Smurg's QuickHerblore (Cleans/Unf) ~13k/hr *Fastest*

-= Smurg's QuickHerblore =-

What to expect from this script:

• Quick and dirty (minimal error checks)
• FAST speeds
• Requires user settings tweak

What I expect from you:

• Babysit the script (this is a free release)
• Post Progress Reports
• No complaining in this thread (constructive criticism welcome)

Top Progress Reports (one for each):

Progress Report by BGXD:

____________Smurgs QuickClean V1.00______________

Herbs Cleaned: 4984 (12632 herbs/hr)
Time running: 23 Minutes and 40 Seconds
Time until break: 5 Hours, 17 Minutes and 50 Seconds
_______________________________________________

Progress Report by Smurg:

____________Smurgs QuickHerblore V1.01_______________

Unf Mixed: 17234 (2873 unf/hr)
Time running: 5 Hours, 59 Minutes and 51 Seconds
Time until break: -33 Seconds
_____________________________________________________

Thanks man
I loved this script

great

Herbs Cleaned: 4984 (12632 herbs/hr)
Time running: 23 Minutes and 40 Seconds
Time until break: 5 Hours, 17 Minutes and 50 Seconds
_________________________________________________

Hey smurg nice to see you hear to. I remember you from bots.rs. Thanks for the script. Gona be using it soon

This script is great! The only problem is, it drags, rather than cleans, around half of each inventory. Not sure if it's just my slow computer/fps rates.

Also my first post - I'll try not to leach, I'm going to try and make a very simple script that can cast the string ammy spell.

nice ran for 2 hours

Ran this for around 4-5k herbs, timed manually as the prog reports assumed that all herbs were cleaned in all inventorys, when it was probably close to 60-70% of an inventory being cleaned.

I found it cleaned around 7-8k an hour, still very impressive!

Is this better profit then scroll of cleansing unf? Seen today grimy kwuarms were 200 under clean, so like 200 profit per herb cleaned.

this is so fast it doesnt always clean them, you should tune it down a little

0 and 1 is the first bank slot or is that 1,1 first bank spot as in the sidewards 8

Probably depends on your CPU, the posted settings were cleaning the whole inventory about 80% of the time and the last 20% it would only miss like 2 herbs because of dragging.

I should edit it in with some user-editable settings so you can tweek it for your CPU.

Quote:

---

Originally Posted by dgpro

0 and 1 is the first bank slot or is that 1,1 first bank spot as in the sidewards 8

---

I believe it starts at 0, 0.

Boom, updated to include unfinished potions.

Again, this was meant to be a quick and dirty script (280 lines) while at the computer (I use normal Withdraw() not my custom DTM withdrawal, so if you aren't watching and you run out of materials, it could get funny [although i do shutdown if InvCount < 28 after banking, so it will catch most things]).

(Also it seems on how I did things, you could use it for finished potions too [untested], but I left click the items, so put your unfinished potion as the firstMaterial then.)

Renamed QuickHerblore.

*If a mod could edit title to be "Smurg's QuickHerblore (Cleans/Unf) ~13k/hr *Fastest*" that'd be appreciated, thanks*

isn't there a high ban risk if the bot cleans 11k herbs/hour???

^ Im wondering the same thing, anyone been banned from these kinds of scripts?

Can you make it so if it messes up like can't find bank or doesn't withdraw the other ingredient that it'll find bank again?
Also noticed that it will stop and say no more supplies left. Completely random. Could make 20k of them one time and stops with still 10k left or it could make 2k of them and stop with 20k supplies left.

Quote:

---

Originally Posted by polska94

isn't there a high ban risk if the bot cleans 11k herbs/hour???

---

Haven't even heard of a single ban using any script for p2p after the bot nuke.

Quote:

---

Originally Posted by Adamcoled22

Can you make it so if it messes up like can't find bank or doesn't withdraw the other ingredient that it'll find bank again?
Also noticed that it will stop and say no more supplies left. Completely random. Could make 20k of them one time and stops with still 10k left or it could make 2k of them and stop with 20k supplies left.

---

Use a lower ping world, probably just lag.

wow! totally legit! :p

Quote:

---

Originally Posted by smurg

Haven't even heard of a single ban using any script for p2p after the bot nuke.



Use a lower ping world, probably just lag.

