Printable View
The "Failed to Setup Player" is most likely user error. However, I'll be going through and making some more updates tonight, so check back.Quote:
Originally Posted by Mister Snow
This is a known problem and is being worked on.Quote:
Originally Posted by lxlifestream
If there's something I am doing stupid, lemme know :PQuote:
Originally Posted by NCDS
I started in Seers bank and it walked me south a bit, then couldn't find spot on minimap or something. Will look forward to some updates. :)
does you attack have to be high enough to wield the hatchet? (im WC pure)
No, you can have the hatchet in the inventory.
it keeps doing nothing in edge yews while other bots are working :huh:
I'll have a look.Quote:
Originally Posted by neper
Draynor yews seems to work, but not flawlessly.
After it chops down a tree 3/10 times it will stand at the tree spamming mouse movements to other trees, and will wait for tree to respawn.
The times it does make it to a new tree, it will stand around for a while, after about 10 seconds (standing next to the tree) it will lower camera angle and click on the tree.
Just seems to be slow and take a long time to register.
That seems to be the best I can describe it..
anyone know if Seers maples is working ? :S
I love draynor yews script, but does anyone else have the problem where it fails the trip between the bank and the trees. Mine usually seems to happen in the bank or inside the fence of the "jail" place.
I have had this problem a few times. It seems to me at which tree it comes from. It happens to me when my player ends up behind the tree or is out of view. Usually if you let it bank and come back the problem fixes it self. I haven't had any real problems with that except the occasional trip. Hope this helps.Quote:
Originally Posted by tha mezziah
Edgeville Yews has erratic behavior. It tries to click near the southern tree icon, but ends up clicking outside the enclosed area. Then it attempts to correct itself by clicking on the other side of the tree, only to click outside of the area again. It repeats this process over and over again.
tested Draynor willows on my skiller. It works fine, cutting willows and banking but it also banks my rune hatchet
Is there anyway I can get the full script of MSI scripts? It should be a very good learning material for me.
I'm sorry but wheres the download at? it sends me to a guide.
kababayan, They worked hard to make this script and create the guide for free. Please make some effort to read.Quote:
Originally Posted by angelodafilipino
This may seem like the dumbest question ever.. But how do I download it? :|
Read one of the guides.
This is the first script I will ever use with Simba, trying it right now.
I mean this exact script, I don't see a link.
Because it has its own include. Check the MSI section of the forums, there are plenty of guides on using it.Quote:
Originally Posted by Orizon
draynor willow works flawlessly (- too many people using this and smilar scripts make it very very crowded).
My only criticism. The seers village yews bot is horrible... it hardly ever works right. It always fails to walk to the bank. I have to babysit this thing and check it every 15 minutes. The draynor willows one is amazing. But seers village yews needs some work.
I keep getting this on Seers village yews
{----------------------------------------------------------------}
{ MSI Phoenix Player Report }
{----------------------------------------------------------------}
{ Time Running: 9 Minutes and 11 Seconds }
{----------------------------------------------------------------}
{ }
{ Player 0: Sly Death 22 }
{ Location: Seers Village Bank }
{ Time: 07m 37s }
{ Active: False }
{ Reason: Failed walk from Seers Village Bank to Seers Village Yews}
{ }
{ Script: Seers Village Yews }
{ Time: 07m 37s }
{ Skill: Woodcutting }
{ Exp: 4,725 }
{ Level: 95 }
{ Loads: 1 }
{ Item: Yew logs }
{ Amount: 27 }
{ }
{----------------------------------------------------------------}
{----------------------------------------------------------------}
[0:09:15]: [ Sly Death 22 ] ------ All players inactive
[0:09:15]: Thank-you for using MSI Phoenix scripts!
[0:09:15]: Successfully executed.
Please add Infernal Adze :)
Hey Coh3n,
How can I get MSI to use a black hatchet?? It just searches and finds the bronze or else it stops script and exits!
It won't bank draynor willows....
