Page 1 of 3 123 LastLast
Results 1 to 25 of 72

Thread: ~~ Tim0's Buy'N'Light! ~~

  1. #1
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    ~~ Tim0's Buy'N'Light! ~~

    Tim0's Buy'N'Light
    By: Tim0Suprem0

    THIS SCRIPT IS OUTDATED! FEEL FREE TO USE ALL/ANY OF THE CODE IN YOUR OWN SCRIPTS AS I DO NOT PLAY RUNESCAPE ANYMORE




    VERSION 1.35 IS OUT!

    Starts at Varrock West Bank and walks to General Store where it buys the logs of your choice and then burns them!




    SETUP: Start in West Varrock Bank at any of the first 3 bankslots with Tinderbox in your first inventory space and your money in the second. Then select which type of logs to burn and how many loads to do per player


    Proggy (mine):

    Code:
    []-----------Tim0's BuyNLight----------------[]
    Worked For : 2 hours 8 Minutes and 27 seconds
    Complete Loads Done : 25
    Logs Burned : 650
    Estimated Money Spent : 8112
    Switched Worlds : 0 Times
    g***** is Broke
    []--------------------------------------------[]
    By Submersal:
    Code:
    []-----------Tim0's BuyNLight----------------[]
    Worked For : 1 Hours, 20 Minutes and 32 Seconds
    Complete Loads Done : 13
    Logs Burned : 361 Willow
    Estimated Money Spent : 4332
    Switched Worlds : 0 Times
    ******* is Lost
    []--------------------------------------------[]

    V1.3 updates

    -little bit of Anti-ban

    -FIXED: SRL stats

    -Minor tweaks (progress report, script speed, etc.)

    V1.2 updates

    -World Switcher works 90%+ of them time

    -Better Proggies

    -Dynamic DDTM treefinding

    -Detects if you're out of money and changes players

    -Better burning technique

    -Replaced Flag with FFlag

    -SRL Stats!

    -FIXED:No longer gets lost after finding the incorrect anvil symbol





    Known problems:






    Future updates:

    -Forms!

    -A Lumbridge BuyerLighter!







    Credits To:

    -JAD for his awesome Tuts

    -SantaClause for proofreading/help editing

    -WT-Fakawi and Tarajunky for procedures/ideas in script

    -masquerader's RunDesktopProgram which helped me with my WorldSwitcher procedure

  2. #2
    Join Date
    Jun 2007
    Location
    ENGLAND
    Posts
    220
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    WHAT IF THERE ARE NO LOGS IN THE GENERAL STORE?

  3. #3
    Join Date
    Nov 2006
    Location
    NSW, Australia
    Posts
    3,487
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    What if you just post something nice, not in caps...

    Good work Timo...
    [CENTER][img]http://signatures.mylivesignature.com/54486/113/4539C8FAAF3EAB109A3CC1811EF0941B.png[/img][/CENTER]
    [CENTER][BANANA]TSN ~ Vacation! ~ says :I Love Santy[/BANANA][/CENTER]

    [CENTER][BANANA]Raymond - Oh rilie? says :Your smart[/BANANA][/CENTER]

  4. #4
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Quote Originally Posted by exppo View Post
    WHAT IF THERE ARE NO LOGS IN THE GENERAL STORE?
    just check beforehand.... its not that hard lol, if your REALLY lazy then run the script and stop it after it walks to store

  5. #5
    Join Date
    Jun 2007
    Location
    England
    Posts
    262
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Cool, I'll test sometime soon, I'm making a new army atm

  6. #6
    Join Date
    Apr 2007
    Location
    The Netherlands
    Posts
    5,553
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    lookst nice but i dont gonna test it srry
    if you need help with changeworld problem then go to scar misc and go to worlswitcher
    ~Hermen

  7. #7
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Thanks hermpie And I'll probably be updating as soon as I go to my mom's since the treefinding has been really weird lately, and a couple other little things to hopefully clean it up.

  8. #8
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Ok just changed the treefinding a little, still a bit unreliable as I did a quick fix, but should work better now. Please redownload

  9. #9
    Join Date
    Jul 2007
    Posts
    10
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by tim0suprem0 View Post
    Ok just changed the treefinding a little, still a bit unreliable as I did a quick fix, but should work better now. Please redownload
    It goes to the varrock center and then it says "no trees found" and then goes bank to the bank and log out, wtf.

  10. #10
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Quote Originally Posted by Cdexswzaq555 View Post
    It goes to the varrock center and then it says "no trees found" and then goes bank to the bank and log out, wtf.
    Wtf is right, how are you going to quote me saying REDOWNLOAD and then still use the older version that doesnt work and get mad about it?

  11. #11
    Join Date
    Jul 2007
    Posts
    6
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    i have been testing but cant get it to work the most i got was 4 fire...it seems to click to fast and always wonders off to random spots

  12. #12
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Hmm it works fine on mine, and was public chat set to friends? BEcause then it just waits for 'you succesfully lit a fire' in the chatbox before starting the next log. I'll look into it as soon as I'm back from camp, maybe the DTM is bad or something.

  13. #13
    Join Date
    Jan 2007
    Location
    Oztralia
    Posts
    86
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    this works good just that I think you could save alot of time if instead of everytime it says you cannot light a fire here and it runs back to the general store it should check if you have any logs in your inventory and then if so go back and try to light fires again

  14. #14
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Executioner, thats a good idea, so if for some reason it cant light it just goes back to general store and if there are still logs to be burned, goes back to the middle and burns them again? I'll put that in the next update now that I'm back home.

  15. #15
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Code:
    []-----------Tim0's BuyNLight----------------[]
    Worked For : 31 Minutes, and 22 Seconds
    Loads Done : 7
    Logs Burned : 154
    ******* is at Bank
    []--------------------------------------------[]
    This was with makecompass and setchat fixes that I did myself, but it worked pretty well. I only spent 3k on the logs.

  16. #16
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    VERSION 1.1 Out!!!

    And it's like 100x better

  17. #17
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Now Compatible with SRL 4.0!

    Plus a few other things:

    Added FTWait, only counts as a full load if youve burned 26 logs so you dont get incomplete loads, standards.

  18. #18
    Join Date
    Jun 2007
    Location
    In my computer room
    Posts
    148
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Thanks for updating it Tim0. Now i have to update my cokefiller script. as soon as im done with my varrok project anyways. Looks good glad you updated it.

    Edit: I just ran it. I got 1 load done FLAWLESSLY, but then it went to general store and bought 5 bronze kite shields. Lol. Ya so i stopped it maybe you should update the DTMs?

  19. #19
    Join Date
    Nov 2006
    Location
    Latvia
    Posts
    53
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Works fine! But i suggest fix buying procedures, because it`s sometimes buy incorrect things and burning procedures there is errors! But with me its works like 20 minutes, only then starts errors.
    http://www.fenjer.com/adnan/SRL/21/5...0by%20JaBa.png -Full Version Be Ready Soon, Free Version Is out If Anyone wanna try, then MSN me
    http://www.fenjer.com/adnan/SRL/9/3/...d%20Runner.png
    http://www.fenjer.com/adnan/SRL/14/5...0Collector.png - After Tutorial Island Runner Finishing...

  20. #20
    Join Date
    Aug 2007
    Posts
    11
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Well:

    first trip went well, bought some bronze kites also :P, i would recomm DTM and remember the slot in the shop, The burning is unnatural. On higher levels it's terribly slow.

    without the bronze kite bug i'd say it's quite good =)

  21. #21
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Hahaha I got the bronze kite thing this morning, sorry guys! I'll have DTM fixed by tomorrow, hope you like armoring your army

    @mihkel and drnewheart
    What logs were you using? I want to know if it's just one DTM or all of them, because it might be a tolerance thing, which is really easy to fix.

    @kodeejs
    what were the burning errors? Since the burning is the most important thing pretty much, can you tell me what went wrong? The problem I had was off axis clicking with the new SRL so it would like click like 100 pixels off and just completely mess up, but I know not everyone is having SRL problems.


    Thanks for the feedback! Hopefully once SRL is bug free I'll get some proggies

  22. #22
    Join Date
    Jun 2007
    Location
    In my computer room
    Posts
    148
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by tim0suprem0 View Post
    Hahaha I got the bronze kite thing this morning, sorry guys! I'll have DTM fixed by tomorrow, hope you like armoring your army

    @mihkel and drnewheart
    What logs were you using? I want to know if it's just one DTM or all of them, because it might be a tolerance thing, which is really easy to fix.

    @kodeejs
    what were the burning errors? Since the burning is the most important thing pretty much, can you tell me what went wrong? The problem I had was off axis clicking with the new SRL so it would like click like 100 pixels off and just completely mess up, but I know not everyone is having SRL problems.


    Thanks for the feedback! Hopefully once SRL is bug free I'll get some proggies

    It was with Willow logs. It probably is a tolerance thing just reduce the tolerance and maybe add
    SCAR Code:
    If (IsUpTextMulti('ill','ow','ogs')) then Buylogs;
    That way the bug is fixed REALLY easy.

  23. #23
    Join Date
    Feb 2007
    Posts
    27
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    hey im gettin this..

    Line 709: [Error] (13215:8): Unknown identifier 'Loads' in script

    probably some nooby error, easy to fix but just thought id let u know..

  24. #24
    Join Date
    Aug 2007
    Posts
    11
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Same, i was using willows also.

  25. #25
    Join Date
    Oct 2006
    Posts
    1,071
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Ok, sorry for the hold up! I'll reduce tol (it's really high if I remember right because I was accidently playing on low brightness) on the DTM's and make it search for text.

    I'm going to my mom's house tonight, so I'll do it in about 6 hours.



    @rdk
    WOW I AM DUMB lol, until I update tonight, turn line 709 from
    SCAR Code:
    until (Loads > (LoadsToBurn+random(3)-1));

    to

    SCAR Code:
    until ((Burned/26) > (LoadsToBurn+random(3)-1));

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •