Results 1 to 4 of 4

Thread: Still having an issue or two

  1. #1
    Join Date
    Feb 2012
    Location
    Canada
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default Still having an issue or two

    edit: I just realized I posted in the leecher section of the forums and didn't even realize it. I don't intend on just getting help and leaving. I plan on continuing using the scripts and testing them, providing feedback and maybe if I can learn a few things or two while I'm here.


    Well I finally setup everything properly and read just about every FAQ a few times each and I'm still having two reoccurring issues.

    The first of the two issues which are currently known issues [bitmap10] and [bitmap22] errors like 90% of the time I tried to run a script. The other issue is when for some reason my character just won't cut trees down. When finally SIMBA doesn't get a [bitmap#] error, the SMART logs in for me and chooses my world just fine. I also placed my character at Draynor Normals (woodcutting) shown on the map provided in the Woodcutting script page before I log on so there would be no issue. I get in and random tabs are being clicked and then the program goes straight to logging out and then I get this.

    Code:
    Status: /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\
    Status: |     SRL Randoms Report       |
    Status: |       www.villavu.com        |
    Status: |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
    Status: \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/
    {----------------------------------------------------------------}
    {                    MSI Phoenix Short Report                    }
    {----------------------------------------------------------------}
    {     Time Running: 1 Minutes and 55 Seconds                     }
    {----------------------------------------------------------------}
    {                                                                }
    {        Totals:                                                 }
    {         - Players:           1                                 }
    {         - Player Time:       00s                               }
    {                                                                }
    {----------------------------------------------------------------}
    {----------------------------------------------------------------}
    
    {----------------------------------------------------------------}
    {                    MSI Phoenix Player Report                   }
    {----------------------------------------------------------------}
    {     Time Running: 1 Minutes and 55 Seconds                     }
    {----------------------------------------------------------------}
    {                                                                }
    {     Player 0: Insertnamehere                     }
    {     Location: Powerskilling                                    }
    {     Time:     00s                                              }
    {     Active:   False                                            }
    {       Reason: Failed to setup player                           }
    {                                                                }
    {     Script: Powerchopper                                       }
    {       Time:  00s                                               }
    {       Skill: Woodcutting                                       }
    {       Exp:   0                                                 }
    {       Level: 9                                                 }
    {       Loads: 0                                                 }
    {                                                                }
    {----------------------------------------------------------------}
    {----------------------------------------------------------------}

    edit: Also I'm apparently getting this error too when I do MSI > Run.

    Code:
    Running MSI...
    ERROR in TMThread.LoadFile
    Exception in Script: Unable to find file 'C:\Simba\Includes\SRL/SRL/core/math.simba' used from 'C:\Simba\Includes\srl/srl.simba'
    Last edited by uwscss; 02-22-2012 at 08:20 AM.
    All stars could be brighter. All hearts could be warmer.

  2. #2
    Join Date
    Jan 2012
    Posts
    2,568
    Mentioned
    35 Post(s)
    Quoted
    356 Post(s)

    Default

    1. set ur rs to lowest resolution/quality and safe mode.
    2. post debug what it says before it log u out? u probably dont have a hatchet with u so the script log u out as setup player failed.
    3. try MSI>Open>Run instead, directly choosing Run often result in this error
    4. in the future pls post at http://villavu.com/forum/forumdisplay.php?f=184 instead
    5. other than reading FAQs try use the forum search function; most of ur issues can be found using that.

  3. #3
    Join Date
    Feb 2012
    Location
    Canada
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    So this is what is basically happening to me when the script runs. I am able to chop down 2 trees at most before it stops moving and just clicks the Stats and Inventory tab back and forth for a while, then the red pixel tries to click on some trees but it never lines up properly. Also, I have a hatchet in my inventory, all my resolution, brightness and other settings are set to the lowest.

    Code:
    [0:11:40]: [  ] ------ Found: 2, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 16, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 22, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 3, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 3, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 5, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 4, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 10, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 4, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 11, NOT ENOUGH
    [0:11:40]: [  ] ------ Found: 9, NOT ENOUGH
    [0:11:40]: [  ] ------ Took 125 ms to complete
    [0:11:40]: [  ] ---- MSI_FindObjectTPA: False
    [0:11:41]: [  ] ------ Scanning for randoms...
    [0:11:41]: [  ] ------ Scanning for randoms...
    [0:11:41]: [  ] ---- MSI_Relocate (Draynor Village Trees)
    [0:11:42]: [  ] -------- MSI_GetMyPos(): (4150, 3595)
    [0:11:42]: [  ] -------- MSI_BoxToMM(): (618, 57, 654, 90)
    [0:11:42]: [ ] ------ At sub-location Draynor Village Trees
    [0:11:42]: [  ] ---- MSI_Relocate: True
    [0:11:42]: [  ] ---- MSI_FindObjectTPA: TREE_NORMAL_NEW
    [0:11:42]: [  ] ------ Found: 2, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 16, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 22, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 3, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 3, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 5, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 4, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 10, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 4, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 11, NOT ENOUGH
    [0:11:42]: [  ] ------ Found: 9, NOT ENOUGH
    [0:11:42]: [  ] ------ Took 141 ms to complete
    [0:11:42]: [  ] ---- MSI_FindObjectTPA: False
    [0:11:43]: [  ] ------ Scanning for randoms...
    [0:11:43]: [  ] ------ Scanning for randoms...
    [0:11:44]: [  ] ---- MSI_Relocate (Draynor Village Trees)
    [0:11:44]: [ ] -------- MSI_GetMyPos(): (4150, 3595)
    All stars could be brighter. All hearts could be warmer.

  4. #4
    Join Date
    Feb 2012
    Location
    Canada
    Posts
    4
    Mentioned
    0 Post(s)
    Quoted
    0 Post(s)

    Default

    Anyways, figured out the problem. The PowerChopper and Draynor Normals aren't working properly. The Draynor Normals aren't in the proper spots in the script, they don't line up properly.

    edit: This thread can be closed now, I figured out what was going on.
    Last edited by uwscss; 02-23-2012 at 02:03 AM.
    All stars could be brighter. All hearts could be warmer.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •