Page 1 of 2 12 LastLast
Results 1 to 25 of 33

Thread: Macro_FTW's Hide Tanner

  1. #1
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default [SRL #35][R]Macro_FTW's Hide Tanner

    Acclaimed to not be able to find the DTMs easily. Don't use until v1.3 is uploaded. Thanks.
    Current version: 1.2

    Hey all. This is my first released script!

    It's a hide tanner. Based in Al Khraid.

    Features:
    • Multiplayer
    • Antirandoms
    • Antiban
    • Autoresponding
    • DDTM Walking
    • Failsafes
    • Run compatability
    • 3 methods of finding the tanner
    • ATPAs
    • Progress reports
    • Multi-hide support. Can go from cowhides to blue d'hides to any other hide [minus snake] without any trouble at all. No changes needed.
    • 100% SMART compatible. Just take out a // and it's completely set up to use SMART.
    • Reflection is optional. The script resorts to regular procedures [[DDTMs, TPAs, etc.]] if it fails.
    • Resting when run energy falls below 20ish.


    Any suggestions, bugs, proggies, etc. feel free to post.

    Script is attached.
    ~Macro_FTW

    !Notice:! There are a few bugs that I'm having with this script; using the Dev version of SRL, and its ChooseOption, is sometimes slightly inaccurate to the point of choosing the wrong action. I have made as many failsafes as I can for this, and so this script shouldn't be inhibited much by this. Thank you for your understanding.

    Required SRL: Dev revision 146
    Tested In: SCAR 3.21 Beta, rev 20

    Version History:
    1.2 - Major bugfixes, more failsafes added.
    1.1 - Added resting when you're under 20ish run energy. Overall sped the script up.
    1.0 - Added a version checker and reflection. Reflection is 100% optional and backed up by DDTMs and TPAs as necessary.
    0.9B - First version of the script.
    Code:
    Current Version:  1.2
    1.1 - Downloaded 2 times
    1.0 - Downloaded 11 times
    0.9B - Downloaded 7 times
    Last edited by Macro_FTW; 07-25-2009 at 01:23 PM.
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  2. #2
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    [[Sorry for the double post]]

    Planning on adding quite a bit to this script for version 1.0. In 2-4 hours, I plan to have the updated version up.

    ~Macro_FTW
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  3. #3
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    [[Triple Post, whee. >.>]]

    Updated. Reflection is now the primary method of walking/finding the tanner. However, DDTMs and TPAs are still used in spots and always back up the reflection.
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  4. #4
    Join Date
    Feb 2009
    Location
    Irvine, CA
    Posts
    2,873
    Mentioned
    8 Post(s)
    Quoted
    138 Post(s)

    Default

    money per hour on this? thanks

  5. #5
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by TomTuff View Post
    money per hour on this? thanks
    Depends on the hide type; I'll test it when I get back, but I'd guess 1,500+ hides/hour, which should be around 75k/hour on Cow Hides, and 300-400k/hour on dhides.
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  6. #6
    Join Date
    Feb 2007
    Location
    Access Violation at 0x00000000
    Posts
    2,865
    Mentioned
    3 Post(s)
    Quoted
    18 Post(s)

    Default

    Maybe add resting when run ene is <20? Works good on my smelter.
    Ce ne sont que des gueux


  7. #7
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by Floor66 View Post
    Maybe add resting when run ene is <20? Works good on my smelter.
    Alright. I'll look in to that when I go to release my next version. Thanks!

    (Currently really busy irl, so the next version won't be out for a while. Sorry. :/)
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  8. #8
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    UPDATED.

    Added resting when run energy < 20ish, as suggested by Floor66. Thanks!

    ~Macro_FTW
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  9. #9
    Join Date
    Feb 2007
    Location
    Access Violation at 0x00000000
    Posts
    2,865
    Mentioned
    3 Post(s)
    Quoted
    18 Post(s)

    Default

    Ah great This is a real help.
    Some people might think that it takes too long but that greatly compensates with the time you'd else have to walk normally.
    Ce ne sont que des gueux


  10. #10
    Join Date
    May 2007
    Location
    knoxville
    Posts
    2,873
    Mentioned
    7 Post(s)
    Quoted
    70 Post(s)

    Default

    ill test this out tonight, fo sho

    i cant test till then
    <TViYH> i had a dream about you again awkwardsaw
    Malachi 2:3

  11. #11
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    says i have no money.
    and reflection doesnt work

  12. #12
    Join Date
    Apr 2008
    Location
    Marquette, MI
    Posts
    15,252
    Mentioned
    138 Post(s)
    Quoted
    680 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    says i have no money.
    and reflection doesnt work
    Be a little more specific, rather than saying "reflection doesn't work".

    Does it give an error? Does it just not walk to the specified point? Beging more specific would really help out Macro.

  13. #13
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    says i have no money.
    and reflection doesnt work
    I'll look in to the no money part; ensure that you have it in your inventory, please.

    Really? Have you updated your hooks?

    EDIT: Please see Coh3n's post as well. Telling me exactly what doesn't work (for ref) helps out a lot. Thanks.
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  14. #14
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    here's the reflection problem"
    Code:
    Line 661: [Error] (22030:58): Type mismatch in script C:\Program Files (x86)\SCAR 3.20\scarprerelease\includes\SRL\SRL\Reflection\Characters.Scar
    i have money in my inv and it just says player has no money

    this is using scar 3.21 and latest dev srl and latest reflection

  15. #15
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    here's the reflection problem"
    Code:
    Line 661: [Error] (22030:58): Type mismatch in script C:\Program Files (x86)\SCAR 3.20\scarprerelease\includes\SRL\SRL\Reflection\Characters.Scar
    i have money in my inv and it just says player has no money

    this is using scar 3.21 and latest dev srl and latest reflection
    The reflection problem is in the Reflection folder itself; not my script. I'm afraid you have to wait on that until a fix is issued. Sorry. :/

    And thanks for the bit about the money; I'll look in to it right away.
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  16. #16
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    Quote Originally Posted by Macro_FTW View Post
    The reflection problem is in the Reflection folder itself; not my script. I'm afraid you have to wait on that until a fix is issued. Sorry. :/

    And thanks for the bit about the money; I'll look in to it right away.
    at first i thought the money problem was being caused because i had 100k in my inv which turned the text white, but then i changed it to under 100k and still got the same problem

  17. #17
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    I tested it; the money works fine for me, both in SMART and out of SMART. I'll look in to the function to be sure, though. :/
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  18. #18
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    i think the money problem has to do with the game tabs

    EDIT: i got it to work without SMART, but now it can't find my green dragonhide
    Last edited by sk80rdie76; 07-17-2009 at 09:13 AM.

  19. #19
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    i think the money problem has to do with the game tabs

    EDIT: i got it to work without SMART, but now it can't find my green dragonhide
    I'm using green as well; getting the hides works fine for me.

    I think I'm going to do a more thorough bugtest for this version to ensure that everything's working as it should. I've found an extra bug or two myself, so I'll release a newer (better working ) version in a few hours.

    Sorry for the inconvenience.
    ~Macro_FTW
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  20. #20
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    Quote Originally Posted by Macro_FTW View Post
    I'm using green as well; getting the hides works fine for me.

    I think I'm going to do a more thorough bugtest for this version to ensure that everything's working as it should. I've found an extra bug or two myself, so I'll release a newer (better working ) version in a few hours.

    Sorry for the inconvenience.
    ~Macro_FTW
    alright, hopefully you can get it to work

  21. #21
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    alright, hopefully you can get it to work
    Thanks.

    !Updated!
    -Bugfixes
    -For me, at least, the ChooseOption procedure in the Dev SRL (rev 146) is slightly off at times, resulting in the wrong options chosen at times (Talk to, instead of Trade, etc.). So, I have placed failsafes in for those in the script.

    It's been tested with 500 Green D'hides, and ran without failing (...past the point of being saved, anyway. )

    Of course, if you have any bugs whatsoever, please feel free to let me know; I'll fix them ASAP!


    ~Macro_FTW
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  22. #22
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    Code:
    You do NOT have the most current version of this script.
    You may go to the following address to download the newest version.
    http://macroftwscripts.googlecode.com/svn/trunk/Versions/Hide%20Tanner.txt
    Current version is: 1.1
    Successfully executed

  23. #23
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    Code:
    You do NOT have the most current version of this script.
    You may go to the following address to download the newest version.
    http://macroftwscripts.googlecode.com/svn/trunk/Versions/Hide%20Tanner.txt
    Current version is: 1.1
    Successfully executed
    Ah, I feel smart now. I put the url in the wrong place.

    Fixed. Thanks. XD
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

  24. #24
    Join Date
    Oct 2006
    Posts
    313
    Mentioned
    0 Post(s)
    Quoted
    13 Post(s)

    Default

    Code:
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using shirt...
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Looking for tanner...
    Using shirt...
    Didn't work. Trying another approach...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    Looking for tanner...
    Using shirt...
    Looking for tanner...
    Using skin...
    Didn't work. Trying another approach...
    Using shirt...
    Didn't work. Trying another approach...
    Using hair...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Looking for tanner...
    Using skin...
    Looking for tanner...
    Using skin...
    Didn't work. Trying another approach...
    Using shirt...
    Didn't work. Trying another approach...
    Using hair...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Didn't work. Trying another approach...
    Using shirt...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    thats what i get using SMART and without, it does it after it has already clicked trade, and it just sits in the window that pops out to tan the hides then clicks away and repeats

  25. #25
    Join Date
    Jan 2007
    Location
    Nomming bits in your RAM
    Posts
    385
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by sk80rdie76 View Post
    Code:
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using shirt...
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Looking for tanner...
    Using shirt...
    Didn't work. Trying another approach...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    Looking for tanner...
    Using shirt...
    Looking for tanner...
    Using skin...
    Didn't work. Trying another approach...
    Using shirt...
    Didn't work. Trying another approach...
    Using hair...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Looking for tanner...
    Using skin...
    Looking for tanner...
    Using skin...
    Didn't work. Trying another approach...
    Using shirt...
    Didn't work. Trying another approach...
    Using hair...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    Looking for tanner...
    Using hair...
    Didn't work. Trying another approach...
    Using skin...
    Didn't work. Trying another approach...
    Using shirt...
    Didn't work. Trying another approach...
    Couldn't find Ellis... :(.
    thats what i get using SMART and without, it does it after it has already clicked trade, and it just sits in the window that pops out to tan the hides then clicks away and repeats
    Really? The InTannerScreen (function to see if we're in the screen it keeps running out of) works 100% of the time for me. Are you at rev 20 with the new SCAR and 146 with the Dev rev?

    And, with that, I must say good night. I have quite a bit to do tomorrow, and it is 2 AM here. Sorry. :/

    Thanks for putting up with the long, dreary bugtesting process (and me) for today, though. It's appreciated.

    ~Macro_FTW
    Current Project: Catching up. XD. Potentially back for the summer, depending on how things go.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •