Fr0zN_S0uL's Multi-Tree Chopper Banker~Dropper

[FrÕzÑ_§ÕµL]

OK vry sorry. I guess I'll change back to the FindRS I'm using, so yea very VERY sorry!

[supadude]

ok dw about it its not a big deal i can still auto on 3.12

[awesom]

line 1053: Invalid number of parameters...

? ? ? ?

Since it was only in proggy I deleted the line and it runs now.

[X Gilli X]

Hey man. Excellent script, BUT for me, when it cuts the willows, it laggs me really bad. Everything runs very smooth untill it clicks on the willow tree, then theres about 3-5 second lag delays. I used the Oak, and it didn't lag for me then. Why does it only do it to the willows, you know?

[FrÕzÑ_§ÕµL]

line 1053: Invalid number of parameters...

? ? ? ?

Since it was only in proggy I deleted the line and it runs now.

Then you are not using SRL 7, they have just changed it. For under SRL 7 add ,false in the function where it had the error. I believe it is here:

For SRL rev7+:
RXPNextLevel := XpTilNextLevel('woodcutting');

For SRL <rev7:
XPNextLevel := XpTilNextLevel('woodcutting', false);

Hey man. Excellent script, BUT for me, when it cuts the willows, it laggs me really bad. Everything runs very smooth untill it clicks on the willow tree, then theres about 3-5 second lag delays. I used the Oak, and it didn't lag for me then. Why does it only do it to the willows, you know?

Wow that is weird? Make sure your using firefox first, but I guess you are.
In my next release I am adding this to the end of the CheckForRandoms procedure, so I'll give it to you now in order to hopefully help you:

  Wait(10);

Real complicated, ay lol Try that out, I think it may help more than you realise lol, if it doesn't help, try Wait(50) or (100). I woudln't go much higher than that or it will start affecting all the procedures

[awesom]

I don't know why but it doesn't find bank or walk to trees I walked it to norms then it cut them and walked back to bank and didn't go inside and couldn't find booth and autochatter thing typed half and didn't press enter.. ?

[FrÕzÑ_§ÕµL]

I don't know why but it doesn't find bank or walk to trees I walked it to norms then it cut them and walked back to bank and didn't go inside and couldn't find booth and autochatter thing typed half and didn't press enter.. ?

lmao well that is ragged as. Try and stick to willows, they are the only 100% working banker. As I have just edited in the first post:

Current Status:
100% Delete and remake of all bankers!

It says more, you should go read it, I change it quite alot.

[awesom]

OK Cool, I thought I would try it instead of ChopYBank but both this and ChopYBank have its +'s and -'s =P

Ents and getting new axe when axe breaks or logging out in ChopY is quite bad but it cuts and banks norms, oaks and willows very nicely.

[supadude]

i deleted everything 3.13 uninstalled like 5 times (wtf?) then redownloaded reinstalled etc it was wierd but i finally got it and srl back up and running

but it still hangs on login with your script :S

so yeah im trying to use chopYbank but its multiplayer doesn't work for me after it does set amount of loads on one character it logs out and stays logged out

[FrÕzÑ_§ÕµL]

i deleted everything 3.13 uninstalled like 5 times (wtf?) then redownloaded reinstalled etc it was wierd but i finally got it and srl back up and running

but it still hangs on login with your script :S

so yeah im trying to use chopYbank but its multiplayer doesn't work for me after it does set amount of loads on one character it logs out and stays logged out

Then its obviously happening with both of our scripts, so duh you got problems! OK go to Login.scar in your folder. Go to LoginPlayer and Find this:

  x := 150;
    y := 173;
    if (FindRS) then
      ActivateClient;
    Wait(1000);
    ClickOption('Cancel', 1);

Change it to

  x := 150;
    y := 173;
    Wait(1000);
    ClickOption('Cancel', 1);

If that doesn't work then I have no idea what is wrong because that fix should 100% work.

[X Gilli X]

Still seems to lag after I add the wait function. Tried 50, and 100, still lagged... :S

[FrÕzÑ_§ÕµL]

Dam well that does suck

Don't believe I am capable of making an awesome banker? Check this Report with my new Oak banker (5 players cutting oaks):

() (=================================================)
() (= Fr0zn S0uls Multi-Tree Chopper Banker~Dropper =)
() (= fr0zn *****'s Report
() (=================================================)
() (= Gained 0 Levels out of 0 Total Levels
() (= 8992 XP To Level 66 Woodcutting
() (= Done 26 of 105 Total Loads (3 Players Still Active)
() (= Script Running For: 5 Hours, 44 Minutes and 2 Seconds
() (=================================================)

Nearly 6 hours and I've only lost two players! LMAO still no levels gained though my players are too good.

[X Gilli X]

Well its all good.. You got me from 1-60 all by autoing in a few days so I pretty happy with that + the logs for around 60 FM too.

Much appreciated,

Gilli

[FrÕzÑ_§ÕµL]

Well its all good.. You got me from 1-60 all by autoing in a few days so I pretty happy with that + the logs for around 60 FM too.

Much appreciated,

Gilli

Haha wow cool I'm glad it worked so great for you My guys are from 70 - 85 now, but thats over quite a long time

Update on Oak (2.5) Report:

() (=================================================)
() (= Fr0zn S0uls Multi-Tree Chopper Banker~Dropper =)
() (= fr0zn *****'s Report
() (=================================================)
() (= Gained 0 Levels out of 1 Total Levels
() (= 65508 XP To Level 74 Woodcutting
() (= Done 41 of 147 Total Loads (3 Players Still Active)
() (= Script Running For: 8 Hours, 9 Minutes and 52 Seconds
() (=================================================)

[richk1693]

It works for me but it's super laggy. When it click the tree the uber lag begins.

[FrÕzÑ_§ÕµL]

Well that is a shame, I'm going to be asking the other members what could be causing this, and trying it on my mums computer once I finish the bankers, then everyone will be able to use the awsomeness of this script XD

[[S]paz]

yer it used to happen to me to.... the scar cpu usage shoots to 99%... i found if u changed the priorities on firefox.exe in task manager to above or high.. then the lag is gone!!!

spaz hope that helps

[FrÕzÑ_§ÕµL]

Indeed thank you spaz, I was going to mention that but then I wasn't sure if that actually helped I'll think about putting that in the first post.

Sorry that 2.5 is taking so long but as they say, Good Things Take Time, and this is a very good thing, so it's taking tons of time I'm spending all my time on it lmao, but then only one (two) banker(s) left and you guys can love me hehe!

[awesom]

Ooo GL hope it all goes well and cant wait to see the update

[[S]paz]

back before srl4 this script got 6 chars from 20-60-ish so im waiting lol this is an pwnage script GL

spaz

[FrÕzÑ_§ÕµL]

Thank you for the luck guys, I'm gonna need it I'm making the oak banker at two oaks right now, and I've made the script so that if there is no tree around, you will not try to find a non existent one. Why is this so important? You won't get banned! I have made this script with very high priority to anti-ban, as you can see from my sig! Not a single black mark, on any char, after all the testing I've been through

[mnagi85]

I've seen lvl 3 autoers autoing willows and banking, they're not dying lol.

I am interested in being pmed with the new script release, thanks.

Trying this script out now.

[FrÕzÑ_§ÕµL]

No, your right, its very hard to find the location of the bankers on the first post on the first page!

However, in 2.5 I am going to be making the script start from the bank anyway, this saves all the confusion and means I don't have to make budget instructions using paint

OK you are on the mailing list, I hope you enjoy the current version

Script update: Finished off willow, tree and oak bankers. Oak now banks at place with 4 trees XD. Just perfecting them, and will have the new version of the script by wednesday I am hoping, if the yews don't give me too much trouble lol (if they are anything like the oaks, i'm not gonna have a fun few days hehe)

Have fun anyway guys

[mnagi85]

I received this error while compiling:
Line 1053: [Error] (16234:45): Invalid number of parameters in script C:\Users\Mohammed Nagi\Desktop\Multi-Tree Chopper Banker~Dropper [v2.4] l Fr0zn S0ul(2).scar
Failed when compiling

I was using Scar 3.12c SRL 4 Rev #7

[jez]

) (=================================================)
() (= Fr0zn S0uls Multi-Tree Chopper Banker~Dropper =)
() (= jez's Report
() (=================================================)
() (= Gained 0 Levels out of 1 Total Levels
() (= 36701 XP To Level 79 Woodcutting
() (= Done 34 of 66 Total Loads (1 Players Still Active)
() (= Script Running For: 4 Hours, 52 Minutes and 30 Seconds
() (=================================================)

/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
|     SRL 4 Randoms Report     |
|                              |
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
| SRL Logs         :         8 |
| Fights           :         7 |
| Talks            :       138 |
| Ricks            :         1 |
| Old Men          :         3 |
| No Sandwiches    :         3 |
| Capn Hand[s]     :         1 |
| Boxes Solved     :         3 |
\~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/