---

How do I use a lower ping world? I don't believe there's a world selecting option in your script. Do I need to find a code myself to put into it to make it able to select a world? Sorry a bit new to simba.

Where it says Smart_server at the bottom of the script. Just set that number to whatever world you want to log into.

The 32nd line from the bottom is the one needing editing.

Quote:

---

Originally Posted by BraK

Where it says Smart_server at the bottom of the script. Just set that number to whatever world you want to log into.

The 32nd line from the bottom is the one needing editing.

---

Didn't work, I changed it and it still just signs in and clicks "click here to play" button without going to the world select.

All it is doing is just standing in the bank, some help would be appreciated

Fixed login issues just want to tell you about the only error that stops the unf. part of the script, if it was fixed the script would run perfectly. It'll only withdraw the vials of waters and then sometimes it'll either misclick or click too fast on the 2nd ingredient so it won't withdraw the herbs. Then it'll sit there with the waters in the inventory and after a set time it'll go to click the x to log out, it'll click it and then quickly the mouse will move to the bank and open it and the mouse will sit over where the x was. If it clicks to fast you could probably make it withdraw 14 instead of all on the herbs and it could fix it.

Quote:

---

Originally Posted by myworld2reign

All it is doing is just standing in the bank, some help would be appreciated

---

Are you at soul wars chest?

Quote:

---

Originally Posted by Adamcoled22

Fixed login issues just want to tell you about the only error that stops the unf. part of the script, if it was fixed the script would run perfectly. It'll only withdraw the vials of waters and then sometimes it'll either misclick or click too fast on the 2nd ingredient so it won't withdraw the herbs. Then it'll sit there with the waters in the inventory and after a set time it'll go to click the x to log out, it'll click it and then quickly the mouse will move to the bank and open it and the mouse will sit over where the x was. If it clicks to fast you could probably make it withdraw 14 instead of all on the herbs and it could fix it.

---

I have never had any withdrawal issues but I could try some failsafes.

I do have the problem of it trying to bank right after trying to logout and i'll be looking into it more.

Quote:

---

Originally Posted by myworld2reign

All it is doing is just standing in the bank, some help would be appreciated

---

Your new here, check the install tut again and make sure everything is updated.
Lazy ass leechers have many issues here :p

May I ask what the requirements are to make unf pots and how much does it make profit?
I got only 1 herblore -_-.

____________Smurgs QuickHerblore V1.01_______________

Unf Mixed: 9254 (2999 unf/hr)
Time running: 3 Hours, 5 Minutes and 7 Seconds
Time until break: 2 Hours, 36 Minutes and 41 Seconds
__________________________________________________ ___
Impressive Proggie only if it were true.

It banks the inventory before it even finishes making all ufin pots on some rounds.
It is only really making 2400 an hour since i only had like 7335 pots at the 3 hour mark.
Pretty good script tho, cus it never stops running :) But it is not the fastest. Sorry :/

Great script Smurg thanks for the release. Makes finished potion's perfectly aswell. I haven't ran into any problem's and have run it on and off for a few day's, basically flawless. Coming from somone that's used every herblore script in the public section, and your's is the only one I still have saved ;).

____________Smurgs QuickHerblore V1.02_______________

Unf Mixed: 9604 (1689 unf/hr)
Time running: 5 Hours, 41 Minutes and 8 Seconds
Time until break: 6 Minutes and 27 Seconds
__________________________________________________ ___

Edit: The reason that it's only 1726 an hour is because it's making finished potion's, makes 2500+ unfin's an hour.

Also, to people complaining about it not cleaning the entire inventory, or only half etc. If you change the Clicking Wait to 25-30, that fixed the problem for me, only missing at max 4-5 herbs an inventory.

I saw some script in the first script section made by Erke, it made unfs and pots flawless :p

The script banked unf potion loads before finishing, so I changed your detection of completion to the ExistsItem function instead. It works much better for me at least.

Line 234:
If ExistsItem(28) Then

I'll post a proggy when it finishes the load.

Editted in proggy:

____________Smurgs QuickHerblore V1.01_______________

Unf Mixed: 1918 (2806 unf/hr)
Time running: 41 Minutes and 1 Seconds
Time until break: 5 Hours, 4 Minutes and 15 Seconds
__________________________________________________ ___

It's nowhere near done, but I'd probably forget.

Holy crap is that an inhuman cleaning path! It usually misses 1 or 2ish, but I can't say I don't respect the speed. After turning up the resource slider to full, it doesn't miss any very often. I also have a decent computer though.

__________Smurgs QuickHerblore V1.01___________________
Herbs Cleaned: 9996 (12887 herbs/hr)
Time running: 46 Minutes and 32 Seconds
Time until break: 4 Hours, 54 Minutes and 45 seconds
__________________________________________________ __
Out of materials
Successfully executed.
<3

Great script, thank you!

Averaging just over 3k unf's an hour and working flawlessly, not made a single mistake

Quote:

---

Originally Posted by Whatmatters

The script banked unf potion loads before finishing, so I changed your detection of completion to the ExistsItem function instead. It works much better for me at least.

Line 234:
If ExistsItem(28) Then

I'll post a proggy when it finishes the load.

Editted in proggy:

____________Smurgs QuickHerblore V1.01_______________

Unf Mixed: 1918 (2806 unf/hr)
Time running: 41 Minutes and 1 Seconds
Time until break: 5 Hours, 4 Minutes and 15 Seconds
__________________________________________________ ___

It's nowhere near done, but I'd probably forget.

Holy crap is that an inhuman cleaning path! It usually misses 1 or 2ish, but I can't say I don't respect the speed. After turning up the resource slider to full, it doesn't miss any very often. I also have a decent computer though.

__________Smurgs QuickHerblore V1.01___________________
Herbs Cleaned: 9996 (12887 herbs/hr)
Time running: 46 Minutes and 32 Seconds
Time until break: 4 Hours, 54 Minutes and 45 seconds
__________________________________________________ __
Out of materials
Successfully executed.
<3

---

Ya i edited mine to bank when not itemexists(28), not sure If I changed the OP to that version yet or not.

I'll check.

Just as an observation and some advice for players who have the scroll of cleansing whilst making Unf's :)

I found that the default 1500ms wait before a InvChange to bank was too fast, as occasional procs of two or three saved ingredients could force a very early bank (Occasionally banking after two or three Unfs are made)

Changing this value to 2200~ or higher has resolved the issue for me, It still seems to occur occasionally at 2000 so I feel this is a safe area to be mixing at.

This will lower your pots/h, Mine is currently 2680 out of a possible 2800, but at least it is making every potion now!


*There are some freak times when I get 3 Procs in a row, this forces a bank but is not an issue*


Thanks for the script :)

Preparing for bxp weekend and this works great! Thanks!

Edit* One thing I changed for the unf potions maker was instead of a wait time, I just made a dtm for the water vial and had it wait until it couldn't find the water vial dtm in inventory, prevents misshaps with lag

Quote:

---

____________Smurgs QuickHerblore V1.01_______________

Unf Mixed: 462 (3160 unf/hr)
Time running: 8 Minutes and 46 Seconds
Time until break: 5 Hours, 41 Minutes and 6 Seconds
__________________________________________________ ___

---

Pasted in version 1.02 that waits until the 28th inventory slot is empty.

Can't believe I didn't realize that solution earlier, a lot easier.

The banking in version 1.02 is quite slow after completing an inventory, can you highlight a changable variable so we can set our own speed or can you increase it? The two second wait after the inventory is complete is incredibly botlike.

Am i right in guessing it can also make finished potions? Like if you do the unf setting and make it use an ingrediant with an unf pot?

____________Smurgs QuickHerblore V1.02_______________

Herbs Cleaned: 5320 (7479 herbs/hr)
Time running: 42 Minutes and 40 Seconds
Time until break: 5 Hours, 45 Seconds
__________________________________________________ ___
Successfully executed.

^ slowed it down abit. from 15 to 35.

Quote:

---

Originally Posted by smurg

Pasted in version 1.02 that waits until the 28th inventory slot is empty.

Can't believe I didn't realize that solution earlier, a lot easier.

---

Only problem with that for me is that I have that dung scroll so sometimes the 28th slot never goes empty, idk if many people use that though

Quote:

---

Originally Posted by ashaman88

Only problem with that for me is that I have that dung scroll so sometimes the 28th slot never goes empty, idk if many people use that though

---

How does the 28th slot never go empty? That would mean you saved every ingredient. I have the dung scroll too and it works perfect. The extra herbs get stored early in the inventory. (Try having the herbs be withdrawn first and the vial of water second.)