Page 1 of 5 123 ... LastLast
Results 1 to 25 of 112

Thread: Seers Flax Picker (First script)

  1. #1
    Join Date
    Feb 2013
    Posts
    9
    Mentioned
    0 Post(s)
    Quoted
    3 Post(s)

    Default Seers Flax Picker (First script)

    Hey guys, this is my first script so please excuse it.

    I want to make a fire and nature rune runner, but in order to do that there is a lot of walking to map out. As far as I'm aware this isn't too easy yet in old school, so I decided to start small with this script.

    This script uses DTMs for the bank and flax icons on the minimap, and cords to travel between the areas. This means the script can be unreliable and could get stuck. I recommend babysitting it. I've ran it so far a max of 2 hours straight with no over looking, the randoms were finally laying off me .


    There is little Anti-ban and no random support. There is also an evil autoleech I came up with. If you cannot figure out what it is right away from looking at the script, then please watch the bot through a whole cycle. It's quite easy to remove once you know what it is.

    You set your username and password on lines 50 and 51

    Start in the Flax field, the best spot (for this script) is the most North-Western spot!

    Suggestions:
    If you're getting stuck outside the bank, it means that there are people covering up the bank symbol.
    I suggest switching to a less populated world.

    Known issue:
    It will sometimes walk into the white building between the bank and the flax field. I'm not sure how to definitly fix this.
    Although, this isn't a major issue, just wastes time.

    As I said this is my first script, so I welcome all suggestions! If you have a better method in mind for traveling, please let me know! I couldn't see any good DTMs to set along the way to and from the bank, which is why I used cords.

    I think that about covers everything, enjoy and let me know what you think!

    Script removed by Coh3n due to rules against anti-leech.
    Last edited by Coh3n; 03-25-2013 at 10:09 PM.

  2. #2
    Join Date
    Feb 2012
    Location
    Wonderland
    Posts
    1,988
    Mentioned
    41 Post(s)
    Quoted
    272 Post(s)

    Default

    Good job on a first script.

    If you want a challenge, I'd suggest making ATPA's.
    Otherwise, I'd say implementing failsafes, time outs, etc. would be a sturdy ``next step,'' if you will, towards learning :]

    Cheers,
    Lj

    P.S. congrats again!

  3. #3
    Join Date
    Mar 2013
    Posts
    15
    Mentioned
    2 Post(s)
    Quoted
    6 Post(s)

    Default

    Thanks for the script. I noticed it's a bit slow and goes off track pretty easily. I've had it enter the courthouse and the cemetery with yew tress.

    It seems to have a problem with the bank's roof. If the roof is in the way it's unable to find the bank booth and just walks behind the bank and gets stuck.
    I've also had it walk into the middle of the trees west of the flax farm and get stuck.

    Ditto what LeJingle said.

    By the way, I enjoyed your anti-leach
    Last edited by Orpheus; 03-08-2013 at 09:57 AM.

  4. #4
    Join Date
    Mar 2013
    Posts
    8
    Mentioned
    0 Post(s)
    Quoted
    4 Post(s)

    Default

    EVIL!! My logs noooo!!

  5. #5
    Join Date
    Mar 2013
    Posts
    15
    Mentioned
    0 Post(s)
    Quoted
    7 Post(s)

    Default

    dudee, it dropped my cash watching it lmfao!?

  6. #6
    Join Date
    Mar 2013
    Posts
    5
    Mentioned
    0 Post(s)
    Quoted
    2 Post(s)

    Default

    How do i run the script i am noob at booting i am used to some powerbot automatic shit!

  7. #7
    Join Date
    Dec 2011
    Posts
    2
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    why drop my coins

  8. #8
    Join Date
    Dec 2012
    Posts
    87
    Mentioned
    0 Post(s)
    Quoted
    19 Post(s)

    Default

    Was about to start work on scripting one of these. I'll download and test now, will report back with a report.
    [My ProjectRs06 Scripts]

    Barbarian Powerfisher - Air RuneCrafter

  9. #9
    Join Date
    Mar 2007
    Posts
    5,125
    Mentioned
    275 Post(s)
    Quoted
    901 Post(s)

    Default

    Seems like the 'Coin Dropping' is a anti-leech.

    Forum account issues? Please send me a PM

  10. #10
    Join Date
    Mar 2013
    Posts
    2
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by xwzx01 View Post
    why drop my coins
    lmfao. its called anti-leach

    on topic: great script, walking is sort of buggy but gets the job done. well done man
    Last edited by 12341; 03-08-2013 at 01:54 PM.

  11. #11
    Join Date
    Feb 2013
    Posts
    28
    Mentioned
    0 Post(s)
    Quoted
    16 Post(s)

    Default

    problem is it oversteps the bank every time

  12. #12
    Join Date
    Jul 2012
    Posts
    12
    Mentioned
    0 Post(s)
    Quoted
    2 Post(s)

    Default

    I love the antileech! Glad i found it before I ran the script haha I commented it out because i think i could have fun using it some other time

  13. #13
    Join Date
    Feb 2013
    Posts
    46
    Mentioned
    0 Post(s)
    Quoted
    11 Post(s)

    Default

    The procedure's name kinda gave it away for me

  14. #14
    Join Date
    Feb 2013
    Posts
    28
    Mentioned
    0 Post(s)
    Quoted
    16 Post(s)

    Default

    Quote Originally Posted by killyoulol View Post
    The procedure's name kinda gave it away for me

    This,

    but it runs to the smithing place sometimes whys this?

  15. #15
    Join Date
    Dec 2012
    Posts
    87
    Mentioned
    0 Post(s)
    Quoted
    19 Post(s)

    Default

    I can't work out how to setup smart so just using it on normal rs and the walking is crazy.
    [My ProjectRs06 Scripts]

    Barbarian Powerfisher - Air RuneCrafter

  16. #16
    Join Date
    Mar 2013
    Posts
    40
    Mentioned
    0 Post(s)
    Quoted
    18 Post(s)

    Default

    about to try it out!

  17. #17
    Join Date
    Feb 2013
    Posts
    9
    Mentioned
    0 Post(s)
    Quoted
    4 Post(s)

    Default

    it goes to smithing place and it drops all gold colors stuff -.-''

  18. #18
    Join Date
    Mar 2013
    Posts
    40
    Mentioned
    0 Post(s)
    Quoted
    18 Post(s)

    Default

    Quote Originally Posted by kasrapox View Post
    it goes to smithing place and it drops all gold colors stuff -.-''
    did you fix the anti leech?


    Had the problem where it over shot the bank and ran outside... I wonder if there is a more reliable way than having it find the bank symbol

  19. #19
    Join Date
    Mar 2013
    Location
    York
    Posts
    25
    Mentioned
    0 Post(s)
    Quoted
    5 Post(s)

    Default

    you should fix the DTMs for the bank, all it does waste time but it still gets to the bank somehow :O
    at first I had to babysit to make sure the I removed all the anti-leach...Overall nice job brother

  20. #20
    Join Date
    Feb 2013
    Posts
    28
    Mentioned
    0 Post(s)
    Quoted
    16 Post(s)

    Default

    Quote Originally Posted by itsblown View Post
    did you fix the anti leech?


    Had the problem where it over shot the bank and ran outside... I wonder if there is a more reliable way than having it find the bank symbol

    this atm, I wouldn't even mind it if it used a fixed route back

  21. #21
    Join Date
    Mar 2013
    Posts
    5
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Tyvm brother

  22. #22
    Join Date
    Mar 2013
    Posts
    40
    Mentioned
    0 Post(s)
    Quoted
    18 Post(s)

    Default

    Quote Originally Posted by Wopey View Post
    you should fix the DTMs for the bank, all it does waste time but it still gets to the bank somehow :O
    at first I had to babysit to make sure the I removed all the anti-leach...Overall nice job brother
    I found that even with setting my own bank dtm the script would still miss the bank on its way back. I dont have the knowledge to do so, but if you made the script use the tree logo on the minimap to make its way back to the bank I think it would be much more reliable

  23. #23
    Join Date
    Feb 2013
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    4 Post(s)

    Default

    For some reason, even though I am looking and the DTM is correctly freed. I am getting an error about it, Any idea why? Is there another antiLeech? Because I couldn't find any other DTMs in the script

    EDIT: Just in case anyone that decides to reply to this post knows anything about P07 include, I have been having a problem where it updates and tells me to restart the script but it does that after I restart it as well, (It never actually updates)

    http://puu.sh/2edfd/978907af6e

    ^ Screenshot
    Last edited by buddyrich; 03-08-2013 at 06:41 PM.

  24. #24
    Join Date
    Feb 2013
    Posts
    28
    Mentioned
    0 Post(s)
    Quoted
    16 Post(s)

    Default

    Quote Originally Posted by buddyrich View Post
    For some reason, even though I am looking and the DTM is correctly freed. I am getting an error about it, Any idea why? Is there another antiLeech? Because I couldn't find any other DTMs in the script

    EDIT: Just in case anyone that decides to reply to this post knows anything about P07 include, I have been having a problem where it updates and tells me to restart the script but it does that after I restart it as well, (It never actually updates)

    http://puu.sh/2edfd/978907af6e

    ^ Screenshot
    not sure but make sure you have selected the rs window with the target tool

  25. #25
    Join Date
    Feb 2013
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    4 Post(s)

    Default

    Quote Originally Posted by jaypwns View Post
    not sure but make sure you have selected the rs window with the target tool
    Yeah, I had done that... Still doesn't work

Page 1 of 5 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •