Lumbridge Fly-Fisher

http://i.imgur.com/YBsFN6w.png

This script fishes trout and salmon in Lumbridge and uses the EOC teleport for the fastest banking in F2P. You can also choose to drop the fish.

Location:

• Fly-Fishing spots on the west side of the river

Features:

• SixHourFix Support
• Pixelshift fishing detection
• EOC Dropping (will place fish automatically, no setup needed :))
• Deposit Banking
• Spot Switching
• ObjectDTM Area Detection
• Duck-Proof

Instructions:

• Download the custom SPS map from the attachments, and place it in the runescape_other SPS images folder
• Start player at one of the Fly-Fishing spots.
• Have your inventory empty except for feathers which should be in your 1st slot
• Set the 1st XP tracker to the skill Fishing or Total
• Press Run.

Requirements:

• The custom SPS map (attached)
• ODTM include (Get it here: http://villavu.com/forum/showthread.php?p=847813 ) Follow installation instructions from the linked thread.
• Must not have completed the EOC combat tutorial in Lumbridge if you're banking!

Quote:

---

Originally Posted by corrupt16

Seems that upping CPU priority to max on the Smart client seems to help finding the spawns, fixing one of my issues. Maybe you should suggest this as a recommendation on your first post to migrate similar problems.

---

Enjoy, please post any questions, suggestions, ideas, feedback, proggies, or anything else that you want to

Update Log
+V1.0 released

" Lumbridge Fly-Fisher "
So much for that competition ;)
Gz on release :D

Quote:

---

Originally Posted by The Killer

" Lumbridge Fly-Fisher "
So much for that competition ;)
Gz on release :D

---

None of the names were worth 100k ;)

Congrats on the release BMW

Quote:

---

Originally Posted by Gucci

Congrats on the release BMW

---

Thanks :)

Good job BMWxi.

Quote:

---

Originally Posted by Silentcore

Good job BMWxi.

---

Thanks Silent :)

Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba???

Quote:

---

Originally Posted by iETHOSi

Exception in Script: Unable to find file 'ObjectDTM\ObjDTMInclude.simba???

---

Did you install it by following the directions here?:

ODTM include (Get it here: http://villavu.com/forum/showthread.php?p=847813 ) Follow installation instructions from the linked thread.

Let me know if you get it installed fine and it still won't work :)

Followed all steps in the other post, still get the same error. =\

Quote:

---

Originally Posted by iETHOSi

Followed all steps in the other post, still get the same error. =\

---

Could you go to your Simba folder, then look in the Includes folder, and check if there is a folder called ObjectDTM in it?

Quote:

---

Originally Posted by BMWxi

Could you go to your Simba folder, then look in the Includes folder, and check if there is a folder called ObjectDTM in it?

---

No folder with that name, do I make one?

Quote:

---

Originally Posted by iETHOSi

No folder with that name, do I make one?

---

If the installation went well there should be one, but yes, you should make one.

make sure it is called ObjectDTM. Then put the following files inside it:

Once the files are inside the folder, close everything Simba-releated and then follow the installation isntructions from the thread. :)

Quote:

---

Originally Posted by BMWxi

If the installation went well there should be one, but yes, you should make one.

make sure it is called ObjectDTM. Then put the following files inside it:

Once the files are inside the folder, close everything Simba-releated and then follow the installation isntructions from the thread. :)

---

OK, hopefully this works lol.

Now I'm getting this. [Error] C:\Simba\Includes\ObjectDTM\ObjDTMInclude.simba(2: 1): 'BEGIN' expected at line 1

Quote:

---

Originally Posted by iETHOSi

Now I'm getting this. [Error] C:\Simba\Includes\ObjectDTM\ObjDTMInclude.simba(2: 1): 'BEGIN' expected at line 1

---

You definitely shouldn't get that, let me just try my ObjectDTM stuff.

Try these ones, I just tested with them and it works:

@ iETHOSi

Did you do this?

http://villavu.com/forum/showthread....89#post1167389

Quote:

---

Originally Posted by euphemism

I have a new host for the project now, courtesy of [J]ustin. As a result, everyone is going to have to re-download the ObjectDTM.sex extension from the first post, and follow the instructions to install it. Additionally, it is required to do the following:

After downloading and installing the extension, please navigate to the following and make sure it is checked:

ODTM > Settings > Override Update

Then, click on:

ODTM > Update

---

A very small number of changes to the include can be found in the changelog on the first post.

/Double post

---

OK, script loads up fine, now the red cursor is just staying in the top left of the screen. =\

Quote:

---

Originally Posted by iETHOSi

OK, script loads up fine, now the red cursor is just staying in the top left of the screen. =\

---

Are your settings at fixed, max brightness, and safemode?

I'm using this right now so it's definitely working...

Quote:

---

Originally Posted by BMWxi

Are your settings at fixed, max brightness, and safemode?

I'm using this right now so it's definitely working...

---

All working now, brightness wasn't maxed lol. Thanks for all the help and I hope to get 99 fishing on my F2P account with this. :)

Quote:

---

Originally Posted by iETHOSi

All working now, brightness wasn't maxed lol. Thanks for all the help and I hope to get 99 fishing on my F2P account with this. :)

---

No problem, glad everything got sorted :)

Good luck on your 99, if you want to post proggies I'd love to see them! :D

Future urn support?

E: Actually realised this was Lumby only, might be tricky.

Quote:

---

Originally Posted by The Mayor

Future urn support?

E: Actually realised this was Lumby only, might be tricky.

---

Because it deposits the fish at a deposit chest, urns wouldn't really be a good option. At level 70 I get a steady 30k xp/h though, here's a short proggy:

http://i.imgur.com/TdJRtqn.png

Whoops, that should just say Banking Fish, looks like I forgot to change it :p

Quote:

---

Originally Posted by BMWxi

Because it deposits the fish at a deposit chest, urns wouldn't really be a good option. At level 70 I get a steady 30k xp/h though, here's a short proggy:

http://i.imgur.com/TdJRtqn.png

Whoops, that should just say Banking Fish, looks like I forgot to change it :p

---

What are the advantages of botting at Lumbridge as opposed to Barbarian Village? Barbarian Village is closer to the GE for buying feathers.

I also get around 40k XP/hr at barbarian village at those levels.

Its looks really good. Its pretty fast too.
Just a bug, though I think it would have overcome this with out me interfering, was that in the actionbar dropping, it confused the sword color of "sever" the basic attack ability for those of a trout.

Proggy coming up!

===========[] LumbrigeFlyFisher 1,0 []===========
[+] By BMWxi [+] Status: Going to SouthSpot
==============================================
[] Fishing XP Earned: 32840 Per Hour: 36132
[] Salmon Caught: 223 Per Hour: 245
[] Trout Caught: 320 Per Hour: 352
[] Loads: 25 Per Hour: 27
[] Total Time: 54 min 32 sec
==============================================

Quote:

---

Originally Posted by CyberSyringe

What are the advantages of botting at Lumbridge as opposed to Barbarian Village? Barbarian Village is closer to the GE for buying feathers.

I also get around 40k XP/hr at barbarian village at those levels.

---

Lumbridge is closer to the deposit chest, also it uses the free EOC teleport to get there. When I was using Flight's at barbarian village I was getting around 30k banking so I made this one.

Quote:

---

Originally Posted by Lalaji

Its looks really good. Its pretty fast too.
Just a bug, though I think it would have overcome this with out me interfering, was that in the actionbar dropping, it confused the sword color of "sever" the basic attack ability for those of a trout.

Proggy coming up!

===========[] LumbrigeFlyFisher 1,0 []===========
[+] By BMWxi [+] Status: Going to SouthSpot
==============================================
[] Fishing XP Earned: 32840 Per Hour: 36132
[] Salmon Caught: 223 Per Hour: 245
[] Trout Caught: 320 Per Hour: 352
[] Loads: 25 Per Hour: 27
[] Total Time: 54 min 32 sec
==============================================

---

Thanks, I'm glad you like it :) and iirc it should place the fish in the slot itself if it hasn't dropped them properly.

I'm getting an access violation. Just wondering if anyone has ideas on how to fix this.

http://img5.imageshack.us/img5/2484/capturehf.jpg

Uploaded with ImageShack.us

[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(282:145): Invalid number of parameters at line 281
Compiling failed.

im getting this error what should i do?

[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(7 8:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

now this error.

Quote:

---

Originally Posted by yatesy101

[Error] C:\Simba\Includes\SRL\SRL\misc\SmartParams.Simba(7 8:8): Unknown identifier 'RSReady' at line 77
Compiling failed.

now this error.

---

That's because you pressed run while in the SmartParams.simba tab.

Close the SmartParams.simba tab, then scroll to the very top of my script. Change

Simba Code:

{$DEFINE SMART}

to

Simba Code:

{$DEFINE SMART8}

Save it, then press run.

90 to 99 fishing thanks to this script! :D

Awesome script been running for 10 hours now I love you BMW! :D
Will post a proggy when I reach around 15 hours :)

9 hour and 46 min proggy for ya :D
Attachment 21805

Quote:

---

Originally Posted by angelaelikutty

90 to 99 fishing thanks to this script! :D

---

Awesome, thank you for telling me! And grats! :D

Quote:

---

Originally Posted by evoke99s

9 hour and 46 min proggy for ya :D
Attachment 21805

---

Nice, thanks for the proggy!

when walking over bridge it clicks behind the rock any way to make it so it clicks further down the river?

Quote:

---

Originally Posted by evoke99s

when walking over bridge it clicks behind the rock any way to make it so it clicks further down the river?

---

The SPS path would need to be changed a bit, nothing more than that. If I told you the line to change and what to change it to would you be able to do that? :)

Quote:

---

Originally Posted by BMWxi

The SPS path would need to be changed a bit, nothing more than that. If I told you the line to change and what to change it to would you be able to do that? :)

---

should would!
if you could do that id appreciate it!

Quote:

---

Originally Posted by evoke99s

should would!
if you could do that id appreciate it!

---

Go to line 229 and replace

Simba Code:

ToRiver := [Point(161, 205), Point(191, 200), Point(225, 192), Point(255, 190), Point(266, 211)];

with this:

Simba Code:

ToRiver := [Point(179, 194), Point(186, 196), Point(194, 197), Point(204, 194), Point(214, 191), Point(226, 189), Point(234, 188), Point(245, 190), Point(255, 190), Point(268, 190), Point(277, 190), Point(277, 198), Point(272, 203), Point(268, 208), Point(268, 216)];

Quote:

---

Originally Posted by BMWxi

Go to line 229 and replace

Simba Code:

ToRiver := [Point(161, 205), Point(191, 200), Point(225, 192), Point(255, 190), Point(266, 211)];

with this:

Simba Code:

ToRiver := [Point(179, 194), Point(186, 196), Point(194, 197), Point(204, 194), Point(214, 191), Point(226, 189), Point(234, 188), Point(245, 190), Point(255, 190), Point(268, 190), Point(277, 190), Point(277, 198), Point(272, 203), Point(268, 208), Point(268, 216)];

---

testing out ASAP ill let you know how it goes, THANKS! :spot::f:

E: Still wants to click behind that damn rock. Ill see if i can create my own theres gotta be some tutorial on SPS somewhere.

E1: Made my own SPS walk to river points, fourth load and hasn't clicked behind rock, so far so good! makes it look like less of a
bot when it doesn't click behind that rock every time. well anyways if you want here is the SPS walk path i made! (DEFINITELY WORTH A LOOK AT AND MAYBE IMPLEMENTING?)

Simba Code:

ToRiver := ToRiver := [Point(165, 201), Point(206, 197), Point(222, 196), Point(282, 195), Point(266, 218)];

Quote:

---

Originally Posted by evoke99s

testing out ASAP ill let you know how it goes, THANKS! :spot::f:

E: Still wants to click behind that damn rock. Ill see if i can create my own theres gotta be some tutorial on SPS somewhere.

E1: Made my own SPS walk to river points, fourth load and hasn't clicked behind rock, so far so good! makes it look like less of a
bot when it doesn't click behind that rock every time. well anyways if you want here is the SPS walk path i made! (DEFINITELY WORTH A LOOK AT AND MAYBE IMPLEMENTING?)

Simba Code:

ToRiver := ToRiver := [Point(165, 201), Point(206, 197), Point(222, 196), Point(282, 195), Point(266, 218)];

---

Not sure while mine was doing that, nice job on making your own though :)