1. ## SlipperyIvy

SlipperyIvy

To get my pet of summer, I made this script. At first I was planning on making a simple script, but it got bigger and bigger. I believe this script is now ready for release. Feedback is always appreciated.

Setup:

1. Setup Simba following this tutorial;
2. Begin in front of ivy;
3. Start the script;
4. Fill in the player form.

Features:

• Antiban
• Fancy paint
• Failsafes
• Break system
• Picks up nests
• Works at all the ivy spots

Proggys:

Changelog:

V1.0
- Initial release
V1.1
- Updated the isChopping() function
- Updated the getNest() function
- Lowered the antiban
- Changed Varrock directions

Last edited by SlipperyPickle; 10-17-2015 at 09:35 PM.

2. @SlipperyPickle what level are you for getting that exp/hour?
edit: I might use it for a while, and I must say I like your proggie. It's clean and simple
REP+

3. Originally Posted by onilika
@SlipperyPickle what level are you for getting that exp/hour?
edit: I might use it for a while, and I must say I like your proggie. It's clean and simple
REP+
Thanks! My woodcutting level is currently 96, going for 99 with this script.

4. Originally Posted by SlipperyPickle
Thanks! My woodcutting level is currently 96, going for 99 with this script.
you could get it faster cutting teaks! And if you have an inferno adze, or a crystal hatchet, even better!

5. Originally Posted by onilika
you could get it faster cutting teaks! And if you have an inferno adze, or a crystal hatchet, even better!
I know, but I like the simplicity of this method

6. SRL Junior Member
Join Date
Mar 2014
Location
East Coast, USA
Posts
291
Mentioned
10 Post(s)
Quoted
148 Post(s)
Trying it out now! I need some good woodcutting XP right now. Will post a proggy soon.

EDIT: @SlipperyPickle;
So here are my findings so far. I think your Varrock settings are backwards? I had to pick Varrock North for it to rotate properly and actually start chopping even though I was at Varrock East. I was also surprised in how many tabs it opened up on its own, I was like WHOA!?! It opened up 10 tabs even though I started at 3. I guess that is the antiban. I don't it is a bad thing, I just thought it was a lot personally. Tomorrow I will have a much longer proggy but so far this got me from 74 to 76 without an issue. Just wish I could have found a bird nest :P

7. SRL Junior Member
Join Date
Jun 2015
Location
New Zealand
Posts
322
Mentioned
2 Post(s)
Quoted
131 Post(s)
Congrats on release

8. Originally Posted by Grimxxdeath223
Trying it out now! I need some good woodcutting XP right now. Will post a proggy soon.

EDIT: @SlipperyPickle;
So here are my findings so far. I think your Varrock settings are backwards? I had to pick Varrock North for it to rotate properly and actually start chopping even though I was at Varrock East. I was also surprised in how many tabs it opened up on its own, I was like WHOA!?! It opened up 10 tabs even though I started at 3. I guess that is the antiban. I don't it is a bad thing, I just thought it was a lot personally. Tomorrow I will have a much longer proggy but so far this got me from 74 to 76 without an issue. Just wish I could have found a bird nest :P

Thanks for the proggy! Tonight, after work, i'll look into the Varrock East part. I'll also change the antiban, so it'll be a bit less.

9. SRL Junior Member
Join Date
Mar 2014
Location
East Coast, USA
Posts
291
Mentioned
10 Post(s)
Quoted
148 Post(s)
Originally Posted by SlipperyPickle
Thanks for the proggy! Tonight, after work, i'll look into the Varrock East part. I'll also change the antiban, so it'll be a bit less.
Let me know when you push an update and I can check it out.

EDIT:

I also get this a lot (usually when it adjusts the camera angle it seems)

Simba Code:
Warning! You passed a wrong ye to a finder function: 720. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.Warning! You passed wrong values to a finder function: ys > ye (720,599). Swapping the values for now.Warning! You passed a wrong ye to a finder function: 720. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.Warning! You passed wrong values to a finder function: ys > ye (720,599). Swapping the values for now.Warning! You passed a wrong ye to a finder function: 720. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.Warning! You passed wrong values to a finder function: ys > ye (720,599). Swapping the values for now.Warning! You passed a wrong ye to a finder function: 720. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.Warning! You passed wrong values to a finder function: ys > ye (720,599). Swapping the values for now.Warning! You passed a wrong ye to a finder function: 720. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.Warning! You passed wrong values to a finder function: ys > ye (720,599). Swapping the values for now.Warning! You passed a wrong ye to a finder function: 720. The client has a height of 600, thus the ye is out of bounds. Setting the value to 599 (h-1) for now.

EDIT2: @SlipperyPickle;
I thought I would post my pretty good proggy.

10. Updated to v1.1, still have to do some minor changes, but trying to finish another script first.

V1.1
- Updated the isChopping() function
- Updated the getNest() function
- Lowered the antiban
- Changed Varrock directions

11. SRL Junior Member
Join Date
Mar 2014
Location
East Coast, USA
Posts
291
Mentioned
10 Post(s)
Quoted
148 Post(s)
Originally Posted by SlipperyPickle
Updated to v1.1, still have to do some minor changes, but trying to finish another script first.

V1.1
- Updated the isChopping() function
- Updated the getNest() function
- Lowered the antiban
- Changed Varrock directions
I am trying this version out now. Hopefully I will actually get a nest over the many hours, haha.

EDIT:

Happy to report that it now picks up nests for me!

EDIT2: @SlipperyPickle; I think colors have been updated for nests? I watched as a nest fell to the ground and was never picked up for some odd reason (The nest had a red egg in it, not sure if that helps). I was at Varrock East (which is working now). Also, I did try Varrock North and after maybe 5 minutes or so found myself upstairs in the castle. Guess it clicked on the stair case that was there.

12. SRL Junior Member
Join Date
Jul 2015
Location
AZ
Posts
103
Mentioned
2 Post(s)
Quoted
56 Post(s)
Just started using this and I must say, I am impressed. It runs very well and takes a minimal amount of effort from the user. Only one thing is bothering me about the script, and it is that you have the wrong break in your progress report! Other than that, this is amazing. I received my first bird egg nest within 5 minutes of turning this on as well

13. SRL Junior Member
Join Date
Jul 2015
Posts
35
Mentioned
4 Post(s)
Quoted
10 Post(s)
Keeps clicking next ivy too fast so it just runs back and fourth.

14. Registered User
Join Date
Oct 2015
Posts
11
Mentioned
0 Post(s)
Quoted
1 Post(s)
nice script

15. 3zx
SRL Junior Member
Join Date
Dec 2011
Posts
150
Mentioned
4 Post(s)
Quoted
46 Post(s)

this is at 76 woodcutting

16. Still working great!

17. SRL Junior Member
Join Date
Jan 2016
Posts
36
Mentioned
0 Post(s)
Quoted
12 Post(s)
For some reason I can't see the progress picture where it says like slipperyivy, time running, time until break, etc. Also when it picks up a birds nest it breaks for me, any tips?