OKay thanks. :)Quote:
Originally Posted by raggdoll811
Printable View
OKay thanks. :)Quote:
Originally Posted by raggdoll811
i used to cut willows before ivy was added, i would cut straight for hours with no errors, i cut the willows behind lumby farm,the fishing spot (3willows beside eachother) try there?Quote:
Originally Posted by raggdoll811
Edit: hey cohen, maybe some hi-tech censor that will catch every "you successfully chop away some ivy" and just use that for exp gained? just a guess :)
Yeah I thought of that too. But once you get more than 8 (that's how many lines are in the chat), there's no way to tell if you get another one because the chat box doesn't change. :(Quote:
Originally Posted by Vitaminpee
Good thought though.
Actually you could check pixel changes in the scrollbar on the side? Thats size does change, and using only the game messages the scrollbar takes ages to go as small as it can, so you prolly take breaks between. Thats my epic idea xDQuote:
Originally Posted by Coh3n
when ever u successfuly chop an ivy a small brnach would fall off :O
maybe something hi-tech that can keep track of that (if even possible)
*also for the other suggestion, the chat box also randomly repeats "you swing your hatchet at the ivy", which the successful ivy cutting wouldny fill the screen, OR you can make that examine random thing part to examine fast enough to cut the "successful ivy cutting" from filling.
GOODNIGHT:)
Hmm that's not a bad idea. Might be pretty difficult, but it's possible (I think).Quote:
Originally Posted by Frement
Some good suggestions, thanks. :)Quote:
Originally Posted by Vitaminpee
I'll try to look into fixing it if I get time. :)
Whats hard about it? Isnt there something like PixelShift() or something?Quote:
Originally Posted by Coh3n
Dude, your a good scripter, im sure you can figure something out for it ;)
I would try later but i dont have a members account anyway.
The simplest things seem to be the most difficult. ;)Quote:
Originally Posted by Frement
i just woke up with my ivy bot on all night , this happened before, i cant get that proggy thing because a popup would say out of resources an when i press OK all of scar freezes and i have to press X :o im not sure if its my fault or something else though
Well the progress reports for ivy don't work anyway. It'll just say the amount of time that you were cutting. I think that error has to do with SCAR running out of memory. Just make sure to restart SCAR before you start a script and that shouldn't happen again. :)Quote:
Originally Posted by Vitaminpee
sorry im pretty clueless about scar, when i am in smart botting at ivy and when i disable is there any way i can talk? because my friends would talk to me and i can reply :P but if its not possible no big deal.
Yes, but it's very inconvenient and can break the script.
There's no way to do it and still have the script running, unless you use a standard webclient, but that would take control of your mouse.Quote:
Originally Posted by Vitaminpee
just for suggestions, when i need to talk i pause the script then disable the smart and then reply then re enable to resume script. i do that with poms but cant use your power cutter, wish i could lags like made because i forgot that wait procedure you gave coh3n. Ty
i no this may not be the right topic to post this in but i know it gets checked alot and help would be greatly appreciated... im using the Draynor Chop and Bank script. Works great with 1 account but when i make the players 2 and i set up the 2nd player and i did take the } where i was supose to.... it chops on player 1 banks and i have it set to switch after 1 load for testing.. it does a load logs out for the break but does not sign in on the other account?
Cant find tree, doesnt work.
Oh wait, invalid tree type in declare players. im chopping normal trees, and for the parameter i enter normal. wtf is up. yooo
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willows. ]
[ ]
[ Ran For: 1 Hours, 18 Minutes and 33 Seconds ]
[ Loads Done: 25 ]
[ Logs Chopped: 700 ]
[ Levels Gained: 1 ]
[ Exp Gained: 47250 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[================================================== ===============
Works well at my nans house :Pfast computer. however, there was an error, the uptext thing failed 3-4 times per load near crafting guild willows. also when it drops logs, is it too bottish type movement (dubnno) but when it went to drop , it clicked use instead of drop and then it kept hovering over each seperate log and didnt drop because it didnt click out of use mode.
