Page 15 of 28 FirstFirst ... 5131415161725 ... LastLast
Results 351 to 375 of 680

Thread: UltraSteel Heater +CoalBag avg 85k mage xp/ph

  1. #351
    Join Date
    Dec 2011
    Posts
    17
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Hey I been tryin to do addy but it doesnt work. Everything starts up fine, logs into rs, opens bank but doesnt withdraw anything. Stuck in a loop of opening and closing bank.

    I know for a fact that this script works, i done maybe 30k steel bars already, works well except the lvl up bug. Not sure why this is happening, set up is the same as steel except addy ore in bank slot 1 instead of iron. Any ideas? I really wanted to do addy, steel bars to 99 takes way to long

    Also, this all worked on the 'UltraSteel CoalBag Heater quick fix' script. When I try the other ones, it doesnt work. Is that the latest script or is there a better one with a fix?

    Proggy from steel bars here, just to show that it does work properly:

  2. #352
    Join Date
    Dec 2011
    Posts
    7
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    "Error: Exception: Access violation at line 86
    The following DTMs were not freed: [SRL - Lamp bitmap, 1]
    The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap]"

    This my fault?

    Edit: Nevermind i figured it out.

    Edit: Proggy Great script man!

    [--------------- Cru!z!ns Steel Smelter --------------]
    [ Ran for 2 Hours, 36 Minutes and 35 Seconds]
    [Magic xp : 129267 ]
    [Magic : 49532 Mage XP/Hr ]
    [Smith : 15887 Smith XP/Hr ]
    [Profit : 18691 Gp/Hr ]
    [Profit Made : 48780 ]
    [Bars made : 2439 ]
    [Debug none ]
    Last edited by Def1led; 12-29-2011 at 05:34 PM.

  3. #353
    Join Date
    Dec 2011
    Posts
    484
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    [--------------- Cru!z!ns Steel Smelter --------------]
    [ Ran for 21 Minutes and 55 Seconds ]
    [Magic xp : 25758 ]
    [Magic : 70516 Mage XP/Hr ]
    [Smith : 22618 Smith XP/Hr ]
    [Profit : 1330 Gp/Hr ]
    [Profit Made : 486 ]
    [Bars made : 486 ]
    [Debug: none ]

    A forester random appeared. The bot just sat there. I disabled SMART and solved it. It would be useful to make it so that after re-enabling SMART the bot would start again. I think some failsafes would be how to do it, but I don't know how.

  4. #354
    Join Date
    Nov 2008
    Posts
    19
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by Grihmm View Post
    [--------------- Cru!z!ns Steel Smelter --------------]
    [ Ran for 21 Minutes and 55 Seconds ]
    [Magic xp : 25758 ]
    [Magic : 70516 Mage XP/Hr ]
    [Smith : 22618 Smith XP/Hr ]
    [Profit : 1330 Gp/Hr ]
    [Profit Made : 486 ]
    [Bars made : 486 ]
    [Debug: none ]

    A forester random appeared. The bot just sat there. I disabled SMART and solved it. It would be useful to make it so that after re-enabling SMART the bot would start again. I think some failsafes would be how to do it, but I don't know how.
    I was thinking about this and it's got to be a problem with SRL because once it goes into the procedural for solving the random the scripter has no control at all. In my experience, the best thing to do is just kill the script, solve the random, then start it up again.

  5. #355
    Join Date
    May 2007
    Location
    England/Liverpool
    Posts
    1,004
    Mentioned
    9 Post(s)
    Quoted
    106 Post(s)

    Default

    sadly for some reason my choossOption isn't working no idea why it was no its not gonna look around on forums see if i can solve this.
    I have a update ready just need ChooseOption working

  6. #356
    Join Date
    Dec 2011
    Posts
    124
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by CRU1Z1N View Post
    sadly for some reason my choossOption isn't working no idea why it was no its not gonna look around on forums see if i can solve this.
    I have a update ready just need ChooseOption working
    Simba Code:
    ChooseOption('option');
    or
    ChooseOption(varName);
    It should work.

  7. #357
    Join Date
    May 2007
    Location
    England/Liverpool
    Posts
    1,004
    Mentioned
    9 Post(s)
    Quoted
    106 Post(s)

    Default

    i know how rofl its just not choosing the option

  8. #358
    Join Date
    Dec 2011
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    I'm getting this
    Warning! You passed a wrong ys to a finder function: -5. That is below 0, thus out of bounds. Setting the value to 0 for now.
    Warning! You passed a wrong xs to a finder function: -16. That is below 0, thus out of bounds. Setting the value to 0 for now
    It just goes to my 8th tab and 9th tab(even though i tried taking them off or putting iron ore and coal in their place) and hovers over it repeating those 2 messages.
    Can anyone help me?
    EDIT:Figured it out, It was that I had to close the bank, after I entered the pin.
    Last edited by EuphoriaRush; 12-29-2011 at 04:52 PM.

  9. #359
    Join Date
    Dec 2011
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Lightbulb

    First post ever ftw:

    I tried using this script with mithril bars and coalbag, but it fails

    It withdraws 9 mithril ores and rest coal, after that it clicks superheat, BUT it keeps clicking the first coal ore :/

    It did a few invents manually, this is what I think is the fastest way:

    Starting invent:
    1st slot coalbag and 2nd slot nature runes (stays the same)
    and in the last slot (bottom right) an urn (I use smelting urns, highest f2p)
    Starting spellbook:
    miscellaneous spells turned OFF, rest turned ON.

    1) Full invent coal to fill coal bag
    2)10 mithril ores
    3)Rest coal (again withraw all)
    4)last mithril ore is in the same spot as the spell, so just click 10 times
    5) 1-4 again
    6)1-4 again, but only superheat 5 (smelting urn is full after 25 bars)
    let it bank and take out a new one, since the inventory is still full it will go to the same spot.
    7)repeat.. Note that the next urn will be full after two more banks.. (5+10+10)

    Would you consider updating the mithril bar method?
    Thanks

  10. #360
    Join Date
    Dec 2011
    Posts
    26
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by Nvidia9300 View Post
    First post ever ftw:

    I tried using this script with mithril bars and coalbag, but it fails

    It withdraws 9 mithril ores and rest coal, after that it clicks superheat, BUT it keeps clicking the first coal ore :/

    It did a few invents manually, this is what I think is the fastest way:

    Starting invent:
    1st slot coalbag and 2nd slot nature runes (stays the same)
    and in the last slot (bottom right) an urn (I use smelting urns, highest f2p)
    Starting spellbook:
    miscellaneous spells turned OFF, rest turned ON.

    1) Full invent coal to fill coal bag
    2)10 mithril ores
    3)Rest coal (again withraw all)
    4)last mithril ore is in the same spot as the spell, so just click 10 times
    5) 1-4 again
    6)1-4 again, but only superheat 5 (smelting urn is full after 25 bars)
    let it bank and take out a new one, since the inventory is still full it will go to the same spot.
    7)repeat.. Note that the next urn will be full after two more banks.. (5+10+10)

    Would you consider updating the mithril bar method?
    Thanks
    Will be slower than the current one

  11. #361
    Join Date
    Dec 2011
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by GreenZombie View Post
    Will be slower than the current one
    How so? :/ How can the 9 ore method be faster then the 10 ore method?

    And I can't get the original mithril ore + coal bag method to work, thats why i posted this I have to use the non coal bag method with 5 ores/ invent instead...

  12. #362
    Join Date
    Dec 2011
    Posts
    99
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    my longest run:


    [--------------- Cru!z!ns Steel Smelter --------------]
    [ Ran for 4 Hours, 39 Minutes and 57 Seconds]
    [Magic xp : 270883 ]
    [Magic : 58056 Mage XP/Hr ]
    [Smith : 18621 Smith XP/Hr ]
    [Profit : 1095 Gp/Hr ]
    [Profit Made : 5111 ]
    [Bars made : 5111 ]
    [Debug none ]

  13. #363
    Join Date
    May 2007
    Location
    England/Liverpool
    Posts
    1,004
    Mentioned
    9 Post(s)
    Quoted
    106 Post(s)

    Default

    Just updated a few things will had detection for already full coalbag next time had a few bugs with it tested for only 40 minutes worked flawless.

    Let me know what you guys think hopefully level up bug is fixed...

  14. #364
    Join Date
    Dec 2011
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    EDIT: now it does withdraw 10 mithril ores, is this because of the small update?
    If so, thanks

    1 more thing tho (again for the mithril + coal option), when it banks the mithril bars, it also banks the last 2 coal ores. This is not very human like..

    And how can I use a smelting urn?

    Thanks

  15. #365
    Join Date
    May 2007
    Location
    England/Liverpool
    Posts
    1,004
    Mentioned
    9 Post(s)
    Quoted
    106 Post(s)

    Default

    Quote Originally Posted by Nvidia9300 View Post
    EDIT: now it does withdraw 10 mithril ores, is this because of the small update?
    If so, thanks

    1 more thing tho (again for the mithril + coal option), when it banks the mithril bars, it also banks the last 2 coal ores. This is not very human like..

    And how can I use a smelting urn?

    Thanks
    I will fix that deposit bug later but about the URN Support i removed awhile ago due non many people actually using it for Urn's

  16. #366
    Join Date
    Dec 2011
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by CRU1Z1N View Post
    I will fix that deposit bug later but about the URN Support i removed awhile ago due non many people actually using it for Urn's

    Oh :/ But if you add the urns again you don't even have to fix the deposit bug, since you lose 2 coals with 1 urn.. (1 in the coal bag and 1 in the invent)

    +it's some nice xp 150 each urn


    [Magic xp : 35616 ]
    [Magic : 56014 Mage XP/Hr ]
    [Smith : 17966 Smith XP/Hr ]
    [Profit : 264220 Gp/Hr ]
    [Profit Made : 168000 ]
    [Bars made : 672 ]
    [Making : 1056 Bars/ph ]
    [Debug none ]
    Last edited by Nvidia9300; 12-29-2011 at 08:51 PM.

  17. #367
    Join Date
    Dec 2011
    Posts
    17
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default HelP!

    No one replied to my eariler post, is it cause there is no answer?! This is what i had an issue with:

    Quote Originally Posted by Kunny View Post
    Hey I been tryin to do addy but it doesnt work. Everything starts up fine, logs into rs, opens bank but doesnt withdraw anything. Stuck in a loop of opening and closing bank.

    I know for a fact that this script works, i done maybe 30k steel bars already, works well except the lvl up bug. Not sure why this is happening, set up is the same as steel except addy ore in bank slot 1 instead of iron. Any ideas? I really wanted to do addy, steel bars to 99 takes way to long

    Also, this all worked on the 'UltraSteel CoalBag Heater quick fix' script. When I try the other ones, it doesnt work. Is that the latest script or is there a better one with a fix?

    Proggy from steel bars here, just to show that it does work properly:

  18. #368
    Join Date
    Dec 2011
    Posts
    99
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    I have found a really annoying bug... the script keeps running for a fixed amount of time (like 50 minutes) then it says 'succesfully executed' and it shuts down.. does anyone know how to fix this?

  19. #369
    Join Date
    Dec 2011
    Posts
    19
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    It doesnt open to bank! The superheating is fine, but when it needs to bank it trys to search but never does open!

  20. #370
    Join Date
    May 2007
    Location
    England/Liverpool
    Posts
    1,004
    Mentioned
    9 Post(s)
    Quoted
    106 Post(s)

    Default

    Please re download fixed fixed a few mentioned bugs

  21. #371
    Join Date
    Dec 2011
    Posts
    19
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Very impressive script. I have started a pure and it has 85 magic already. Will post proggy when I return.

  22. #372
    Join Date
    Dec 2011
    Posts
    19
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by CRU1Z1N View Post
    Please re download fixed fixed a few mentioned bugs
    Which one?? It still isnt work

  23. #373
    Join Date
    Dec 2011
    Posts
    44
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    [--------------- Cru!z!ns Ultra SuperHeater Smelter --------------]
    [ Ran for 1 Hours, 22 Minutes and 5 Seconds]
    [Magic xp : 103615 ]
    [Magic : 75738 Mage XP/Hr ]
    [Smith : 24293 Smith XP/Hr ]
    [Profit : 142903 Gp/Hr ]
    [Profit Made : 195500 ]
    [Bars made : 1955 ]
    [Making : 1429 Bars/ph ]
    [Debug none

  24. #374
    Join Date
    Dec 2011
    Posts
    19
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    When its trying to click on any bank even soul wars this pops up in the debug

    Code:
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong xs to a finder function: -16. That is b
    elow 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: Warning! You passed a wrong ys to a finder function: -5. That is be
    low 0, thus out of bounds. Setting the value to 0 for now.
    formWriteln: failed Banking sorry.......

  25. #375
    Join Date
    Dec 2011
    Posts
    99
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    [--------------- Cru!z!ns Steel Smelter --------------]
    [ Ran for 4 Hours, 39 Minutes and 26 Seconds]
    [Magic xp : 263145 ]
    [Magic : 56502 Mage XP/Hr ]
    [Smith : 18123 Smith XP/Hr ]
    [Profit : 1066 Gp/Hr ]
    [Profit Made : 4965 ]
    [Bars made : 4965 ]
    [Debug none

Page 15 of 28 FirstFirst ... 5131415161725 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •