[Simba/SCAR] Coh3n's Anywhere PowerChopper

Printable View

Show 40 post(s) from this thread on one page

10-07-2009, 12:13 AM
mario97000

do you have a non smart Version of this it laggs way to much with smart

edit: thanks a lot :)
10-07-2009, 03:40 AM
Coh3n

Quote:

Originally Posted by mario97000

do you have a non smart Version of this it laggs way to much with smart

I'll upload one right now.
10-07-2009, 09:12 AM
rollin340

[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 42 Minutes and 39 Seconds ]
[ Loads Done: 10 ]
[ Logs Chopped: 270 ]
[ Levels Gained: 1 ]
[ Exp Gained: 18225 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
All logs dropped, starting to cut again...
Couldn't find trees, logging out.
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **

It didn't wander off.
It just decided to stop.
How did it not find the tree. xD

And darn the preset scripts, it doesn't always solve those random events.
It says it's solved, but you are still there! xD
10-07-2009, 08:43 PM
Coh3n

Hmm it's possible you lost connection, and when the new screen popped up, the script was still looking for trees.
10-08-2009, 11:48 AM
klit rs

Thanks man :)

[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 44 Minutes and 21 Seconds ]
[ Loads Done: 28 ]
[ Logs Chopped: 784 ]
[ Levels Gained: 1 ]
[ Exp Gained: 52920 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
10-08-2009, 07:06 PM
Coh3n

Quote:

Originally Posted by klit rs

Thanks man :)

Not a problem, glad it works for you! :) Just wondering, but what's "Klit RS"? Or is it just a joke? Lol.
10-08-2009, 08:04 PM
rollin340

All in all, it's a neat one.
Loses its value once you reach Level 60, but darn good to get there.

Great Willow-ing tool.
10-09-2009, 06:02 PM
Coh3n

Just so you guys know, I didn't update anything, I just re uploaded the current version as it didn't appear as an attachment for some reason. Thanks,

Coh3n
10-09-2009, 11:11 PM
moody

gj

great bot works awesome only question is how would i change it from dropping logs to bank them. since i dont know how to script do you think you could tell me what to type and where?
10-09-2009, 11:14 PM
Bionicle

Quote:

Originally Posted by moody

great bot works awesome only question is how would i change it from dropping logs to bank them. since i dont know how to script do you think you could tell me what to type and where?

nearly impossible with your level of scripting knowledge (no offence ment :p) you would need to add a bunch of new procedures/functions and it wouldnt be an 'Anywhere PowerChopper' anymore, because you could only make it bank at one bank. It would take quite a while to make this script a banking script :p sorry.
10-10-2009, 02:06 AM
Tniffoc

Quote:

Originally Posted by moody

great bot works awesome only question is how would i change it from dropping logs to bank them. since i dont know how to script do you think you could tell me what to type and where?

Now that you're a junior member, you can access new scripts in the Junior Members Section. Some of these may be able to bank. Still, my best advice is to learn to make your own script. You won't be sorry (trust me ;) )
10-10-2009, 02:18 AM
rollin340

But trust me, making a Banking script is really complicated.
You have to look for a Symbol, a particular guy, Bank all items, walk back and repeat.

The whole procedure can get messy if you aren't well knowledgeable in SCar and SRL scripting.

Best to start out small by making Wood/Fish/Mine Scripts.
10-10-2009, 04:07 AM
Coh3n

Quote:

Originally Posted by bionicle1800

nearly impossible with your level of scripting knowledge (no offence ment :p) you would need to add a bunch of new procedures/functions and it wouldnt be an 'Anywhere PowerChopper' anymore, because you could only make it bank at one bank. It would take quite a while to make this script a banking script :p sorry.

Lol, I said almost the exact same thing to him on MSN. :p

Quote:

Originally Posted by Tniffoc

Now that you're a junior member, you can access new scripts in the Junior Members Section. Some of these may be able to bank. Still, my best advice is to learn to make your own script. You won't be sorry (trust me ;) )

You really wont! Learning SCAR made me eager to learn other programming languages, and now I want to be a computer engineer.

Quote:

Originally Posted by rollin340

But trust me, making a Banking script is really complicated.
You have to look for a Symbol, a particular guy, Bank all items, walk back and repeat.

The whole procedure can get messy if you aren't well knowledgeable in SCar and SRL scripting.

Best to start out small by making Wood/Fish/Mine Scripts.

There's more than just that my man. And yes, it would be smart to start with a power skiller. :)
10-10-2009, 01:47 PM
JoshsPC

Is this still alive?
If it is awesome ill place a proggy up soon.

JoshsPC
10-10-2009, 03:39 PM
Coh3n

Quote:

Originally Posted by JoshsPC

Is this still alive?
If it is awesome ill place a proggy up soon.

JoshsPC

Of course it is! Look at the dates of the last few posts... :p

SCAR Code:
if (Length(TPA) < 5) then
  begin
    //Writeln('Length inside box: ' + IntToStr(Length(TPA)));
    Result := True;
  end;
inside Cut_Tree Down ->
SCAR Code:
if (Length(TPA) < 5) then
    Result := True;
inside of cut_ChopTrees near the end
SCAR Code:
end else
      
      begin
        //SRL_Warn('Cut_ChopTrees', 'Error Finding Tree Uptext. ', warn_AllVersions);
        MakeCompass('E');
      end;
->
SCAR Code:
end else
        MakeCompass('E');
There is tons of more occurrences of this, Does not effect anything so there is no need to fix it. :) Just felt like point that out for the next script you decide to do. :p

Other then that i see no problems. This script is well written, Good Job.

http://img82.imageshack.us/img82/623...ofapproval.jpg
Lol'd

10-11-2009, 02:24 PM
Coh3n

Haha nice seal of approval. ;) And yeah I know I have those needless being..end nests. That's because if I need to use the commented part for debugging, I don't have to write the nest in again, I just uncomment the line. :)
10-15-2009, 01:54 AM
getslotownlost

Looks good, going to test now
10-18-2009, 12:01 AM
tofurocks

Just started using SCAR, first script I tested. Seems very nice. Will post proggress reports if I choose to stay with it ;)
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 1 Hours, 33 Minutes and 5 Seconds ]
[ Loads Done: 36 ]
[ Logs Chopped: 972 ]
[ Levels Gained: 0 ]
[ Exp Gained: 65610 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
10-18-2009, 10:15 AM
stefuck

damn mate it works perfect i forgot to copy my proggy next time il post it for u

i ran it for 6 hours and 30 mins.

it was 78 loads done and like 150k exp gained

6 breaks
10-18-2009, 03:31 PM
Zerghunter3000

I have a Question, umm how do you actually get it to show a progress report? o.o
10-18-2009, 03:36 PM
Bionicle

Quote:

Originally Posted by Zerghunter3000

I have a Question, umm how do you actually get it to show a progress report? o.o

it should do it automatically in the debug box. if not, then you must have done somthing to it :p

try scrolling up in your debug box, i dont think coh3n used a single 'ClearDebug' in his script so there should be one there.
(debug box is the box on the bottom of the scar screen if you didn't know :p)
10-18-2009, 03:55 PM
Zerghunter3000

no, i mean how would i add that into my script i meant
10-18-2009, 04:11 PM
Bionicle

Quote:

Originally Posted by Zerghunter3000

no, i mean how would i add that into my script i meant

oh.
make a procedure called 'ProgressReport'.
then add a whole bunch of WriteLn functions.
then call ProgressReport any time in your script.

This is very simple, but if you need anything like + TimeRunning or w/e, look up a tutorial.
10-18-2009, 04:29 PM
Dynamite

Check my ProWoodcutter for an advanced progress report.
But if you would like a less advanced one look at tuts as bionicle said :)
10-18-2009, 04:50 PM
zionz

Anywhere Powerchopper V.1.8!
Loading, please wait...
SRL Compiled in 16 msec
SMART Initialized.
Loaded: Server 152, Members: False, Signed: True, Super Detail: False.

Creating the NickTPA.
Found normal hatchet.
Inventory full, dropping logs...
Cut desired number of logs, logging out.
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper ]
[============================= V.1.8 =============================]
[ ]
[ Ran For: 5 Minutes and 0 Seconds ]
[ Loads Done: 1 ]
[ Logs Chopped: 28 ]
[ Levels Gained: 0 ]
[ Exp Gained: 1890 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[ Thank-you for using Coh3n's Anywhere Powerchopper! ]
[================================================== ===============]
[ Be sure to post your progress reports at VillaVu/SRL-Forums! ]
[================================================== ===============]
** Warning in S_SwitchPlayer: Your Player is Inactive, Terminating Script. **
Successfully executed

I noticed that errrr..... yeah.. after it fills up inv.. it just logs out for no reason... lol?? Ok i payed more attention, i set it from 000 logs to be cut to 3000. LOL
10-18-2009, 04:59 PM
Tresscross

wow dude, epic autoer, hope you make a fishing one X D
10-18-2009, 05:05 PM
zionz

I want a fishing one too sooo bad!
10-18-2009, 05:11 PM
kevinconklin

it works!
10-18-2009, 05:51 PM
tofurocks

Quote:

Originally Posted by zionz

I want a fishing one too sooo bad!

Look at the other scripts in the "Free for All Script" section. There are a bunch.
10-18-2009, 05:57 PM
tabernacle

imj getting this error whats wrong

Line 47: [Error] (375:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.21\includes\SRL
10-18-2009, 05:59 PM
Bionicle

Quote:

Originally Posted by tabernacle

imj getting this error whats wrong

Line 47: [Error] (375:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.21\includes\SRL

do u have SRL downloaded? lol
10-18-2009, 06:03 PM
tabernacle

yea i checked....im fgoing to file download srl and the includes....is there something else i shouldve done?
10-18-2009, 06:05 PM
Bionicle

Quote:

Originally Posted by tabernacle

yea i checked....im fgoing to file download srl and the includes....is there something else i shouldve done?

nope, thats it. most scripts wont run without SRL downloaded.
10-18-2009, 06:14 PM
tabernacle

if im going to be chopping normal trees do i enter trees or normal?
10-18-2009, 06:30 PM
tofurocks

Quote:

Originally Posted by tabernacle

if im going to be chopping normal trees do i enter trees or normal?

I think it's just "tree".
Look through the script and see what it reads it as.
10-18-2009, 08:10 PM
Coh3n

Quote:

Originally Posted by Zerghunter3000

I have a Question, umm how do you actually get it to show a progress report? o.o

Yes, like Bionicle said, you can be as creative as you want using Writeln commands, and functions like Inc, IncEx, and some more advanced techniques for multiplayer. I'm sure there's a tutorial on it. Progress reports is one of the things I would really like to add to my scripting tutorial, but I need to get time first. :p

Quote:

Originally Posted by zionz

I noticed that errrr..... yeah.. after it fills up inv.. it just logs out for no reason... lol?? Ok i payed more attention, i set it from 000 logs to be cut to 3000. LOL

Haha you aren't the first person to do that. :duh:

Quote:

Originally Posted by Tresscross

wow dude, epic autoer, hope you make a fishing one X D

Sorry, but I don't see that happening for a long while. :(

Quote:

Originally Posted by tabernacle

imj getting this error whats wrong

Line 47: [Error] (375:11): Unknown identifier 'CreateTPAFromBMP' in script C:\Program Files\SCAR 3.21\includes\SRL

Make sure you SRL is up to date.

Quote:

Originally Posted by tofurocks

I think it's just "tree".
Look through the script and see what it reads it as.

That's correct. What you put in DeclarePlayers is also used as an uptext check, so you will want to put the actual name of the tree. :)
____________________________

To everyone else, I'm glad you like it and it's working well for you! :D

Keep the progress reports coming!
10-19-2009, 03:47 AM
xxshafaxx

yo its good like it works for long but when it checks my stats and click on the toolbar to scroll down it keeps doing it for a period of time or like wen i lv and it click the thing it doesnt exit why not?
10-19-2009, 10:17 PM
Tresscross

Line 1: [Error] (1:1): Unexpected end of file in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
Please and Thanks,
Tresscross
10-20-2009, 10:30 AM
victoryn

Quote:

Originally Posted by Tresscross

Line 1: [Error] (1:1): Unexpected end of file in script C:\Program Files\SCAR 3.21\includes\SRL\SRL\Misc\SMART.SCAR
Please and Thanks,
Tresscross

That error doesn't come from the woodcutting script. It's a problem with the SMART plugin. I had a similar problem trying to get this running. I found that the Reflection enabled SMART plugin was buggy and wasn't letting the script compile and run. If you've using the reflection SMART you'll need to remove it with the one without reflection. Some scripts use the reflection method and probably won't work for you anymore, but it seems with the new Runetek 5 engine reflection is broken anyway.

Show 40 post(s) from this thread on one page

All times are GMT. The time now is 02:12 PM.