it's really weird you are getting these bugs :/ did you set video settings to minimum and brigtness to max? and fixed screen?Quote:
Originally Posted by ChorizoConWebo
Printable View
it's really weird you are getting these bugs :/ did you set video settings to minimum and brigtness to max? and fixed screen?Quote:
Originally Posted by ChorizoConWebo
K, give me a few minutes, I will run Castle wars banking with dragon bone to see if I get the same problem as you and I will come back with it.Quote:
Originally Posted by ChorizoConWebo
FLAWLESS VICTORY!!:sasmokin:Quote:
Originally Posted by Nemesis3X
tak ethat back..it banks ecto teleport and then stops =(Quote:
Originally Posted by Bobby Booshay
Hello Chorizo, I did change What was screwing up in 7.1 at Castle Wars banking. Hope, this wont happen again. I forgot to revert back the speed of the bot. It was going so fast that it was skipping all the Banking phase and was trying to teleport while Bank screen open, which lead to Banking The ectofial.Quote:
Originally Posted by ChorizoConWebo
I also added a what we call a double failSafe. Before Teleporting, the script now does a double Check to be sure We have our bone and the bank screen is closed before teleporting.
Also, it shouldn't not miss click anymore at the stair1.
Also, Sex you were right, I forget to add anoter findRandom when opening the Trapdoor. As I made many change, Tomorrow I will review all my script to find if I did forget any findrandom anywhere else!
So, the version 7.2 should work for you Chozo now!
sounds great mate :) i will test 7.2 too see if there's any problems with it, although 7.0 is working wonderfull for meQuote:
Originally Posted by Nemesis3X
Thanks. We are back with a 100% stable script now! If any do get some problem, take the time to report it here, so I can fix it.Quote:
Originally Posted by Semtex
Ill test it right away, thanks again man ;)
Sometimes randomly stops and says " We are Ok to collect tokens"Quote:
Originally Posted by Nemesis3X
also randomly tries to find 1st stairs after already going down the stairs and then searches for agility obstaclem and then searches for stair sagain and it goes back and forth
If any have downloaded the version 7.3 before this post, I recommend you download it back because you will have a slow Ectoworship! I uploaded the wrong 7.3 version :P
Fixed, this is a rare one, but it is now fixed!Quote:
Originally Posted by Bobby Booshay
Ya, I got it last night too. My script stopped after 2hours and 57min and when I took a look at the log, it was the same problem as you. So, the problem was that my new DTM was not detected every time when downstairs so the bot was thinking we were still upstairs while we were downstairs. This is fixed!Quote:
Originally Posted by Bobby Booshay
As for now, the version 7,3 has reached the 3 hours Bracket as I am writing this post, so that's why I am posting it now! I am going to college now, so When I come back, I should be able to post a nice proggy report with 6-7 hours with infernal ashes!
Remember, if any do get problem, report it here, so I can fix it! If you get it, there are big chance we will eventually get it too.
Enjoy, 7.3. Remember to give + REP if you like my script :-)
This script is now in way better shape than my series of version 6 which was very stable!
Also, I am 93 Prayer now :-) 2 More lvls or around 15 hours of botting if I count Xp before target lvl / xp/h with Ashes :-)
Perhaps, don't start the bot overnight, since it will be the double Xp weekend!
I don't think you want to wake up and see you already lost 2 hours of your double Xp!
Edit: My script screwed and i lost my 6 hours proggy report... the miss clicking was not fixed and at my big surprise, the script was going really slowly!
I changed the way and if it miss click, it wont click on agility obs anymore, it will try to find the stair again! Perhaps, I brought back the speed of the script. I added something that was slowing the script dramatically :-(
Quick fix for the update 7,4 now!
