sorry i get this error:
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(274:149): Invalid number of parameters at line 273
Compiling failed.
any ideas on a fix?
thanks
edit:::: sorry i found out how now.
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
just to let you know you have this in the setup instructions "EoC Ability bar minimized!"
also it still doesn't do full invents - is there something i should put on the ability bar?
few other minor problems:
sometimes fails to find furnace and stops script
searches for bank while smelting and before rotating the screen (right clicks randomly north of the furnace by the trees looking for bankwoman)
ahh the script juse doesnt want to work for me :/
thanks for the help
Not the ability bar, the "production" window that was added in EoC, toggle that on, I'm not sure how because I've never disabled it, maybe right click the XP icon for an option? (or try googling it), then give it a try?
As for the not finding the furnace, make sure your graphics are correct and your screen size is set to fixed, Some other people had this issue tho so i will have to investigate it when i get time
Last edited by DannyRS; 01-01-2013 at 11:41 AM.
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
i just turned this production window on
now it withdraws ore from the bank
then says
failed to see craftall
failed to see craftall
...
...
after it resets it banks the ore, with draws again. and fails to see craft all again :/
im zoomed out. production window on. ability bar minimised.
ive removed the 8 from the 3rd line where it says {$Define SMART8}
I'll have a look when i get on, but if you remove the smart 8, remove it from the first time its stated, i cant guarentee it will work on 7.2 as i only use 8 these days, it should withdraw ore, then rotate camera to see furnace, click the furnace, wait, click the window, wait till finished, then bank and repeat, double check your settings and i would recommend you re download it and dont make any changes and update to the latest smart version
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
Sorry does anyone have a link or guide for smart 8((the newest one?))
I believe its located here
http://villavu.com/forum/showthread.php?t=87801
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
Hello im getting this error report
We Failed to See The Furnace
Error: Out Of Range at line 497
The following DTMs were not freed: [SRL - Lamp bitmap, 1, 2, 3]
The following bitmaps were not freed: [SRL - Mod bitmap, SRL - Admin bitmap, SRL - Flag bitmap, SRL - NavBar Bitmap, SRL - Options Bitmap, 5, 6].
Smart V8 im using and correct graphics settings. Sometimes it will find it but most of the time it doesnt. any thoughts?
You should add iron support, gold is a deficit...
Have you felt the whale lately?
Whale so hard..__________.
thanks for the script bro 1.1b seems to be working fine
just a suggestion: it would be good if you could put varrock armour support in as this makes the invents faster. atm when i wear varrock armour and he finishes all the bars it still waits around for a while before banking, so its faster and more exp/hr
thanks
Edit: I do have some bugs
He clicks the bank too far from the furnace then fails to see the furnace and it never manages to click the first banker on the first run ... One time it did and it worked fine for 15mins then logged out – not sure why
Last edited by moloco; 01-02-2013 at 11:45 AM.
I'll have a look at a furnace finding failsafe
It should always be able to see it if you have max zoom and fog off, i was fairly sure i checked the very bottom of the bank and could still see it
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
Anti-Leech Movement Prevent Leeching Spread the word
Insanity 60 Days (Killer workout)
XoL Blog (Workouts/RS/Misc)
Programming is like trying keep a wall of shifting sand up, you fix one thing but somewhere else starts crumbling
Sorry if this was already fixed but I haven't done this in a while and cant figure out this error :
[Hint] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(264:3): Variable 'PARAMS' never used at line 263
[Error] C:\Simba\Includes\SRL/SRL/misc/SmartParams.Simba(284:3): 'BEGIN' expected at line 283
Compiling failed.
There are currently 1 users browsing this thread. (0 members and 1 guests)