Results 1 to 13 of 13

Thread: Gucci's Gold Bracelet's

  1. #1
    Join Date
    Jan 2012
    Location
    Calgary, AB, Canada
    Posts
    1,819
    Mentioned
    5 Post(s)
    Quoted
    120 Post(s)

    Default Gucci's Gold Bracelet's

    Gucci's Gold Bracelet's

    Requirements to run:

    1. Smart V8.
    2. Any Angle SPS.


    Setup:

    1. Must have gold bars and bracelets in same bank tab and visible.
    2. Must do a few manual runs so that when you click on the furnace it automatically knows you want to make gold bracelets.
    3. Must have the mould in your toolkit.
    4. Start with inventory full of gold bars in Edgeville bank.


    Bugs:

    1. None.

    Progress Reports:

    Progress Report:
    ############# Gold Bracelet Crafter #############
    |= Player : Gucci
    |= Time Running : 1 Hours, 0 Seconds
    |= EXP Gained : 32025
    |= XP/H : 32020
    #################################################


    Progress Report:
    ############# Gold Bracelet Crafter #############
    |= Player : Gucci
    |= Time Running : 3 Hours, 17 Minutes and 49 Seconds
    |= EXP Gained : 105000
    |= XP/H : 31846
    #################################################
    Last edited by Gucci; 01-07-2013 at 03:53 AM.
    Current Project: Retired

  2. #2
    Join Date
    Dec 2011
    Location
    Hyrule
    Posts
    8,662
    Mentioned
    179 Post(s)
    Quoted
    1870 Post(s)

    Default

    If you check out my smither - It does a check for if it needs to select the item again (and scroll if necessary). You could copy something like that from it if you want. Basically just a boolean to click on the item when the script starts and each time it relogs. Or do some check when the item screen is up to see if the gold bracelet is selected? Just some ideas, but congrats on release!

  3. #3
    Join Date
    Jan 2012
    Location
    Calgary, AB, Canada
    Posts
    1,819
    Mentioned
    5 Post(s)
    Quoted
    120 Post(s)

    Default

    Quote Originally Posted by Ashaman88 View Post
    If you check out my smither - It does a check for if it needs to select the item again (and scroll if necessary). You could copy something like that from it if you want. Basically just a boolean to click on the item when the script starts and each time it relogs. Or do some check when the item screen is up to see if the gold bracelet is selected? Just some ideas, but congrats on release!
    I did create something like that but I'm still working a few kinks out in it. Thanks I just saw a request for one so I whipped it up
    Current Project: Retired

  4. #4
    Join Date
    Dec 2011
    Location
    Hyrule
    Posts
    8,662
    Mentioned
    179 Post(s)
    Quoted
    1870 Post(s)

    Default

    Quote Originally Posted by Gucci View Post
    I did create something like that but I'm still working a few kinks out in it. Thanks I just saw a request for one so I whipped it up
    Sweet deal. Yeah I had one working, but pretty unstable and never got around to finishing it - haven't looked through it yet, but I assume you are using SPS, how accurate has that been for you here?

  5. #5
    Join Date
    Jan 2012
    Location
    Calgary, AB, Canada
    Posts
    1,819
    Mentioned
    5 Post(s)
    Quoted
    120 Post(s)

    Default

    Quote Originally Posted by Ashaman88 View Post
    Sweet deal. Yeah I had one working, but pretty unstable and never got around to finishing it - haven't looked through it yet, but I assume you are using SPS, how accurate has that been for you here?
    At first i had problems with stability but a few minor failsafes and it's actually pretty quick . Lately SPS has been a but iffy for me but it's really only one point walk paths so I decided to give it a try and it ended up working pretty well out there
    Current Project: Retired

  6. #6
    Join Date
    Dec 2011
    Location
    Hyrule
    Posts
    8,662
    Mentioned
    179 Post(s)
    Quoted
    1870 Post(s)

    Default

    Quote Originally Posted by Gucci View Post
    At first i had problems with stability but a few minor failsafes and it's actually pretty quick . Lately SPS has been a but iffy for me but it's really only one point walk paths so I decided to give it a try and it ended up working pretty well out there
    That's good to hear - I kept having an issue every once in awhile where it would decide to run off to the west like a dummy - but I just may have not made a good enough/big enough area map.