[0:06:42]: [ ] -------- MSI_FindObjectTPA: BANK_DRAYNOR
[0:06:42]: [ ] ---------- Found: 50, NOT ENOUGH
[0:06:42]: [ ] ---------- Found: 16, NOT ENOUGH
[0:06:42]: [ ] ---------- Found: 34, NOT ENOUGH
[0:06:42]: [ ] ---------- Found: 9, NOT ENOUGH
[0:06:42]: [ ] ---------- Found: 45, NOT ENOUGH
[0:06:42]: [ ] ---------- Found: 1, NOT ENOUGH
[0:06:42]: [ ] ---------- Found: 8, NOT ENOUGH
[0:06:42]: [ ] ---------- Took 63 ms to complete
[0:06:42]: [ ] -------- MSI_FindObjectTPA: False
[0:06:43]: [ ] ---------- Players Found: 3
[0:06:43]: [ ] ---------- Scanning for randoms...
[0:06:43]: [ ] ---------- Players Found: 3
[0:06:43]: [ ] -------- MSI_FindObjectTPA: BANK_DRAYNOR
[0:06:43]: [ ] ---------- Found: 46, NOT ENOUGH
[0:06:43]: [ ] ---------- Found: 16, NOT ENOUGH
[0:06:43]: [ ] ---------- Found: 34, NOT ENOUGH
[0:06:43]: [ ] ---------- Found: 9, NOT ENOUGH
[0:06:43]: [ ] ---------- Found: 45, NOT ENOUGH
[0:06:43]: [ ] ---------- Found: 1, NOT ENOUGH
Hello! Can I know if there is an option which let me choose whether it'll drop 1st/2nd/3rd slots on powerchopping? I need it because I'm only level 3 and I won't be able to wear rune hatchet and it ends up dropping hatchet as well.. Please let me know
It doesn't drop the rune hatchet for me and I can't wear it either....I wear it in slot 1 ,top left spot.
{----------------------------------------------------------------}
{ MSI Phoenix Player Report }
{----------------------------------------------------------------}
{ Time Running: 16 Minutes and 2 Seconds }
{----------------------------------------------------------------}
{ }
{ Player 6: Myrthe.Van.Herck@Hotmail.Com }
{ Location: Varrock East Oaks }
{ Time: 09m 39s }
{ Active: False }
{ Reason: Failed to relocate }
{ }
{ Script: Varrock East Oaks }
{ Time: 09m 39s }
{ Skill: Woodcutting }
{ Exp: 1,012 }
{ Level: 20 }
{ Loads: 1 }
{ Item: Oak logs }
{ Amount: 27 }
{ }
{----------------------------------------------------------------}
{----------------------------------------------------------------}
Yente does it bank those oaks? I can't make it bank anything....It just comes to bank and stands there....
This used to be amazing but now NONE of the yew scripts are working well, could you guys please try and fix them?
Cheer!:D
Really?! I'll try it out later, tyvm for response.. I hope it won't drop the hatchet.Quote:
Originally Posted by Clairvoyance
NP,but tell me after you try it out,does it bank for you.Banking is not working for me at all....and the thread maker doesn't respond....Quote:
Originally Posted by gorouchan
We have lives you know, we aren't your personal scripters. Give us time to fix the issues.
Let me just add that the draynor banker is working now for me ...I don't know if you've changed anything but it's great now!
EDIT : got from level 1 to 75 without getting banned. As this is the first script I ever used I'm very happy :D
is seers village magics working for anyone?
Maybe you should try it for yourself? eh?Quote:
Originally Posted by Afroman444
No, i'm having trouble with it.Quote:
Originally Posted by Afroman444
When I'm running the Draynor village yews script it often fails to go from the bank to the yews, and it does this at random times sometimes it goes ok for an hour or so other times just manages the 1 load.
I'm just wondering if anyone has any solution to this problem, I haven't found anything in this thread while browsing.
I'd also like to know if anyone has any tips for increasing the longevity of this script? is anyone getting more then 2hours when running it and knows how to set it up to be able to reproduce those results?
thanks guys :)
No i just tried it and it didnt work, most of the woodcutting scripts are no good :/Quote:
Originally Posted by Afroman444
now that I think about it mostly every script I use with MSI doesnt work...
kind of disappointed, things used to be different when SCAR was around. the only scripts I have had work for me were HeavyRodder and Bull Universal IvyChopper. everything else takes a dump on me