TY
You should post on that script's thread.Quote:
Originally Posted by topgamer
What are you, 8? Show some maturity. Put in Tree.Quote:
Originally Posted by Jewish_Rhapsody
The uptext error happens, there's nothing I can do about that. As for the using the log, I've never seen that happen before. Has it happened more than once?Quote:
Originally Posted by bangali
i think this is only time but just in case some1 tries to do a whole night, imagine that happens lol :P so you could (since your good at scripting compared to most of us :P) put a solution that if it is use, then it reclicks and drops. also the uptext error, would it be better if you log out if it does 10 time in a row, not like 50 times in the whole script
and is the mouse movement a bit fast when dropping, it goes crazy over the screen :P not in a bad way
Ty
The uptext error wouldn't be good to logout after only 10 tries because what if someone is cutting only Oak trees, and there are lots of normal trees around? If the oak tree is cut down, it will mouse over the normal trees probably more than 10 times in a row.Quote:
Originally Posted by bangali
Also, I think the mouse speed varies. I don't set/change the mouse speed in my script, so any changes would be in SRL.
no i dont mean only after 10 altogether in the whole run it logs out :P i meant when it does it in a row. so lets say your cutting willows. it cant find it 8 times but it carries on. imagine this happened 7 times in 7 loads. Then in the normal script this would make it log out because it is over 50 times in the entire script. What im trying to say is instead of that, if the script cant find the willows 10+ in a single time before finding a tree, then it logs out or any other number. this could make the script log out if it gets lost but also carry on if there is odd errors in the entire run :P
Only my ideas :)
I know what you meant, and it doesn't logout after 50 total. It logs out after 50 in a row. I was saying that 10 is too low of a number because it could easily be reached if the tree you're cutting is down, and there are other trees with similar colors in the area. Meaning you will get uptext errors while it waits for the tree to grow back.Quote:
Originally Posted by bangali
oh :) lool so you had the idea already. My bad for misunderstanding.
i thought that was the reason why it logged out always for me. also did you stop 'checiking' random thing because i noticed yesterday it didnt come up
Do you mean did I stop "Scanning for random..." from appearing in the debug? If so, yes, I did. :)Quote:
Originally Posted by bangali
When I try to run it with 2 characters it gives me out of range error in line 996, right after it has dumbed the first load of logs and tries to give me a report (how many logs cutted, exp etc) and stops the script.
Works great with one player.
Since I assume this is either something I missed or an easy fix, I ask if it's possible to have one or more characters p2p and others f2p?
Hey Coh3n I'm using this for Ivy but when he is chopping it down he likes to run around alot from Ivy to Ivy thinking it's cut down? Anything I'm doing wrong?
Make sure you have HowManyPlayers set to 2.Quote:
Originally Posted by Cazabacca
Hmm does it do that all the time or just sometimes?Quote:
Originally Posted by spart300
Seems like your script (or SRL?) got a little leak somwhere:
Code:.....
BMP[1367] has not been freed in the script, freeing it now.
BMP[1368] has not been freed in the script, freeing it now.
BMP[1369] has not been freed in the script, freeing it now.
BMP[1370] has not been freed in the script, freeing it now.
Must be SRL, I just checked and I only use a bitmap once, and unless I'm missing something, it's freed.Quote:
Originally Posted by mastaraymond
Hmm; Load_TreeRecords creates a bitmap which is never freed.. And Load_TreeRecords is called quite often in the script.. ;)Quote:
Originally Posted by Coh3n
Oh wow, did not even think of that...Quote:
Originally Posted by mastaraymond
Thanks for pointing that out. :)
All the time Coh3n
Hmm, I never had that happen when I was testing, but I'll have to take another look at it when I get time. Make sure that the camera/is at the best angle. The script may not always set it properly.Quote:
Originally Posted by spart300
yoyo, 95 wc! but now ever since todays update all or alot of the scripts are not working, like it will go to check your level and then click on the mining or smithing skill and the box pops up so it can't find the trees
Kevin, update your SRL. :) I think it's fixed.
Yes it is. I don't know if everything is fixed yet, but the skill functions should work.Quote:
Originally Posted by i luffs yeww
k it works, for a second there i thought i was going to have to get 99 wc legit
Yeah wow, no one wants to do that.Quote:
Originally Posted by kevinconklin
Just thought i'd add my first progress report. Loving the script BTW works perfectly for me
[================================================== ===============]
[ Coh3n's Anywhere PowerChopper! ]
[============================= V.3.1 =============================]
[ ]
[ You have chosen to cut Willows. ]
[ ]
[ Ran For: 27 Minutes and 24 Seconds ]
[ Loads Done: 8 ]
[ Logs Chopped: 216 ]
[ Levels Gained: 1 ]
[ Exp Gained: 14580 ]
[ Breaks: 8 ]
[ ]
[================================================== ===============]
[================================================== ===============]