  7. #7
    Join Date
    Apr 2012
    Posts
    365
    Mentioned
    0 Post(s)
    Quoted
    30 Post(s)

    Default

    Where it run? edgeville?

  8. #8
    Join Date
    Jan 2012
    Location
    Calgary, AB, Canada
    Posts
    1,819
    Mentioned
    5 Post(s)
    Quoted
    120 Post(s)

    Default

    Quote Originally Posted by freezeyp View Post
    Where it run? edgeville?
    Yes
    Current Project: Retired

  9. #9
    Join Date
    Feb 2008
    Posts
    5
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    I keep getting this message:
    [Error] C:\Users\Oli!!\Downloads\BraceletCrafter(1).simba( 286:3): Unknown identifier 'SPS_AnyAngle' at line 285
    Compiling failed.
    I have updated all the extenstions manually and it still comes up with it :\
    Anyone have a clue why this is happening?

  10. #10
    Join Date
    Jan 2012
    Location
    Calgary, AB, Canada
    Posts
    1,819
    Mentioned
    5 Post(s)
    Quoted
    120 Post(s)

    Default

    Quote Originally Posted by iwant99mining View Post
    I keep getting this message:
    [Error] C:\Users\Oli!!\Downloads\BraceletCrafter(1).simba( 286:3): Unknown identifier 'SPS_AnyAngle' at line 285
    Compiling failed.
    I have updated all the extenstions manually and it still comes up with it :\
    Anyone have a clue why this is happening?
    It's because you don't have any angle SPS, so your gonna need to update that manually as I don't think it's been pushed yet
    Current Project: Retired

  11. #11
    Join Date
    Feb 2008
    Posts
    5
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    thanks, I downloaded it and extracted to to the right file and forgot to check if the sps update was in a folder lol

  12. #12
    Join Date
    Jan 2013
    Location
    Canada/Quebec
    Posts
    16
    Mentioned
    0 Post(s)
    Quoted
    9 Post(s)

    Default

    Hi there

    I used your script to craft around 60k gold bracelet's. In general it work great! but sometime he just go to the bank and click somewhere random (trying to bank) but miss the banker. I dont know if it could be the sps angle i updated it form this link

    http://villavu.com/forum/showthread.php?t=94113

    But that fail is pretty random it can occur 5 time in a row (i just pause it and get the gold bar before unpause when it occur). Beside i can run like 3 hour and not get any fail

    When he fail he sit right at north wall outside of the bank sometime and in the bank in most time

    Anyways big thanks for the script it's really nice beside that thing that i dont understand yet !!

  13. #13
    Join Date
    Jan 2012
    Location
    Calgary, AB, Canada
    Posts
    1,819
    Mentioned
    5 Post(s)
    Quoted
    120 Post(s)

    Default

    Quote Originally Posted by sam3255 View Post
    Hi there

    I used your script to craft around 60k gold bracelet's. In general it work great! but sometime he just go to the bank and click somewhere random (trying to bank) but miss the banker. I dont know if it could be the sps angle i updated it form this link

    http://villavu.com/forum/showthread.php?t=94113

    But that fail is pretty random it can occur 5 time in a row (i just pause it and get the gold bar before unpause when it occur). Beside i can run like 3 hour and not get any fail

    When he fail he sit right at north wall outside of the bank sometime and in the bank in most time

    Anyways big thanks for the script it's really nice beside that thing that i dont understand yet !!
    Yeah banking function might need a slight update, glad you enjoyed the script
    Current Project: Retired

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •