|ECS| Edgeville Clay Softener - Revamp

**ShowerThoughts** · 08-02-2009, 06:13 PM

Hey, so I revamped it.
Actually not a revamp, because I have rewritten it from scratch.

Have fun leeching!

I put it back up, I don't play rs afterall...

**cycrosism** · 08-02-2009, 06:15 PM

Nice script!! That DDTM might need some tolerance wont it?

**ShowerThoughts** · 08-02-2009, 06:16 PM

It runs around the clock, so it's fine

.
The banker color is static.

**cycrosism** · 08-02-2009, 06:21 PM

Still you should add like 3 tolerance or something

**ShowerThoughts** · 08-02-2009, 06:24 PM

Originally Posted by cycrosism

Still you should add like 3 tolerance or something

It never failed in walking for me, for the months I am using it; so I won't.

**pl0xmypl0x** · 08-04-2009, 02:32 AM

Hi id like to try the script but it keeps copy and pasting it really weird so can you please add an atachment with it in?

Thanks!

**ShowerThoughts** · 08-04-2009, 02:48 AM

Added

!

**Pure1993** · 08-04-2009, 03:51 AM

Originally Posted by pl0xmypl0x

Hi id like to try the script but it keeps copy and pasting it really weird so can you please add an atachment with it in?

Thanks!

Try using firefox or chrome or something... it only messes up with the Internet Explorer.

Anyway, got some nice code there Hermen. Too bad my clay softener (reflection) is even faster (or used to be... not able to test atm), but since this is color based, they are not playing in the same league. Good Work mate.

**ShowerThoughts** · 08-04-2009, 05:30 AM

Originally Posted by Pure1993

Try using firefox or chrome or something... it only messes up with the Internet Explorer.

Anyway, got some nice code there Hermen. Too bad my clay softener (reflection) is even faster (or used to be... not able to test atm), but since this is color based, they are not playing in the same league. Good Work mate.

*cough* bragging *cough*
Nah, I just wanted to release something

.

**pl0xmypl0x** · 08-07-2009, 08:38 AM

its good but it keeps ending early and it says

PROBLEM: inv interface not open
PROBLEM: inv interface not open

its good but its stopping me from running it for long times

also i have watched it as it does this and the inv is open and it just sits at the bank doing nothing

**ShowerThoughts** · 08-07-2009, 05:51 PM

I check for DTM's frequently if you minimize maximize scar it will lag, later on it will revamp itself but it might get lost in a loop of clay softening or bucket filling.
Just minimize it and it can run overnight.(I know when to minimize and maximize <3)

**Pure1993** · 08-15-2009, 10:56 PM

################################################## ##########
#ECS 1.0 - Edgeville Clay Softner. #
#Thank you for using my script Please post proggy's and bugs.#
################################################## ##########
#Script Time = 32 Minutes and 55 Seconds #
#Total Loads Done = 43 #
################################################## ##########
#User ## Total Loads ## Soft Clay Made ## Active #
#hail ## 43 ## 590 ## True #
################################################## ##########

<3

**ShowerThoughts** · 08-23-2009, 05:01 PM

I fixed some stuff and put it back up!!!!
It can now also use bought buckets of water.

**lolislol** · 08-30-2009, 05:07 AM

################################################## ##########
#ECS 1.0 - Edgeville Clay Softner. #
#Thank you for using my script Please post proggy's and bugs.#
################################################## ##########
#Script Time = 2 Hours, 20 Minutes and 45 Seconds #
#Total Loads Done = 191 #
################################################## ##########
#User ## Total Loads ## Soft Clay Made ## Active #
#*** ## 191 ## 2674 ## True #
################################################## ##########

EDIT: Still running, might implement a break system myself, so it would be a bit safer to run for long periods.

EDIT2: P.S Ownage script btw, fast and reliable!

**ShowerThoughts** · 05-03-2010, 03:17 PM

Originally Posted by lolislol

################################################## ##########
#ECS 1.0 - Edgeville Clay Softner. #
#Thank you for using my script Please post proggy's and bugs.#
################################################## ##########
#Script Time = 2 Hours, 20 Minutes and 45 Seconds #
#Total Loads Done = 191 #
################################################## ##########
#User ## Total Loads ## Soft Clay Made ## Active #
#*** ## 191 ## 2674 ## True #
################################################## ##########

EDIT: Still running, might implement a break system myself, so it would be a bit safer to run for long periods.

EDIT2: P.S Ownage script btw, fast and reliable!

Does it still works? Yes, I have no accounts to test this by myself.

**Nose Smasher** · 05-03-2010, 06:16 PM

I might have to release my updated Varrock Clay Softener...

I'll take a look through your script when I get the time, I have a few accounts with some clay on them so I'll give it a go.. (assuming it still works)

**MylesMadness** · 05-03-2010, 07:43 PM

Originally Posted by nose_smasher

I might have to release my updated Varrock Clay Softener...

I'll take a look through your script when I get the time, I have a few accounts with some clay on them so I'll give it a go.. (assuming it still works)

NO! I just started a clay softener because I saw there were none...

**Nose Smasher** · 05-04-2010, 07:17 AM

lol fine i'll keep mine to myself for now..

**Rizowski** · 05-09-2010, 11:59 PM

This is what i got after trying to run this script. :/ ?

Code:

Line 198: [Hint] (1228:1): Variable 'A' never used in script C:\...\SCAR\includes\SRL\SRL\Core\Mouse.scar
Line 198: [Hint] (1228:1): Variable 'B' never used in script C:\...\SCAR\includes\SRL\SRL\Core\Mouse.scar
Line 198: [Hint] (1228:1): Variable 'C' never used in script C:\...\SCAR\includes\SRL\SRL\Core\Mouse.scar
Line 36: [Error] (22582:1): Identifier expected in script C:\...SCAR\Scripts\Runescape\ECS - Edgeville Clay Softner.scar

Above errors were fixed after I checked for SRL update.

Line 38: [Error] (22582:1): Duplicate identifier 'Status' in script C:\...SCAR\Scripts\Runescape\ECS - Edgeville Clay Softner.scar

**i luffs yeww** · 05-10-2010, 12:09 AM

That's because this script is old.

http://goo.gl/kiot

^ Fix'd. If you don't want this posted, then I can take it down, Hermen.

And no promise it'll work, all I did was make it compile.

**Rizowski** · 05-10-2010, 02:02 AM

Haha alright thanks!

**ShowerThoughts** · 05-10-2010, 07:23 PM

Originally Posted by nose_smasher

I might have to release my updated Varrock Clay Softener...

I'll take a look through your script when I get the time, I have a few accounts with some clay on them so I'll give it a go.. (assuming it still works)

Originally Posted by MylesMadness

NO! I just started a clay softener because I saw there were none...

Originally Posted by nose_smasher

lol fine i'll keep mine to myself for now..

I was just asking if it was still working xD!

Originally Posted by i luffs yeww

That's because this script is old.

http://goo.gl/kiot

^ Fix'd. If you don't want this posted, then I can take it down, Hermen.

And no promise it'll work, all I did was make it compile.

thanks!

Originally Posted by moae3

Haha alright thanks!

no problem post proggies please!

**weequ** · 05-10-2010, 09:32 PM

Does this use smart?

**Frement** · 05-10-2010, 09:35 PM

Originally Posted by antti mies

Does this use smart?

SCAR Code:

program ClaySoftner;
{.Include SRL/SRL/Misc/SMART.Scar}

So the answer is: YES

Thread: |ECS| Edgeville Clay Softener - Revamp

Thread Tools

|ECS| Edgeville Clay Softener - Revamp

Thread Information

Users Browsing this Thread

Posting Permissions