 Exp/Hr ]
[ Woodcutting Levels Gained: 0 ]
[ WalkBacks: 0 ]
[ World Switches: 3 ]
[ Auto Responses: 2 ]
[ Current World: 60 ]
[----------------------------------------------------------------------------------------]
[ | Nick | Act | Loc | Wc Lvl | Axe | Loads | Logs | Time ]
[ o | | F | Cap'n Arnav | 94 | Dragon | 45 | 1258 | 343 min ]
[----------------------------------------------------------------------------------------]
shoulda been posting more proggies, I've gotten nearly 20k yew logs from this script.
Ugh why doesn't it enter my bank pin!?!? :'(
I'm gonna re-download it!
im getting some problems, sometimes the script goes beside a yew then it starts cutting the normal trees, also it walks to the front of the bank then it stops
day, just fyi the script does that by accident, but just to give you a feel.
[----------------------------------------------------------------------------------------]
[ August 300, 2009, 06:07:48 AM ]
[----------------------------------------------------------------------------------------]
[ >>> Zephyr's Draynor Yew Gatherer Ver 2.4 <<< ]
[----------------------------------------------------------------------------------------]
[ Total Time Running: 8 Hours, 2 Minutes and 5 Seconds ]
[ Total Loads Done: 49 ]
[ Yews Chopped and Banked: 1369 ]
[ Chopping Rate: 170 Logs/Hr ]
[ Total Experience Gained: 239575 ]
[ Experience Rate: 29817 Exp/Hr ]
[ Woodcutting Levels Gained: 0 ]
[ WalkBacks: 4 ]
[ World Switches: 2 ]
[ Auto Responses: 7 ]
[ Current World: 23 ]
[----------------------------------------------------------------------------------------]
[ | Nick | Act | Loc | Wc Lvl | Axe | Loads | Logs | Time ]
[ o | | T | To Bank | 95 | Dragon | 49 | 1369 | 461 min ]
[----------------------------------------------------------------------------------------]
Out of that I get like 20 oak/normal logs. And sometimes the script bugs if you have stopped and restarted the script without stopping scar. Exit scar, and reload the entire thing. This script is wonderful, so just keep trying and it'll start working right. The bank-pin bug I had too, I just re-downloaded and it worked fine.
Apparently Jagex changed the pin screen yet again....
i was just running it literally 20 minutes ago and it was working fine on the pin. Hmm.
Doesnt ur inventory get full when u afk?, cus for me it doesnt deposit the normal logs, it just stays in my inventory. oh yea and sometimes it gets lost right beside a yewQuote:
Originally Posted by IPwnz
I had the problem where it would start the script, do one thing and then stop.
For anyone else who is having this problem this is how i fixed it:
1. re download it
2. There is no 2...
3. If there was no two why would there be a three?
4. Run the script
5. ummm.... have fun?
Zephyr dunno why but the script gets lost alot, have you thought about using the cabbage field teleport instead of home yeleport?
Well the script does have 1337 walking :pQuote:
Originally Posted by day416
i dont know what that is, but cabbage field teleport would be better than home teleport cus its infinite, and you dont have to wait for it
Maybe, but that means I have to go about opening gates and stuff.Quote:
Originally Posted by day416
hey does this script still work with the new graphics update?
Doubt it, the whole mini map looks in runescape looks like crap, and SRL walking/auto color has been screwed up at the moment as a result.Quote:
Originally Posted by yubinator
aw yea, i tried using a willow script and it hovered on the willows, but didn't click and it went over all the willows and then just stopped. :( does this mean nearly all of the scripts have to be updated?
Well if the colours have changed then Yes, i havent been on Runescape to see the update so i don't know.
It could be the uptext.. Did you have the dev svn? Did you get the pre-release of scar?
um well im really new at this so im unfamiliar with the terminology. :(
i don't know what you mean by uptext and the dev svn. haha sorry to be such a 'noob'
Uptext is the what we call the text that appears in the top left corner of the RS screen when you hover you mouse over something that you can click (ie. Walk here or Chop Yew tree). The latest update broken SRL/SCAR's uptext finder. I'm not sure if its been fixed yet but your best bet would be too try using the SRL Open Dev version which would be where the fix is if one exists. Read about how to get SRL Open Dev here: http://www.villavu.com/wiki/index.ph...Setting_up_SRLQuote:
Originally Posted by yubinator
i know this isn't your scripts fault, but just thought i ld let you know that it can find the right road color anymore because everything is so closely colored. other than that its almost working again.
Yeah thanks. I can confirm that this script does not work atm. Sorry guys.Quote:
Originally Posted by xSaintias
Well, i wish you fix it when you have time for it, because this is the best script i've probably ever used for woodcutting :)Quote:
Originally Posted by ZephyrsFury
OMG is SRL going down? Can I help in updating pictures or anything?
calm down!Quote:
Originally Posted by nahiyan
its not even close to going down....
everyones updating there scripts for the new update.
Zephyr WHERE ARE YOU???????? haha i hope you have enough time to work on your highly appreciated works.
Yes. We would all appreciate it. The most human-like woodcutting script I have ever used!
So it doesn't work huh?
I tried it myself.
Woodcutting Level is 0
Location: Lost - Too Low WC Level
From my experience, even a new account would be Level 1 in every skill when first created. That's too bad...
Hmm funny you should mention this script. I just did a quick rewrite yesterday to replace the walking with Reflection. If anyone's interested I'll finish that up quickly and release a new version..
This was one of the best color scripts I've ever tried. Kinda sad that it would have to go reflection, but I'm sure it will be great regardless.
DO IT!!! I will rape it once again :D or you could just fix your autocolors.Quote:
Originally Posted by ZephyrsFury
Tarajunky used my script! :OQuote:
Originally Posted by tarajunky
:p
Yeah I've been pretty busy so this script's been neglected however I needed it quickly the other day so I quickly changed the walking. Idk maybe I'll feel like it one day and attempt to get the colour walking to work again. ;)
Anyway I think the hooks died or something cos it doesn't want to work atm..
:( it doesnt even log me in
it just chills at the login screen, either trying to login or switch worlds, but doesnt do any thing :\
the script is about a month or two outdated, ive been waiting on zeph to update but it doesn't seem likely. i don't think there are any working yew choppers out there currently but correct me if i am wrong anyone
can we get this up and running again? i bot alot and ill post every proggie i get! :D
He put a version up. Try it out guys. First page.
Edit: ZEPHYR, it logs me out and says:
Current World: ***
Woodcutting Level is 0
Your Woodcutting Level is too low for cutting Yews!
Screenshot saved: C:\DOCUME~1\OWNER~1.*****\LOCALS~1\Temp\Too Low WC Level ~ 17-10-09 ~ 03.48.14 PM.bmp
Location: Lost - Too Low WC Level
I have 97 woodcutting on the character tested in question
Woodcutting Level is 0
Your Woodcutting Level is too low for cutting Yews!
Screenshot saved: C:\Users\Rollmann\AppData\Local\Temp\Too Low WC Level ~ 17-10-09 ~ 08.38.37 PM.bmp
Location: Lost - Too Low WC Level
[----------------------------------------------------------------------------------------]
[ October 177, 2009, 08:38:41 PM ]
[----------------------------------------------------------------------------------------]
[ >>> Zephyr's Draynor Yew Gatherer Ver 2.4 <<< ]
[----------------------------------------------------------------------------------------]
[ Total Time Running: 1 Minutes and 1 Seconds ]
[ Total Loads Done: 0 ]
[ Yews Chopped and Banked: 0 ]
[ Chopping Rate: 0 Logs/Hr ]
[ Total Experience Gained: 0 ]
[ Experience Rate: 0 Exp/Hr ]
[ Woodcutting Levels Gained: 0 ]
[ WalkBacks: 0 ]
[ World Switches: 1 ]
[ Auto Responses: 0 ]
[ Current World: 123 ]
[----------------------------------------------------------------------------------------]
[ | Nick | Act | Loc | Wc Lvl | Axe | Loads | Logs | Time ]
[ o | hats | F | Lost - Too Low WC Level | 0 | | 0 | 0 | 0 min ]
[----------------------------------------------------------------------------------------]
Thanks for using Zephyr's Draynor Yew Gatherer...
Successfully executed
same here :(
his wcing lvl was 91
I haven't put any new version up yet.. I was just thinking about it. My current version doesn't work 100% and I"m just a bit too busy. SorryQuote:
Originally Posted by IPwnz
I have a problem with the script, whn i start it it works fine, but when it checks my Wc lvl it stops, My Wc lvl is 81 so i don't understand what is the problem, This is my log: As you can see it says "too low Wc lvl, wc lvl 0"
._________.
\____ \ __
/ / | | ____
/ / _____ ._______ | |____.___ ___.____\ /______
/ / / ___ \ ___ \ _ \ \/ / _ \/ ____/
./ /__\ ____/| ___/ | | |\ /| | \_/\____ \
\_________\______\| | |__| |__| \ / |__| /______/
|___| Ver 2.4 /__/ Draynor Yew Gatherer
SRL Compiled in 31 msec
SMART Initialized.
Loaded: Server 1, Members: False, Signed: True, Super Detail: False.
World List Retrieved: Worlds: 162
Switching Worlds...
Going to World 35
World: 35, Players: 449, Members: False, PvP: False
Time Per Tree on this world is 107 seconds.
******
Creating the NickTPA.
Current World: 35
Woodcutting Level is 0
Your Woodcutting Level is too low for cutting Yews!
Screenshot saved: C:\Users\Håvard\Documents\Too Low WC Level ~ 03-11-09 ~ 10.02.13 PM.bmp
Location: Lost - Too Low WC Level
[----------------------------------------------------------------------------------------]
[ November 3th, 2009, 10:02:17 PM ]
[----------------------------------------------------------------------------------------]
[ >>> Zephyr's Draynor Yew Gatherer Ver 2.4 <<< ]
[----------------------------------------------------------------------------------------]
[ Total Time Running: 53 Seconds ]
[ Total Loads Done: 0 ]
[ Yews Chopped and Banked: 0 ]
[ Chopping Rate: 0 Logs/Hr ]
[ Total Experience Gained: 0 ]
[ Experience Rate: 0 Exp/Hr ]
[ Woodcutting Levels Gained: 0 ]
[ WalkBacks: 0 ]
[ World Switches: 1 ]
[ Auto Responses: 0 ]
[ Current World: 35 ]
[----------------------------------------------------------------------------------------]
[ | Nick | Act | Loc | Wc Lvl | Axe | Loads | Logs | Time ]
[ o | rexy | F | Lost - Too Low WC Level | 0 | | 0 | 0 | 0 min ]
[----------------------------------------------------------------------------------------]
Thanks for using Zephyr's Draynor Yew Gatherer...
Successfully executed