I went to college myself..computer updated ( restarted) lost a 4 hour proggy :duh: lol was working well before i left thoughQuote:
Originally Posted by Nemesis3X
YOU HAVE DONE IT SIR! I LOG IN TO FIND IT HAS DONE 1K INFERNAL ASHESFOR ME WICH IS ABOUT 250K WHICH IS A LITTLE OVER 4 HOURS OF BOTTING WHILE I WAS IN CLASS! AND IT DID A RANDOM FOR ME! CONGRATS!Quote:
Originally Posted by Nemesis3X
:spot::spot::spot:
Hehe, Welcome in the Club, I started the 7,4 before I went to college and this is where I am actually with my bot right nowQuote:
Originally Posted by Bobby Booshay
********************************************
* Nemesis3X Ectofuntus *
********************************************
* You have Worshiped 1066 Infernal ashes
* You have Gained 266500 Prayer Experience
* You have done 95 trips
* Ran for 3 Hours, 31 Minutes and 53 Seconds
********************************************
This mean 76k xp/hour but the bot did take a break of 30min or so, since I do break every 2-3hours os botting. So it is more like a 80-85k xp/hour right now :-)
uh oh new problem..now it keeps going up and down 1st stairs, gonna restart and try again
ok its good again
good to know, I was affraid to heard my new DTM was not good enough again :-(Quote:
Originally Posted by Bobby Booshay
Side note: I just saw my script doing the pheasant random and going back to work! Just had to pause it and help the antirandom since it was not able to find the forester, so i clicked on it at the place of the script.
Well, my script ended after 4 hours. That's the reason
Simba Code:no more glory
randomly stopped after 2 hours at ecto plasma and kept saying we are ok to collect tokensQuote:
Originally Posted by Nemesis3X
Will be fixed soon, I found the problem while watching my bot doing my works.Quote:
Originally Posted by Bobby Booshay
The tolerance at the Ectopool is not High enought and sometime it failed to find it and the script get confused! it eventually end to a place where you try to collect tokens at Ectopool which lead to a eventual Script end.
ah, im sure you will fix it, ill be hereQuote:
Originally Posted by Nemesis3X
It's fixed!Quote:
Originally Posted by Bobby Booshay
Also, I added a new amazing feature for Stair 1 that will save a lot of time trying to find this damn stair case! Now it looks if we have the uptext right away before trying to find the staircase!
Also, I cut a lot of unused code and it is way easier to read the script now!
Also, SRL5 Have not even been in my script for more than 1 days and we already reach the
1 day, 10:23:00 time used!
Keep using my script! and if any do get 95 Prayer or 99, remember to post it here, you deserve a place in my progress list with me :-)
********************************************
* Nemesis3X Ectofuntus *
********************************************
* You have Worshiped 558 BabyDragon Bone
* You have Gained 66960 Prayer Experience
* You have done 73 trips
* Ran for 5 Hours, 8 Minutes and 0 Seconds
********************************************
Ran pretty well while I was at school ;)
Nice :-) Added your Report in my Report section.Quote:
Originally Posted by ChorizoConWebo
gonna try it, did you fix this thing where it will remove ring and put in invo but wont wear it and then it says no more ring of dueling and stops?Quote:
Originally Posted by Nemesis3X
First time, I heard about this one and I didn't get this problem from the 10+hours testing with the emrald ring Method.Quote:
Originally Posted by Bobby Booshay
Now, I am back to a busy schedule, but I will try to see what I can do and fix this in 1 or 2 days, as I will put all my time playing Runescape for the first few hours to get 90 herblore with a minimal lost :-)
I got a suggestion mate :) to your starting thread, maybe shorten it down, remove all of those updates and progress reports for old releases, and only keep reports and update notes for the released scripts :) makes it alot easier to read :D
Just keep the old updates in a text file incase someone wants to see them
bought some herbs myself..should have 87 herblore tomorrow, have 71 nowQuote:
Originally Posted by Nemesis3X
does this make prayer trainer a lot cheaper? how much does 1M prayer xp cost in infernal ashes with this script?
that's a silly question mate, you can caculate that yourself :)
current price of an infernal ash is 3104 for 250 xp, so thats just 1.000.000 / 250 = 4000 infernal ashes * 12.416.000 gp.
Well, It is way cheaper to train Prayer with Ecto vs Glided!Quote:
Originally Posted by dgpro
Look at these number, you will understand.
if you do ecto 1-99 with infernal ashes it will takes 52,138 infernal ashes
Price = 160M for 99 Prayer.
If you do the Glided way with Dragon Bones which is the most used way!
51,724 Dragon bones for a total of 190M.
You saved 30M from the Mat, but this does not take into consideration the mats and cost that will require you beside crafting which is more expensive than the Ecto!
So At end, there is a difference of 50M between Ecto and Glided which is good enought to consider which side you want!
Edit: Maybe for you 50M is not so impressive, but you can use this 50M to get raise many other skills that you wouldn't if you didn't do Ecto! But ya, the counter part is it takes more time, but who care about this one, You are not playing, it is the bot that do it at your place :-)
But for the first question, how to earn 160m lol. Its really hard.
By the way, how long does it take to get 99pray from 1?
to answer your question with a simple answer, ALOT :D put you can try and caculate it, you get about 70-80k xp/h with infernal ashes, although gilded altar is alot faster xp but not as muchQuote:
Originally Posted by siuman101
Hope you dudes enjoyed your bonus exp weekend, i went from 66 to 86 herblore :spot: also here to post a couple proggys i did today
********************************************
* Nemesis3X Ectofuntus *
********************************************
* You have Worshiped 676 Infernal ashes
* You have Gained 169000 Prayer Experience
* You have done 50 trips
* Ran for 2 Hours, 3 Minutes and 11 Seconds
********************************************
also this one since i had to restart my cpu
********************************************
* Nemesis3X Ectofuntus *
********************************************
* You have Worshiped 845 Infernal ashes
* You have Gained 211250 Prayer Experience
* You have done 59 trips
* Ran for 2 Hours, 41 Minutes and 52 Seconds
********************************************
Considering you lvl up to using infernal ashes. It would takeQuote:
Originally Posted by siuman101
150hours to get 99 Prayer. I bot around 6-10 a days, so after 2-3 weeks you are 99 prayer if you start from lvl 1. Prayer is a fast skill t lvl when you have the money.
How does I get the money, Well, if you are a High lvl, there are plenty of way to get money. I recommend you check the Zybez moneymaking! they share all the possible way to make money in this game with the average GP/H you can afford with this method, but most of my GP I have actually came from when I lvled RC 1 years ago. 94 RC = 200M :-), but now, I have only 20M :-(
Also, added the progress report from Semtex andbobby into my progres report list.
word on that :D heheQuote:
Originally Posted by Nemesis3X
Or, if you used frost dragon bones, it would not take more than 40 hours to get 1-99 considering the 530k exp an hour on a guilded altar.
I gave up and just did them, lol
Hello everyone, This is just a small post to tell you I am happy to announce I am finally done with prayer as I did reach lvl 95 today with my script :-)
Awesome :DQuote:
Originally Posted by Nemesis3X
Hi there, I just wanted to say that I love this script. But it seems to have some problems, at least for me, when it is at the bonegrinder. First, does the machine have to be set to manual or auto? I have tried both. Either way, the script will sometimes not empty the hopper after it has crushed the bones and will go back to add more bones to the machine and then get into a cycle of grinding nothing and trying to add bones to the machine. After awhile it clicks to get the bones out that have been ground up. All I get while this is happening is "Procedure to Fix The Machine Have been Started" and "Trying to find the Ginder". Any suggestions on what I can do here?
Using Version 7.5
The machine need to be on Auto! I recommend using the Machine with only a Cape and Glory as equipement! Try this and come back as it should works now. If you still got problem, I will take further look as I am not using this Script since i am done, but this is my baby, so I want it to stay perfect :-) But I got a big update that is also comming that will increase the rate of the bot.Quote:
Originally Posted by Blackdeath