Special Willow Chopper / Banker [Draynor]

PLEASE POST PROGRESS REPORTS OR ANYTHING YOU COME ACROSS

New Willow Chopper / Banker for Draynor doesn't have a great anti-ban (doesn't auto respond) but I'm working on it but still need some more people to test it.

Works great for me, got it to run for like... 5 Hours without bugging but that was before I added to Progress Report so yea if you want to test it go ahead and please give me lots of feedback.

[V1.1]

Find Trees Faster and avoids Ents better, also banks better with less glitching.
Haven't lost an axe head yet so I don't know if new stuff works, but It should.

[V1.15]

Little more Random... works faster than before.

[New] Problem, If too many people are standing on the bank symbol when it goes to try the bank function it doesn't find it so it continues to try and cut logs, anyone know a good way around this, I was thinking of maybe using a DTM of the bankers and the sides of the bank and make it click in there but I don't think that will work since the MM shifts from time to time.

[V1.5]

Runs smoother and doesn't lag as much, fixed bank problem a little...
Also added status's to see where it was screwing up...

---------Progress Reports---------

Special Woodcutter

Time Ran: 59 Minutes and 56 Seconds
Loads Banked: 11
Ran Away: 4
Ents Avoided: 3
Axes Withdrawn: 1

"Got sent into a maze, didn't have another character to switch too."
--------------------------------------------------------------------

Special Woodcutter

Time Ran: 33 Minutes and 57 Seconds
Loads Banked: 6
Ran Away: 1
Ents Avoided: 2
Axes Withdrawn: 0

"Lost axe head and couldn't find it... I don't know why it couldn't find it."
--------------------------------------------------------------------

Special Woodcutter

Time Ran: 2 Hours 51 Minutes and 32 Seconds
Loads Banked: 24
Ran Away: 8
Ents Avoided: 6
Axes Withdrawn: 1

"Don't know just started wigging out."
--------------------------------------------------------------------

Special Woodcutter

Time Ran: 46 Minutes and 32 Seconds
Loads Banked: 8
Ran Away: 2
Ents Avoided: 2
Axes Withdrawn: 0

"Had to turn it off..."
--------------------------------------------------------------------

Special Woodcutter

Time Ran: 4 Hours 12 Minutes and 52 Seconds
Loads Banked: 46
Ran Away: 17
Ents Avoided: 11
Axes Withdrawn: 3

"Got teleported to Lumbridge Cellar" P.S. Longest Report EVER! YAY!

Looks pretty good to me.

nice one. :]

it works!

but it still needs a lot more work

good job so far

Thanks guys yea I'm working on it right now, working on the anti ban at least but anything you can think of off the top of your head that it needs other than better anti ban?

Oh, and WhiteShadow I applied with this script so if you know think its good umm yea, you know... I could use another yes XD.

i like it :) I have been having some problems with it though. It never banked my logs. My oak chopper also has problems but it's mostly with the SRL NextPlayer thingy.

Thanks I'll keep updating.

Ill post a report for you and any errors i come across.

Version 1.5 isn't working. Error message: Line 424: [Error] (18465:1): Unknown identifier 'ProgressReport'
Edit: I tried moving progressreport above procedure SpecialTree; and it worked.

not working scar say for me:
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

Quote:

---

Originally Posted by erkki

not working scar say for me:
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

---

You sure you have SRL properly installed?

axe finding??? will do proggy now

hi
thes script looks cool i will try it and give u some fedback
best wishes for all

Wow great script! It works very well and always seems to bank the logs. I've noticed one problem with the randoms, however, and it deals with the old man. It seems to solve the boxes pretty well, but if the old man just wants talk to you the bot doesn't respond. Eventually the old man tele's you to the wizard's tower where the bot just shuts down. Any hints on what needs to be done?

its working pretty good im running it now on my other computer ill post progress report after a while......but so far i was watching it and it makes 2 trips to bank b 4 banking


Well version 1.15's banking procedure is working better than 1.5 only in 1.15 randoms got me and was in lumby when i woke up but all in all ive done like 2k willows using your scrips great job
:f: :f:

Time Ran: 14 Minutes and 7 Seconds
Loads Banked: 3
Ran Away: 0
Ents Avoided: 2
Axes Withdrawn: 0

which version works the best?

the newest 1

it works good. well it works grate 8/10 it need random talking to lower randoms.
but it got me a cammo hat. the banking dosent work all that well if u bump an arrow key but it is good. its kind of slow to click the trees it w8s to long to go from tree to tree i will b looking for updates



i support this macro 100%!

