[WoodCutting] [SRL-6] Draynor Chop N' Bank

-Removed this pic-
quick map o the oaks... didnt go to far into jail as i was on a lvl 3 >.<

E:making a bigger one, i see i missed a few... best spot is the jail so far

E: Ok, the safest spot for low levels with a few together is the corner up at the pottery place... there are about 5 there on that corner but you cant get to atleast one... 2 are in the same screen of eachother... i will post this new pic a bit later, ive added in diff colours for diff tree types >.<

E: Complete Draynor Lumber map. -The Mansion >.<

http://img689.imageshack.us/img689/5...norlumberf.jpg

Im sure it was not necessary but well its done now. =-S

proggy for today

** Warning in Chop_Trees: Trees Not Found.**

Code:

** Warning in Chop_Trees: Couldn't find trees after 50 tries, logging out... ** ** Warning in Next_Player: Your Player Is Inactive, Terminating Script. ** [=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================= V.3.2 =============================] [ ] [ You have chosen to cut Willow trees. ] [ ] [ Ran For: 2 Hours, 49 Minutes and 27 Seconds ] [ Loads Done: 56 ] [ Logs Chopped: 1568 ] [ Levels Gained: 1 ] [ Exp Gained: 105840 ] [ Breaks: 0 ] [ ] [=================================================================] [=================================================================] Successfully executed

Didn't detect random, just like your powerchopper script before you updated it

@Mrbanana: :eek: Wasn't expecting that. :p Most of the good places for Oaks seem to be really far away, and no matter how well the walking code is written, wouldn't run for very long. I think that the spot I have no is the best for Oaks. You'll just have to get your combat up before doing it (your combat should be high if you're autoing anyway). I may add in the one oak tree beside the bank for low level players, but I'll have to see.

Quote:

Originally Posted by hubbard1989

proggy for today

** Warning in Chop_Trees: Trees Not Found.**

Code:

** Warning in Chop_Trees: Couldn't find trees after 50 tries, logging out... ** ** Warning in Next_Player: Your Player Is Inactive, Terminating Script. ** [=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================= V.3.2 =============================] [ ] [ You have chosen to cut Willow trees. ] [ ] [ Ran For: 2 Hours, 49 Minutes and 27 Seconds ] [ Loads Done: 56 ] [ Logs Chopped: 1568 ] [ Levels Gained: 1 ] [ Exp Gained: 105840 ] [ Breaks: 0 ] [ ] [=================================================================] [=================================================================] Successfully executed

Didn't detect random, just like your powerchopper script before you updated it

Ah, on the last update I forgot to add a Randoms check if it didn't find the trees. I added one if it couldn't find the uptext, but not both. I'll be sure to add this to the next version.

I'm also working on a really sweet form for this script. I'm really proud of this form so far, so I hope you guys will like it. :)

hehe ok , and yeah just started a new toon and was like OMG 1HP RUUUN, just grabbed a power chopper for oaks and trees though.

***** STR: 'Leo The Gravedigger' RANDOM SOLVING FAILED! *****
** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out... **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **
[================================================== ===============]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= V.3.2 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 3 Hours, 42 Minutes and 13 Seconds ]
[ Loads Done: 15 ]
[ Logs Chopped: 420 ]
[ Levels Gained: 5 ]
[ Exp Gained: 28350 ]
[ Breaks: 0 ]
[ ]
[================================================== ===============]
[================================================== ===============]

damn randoms D:

Hey well at least I know my script is detecting the randoms. :p

Script Updated!

You now have to download this script via SVN Checkout (see first post of instructions).

[Rev. 3]
- Added SRL stats.
- Added the option to play a random sound if a random event is detected.
- Fixed the amount of xp you get if you're cutting oak trees.
- Added a break time feature to the script setup.
- Took out the "Break_After" parameter in the DeclarePlayers. The script will now automatically break after 1 hour (+/- 5 min.) if you choose to take breaks.

EDIT: Got this nice report cutting Oaks. It stopped due to the failing of the Molly random.

PHP Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================= Rev.3 =============================] [ ] [ You have chosen to cut Oak trees. ] [ ] [ Ran For: 3 Hours, 43 Minutes and 58 Seconds ] [ Loads Done: 75 ] [ Logs Chopped: 1996 ] [ Levels Gained: 0 ] [ Exp Gained: 74850 ] [ Breaks: 2 ] [ ] [=================================================================] [=================================================================]

EDIT2: Got another nice one, this time cutting Willows. This one stopped at the Pinball random.

PHP Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================= Rev.3 =============================] [ ] [ You have chosen to cut Willow trees. ] [ ] [ Ran For: 4 Hours, 7 Minutes and 38 Seconds ] [ Loads Done: 66 ] [ Logs Chopped: 1848 ] [ Levels Gained: 1 ] [ Exp Gained: 124740 ] [ Breaks: 2 ] [ ] [=================================================================] [=================================================================]

Quote:

Script Updated!

* You now have to download this script via SVN Checkout (see first post of instructions).

[Rev. 3]
- Added SRL stats.
- Added the option to play a random sound if a random event is detected.
- Fixed the amount of xp you get if you're cutting oak trees.
- Added a break time feature to the script setup.
- Took out the "Break_After" parameter in the DeclarePlayers. The script will now automatically break after 1 hour (+/- 5 min.) if you choose to take breaks.

Great updates! I'll run it and post back with a good prog :)

my uptext for some reason isn't working because it isn't clicking to chop on the trees

edit: fixed it will post proggy

Quote:

Originally Posted by sk80rdie76

my uptext for some reason isn't working because it isn't clicking to chop on the trees

edit: fixed it will post proggy

:p I can see your using it at my stats page. Thanks for signing up for the stats.

EDIT: Just got this report cutting Oaks. Stopped because I lost connection.

PHP Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================= Rev.6 =============================] [ ] [ You have chosen to cut Oak trees. ] [ ] [ Ran For: 5 Hours, 12 Minutes and 34 Seconds ] [ Loads Done: 103 ] [ Logs Chopped: 2790 ] [ Levels Gained: 0 ] [ Exp Gained: 104625 ] [ Breaks: 3 ] [ ] [=================================================================] [=================================================================]

I just ran into an issue, whilst it was searching for trees i got a whole string of "couldn't find uptext" error messages followed by

** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out... **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

I logged on, I was in a random (Niles i think, one of those guys anyway), I figure, after a few couln't find uptexts, does it check for randoms, if it doesn't that may be a good thing to add in on your next update

I was using V3.2 of your script and Scar 3.23beta

Quote:

Originally Posted by Bad Boy JH

I just ran into an issue, whilst it was searching for trees i got a whole string of "couldn't find uptext" error messages followed by

** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out... **
** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

I logged on, I was in a random (Niles i think, one of those guys anyway), I figure, after a few couln't find uptexts, does it check for randoms, if it doesn't that may be a good thing to add in on your next update

I was using V3.2 of your script and Scar 3.23beta

Yeah, I don't remember if I added the random's check in that version or if it was the next. That issue should be fixed in the current version. Just download and away you go. I'm about to update it again so make sure it's at revision 6. ;)

Good job on latest version

Here is my latest progress report and feedback
[================================================== ===============]
[ Coh3n's Draynor Chop N' Bank! ]
[============================= Rev.3 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 4 Hours, 31 Minutes and 6 Seconds ]
[ Loads Done: 63 ]
[ Logs Chopped: 1764 ]
[ Levels Gained: 0 ]
[ Exp Gained: 119070 ]
[ Breaks: 3 ]
[ ]
[================================================== ===============]
[================================================== ===============]
It ran okay, except for the following glitch:

Script did not detect random. I got 2000 uptext errors in a row. after looking at your code, if i understand it correctly, it looks like you accidentally set wrongUptext = 0 every time it looks for a tree. i believe if you move that line of code to here, it will work properly.

Code:

if ((wrongUptext >= 50)) then begin Find_Randoms; wrongUptext := 0 //Move it here

EDIT:
i did this, and it didnt seem to help.....

I'm pretty sure that Findrandoms is a boolean, so you only want to reset the wronguptext to 0 if you DO find a random, otherwise you want to log the player out and terminate the script.

I Don't QUITE have the experiance to do it, so....I'll leave it up to you...

Thanks for the feedback, but the way I have it is suppose to work. I'm not sure why it didn't log you out. It only sets the wrongUptext variable back to 0 if the uptext is found. I also have it set to check for randoms if:

The trees aren't found.

The wrong uptext is found 50 times in a row. If you're chopping Oaks, I have to script try to relocate back to it's original position. If the uptext isn't found 60 times in a row, then the script is suppose to log out, and set that current player to false.

I've looked over my code three times, and don't understand why it wouldn't log out, other than it would find the right uptext inside the random every once in a while. The latter is unlikely considering there aren't any trees inside the randoms as far as I know. Depending on the random, there may not be a built-in detection system for it (it may be currently unsolvable). However, I thought that if it was unsolvable, there was still a function that would log the character out, and set it to false if it happened to come by that particular event.

I'm actually going to add a Writeln procedure in my Find_Randoms function, just to make sure it's actually being run. Please update to revision 9. :)

Thanks,
Coh3n

Here is what i did. after the line where you set wrongUptext :=0 i added

writeln('uptext has been set to zero')

so when the script is running, it will tell you if it gets set back to zero. here is what i got

Code:

** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero ** Warning in Chop_Tree: Error Finding Uptext. ** uptext has been set to zero

so you can see, wrongUptext is being reset prematurely

Quote:

Originally Posted by hubbard1989

so you can see, wrongUptext is being reset prematurely

I see it, but I don't believe it. That makes absolutely no sense. The WaitUpText function returns try only if the uptext is found, and the same should happen with this code:
SCAR Code:
if (WaitUpTextMulti(Tree.UpText, 200)) then
      // if WaitOptionMulti(Tree.UpText, 200) then
      begin
        wrongUptext := 0;
        Mouse(x, y, 0, 0, True);
Should only be executed if the uptext is found. I would love someone to educate me on why it's still begin executed, even though the if..then statement is false.

EDIT: Hubbard: I don't know where you put that line, but I don't think it was in the right place. Here's what I did:
SCAR Code:
if (WaitUpTextMulti(Tree.UpText, 200)) then
  // if WaitOptionMulti(Tree.UpText, 200) then
  begin
    Writeln('Uptext found!');
    wrongUptext := 0;
    Writeln('Set wrongUptext back to 0.');
    Mouse(x, y, 0, 0, True);
And it did exactly what it's suppose to. I purposely set the uptext to one that would fail 50 times in a row. After it did, it looked for randoms, and then logged out. The debug info. was as follows:

Code:

** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Tree: Error Finding Uptext. ** Scanning for random events... ** Warning in Chop_Trees: Couldn't find uptext after 50 tries, logging out. ** ** Warning in Next_Player: Your Player Is Inactive, Terminating Script. **

EDIT2: Please update to Rev. 10. :)

Thanks, works like a charm. Will edit later and post new proggy.

Stopped myself so that I can buy new axe.

Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================ Rev.10 =============================] [ ] [ You have chosen to cut Oak trees. ] [ ] [ Ran For: 2 Hours, 32 Minutes and 34 Seconds ] [ Loads Done: 18 ] [ Logs Chopped: 503 ] [ Levels Gained: 11 ] [ Exp Gained: 18862 ] [ Breaks: 1 ] [ ] [=================================================================] [=================================================================]

Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================ Rev.10 =============================] [ ] [ You have chosen to cut Oak trees. ] [ ] [ Ran For: 2 Hours, 1 Minutes and 27 Seconds ] [ Loads Done: 42 ] [ Logs Chopped: 1176 ] [ Levels Gained: 5 ] [ Exp Gained: 44100 ] [ Breaks: 1 ] [ ] [=================================================================] [=================================================================]

Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================ Rev.10 =============================] [ ] [ You have chosen to cut Willow trees. ] [ ] [ Ran For: 3 Hours, 9 Minutes and 45 Seconds ] [ Loads Done: 66 ] [ Logs Chopped: 1848 ] [ Levels Gained: 0 ] [ Exp Gained: 124740 ] [ Breaks: 0 ] [ ] [=================================================================] [=================================================================]

manually stopped

I got about 100 "Scanning for random events..." messages before I got to the willows straight up, you may want to check that out...

Quote:

Originally Posted by Bad Boy JH

I got about 100 "Scanning for random events..." messages before I got to the willows straight up, you may want to check that out...

That's suppose to happen. It looks for randoms while you walk to the trees. If you want, you can comment out that line in the Find_Randoms procedure. It's up to you.

EDIT: I would also like to remind everyone who uses this script to please sign up for SRL stats. It takes 30 seconds plus you can see who's used the script the most. :rolleyes:

Should It really check for randoms 5 times every second, (it was the willow trees)

Quote:

Originally Posted by Bad Boy JH

Should It really check for randoms 5 times every second, (it was the willow trees)

Well it doesn't effect the script efficiency either way. I could add a wait in there, but that would overall slow down the script.

It makes RS go all skippy and slows down my computer when that happens...then again...good count indicator..."stop slowing down you stupid computer" every few mins...

Quote:

Originally Posted by Bad Boy JH

It makes RS go all skippy and slows down my computer when that happens...then again...good count indicator..."stop slowing down you stupid computer" every few mins...

Well whether the text shows up in the debug or not, your computer would still lag. I have an idea that may stop that. I'll edit and update it now.

EDIT: Please update to Revision 11.

Quote:

Originally Posted by Coh3n

I would also like to remind everyone who uses this script to please sign up for SRL stats. It takes 30 seconds plus you can see who's used the script the most. :rolleyes:

I have registered there and my acc is FateOfRoses... :D

Quote:

Originally Posted by Alligaattor

I have registered there and my acc is FateOfRoses... :D

Oh I was wondering who that was. You're really racking up the hours. :p

I like it!

Quote:

Originally Posted by Coh3n

Oh I was wondering who that was. You're really racking up the hours. :p

I like it!

Only a little :D

I really like your script :P
The only problem is that it doesn't solve all randoms... :S
but it isn't your scripts fault ;)

Quote:

Originally Posted by Alligaattor

Only a little :D

I really like your script :P
The only problem is that it doesn't solve all randoms... :S
but it isn't your scripts fault ;)

Yeah, there are a lot of people working on the randoms all the time. Chances are they won't ALL be solvable at one time, but that's the goal. :p

I am unsure if this is your fault...my fault or SRL's fault...BUT after a random event, the gift box doesn't get used...it sits in my invo collecting dust and taking up space...

[================================================== ===============]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.10 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 13 Minutes and 1 Seconds ]
[ Loads Done: 90 ]
[ Logs Chopped: 2520 ]
[ Levels Gained: 1 ]
[ Exp Gained: 170100 ]
[ Breaks: 4 ]
[ ]
[================================================== ===============]
[================================================== ===============]

That Part I do Like the run for a few hours collect a lot of logs...I love it

I am unsure if this is your fault...my fault or SRL's fault...BUT after a random event, the gift box doesn't get used...it sits in my invo collecting dust and taking up space...

[================================================== ===============]
[ Coh3n's Draynor Chop N' Bank! ]
[============================ Rev.10 =============================]
[ ]
[ You have chosen to cut Willow trees. ]
[ ]
[ Ran For: 6 Hours, 13 Minutes and 1 Seconds ]
[ Loads Done: 90 ]
[ Logs Chopped: 2520 ]
[ Levels Gained: 1 ]
[ Exp Gained: 170100 ]
[ Breaks: 4 ]
[ ]
[================================================== ===============]
[================================================== ===============]

That Part I do Like the run for a few hours collect a lot of logs...I love it

EDIT appologies, thought it didn't send

/me hits the computer... "Bad Computer Bad...."

Nice report! And try the new version for your random event box problem. :)

It found the event box, and used it, getting the lamp...unfortunatly, it failed to use the lamp... well you half fixed it...

Quote:

Originally Posted by Bad Boy JH

It found the event box, and used it, getting the lamp...unfortunatly, it failed to use the lamp... well you half fixed it...

Alright, I added a FindLamp function. We'll see if that works.

Here's a little proggy :P

Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================ Rev.13 =============================] [ ] [ You have chosen to cut Oak trees. ] [ ] [ Ran For: 5 Hours, 16 Minutes and 10 Seconds ] [ Loads Done: 132 ] [ Logs Chopped: 3614 ] [ Levels Gained: 2 ] [ Exp Gained: 135525 ] [ Breaks: 0 ] [ ] [=================================================================] [=================================================================]

Sometimes it clicks just random tree and gets lost. It is always near the prison tho...

Hey bro, instead of using your Changelog.txt file (or in addition to, whichever you prefer) you can use the subversion log messages :p. That's what they are there for ;).

Quote:

Originally Posted by Alligaattor

Here's a little proggy :P

Code:

[=================================================================] [ Coh3n's Draynor Chop N' Bank! ] [============================ Rev.13 =============================] [ ] [ You have chosen to cut Oak trees. ] [ ] [ Ran For: 5 Hours, 16 Minutes and 10 Seconds ] [ Loads Done: 132 ] [ Logs Chopped: 3614 ] [ Levels Gained: 2 ] [ Exp Gained: 135525 ] [ Breaks: 0 ] [ ] [=================================================================] [=================================================================]

Sometimes it clicks just random tree and gets lost. It is always near the prison tho...

Nice report, and yes that really annoys me also. I don't know how to prevent that. It already does the uptext check, and apparently gets it wrong sometimes.

Quote:

Originally Posted by Sex

Hey bro, instead of using your Changelog.txt file (or in addition to, whichever you prefer) you can use the subversion log messages :p. That's what they are there for ;).

Yeah I can do that. :)

Please update to revision 15.

Ooh! I see you have putted my stats and proggy on the first post :P
Thank you for the honor.

Quote:

Originally Posted by Alligaattor

Ooh! I see you have putted my stats and proggy on the first post :P
Thank you for the honor.

:p You "worked" for it.

Quote:

Originally Posted by Coh3n

:p You "worked" for it.

yeah... "worked"
have one proggy coming, 9 hours already without stops :P
It doesn't click the lamp tho... just tries to bank it for all eternity :)

Quote:

Originally Posted by Alligaattor

yeah... "worked"
have one proggy coming, 8 and a half hours already without stops :P
It doesn't click the lamp tho... just tries to bank it for all eternity :)

Still? Does it even click the lamp?

[SRL-6] Draynor Chop N' Bank | By Coh3n