Page 1 of 3 123 LastLast
Results 1 to 25 of 62

Thread: Too Much Tabbage Full

  1. #1
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default Too Much Tabbage Full

    Tele-Tabber FULL
    Current version: 1.o Released
    Status: Working


    I decided to release this script to the public, because I no longer have a reason to keep it Members+ because I do not use it and profits are dropping. Some friendly competition won't hurt the other Tele-Tabbers either
    I will update the script with an updated SRL commits once the variables I requested have been added.


    What Does It Do?
    • Uses SRL-5
    • Creates tele-tabs for deh epic moneyz
    • Makes ANY tabs using an Eagle Lectern
    • Supports both Demon butler and Regular butler


    How To Use It
    1. MAKE SURE YOU HAVE SRL 5
    2. Script must be started while logged in at the spot shown, Just start the script, wait for SMART to load, pause, then resume when you are logged in and ready.
    3. Wear an whatever staff you need and have a decent amount of money in your money pouch to pay off the dumb butlers
    4. Have inventory set up as shown (only the noted soft clay must be in the exact spot, the runes can differ), runes for your desired spell can change in location
    5. Try not to wear white or grey clothing, or red/maroon as I use those colors for TPA's and sorted from MSCX,MSCY so clothing will interfere and slow you down
    6. Fill out the DeclarePlayers(information in the script)
    7. Fill out SRL Stats
    8. Hit run, and leave me feedback


    The position of the room itself shouldn't matter too much, just start with the butler next to you, I sorted all ATPA's from specific points so that other colors won't interfere




    Features
    • 100% Color
    • Painted Object Finding so you know what the bot sees!
    • SRL Stats
    • De Moneyz
    • Flight's HumanMMouse


    Bugs
    • NPC Chat is iffy, but works
    • I did not create failsafes for if you run out of runes and/or clay, so have a bunch
    • Profit/Hour calculation might be off for the first few inventories, I'm contemplating having it update after every tab made to have it more accurate.
    • I did not test any tabs besides House tabs, but on principal they should work, Regular Butler is untested aswell.



    Progress Report:
    =+=+=+=+=+=+=+==+=+=+=+=+=+=+==+=+=+=+=+=+=+=
    =+=+=+   Tele-Tabber 1.1 by PatDuffy
    =+=+=+=+=+=+=+==+=+=+=+=+=+=+==+=+=+=+=+=+=+=
     Time Running: 3 Hours, 58 Minutes and 50 Seconds
     Tablets Made: 2477
     Magic Exp Gained: 74310
     Profit Made: 1951876
     Profit/Hour: 490010
    =+=+=+=+=+=+=+==+=+=+=+=+=+=+==+=+=+=+=+=+=+=


    ChangeLog
    V1_1
    ~Added Auto-Updater
    ~Fixed wait times for regular butler





    Donate to help support future development for this and other member's scripts. RS membership doesn't buy itself!
    Last edited by PatDuffy; 01-08-2012 at 04:26 PM.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  2. #2
    Join Date
    Nov 2011
    Posts
    1,589
    Mentioned
    9 Post(s)
    Quoted
    17 Post(s)

    Default

    Woot Yay
    Might try and get high enough to use it
    Mat



    ^^

  3. #3
    Join Date
    Feb 2006
    Location
    Tracy/Davis, California
    Posts
    12,631
    Mentioned
    135 Post(s)
    Quoted
    418 Post(s)

    Default

    Not sure if you want to release a tele tabber to public, I think it was done before and prices crashed....
    Sweet script, nice $!

  4. #4
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by YoHoJo View Post
    Not sure if you want to release a tele tabber to public, I think it was done before and prices crashed....
    Sweet script, nice $!
    The other one was removed for like 2 days because he was fixing it, but it's back up. I see no reason why I should not, the other one is out there so might aswell get some use out of my script since I made it

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  5. #5
    Join Date
    Feb 2009
    Posts
    484
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    Great to see a release, Pat!

    Did you get those PMs I sent you back? I sent you two.

    As for the NPC Chat, why are they even needed in your script? To pay the demon? Just using ClickContinue is much easier.
    Click Here for my PUBLIC script: Auto Tabs Pro

  6. #6
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by Yanhua View Post
    Great to see a release, Pat!

    Did you get those PMs I sent you back? I sent you two.

    As for the NPC Chat, why are they even needed in your script? To pay the demon? Just using ClickContinue is much easier.
    No I didn't get either of them..

    That must have been within the last ~10 days, my account here was messed up due to VBulletin and I lost all of the PM's I received during that timespan.

    And yea, I used NPC Chat to return a boolean if the servant needs to be payed, aswell as a failsafe for interaction incase my ClickContinue's and other coordinate based chat functions fail.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  7. #7
    Join Date
    May 2007
    Posts
    12
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    I can't seem to get this script working, it finds the lectern but it won't actually make the tab. It clicks right under the camelot tab.

  8. #8
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by XXXxxx View Post
    I can't seem to get this script working, it finds the lectern but it won't actually make the tab. It clicks right under the camelot tab.
    Ahh I shall look into that, as I went by principal alone for the making of any tabs besides house tabs. May I ask what lectern you are using, and what speed(fast,hybrid,slow)?

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  9. #9
    Join Date
    May 2007
    Posts
    12
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    I tried both fast and slow. I am using the eagle lectern

  10. #10
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Updated the script with new values for the coordinates for each tab to use with MouseBox. Please download the new script and tell me if that works, I narrowed the box a little so that it's more fine-tuned as to the position.

    Didn't test this as I don't have any soft clay to spare, but once again it should work

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  11. #11
    Join Date
    May 2007
    Posts
    12
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Got an error saying
    "Warning in GaussBox: Point invalid <256, 251>"

  12. #12
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    What the heck....I'll take a third look at it, although I didn't get an error when I compiled.

    I'm just going to edit this post when it's updated again if I deem it's actually an error in the script, which it very well might be.

    EDIT: Yeap you were right, fixing the numbers again
    Last edited by PatDuffy; 01-05-2012 at 12:53 AM.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  13. #13
    Join Date
    May 2007
    Posts
    12
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Well, it may be that I didn't update SRL5 correctly, but that error pops up only after finding the lectern.

    Thanks a lot though!

  14. #14
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Updated it again, turns out all of the second points were messed up because I had forgotton to re-target the client after I obtained the first coordinate to use in MouseBox.

    I hate Simba sometimes

    And it DOES work, I actually tested it myself this time.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  15. #15
    Join Date
    Dec 2011
    Posts
    24
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    the bot have problems with finding the tab keeps missclicking it. It will be great if u fix this.
    EDIT : Works , anyway the fast way is slower then the slow way lol
    Last edited by owner5; 01-05-2012 at 01:10 AM.

  16. #16
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Its at the bottom of the first post, I updated it with the fix for the fix

    It does work this time

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  17. #17
    Join Date
    May 2007
    Posts
    12
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Working now, thanks again!

  18. #18
    Join Date
    Dec 2011
    Posts
    24
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    patduffy u only need to make the fast way faster because its slower then the slow way =P i just tested

  19. #19
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by owner5 View Post
    patduffy u only need to make the fast way faster because its slower then the slow way =P i just tested
    I think that the way tabs were made was changed since I created those methods, I'm not going to update the script again tonight, but I'll add that to the main post so as not to confuse others.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  20. #20
    Join Date
    Dec 2011
    Posts
    24
    Mentioned
    0 Post(s)
    Quoted
    1 Post(s)

    Default

    ye i just test it by myself , the fast methode doesn't work anymore anyway , i was doing it in buildmode and sometimes the bot will flash and keeps clicking other spots with same colours/codes i think?

  21. #21
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Quote Originally Posted by owner5 View Post
    ye i just test it by myself , the fast methode doesn't work anymore anyway , i was doing it in buildmode and sometimes the bot will flash and keeps clicking other spots with same colours/codes i think?
    It wasn't designed to do in building mode, the colors for the lectern will conflict with the colors on the walls and such.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  22. #22
    Join Date
    Dec 2011
    Posts
    28
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Hi, I'm using your script under the "Fast" setting. The problem I encounter occasionally is that the script doesn't notice the Demon Butler when it needs to refill on clay because it has the options open menu on the Lectern. This causes the script to just sit there searching for the Demon Butler to no end. Here is a screenshot to help describe the situation:



    I marked where the Demon Butler can generally stand. The option remains open as the mouse is rested on top of it. So at this point, the script searches for the butler but cannot find him since the menu rests on top of him. I fixed this by turning my camera a total 180 degrees from the location of that screenshot. I just thought I'd inform you to see if there was anything you'd like to do about it or if you think it's fine as is. You could potentially throw in some camera turning commands but that might mess with the lectern finder a bit. I'm know very little/almost nothing about coding so this is the best I could do to describe the situation to you lol.

    EDIT: After watching it a bit more, this problem seems to occur right before asking the butler to gather more clay. It seems that the script right clicks right before moving to the butler or before reaching the butler which would pop up that menu which you see in the screenshot. I noticed that when the butler returns, if the menu is covering up the Lectern, the player will click off to the side and start walking in order to find the lectern. Adding the same command to finding the Demon Butler could fix the issue I think.
    Last edited by Herosoul; 01-05-2012 at 05:45 AM.

  23. #23
    Join Date
    Feb 2011
    Location
    Earth
    Posts
    1,784
    Mentioned
    1 Post(s)
    Quoted
    0 Post(s)

    Default

    Shouldn't be too hard to fix that, ill just change it to 1 click the lectern, which I though I already did. I'm going to be editing the different speeds today aswell, since the way tabs were made has changed since I made the script. This all will be after school today, so in like 10 ish hours expect an update.

    Currently: Working on Defending&Attacking in my Castle-Wars Script
    Project Rebuild: 90M/170M

  24. #24
    Join Date
    Dec 2011
    Posts
    28
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Alright, sweet. I imagine that I'll be using this for a while so I'll definitely provide feedback and proggies with your new update.

  25. #25
    Join Date
    Dec 2011
    Posts
    88
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    nice to see this script moved to public

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •