Printable View
This Script is for Everyone To Grow Do not copy the Entire code and give me credit just because you added a Proggy if you working on it then good! I dont need a proggy added then for it to say that it runs better! My Script was one of the first! I don't Hold anything against it! Credit goes to SRL Community for great Tutorials! They just need to work on TPA Tuts!
Must Have P07_Include! Find Dannys Include!
This is what I've been looking for lol, running is evil. I'll most likely test this out tonight. Thanks!
Gratz on the release! I love seeing scripts come out(:
Anti-leech? will test out soon
i will cry tears of joy if this works well, ill update you!
Nice script, it seems to get ahead of itself (like taking steps before its actually done it so you could be on the same lap for quite awhile) other than that its quite good and has potential to be great.
It's a pretty nifty script (Better than anything I could do, with me being new to SRL)
Like others have said; it's often ahead of itself so it doesn't know exactly which part of the course you're currently on.
There are no failsafes at all. Pretty much unusable.
I started rewriting your script but decided to watch Homeland instead
Lol! I tried to use Fail Safes i just dont know how to! Still Learning! Um if someone could help me I love you! Um other than that I think the script should run without problems! As i said work in progress! Beta!
Good job, very interesting and helpful. Is the 600-1000ms wait time long enough for the pipes? When it's occupied, you have to wait for about 3 seconds I believe.
Yea im working on that fail safe! so if it does click it waits to make sure it goes in before continuing the script!
Seems to always mess up on the balancing rope for me....
Great work on the script, looks like it's going to be great once it's done.
um I updated the times and took some stuff our still working on the pipe!
there must be an anti-leech. gay
This is the easiest anti-leech known to man. If you weren't a leecher, you would know.Quote:
Originally Posted by voltag00
hey fixed ur postQuote:
Originally Posted by voltag00
@OP thanks for making an agility script. Definitely needed!
Thank you Op I learned a lot from this script I'm so inspired to make something now.
A quick question once it finishes the Pipe procedure. the script cannot find the log again. do i have to make another procedure? so it becomes visible to the script? thank you.
Thats the only problem now.
It should find the log just update the color!
what are some things i need to look for anti leech?
Lol, I just noticed the "walk to log" anyways thank you! I updated the color but its still not looping. It just seems to stop after the pipe. :duh: ill see what I'm doing wrong
Ah you beat me too releasing this! I have a working GnomeAgility script that I threw together in the last 2 days.
Release it then? This one has some issues :PQuote:
Originally Posted by SirDub
It's working, but there is 1 minor issue that will cause it to stop every few laps that I want to address, soon!Quote:
Originally Posted by lil str kid
OP is it okay if I can pm you on an issue?
Can anyone lean me towards a fix to the "failsafe" and "walk to log"? I goes through the course well just fails at failsafe and continuing to next log.
i gained like 8 levels testing this haha
Will try tomorrow. Nice release!
Your walktolog procedure doesnt work, but you can basically replace it with
As well as changing the log colour to 6440, this puts it at an angle where it can see the log from where you exit the pipe. You also have to remove theQuote:
procedure WalktoLog;
begin
P07_MakeCameraAngleLow;
P07_MakeCompassWest;
end;
from the log scriptQuote:
P07_MakeCameraAngleHigh;
P07_MakeCompassSouth;
I gave up I made the script work, but there are many misclicks due to the colors. Thank you anyways. I wish i could develop on it.
This keeps getting stuck at the pipe.
Attachment 19421
This is the best I could do, you can make the failsafe work by making the bitmap a picture of the chatbox when it says you failed, with your name in it. It still misclicks but it usually recorrects itself. you also have to restart every couple hours because runescape will slightly change your angle over time, and restarting is the only way to fix it.
did you leave the correct colors? or do i need to change them because my issue was the colorsQuote:
Originally Posted by adamater
Okay guys I did something for the pipe and the DTM Walk Hopefully it will fixthe failsafe thing! umm! Sorry as I said it was beta just to see whats good! Hopefully it works better!
Fuck guys I died might take a while for me to get back to agility area!
thank for the script.Quote:
Originally Posted by Rules of Joe
Also, if you see adamaters script he fixed the "Back to log".
The only thing that is driving me crazy is the ROPE color it keeps missclicking the color! i tried like 10 different numbers but all missclick. 4416898 was good until the second loop and then failed.... ugh rules of joe please provide the color you are using for rope.
I can't get the darn thing to click on anything.. mouse moves but no clicks. Any hints would be nice.
Apple My rope Color isdrag the target onto the client and press play again make sure u click on the client when u press play!Code:6194595
Thanks Rules for the color and instructions.Quote:
Originally Posted by Rules of Joe
ill test beta2 in a while.
Um Do you guys think i should left click instead of right?
It worked great up until the rope then it got stuck, did a loop without actually doing anything ingame then just stood there saying 'Found DTM' until i stopped it, i'll try changing the colour you posted
does brightness change the color codes?
That stubborn rope...
So i added a new code that allows it to search for 2 rope colors
You guys can add as much colors after ropecol,Code:procedure Rope;
begin
P07_MakeCameraAngleHigh;
ropecol := 6063267 Writeln('Walk Rope');
if P07_FindObjCustom(x, y, ['Walk', 'lk-on'], [ropecol, 5799581], 5) then
begin
wait(1000);
ClickMouse2(mouse_right);
wait(randomrange(100, 200));
P07_ChooseOptionMulti(['lk-on', 'cing rop']);
wait(randomrange(600, 1000));
end;
end;
Thanks for telling me to drag the target. =)... its working now, but gets stuck at the end after crawling through pipe... keeps repeating Found DTM after camera movement.