v1.7 still tries to click on the wood by yanille bank in the walls, thinking it's iron ores. Gonna play around with it a bit. Still struggles on the way back to bank as well :s
antirandoms
better mapwalking
v1.7 still tries to click on the wood by yanille bank in the walls, thinking it's iron ores. Gonna play around with it a bit. Still struggles on the way back to bank as well :s
bug 9.jpg
After first trip to bank it ended up here
But Like I thought it walked back to mine couldnt mine then walked back to bank and on the 2nd trip it banked gunna keep testing it.
Also still mining at the rocks at the top of the mine where theres 2 spread out. But Im not complaining.
3rd Trip went without any problems. I like it already the best version so far!
Last edited by holmant33; 05-29-2013 at 04:44 PM.
also some more advise. if you could add it where when your walking back from bank you toggle run on it would be another anti ban!
Also the 3rd trip to mine it went to the bottom mine with 3 rocks! Liking it allot man! I might not even have to babysit!
Ok 5th trip hit a snag bug 10.jpg This is where it stopped! and did nothing after that dont know why. Anyways will start again and see if it happens again.
All in all it works flawless 4 trips then 4th trip does that bank problem where it clicks 1 spot above the bank or stops in the middle of the traveling back and forth. But on another note it is the best script youve had so far.
ok so did a good job for 3 trips then run off course and says its at the bank when it obviously isnt ill leave something in more detail soon.
seems like these guys above me hit it right on the head same issues here it pretty repetitive
walking to the pit
could not find dtm: 2
could not find dtm: 3
found dtm: 4
found dtm: 5
found mining site
getting Iron spot
WestKevin12`s Yanil Iron Banker V1.7
TimeRunning: 13 minutes |Loads: 4
Ore Per Hour: 478 |Total Ore: 108
XP Per Hour: 16738 |Total XP: 3780
WestKevin12`s Yanil Iron Banker V1.7
TimeRunning: 13 minutes |Loads: 4
Ore Per Hour: 594 |Total Ore: 135
XP Per Hour: 20820 |Total XP: 4725
found mining site
tpa walk point 1
tpa walk point 2
tpa walk point 3
could not find dtm: 7
could not find dtm: 8
could not find dtm: 1
found the bank
could not find the banker
walking to the pit
could not find dtm: 2
could not find dtm: 3
found dtm: 4
found dtm: 5
found mining site
getting Iron spot
WestKevin12`s Yanil Iron Banker V1.7
TimeRunning: 14 minutes |Loads: 5
Ore Per Hour: 564 |Total Ore: 135
XP Per Hour: 19756 |Total XP: 4725
WestKevin12`s Yanil Iron Banker V1.7
TimeRunning: 14 minutes |Loads: 5
Ore Per Hour: 676 |Total Ore: 162
XP Per Hour: 23679 |Total XP: 5670
found mining site
tpa walk point 1
tpa walk point 2
tpa walk point 3
could not find dtm: 7
could not find dtm: 8
could not find dtm: 1
found the bank
found mining site
getting Iron spot
WestKevin12`s Yanil Iron Banker V1.7
TimeRunniOre Per Hour: 815 |Total Ore: 216
XP Per Hour: 28558 |Total XP: 7560
found mining site
didnt actually bank a single load
WestKevin12`s Yanil Iron Banker V1.7
TimeRunning: 17 minutes |Loads: 3
Ore Per Hour: 270 |Total Ore: 81
XP Per Hour: 9476 |Total XP: 2835
Used it for a few inventorys, thanks for the program!
For Some reason i get the error:
Exception in Script: Unable to find file 'srl-osr/srl.simba' used from 'C:\Simba\Scripts\Westkevin12sYanillIronBankerV1.7 .simba'
Can you, or anybody help me?
NVM, i fixed it
Last edited by g4genocide; 06-05-2013 at 06:36 PM.
you still working on this? it would be so cool
There was an update today, not too sure what it was. But I was running your script and once RS updated I reloaded smart and redid everything, but there is a serious problem with the walking pattern, it keeps clicking on an island north of the mine, and basically just keeps bugging out.
been running this for awhile, works alright
but, after a few trips i get stuck a little north west of the bank and script becomes unresponsive.
i have to manually walk back to mining pit and restart the script.
Not sure if this is an error on my end? I'm new
ALSO TO NOTE [edit]: Running should be turned off, it messes it up.
Last edited by JKLO; 06-14-2013 at 03:34 PM.
:] :]
Last edited by JKLO; 06-14-2013 at 05:52 PM. Reason: replied wrong.
Great script, worked well for 60 mins. (Default time setting)
Here's my proggy:
WestKevin12`s Yanil Iron Banker V1.7
TimeRunning: 63 minutes |Loads: 12
Ore Per Hour: 333 |Total Ore: 351
XP Per Hour: 11675 |Total XP: 12285
it starts it, goes to the mining spot
doesn't walk to bank says it found the spot ( in chat )
[Hint] C:\Users\Lenovo\Downloads\Westkevin12sYanillIronBa nkerV1.7.simba(63:3): Variable 'X' never used at line 62
[Hint] C:\Users\Lenovo\Downloads\Westkevin12sYanillIronBa nkerV1.7.simba(63:3): Variable 'Y' never used at line 62
[Error] C:\Users\Lenovo\Downloads\Westkevin12sYanillIronBa nkerV1.7.simba(111:17): Unknown type 'TDTMPointDef' at line 111
Compiling failed.
That is what your script is giving me. Could you explain what this means and how I can fix it?
same error
[Hint] C:\Simba\Scripts\Westkevin12sYanillIronBankerV1.7. simba(63:3): Variable 'X' never used at line 62
[Hint] C:\Simba\Scripts\Westkevin12sYanillIronBankerV1.7. simba(63:3): Variable 'Y' never used at line 62
[Error] C:\Simba\Scripts\Westkevin12sYanillIronBankerV1.7. simba(111:17): Unknown type 'TDTMPointDef' at line 111
Compiling failed.
There are currently 1 users browsing this thread. (0 members and 1 guests)