Printable View
Could you fix the stringing please, if it mis clicks on the first invy slot to withdraw x, if it accidentally clicks all it types 14. Happens quite frequent. You could make it withdraw the stuff then string then withdraw item 1 bank strung then withdraw item 2 and wouldn't have x amounts just click all
EDIT: This is probably unreadable I'm super tired.
Please update, I fixed that long ago as far as i'm aware.Quote:
Originally Posted by duke4eva
Honestly this is how stringing should be done. Have it withdraw 14 logs for the first round of stringing, but after it strings the first 14 it should now have 14 strung bows in the invy. next it should withdraw all bow string (which will only allow for 14 to be withdrawn), then it should bank the 14 strung bows from the invy, leaving 14 empty spaces, then right click withdraw all unstrung bows, which again, will withdraw 14. rinse and repeat.Quote:
Originally Posted by duke4eva
This way you never need to type 14, and also this is how most fletchers string, so it would be more human like.
Unless its fixed in 3.1, 3.0 and 2.33 it isn't.
It looks like you fixed with fletching not stringing.
It was working now all of asudden, a tab showed up and it says antirandoms and im getting an error code saying:
Error: Exception: Mask is invalid. Width/Height: (9,6). WhiteHi/BlackHi: (-1,53) at line 780
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
Alright.. another problem with v3.0 beta. Dont know what really. "Loading SMART: http://oldschool6.runescape.com
Error: Out Of Range at line 102
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
[Error] (32339:1): Unexpected end of file at line 32338
Compiling failed."
Unable to find file 'SRL/SRL.Simba'
And i did follow the instructions :(
Thanks
I got it to string the right way without spamming 14, where it strings, then banks withdraws first slots bank strung then withdraws second flawlessly, as I'm about 300k off 99 now. Lolz, wish i could have done earlier. But this script is flawless.
I used both and same errorQuote:
Originally Posted by Lord Waffles
still banks my knife
Please tell me how, it is really breaking my balls when I string at pest control and people start spamming "bot!"
Edit:
NVM! Stringed 500 yew longs without a single 14, it's fixed for me.
Really, thank you for this script, it's flawless.
[Error] C:\Simba\Includes\SRL-OSR/SRL/core/simba.simba(465:14): Unknown identifier '' at line 464
Compiling failed.
Help?
It is bankin my knife alot
Nice script, but how can you disable camera moving?
its moving camera all over around and can't find bank :(
edit: nvm. deleted couple lines and now its working perfect @ Pest control :)
i have newer version but stills banks knife
it compiles and loads then stays with a white screen on smart8.0, any know reason why?
What the heck, it is making magic shortbows allthough I set it up to make longbows!
I do not have support for magics yet, i'm working on an update today to fix a few things and include magics.Quote:
Originally Posted by antondod
I have no idea how, if you could watch for it and tell me when it does that would be greatQuote:
Originally Posted by Neves28
for instance "It's banking the knife when trying to bank the logs" or "It's banking the knife because it failed to close the bank window"
I need to know where it's happening to fix it.
My script just takes out the yew logs and then nothing happens at all, it just waves the cursor around for ages.
No idea, happened to me once, just close and re run script and it'll workQuote:
Originally Posted by 10gez10
Nice script mate, tried this with stringing, was working well
Haven't tried cutting logs yet tho
UPDATE 3.2 NEEDS TESTING, FILE ATTACHED BELOW
This file has not yet been tested by me, which is why it's being posted down here instead of the top
-FIXED : Some users keep saying it banks the knife, though I have never had this issue after I patched it...I still added extra pre-causions.
-CHANGED : Stringing method as requested by multiple users
waffle i will test now if you have skype please pm me it for feedback ! :)Quote:
Originally Posted by Lord Waffles
Does not even bank for me. I have nothing in my inventory but a knife and it doesn't bank. I've set the colors of the bank. But nothing
You are going to have to be a little more detailed than "it doesn't bank",Quote:
Originally Posted by ownuinmysleep
-What version are you using?
-Is there any error messages?
It does not withdraw any logs nor even goes into the bank interface, I'm using your 3.1OCR beta. I've already put in all the user interface and what not.
and no there are no error messages
3.1 beta works great, I would assume something is wrong with your SLR-OSR folder. I don't know what else to tell you, the debugger should at least say something like:Quote:
Originally Posted by ownuinmysleep
Code:Hello, thank you for using Lord Waffles fletching beast!
Please submit all feedback on the forums
You are using version: 3.0 BETA
Attempting to find bank...
Error: Exception: Mask is invalid. Width/Height: (9,6). WhiteHi/BlackHi: (-1,53) at line 780
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
This is what happens when it doesn't bank. The mouse doesn't move whatsoever and it just sits there. i had an empty inventory to start with and it withdrew my logs and fletched a full inventory. but it doesn't bank
3.2 working great thanks
The script seems to have a bit of trouble when attempting to cut magic logs into bows. It withdraws them from the bank correctly but cannot successfully fletch them into Longbows. More specifically, it clicks the knife then fails to click on the log, it then clicks on the log, uses it with the knife and attempts to cut short bows. (Sorted it, for your reference it's Line 335, a coordinates issue, changed it to (390, 417), as opposed to what it was before, although it still messes around when attempting to cut the log).
Edit: Eep! I've been using version 3.0, I'll try out version 3.2 now!
Edit 2: It appears to attempt to find the knife, however it simply hovers over it and sort of "jerks" around, making rapid mouse movements, but not actually clicking. No errors are returned.
This is a great script by the way, I've been using it for a while now!
Now it just started to fully function.. -_- this is really weird. It banks now no problems.
"Unable to find file 'SRL-OSR/SRL.Simba'" I made the SRL-OSR folder and what not, not sure why I'm getting this error? (when trying to start 3.2)
You've got the SRL-OSR folder downloaded, correct?Quote:
Originally Posted by mrmarch
It won't click the logs lol. Uses knife and hovers over logs but won't click em! :(
Flawless
f'ing awesome, you ROCK!!!
I'm stringing bows. It runs fine for awhile but then eventually it always stops with this error:
Attempting to open bank...
Attempt was successful!
Banking Inventory
Withdrawing slot 1 item
Withdrawing slot 2 item
Error: Exception: Mask is invalid. Width/Height: (9,6). WhiteHi/BlackHi: (-1,53) at line 780
The following DTMs were not freed: [SRL - Lamp bitmap, SRL - Book of Knowledge]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Minimap Mask bitmap]
Any idea what this is/how to fix it?
Issues has been posted multiple times now:Quote:
Originally Posted by smitty3
Quote:
Originally Posted by Known Issues and Fixes
Ah thanks for the fast help. I looked but couldn't find anything. I'll look harder next time XD
Waffles,
Has a tough time in PC bank. How can I fix?