I have't tried it yet but it sounds good

How do i use it !!!!!!

I got the scripet but how do i use it

Quote:

---

Originally Posted by bamm bamm 5

How do i use it !!!!!!

I got the scripet but how do i use it

---

read the tuts to learn how to even use scar...and also make sure you have scar installed correctly:duh:

Time Ran: 19 Minutes and 39 Seconds
Loads Banked: 13
Ran Away: 3
Ents Avoided: 0
Axes Withdrawn: 0


Nice :P
tried it on a n00b account but it always dies from the wizards -_-

does this have an anti-jekyll?

Time Ran: 26 Minutes and 17 Seconds
Loads Banked: 23
Ran Away: 1
Ents Avoided: 0
Axes Withdrawn: 0

Nice work man... except i lost 2 rune axes and 1 addy axe lol and when it goes to the bank and clicks the wrong spot it runs back to willows..

I tried the 1.5 version and those are my results:
-Same problem with the wizards, but most time he manages to run away
-Way too slow at finding trees.
-When he loses the axe head he goes to the bank and store the axe handle, instead of finding the axe head.
-When he doesnt bank properly he goes back to willows and search rapidly for some colour
-When a random appeared (some pr*ck with a crossbow =P ) first he run to south like always, then the random folowed him and busted his ***. Instead of getting away again he goes slowly to the trees (RIP) :spongebob:

i dont know how to work the autocutter can u send me a complete version?
my msn is no1_curly@hotmail.com

(send via msn (instantmessaging))

there still problem for the banking..

looks nice ill try it 2 night and post progey in morning

Time Ran: 4 Hours 31 Minutes and 58 Seconds
Loads Banked: 42
Ran Away: 26 // Stupid Black mages.
Ents Avoided: 9
Axes Withdrawn: 2

Heh, ran it while I was in school.
When i came back i found it dead.

thank you m8 im going to try it out now ill edit for progress report


+rep for u ;)

Hey sorry I've been away on vacation I'm I'm going to be leaving again next week I'm working on a new tree finding procedure and fixing banking and randoms... thanks for the support though guys I've just been having some ruff times so thats why I haven't been updating.

Nice, i'll use it tonight!

why doesnt it aviod the ents? version 1.5 plz help =(

Hi people I'm new here when i download ur file i got a little error Include file C:\Program Files\SCAR 3.02\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 3.02\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

how do i use it is says
Include file C:\Program Files\XTZGZoReX\RuneScape MultiHack\Autos\SCAR\includes\SRL/SRL.scar does not exist.

im new to scar and when i tried this script i got this error well i get it with most scripts i try:

Code:

---

Failed when compiling
Line 435: [Error] (2212:24): Unknown type 'PPoint' in script C:\Program Files\SCAR 2.03\includes\srl\srl\core\Math.scar

---

Failed when compiling
Line 322: [Error] (15442:4): Unknown identifier 'FindItemName' in script E:\Ohjelmat\SCAR 2.03\Scripts\SpecialWillowChopper v1.5.scar

help please?

Failed when compiling
Line 25: [Error] (25:1): Duplicate identifier 'UpChars' in script C:\Program Files\SCAR 3.01\includes\srl\srl\core\Globals.scar

wats that plse help on how to fix

Try useing Scar 2.03 untill new srl come out, Also make sure you have setup srl correctly :)
~Stupedspam

im new to autoing... what am i doing wrong? this is what i get...

User specified a new RS window
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 2.03\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

can anyone help me i tryed the script but everytime i do it this shows up...

Include file C:\Program Files\SCAR 3.01\includes\SRL\SRL.SCAR does not exist.
Include file C:\Program Files\SCAR 3.01\includes\SRL\SRL\Skill\Woodcutting.SCAR does not exist.
Failed when compiling

can anyone help