[Osr][Color]elfyyy's Fletcher

[Kyle]

Set up right not working. I have it set to cut 'Yew' logs



Edit: I figured it out!

logsSlot := 0; // Top left bank slot
bowSlot := 1; // Second top left bank slot
stringSlot := 2; // Third top left bank slot //There was no semicolon after the 2! make sure you guys add it for it to work!

Definitely not the problem, as it would have no effect on that. You don't have your logs in the top left inventory slot it appears... It looks to be in slot 1. If not, then I assume you changed brightness or something.

[icode]

Definitely not the problem, as it would have no effect on that. You don't have your logs in the top left inventory slot it appears... It looks to be in slot 1. If not, then I assume you changed brightness or something.

the logs are definitely set up right there...

[Kyle]

the logs are definitely set up right there...

Hard for me to tell when you don't post the entire setup...

[icode]

Hard for me to tell when you don't post the entire setup...

isnt the setup just in bank and knife in inventory at bottom right? I mean the script is working for me now no problem there was a typo in the setup thats all

btw when fletching magics it clicks when making the bow in the middle of the interface when theres only two options for magics (either left or right) just a little thing

[marius1996]

works great but when lvl up it doesn't start fletch agen it just stands there a bit and open bank and start agen.

[I got this]

I hate to be the person posting another setup error (after you said you won't respond anymore) but i've been trying to set it up for the better part of an hour and I can't seem to figure it out. If you could just take look real quick I would be grateful.

simba.png

Also brightness is all the way up and tabs are disabled.

Thanks, ~I Got This

Edit: My inventory is knife, bottom right and that is it. The error, not shown in photo is same as everyone else's (although I believe I have done what you suggested in other posts) is:

Setup of script failed, double check bank slot info
Succesfully freed SMART[5684]
Successfully executed.

The error seems to occur after scrolling over the Logs and upon reaching the longbow (u) in bank.

[megamanxx11]

Hey guys,
I need help;
I set up all my items correctly - Logslot 0, bowslot 2 and stringslot 3 + knife bottom right of inventory. ALL BANK TABS OFF .
Clicked play , the 'Capture(red dot)' goes on the logs, --> bows then goes on strings and nothing happens? .
I get message saying "Setup of script failed, double check bank slot info" .

[megamanxx11]

Hey ,
Im having the same problem lols
Any chance you figured out how to make it work?

[Im New Sry]

Hard for me to tell when you don't post the entire setup...

Can confirm as well.

[Kyle]

Can confirm as well.

You confirmed that you didn't follow the instructions. Logs in slot 0, bows in slot 1, string in slot 2..

[Im New Sry]

You confirmed that you didn't follow the instructions. Logs in slot 0, bows in slot 1, string in slot 2..

Yeah, so my willow logs are in which slot?
I have tried switching places, doesn't work .
I'm trying to do willow bows.

[Kyle]

Yeah, so my willow logs are in which slot?
I have tried switching places, doesn't work .
I'm trying to do willow bows.

Top left is 0, then gets higher to the right. you're not understanding, Your bows need to be in slot 1, strings in slot 2..

[Im New Sry]

Top left is 0, then gets higher to the right. you're not understanding, Your bows need to be in slot 1, strings in slot 2..

Okay, I tried putting my bows in slot 1, I'm not stringing them so should I also have bowstrings anyway?
Here is what it looks like atm



Doing willow longbows (u) manually at the moment, not stringing anything.

Reached 55 Fletching, tried switching Maple Logs to slot 0, still "doesn't detect" the logs. Could it be an issue with the font? Maybe that OCR stuff broke?

[Dan the man]

I just set this up and it is compiling ok and everything, but when it seems to be moving the mouse all over the place. It right clicks on each of the items, then left clicks without choosing something and types 14, then it right cicks on the logs and actually chooses withdraw x, then withdraws 14 and closes the bank, the clicks on the knife and starts moving all around the place and clicks randomly on the screen and types 285, then when it realises its not doing anything, it clicks on the knife again and manages to land on the logs, but isnt able to select a bow type (although it got awful close to choosing short instead of long).

Have i dont something wrong? My Magic logs are in slot 0, magic long (u) in slot 1 and bow strings are in slot 2.

429e87629e.png

4098a1916d.png

Any help is appreciated.

[Im New Sry]

I just set this up and it is compiling ok and everything, but when it seems to be moving the mouse all over the place. It right clicks on each of the items, then left clicks without choosing something and types 14, then it right cicks on the logs and actually chooses withdraw x, then withdraws 14 and closes the bank, the clicks on the knife and starts moving all around the place and clicks randomly on the screen and types 285, then when it realises its not doing anything, it clicks on the knife again and manages to land on the logs, but isnt able to select a bow type (although it got awful close to choosing short instead of long).

Have i dont something wrong? My Magic logs are in slot 0, magic long (u) in slot 1 and bow strings are in slot 2.

429e87629e.png

4098a1916d.png

Any help is appreciated.

Broken script m8, but OP doesn't seem to believe that

[squirrelz]

Setup of script failed, double check bank slot info

  whichBank := 'castle wars'; // See above for locations

  typeOfLogs := 'Maple logs'; //Case Sensitive

  makeShortBow := False; //False makes Longbow
  makeStrungBow := True; //Make strung bow

  logsSlot := 0; // Top left bank slot
  bowSlot := 1; // Second top left bank slot
  stringSlot := 2; // Third top left bank slot

D=

[MaxC69]

Same issue.

gyazo.com/57c0607ea8f0bcff23d02a5c9891a490


gyazo.com/d71d5b5d9cd84e0c7a050adeab18d849

[Itzik]

Script seems to start up well, though I do have bank tabs and it will be troublesome to cancel them just for that(Need to drag each item back and forth afterwards right?).
Can you direct me to the place(number I assume) the script clicks on the client for the log,bow and string?

Thanks

[Rein5]

My setup is perfect but it always says,

Setup of script failed, double check bank slot info
Succesfully freed SMART[173932]
Successfully executed.

Anybody know how to fix this?

[lukecrucitti]

hey good script but could u please add stringing

[Rein5]

hey good script but could u please add stringing

The script works for you? Was it updated recently?

[iriep12345]

| ================================================== =====
| Time Running : 5 Minutes and 23 Seconds
| Status : Failed Banking, Please Report To Thread
| Bow's made : 81
| Logs Left : 1595
|================================================= =========
Succesfully freed SMART[992]
Successfully executed.
cant even close bank...it always clicks under
EDIT: Fixed u need to press setting and press hide tabs.

[sodomyclown]

I don't think stringing is working. Making unfinished bows work but I'm following the proper setup for stringing and it doesn't appear to work.

[liams007]

I don't think stringing is working. Making unfinished bows work but I'm following the proper setup for stringing and it doesn't appear to work.

I second that

[kaalimato1]

So i did how it says in the setup. Still getting this:
of script failed, double check bank slot info
Succesfully freed SMART[173932]
Successfully executed.

Any 1 have any idea how to fix?

Edit: i forgot to mention that i have tried pretty much everything that is in this thread. It just goes once over logs and und-bows and stops.